Mediatek MT8183 scpsys support
v7 cover Mediatek MT8183 scpsys support
This series is based on v5.3-rc1 with MT8183 SMI dt-binding patch v11[1].
[1] [v11,01/23] dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI
(https://patchwork.kernel.org/patch/11112769/)
changes since v6:
- remove the patch of SPDX license identifier because it's already fixed
changes since v5:
- fix documentation in [PATCH 04/14]
- remove useless variable checking and reuse API of clock control in [PATCH 06/14]
- coding style fix of bus protection control in [PATCH 08/14]
- fix naming of new added data in [PATCH 09/14]
- small refactor of multiple step bus protection control in [PATCH 10/14]
changes since v4:
- add property to mt8183 smi-common
- seperate refactor patches and new add function
- add power controller device node
Weiyi Lu (13):
dt-bindings: mediatek: Add property to mt8183 smi-common
dt-bindings: soc: Add MT8183 power dt-bindings
soc: mediatek: Refactor polling timeout and documentation
soc: mediatek: Refactor regulator control
soc: mediatek: Refactor clock control
soc: mediatek: Refactor sram control
soc: mediatek: Refactor bus protection control
soc: mediatek: Add basic_clk_id to scp_power_data
soc: mediatek: Add multiple step bus protection control
soc: mediatek: Add subsys clock control for bus protection
soc: mediatek: Add extra sram control
soc: mediatek: Add MT8183 scpsys support
arm64: dts: Add power controller device node of MT8183
.../mediatek,smi-common.txt | 2 +- .../bindings/soc/mediatek/scpsys.txt | 14 + arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++ drivers/soc/mediatek/Makefile | 2 +- drivers/soc/mediatek/mtk-scpsys-ext.c | 99 +++ drivers/soc/mediatek/mtk-scpsys.c | 575 +++++++++++++++--- include/dt-bindings/power/mt8183-power.h | 26 + include/linux/soc/mediatek/scpsys-ext.h | 39 ++ 8 files changed, 741 insertions(+), 78 deletions(-) create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c create mode 100644 include/dt-bindings/power/mt8183-power.h create mode 100644 include/linux/soc/mediatek/scpsys-ext.h
PATCH v7 1/13 dt-bindings: mediatek: Add property to mt8183 smi-common
For scpsys driver using regmap based syscon driver API.
--- .../devicetree/bindings/memory-controllers/mediatek,smi-common.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt +1 -1
@@ -20,7 +20,7 @@ Required properties: "mediatek,mt2712-smi-common" "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common" "mediatek,mt8173-smi-common" - "mediatek,mt8183-smi-common" + "mediatek,mt8183-smi-common", "syscon" - reg : the register and size of the SMI block. - power-domains : a phandle to the power domain of this local arbiter. - clocks : Must contain an entry for each entry in clock-names.
Signature · 1 line
1.8.1.1.dirty
PATCH v7 2/13 dt-bindings: soc: Add MT8183 power dt-bindings
In reply to Weiyi LuAdd power dt-bindings of MT8183 and introduces "BASIC" and "SUBSYS" clock types in binding document.
The "BASIC" type is compatible to the original power control with clock name [a-z]+[0-9]*, e.g. mm, vpu1.
The "SUBSYS" type is used for bus protection control with clock name [a-z]+-[0-9]+, e.g. isp-0, cam-1.
--- .../devicetree/bindings/soc/mediatek/scpsys.txt | 14 ++++++++++++ include/dt-bindings/power/mt8183-power.h | 26 ++++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 include/dt-bindings/power/mt8183-power.h
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +14 -0
@@ -14,6 +14,7 @@ power/power_domain.txt. It provides the power domains defined in - include/dt-bindings/power/mt2701-power.h - include/dt-bindings/power/mt2712-power.h - include/dt-bindings/power/mt7622-power.h +- include/dt-bindings/power/mt8183-power.h Required properties: - compatible: Should be one of:
@@ -25,18 +26,31 @@ Required properties: - "mediatek,mt7623a-scpsys": For MT7623A SoC - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC - "mediatek,mt8173-scpsys" + - "mediatek,mt8183-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit - infracfg: must contain a phandle to the infracfg controller - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains. + The new clock type "BASIC" belongs to the type above. + As to the new clock type "SUBSYS" needs to be + enabled before releasing bus protection. Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622 or MT7629: "hif_sel" Required clocks for MT7623A: "ethif" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" + Required clocks for MT8183: BASIC: "audio", "mfg", "mm", "cam", "isp", + "vpu", "vpu1", "vpu2", "vpu3" + SUBSYS: "mm-0", "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", "mm-7", + "mm-8", "mm-9", "isp-0", "isp-1", + "cam-0", "cam-1", "cam-2", "cam-3", + "cam-4", "cam-5", "cam-6", "vpu-0", + "vpu-1", "vpu-2", "vpu-3", "vpu-4", + "vpu-5" Optional properties: - vdec-supply: Power supply for the vdec power domain
include/dt-bindings/power/mt8183-power.h new file +26 -0
@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 +* +* Copyright (c) 2018 MediaTek Inc. +* Author: Weiyi Lu <[email protected]> +*/ + +#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H +#define _DT_BINDINGS_POWER_MT8183_POWER_H + +#define MT8183_POWER_DOMAIN_AUDIO 0 +#define MT8183_POWER_DOMAIN_CONN 1 +#define MT8183_POWER_DOMAIN_MFG_ASYNC 2 +#define MT8183_POWER_DOMAIN_MFG 3 +#define MT8183_POWER_DOMAIN_MFG_CORE0 4 +#define MT8183_POWER_DOMAIN_MFG_CORE1 5 +#define MT8183_POWER_DOMAIN_MFG_2D 6 +#define MT8183_POWER_DOMAIN_DISP 7 +#define MT8183_POWER_DOMAIN_CAM 8 +#define MT8183_POWER_DOMAIN_ISP 9 +#define MT8183_POWER_DOMAIN_VDEC 10 +#define MT8183_POWER_DOMAIN_VENC 11 +#define MT8183_POWER_DOMAIN_VPU_TOP 12 +#define MT8183_POWER_DOMAIN_VPU_CORE0 13 +#define MT8183_POWER_DOMAIN_VPU_CORE1 14 + +#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
Signature · 1 line
1.8.1.1.dirty
Matthias Brugger
maintainerRe: [PATCH v7 02/13] dt-bindings: soc: Add MT8183 power dt-bindings
Quoted 30 lines · Weiyi Lu
Add power dt-bindings of MT8183 and introduces "BASIC" and "SUBSYS" clock types in binding document.
The "BASIC" type is compatible to the original power control with clock name [a-z]+[0-9]*, e.g. mm, vpu1.
The "SUBSYS" type is used for bus protection control with clock name [a-z]+-[0-9]+, e.g. isp-0, cam-1.Signed-off-by Weiyi Lu <[email protected]>--- .../devicetree/bindings/soc/mediatek/scpsys.txt | 14 ++++++++++++ include/dt-bindings/power/mt8183-power.h | 26 ++++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 include/dt-bindings/power/mt8183-power.hDocumentation/devicetree/bindings/soc/mediatek/scpsys.txt +1
-0@@ -14,6 +14,7 @@ power/power_domain.txt. It provides the power domains defined in - include/dt-bindings/power/mt2701-power.h - include/dt-bindings/power/mt2712-power.h - include/dt-bindings/power/mt7622-power.h +- include/dt-bindings/power/mt8183-power.h Required properties: - compatible: Should be one of:@@ -25,18 +26,31 @@ Required properties: - "mediatek,mt7623a-scpsys": For MT7623A SoC - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC - "mediatek,mt8173-scpsys"
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt Required properties: · line 38
Quoted 10 lines
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +4
-0+ - "mediatek,mt8183-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit - infracfg: must contain a phandle to the infracfg controller - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains. + The new clock type "BASIC" belongs to the type above. + As to the new clock type "SUBSYS" needs to be + enabled before releasing bus protection.
The new clock type won't be new in a couple of month, better reword this. E.g.:
Some SoCs have to groups of clocks. BASIC clocks need to be enabled before enabling the corresponding power domain. SUBSYS clocks need to be enabled before releasing the bus protection.
Quoted 51 lines
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +9
-0Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622 or MT7629: "hif_sel" Required clocks for MT7623A: "ethif" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" + Required clocks for MT8183: BASIC: "audio", "mfg", "mm", "cam", "isp", + "vpu", "vpu1", "vpu2", "vpu3" + SUBSYS: "mm-0", "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", "mm-7", + "mm-8", "mm-9", "isp-0", "isp-1", + "cam-0", "cam-1", "cam-2", "cam-3", + "cam-4", "cam-5", "cam-6", "vpu-0", + "vpu-1", "vpu-2", "vpu-3", "vpu-4", + "vpu-5" Optional properties: - vdec-supply: Power supply for the vdec power domaininclude/dt-bindings/power/mt8183-power.h new file +26
-0@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 +* +* Copyright (c) 2018 MediaTek Inc. +* Author: Weiyi Lu <[email protected]> +*/ + +#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H +#define _DT_BINDINGS_POWER_MT8183_POWER_H + +#define MT8183_POWER_DOMAIN_AUDIO 0 +#define MT8183_POWER_DOMAIN_CONN 1 +#define MT8183_POWER_DOMAIN_MFG_ASYNC 2 +#define MT8183_POWER_DOMAIN_MFG 3 +#define MT8183_POWER_DOMAIN_MFG_CORE0 4 +#define MT8183_POWER_DOMAIN_MFG_CORE1 5 +#define MT8183_POWER_DOMAIN_MFG_2D 6 +#define MT8183_POWER_DOMAIN_DISP 7 +#define MT8183_POWER_DOMAIN_CAM 8 +#define MT8183_POWER_DOMAIN_ISP 9 +#define MT8183_POWER_DOMAIN_VDEC 10 +#define MT8183_POWER_DOMAIN_VENC 11 +#define MT8183_POWER_DOMAIN_VPU_TOP 12 +#define MT8183_POWER_DOMAIN_VPU_CORE0 13 +#define MT8183_POWER_DOMAIN_VPU_CORE1 14 + +#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
Re: [PATCH v7 02/13] dt-bindings: soc: Add MT8183 power dt-bindings
Quoted 39 lines · Matthias Brugger
Quoted 37 lines · Weiyi Lu
Add power dt-bindings of MT8183 and introduces "BASIC" and "SUBSYS" clock types in binding document.
The "BASIC" type is compatible to the original power control with clock name [a-z]+[0-9]*, e.g. mm, vpu1.
The "SUBSYS" type is used for bus protection control with clock name [a-z]+-[0-9]+, e.g. isp-0, cam-1.Signed-off-by Weiyi Lu <[email protected]>--- .../devicetree/bindings/soc/mediatek/scpsys.txt | 14 ++++++++++++ include/dt-bindings/power/mt8183-power.h | 26 ++++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 include/dt-bindings/power/mt8183-power.hDocumentation/devicetree/bindings/soc/mediatek/scpsys.txt +2
-0@@ -14,6 +14,7 @@ power/power_domain.txt. It provides the power domains defined in - include/dt-bindings/power/mt2701-power.h - include/dt-bindings/power/mt2712-power.h - include/dt-bindings/power/mt7622-power.h +- include/dt-bindings/power/mt8183-power.h Required properties: - compatible: Should be one of:@@ -25,18 +26,31 @@ Required properties: - "mediatek,mt7623a-scpsys": For MT7623A SoC - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC - "mediatek,mt8173-scpsys" + - "mediatek,mt8183-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit - infracfg: must contain a phandle to the infracfg controller - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains.
Quoted 9 lines
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt Required properties: · line 38
Quoted 3 lines
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +3
-0+ The new clock type "BASIC" belongs to the type above. + As to the new clock type "SUBSYS" needs to be + enabled before releasing bus protection.The new clock type won't be new in a couple of month, better reword this. E.g.:
Some SoCs have to groups of clocks. BASIC clocks need to be enabled before enabling the corresponding power domain. SUBSYS clocks need to be enabled before releasing the bus protection.
Got it, I'll reword in next version. Many thanks.
Quoted 51 lines
Quoted 51 lines
Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +9
-0Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622 or MT7629: "hif_sel" Required clocks for MT7623A: "ethif" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" + Required clocks for MT8183: BASIC: "audio", "mfg", "mm", "cam", "isp", + "vpu", "vpu1", "vpu2", "vpu3" + SUBSYS: "mm-0", "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", "mm-7", + "mm-8", "mm-9", "isp-0", "isp-1", + "cam-0", "cam-1", "cam-2", "cam-3", + "cam-4", "cam-5", "cam-6", "vpu-0", + "vpu-1", "vpu-2", "vpu-3", "vpu-4", + "vpu-5" Optional properties: - vdec-supply: Power supply for the vdec power domaininclude/dt-bindings/power/mt8183-power.h new file +26
-0@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 +* +* Copyright (c) 2018 MediaTek Inc. +* Author: Weiyi Lu <[email protected]> +*/ + +#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H +#define _DT_BINDINGS_POWER_MT8183_POWER_H + +#define MT8183_POWER_DOMAIN_AUDIO 0 +#define MT8183_POWER_DOMAIN_CONN 1 +#define MT8183_POWER_DOMAIN_MFG_ASYNC 2 +#define MT8183_POWER_DOMAIN_MFG 3 +#define MT8183_POWER_DOMAIN_MFG_CORE0 4 +#define MT8183_POWER_DOMAIN_MFG_CORE1 5 +#define MT8183_POWER_DOMAIN_MFG_2D 6 +#define MT8183_POWER_DOMAIN_DISP 7 +#define MT8183_POWER_DOMAIN_CAM 8 +#define MT8183_POWER_DOMAIN_ISP 9 +#define MT8183_POWER_DOMAIN_VDEC 10 +#define MT8183_POWER_DOMAIN_VENC 11 +#define MT8183_POWER_DOMAIN_VPU_TOP 12 +#define MT8183_POWER_DOMAIN_VPU_CORE0 13 +#define MT8183_POWER_DOMAIN_VPU_CORE1 14 + +#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
PATCH v7 3/13 soc: mediatek: Refactor polling timeout and documentation
In reply to Weiyi LuUse USEC_PER_SEC to indicate the polling timeout directly. And add documentation of scp_domain_data.
--- drivers/soc/mediatek/mtk-scpsys.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/soc/mediatek/mtk-scpsys.c +12 -1
@@ -21,7 +21,7 @@#include <dt-bindings/power/mt8173-power.h> #define MTK_POLL_DELAY_US 10 -#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) +#define MTK_POLL_TIMEOUT USEC_PER_SEC#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)#define MTK_SCPD_FWAIT_SRAM BIT(1)
@@ -108,6 +108,17 @@ enum clk_id {#define MAX_CLKS 3 +/** +* struct scp_domain_data - scp domain data for power on/off flow +* @name: The domain name. +* @sta_mask: The mask for power on/off status bit. +* @ctl_offs: The offset for main power control register. +* @sram_pdn_bits: The mask for sram power control bits. +* @sram_pdn_ack_bits: The mask for sram power control acked bits. +* @bus_prot_mask: The mask for single step bus protection. +* @clk_id: The basic clocks required by this power domain. +* @caps: The flag for active wake-up action. +*/ struct scp_domain_data {const char *name;u32 sta_mask;
Signature · 1 line
1.8.1.1.dirty
Re: [PATCH v7 03/13] soc: mediatek: Refactor polling timeout and documentation
Quoted 5 lines · Weiyi Lu
Use
USEC_PER_SECto indicate the polling timeout directly. And add documentation ofscp_domain_data.Signed-off-by Weiyi Lu <[email protected]>---
Queued for v5.4-next/soc
Thanks!
Quoted 35 lines
drivers/soc/mediatek/mtk-scpsys.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)drivers/soc/mediatek/mtk-scpsys.c +12
-1@@ -21,7 +21,7 @@#include <dt-bindings/power/mt8173-power.h> #define MTK_POLL_DELAY_US 10 -#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) +#define MTK_POLL_TIMEOUT USEC_PER_SEC#define MTK_SCPD_ACTIVE_WAKEUP BIT(0)#define MTK_SCPD_FWAIT_SRAM BIT(1)@@ -108,6 +108,17 @@ enum clk_id {#define MAX_CLKS 3 +/** +* struct scp_domain_data - scp domain data for power on/off flow +* @name: The domain name. +* @sta_mask: The mask for power on/off status bit. +* @ctl_offs: The offset for main power control register. +* @sram_pdn_bits: The mask for sram power control bits. +* @sram_pdn_ack_bits: The mask for sram power control acked bits. +* @bus_prot_mask: The mask for single step bus protection. +* @clk_id: The basic clocks required by this power domain. +* @caps: The flag for active wake-up action. +*/ struct scp_domain_data {const char *name;u32 sta_mask;
PATCH v7 4/13 soc: mediatek: Refactor regulator control
In reply to Weiyi LuPut regulator enable and disable control in separate functions.
--- drivers/soc/mediatek/mtk-scpsys.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +23 -9
@@ -191,6 +191,22 @@ static int scpsys_domain_is_on(struct scp_domain *scpd)return -EINVAL ; } +static int scpsys_regulator_enable (struct scp_domain *scpd) +{ +if (!scpd->supply) +return 0 ; + +return regulator_enable (scpd->supply); +} + +static int scpsys_regulator_disable (struct scp_domain *scpd) +{ +if (!scpd->supply) +return 0 ; + +return regulator_disable (scpd->supply); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -201,11 +217,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)int ret, tmp;int i; -if (scpd->supply) { - ret =regulator_enable (scpd->supply); -if (ret) -return ret; - } + ret =scpsys_regulator_enable (scpd); +if (ret <0 ) +return ret;for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) { ret =clk_prepare_enable (scpd->clk[i]);
@@ -273,8 +287,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)clk_disable_unprepare (scpd->clk[i]); } err_clk: -if (scpd->supply) -regulator_disable (scpd->supply); +scpsys_regulator_disable (scpd);dev_err (scp->dev,"Failed to power on domain %s\n" , genpd->name);
@@ -333,8 +346,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++)clk_disable_unprepare (scpd->clk[i]); -if (scpd->supply) -regulator_disable (scpd->supply); + ret =scpsys_regulator_disable (scpd); +if (ret <0 ) + goto out;return 0 ;
Signature · 1 line
1.8.1.1.dirty
Re: [PATCH v7 04/13] soc: mediatek: Refactor regulator control
Quoted 3 lines · Weiyi Lu
Put regulator enable and disable control in separate functions.
Signed-off-by Weiyi Lu <[email protected]>
Applied to v5.4-next/soc
Thanks!
Quoted 69 lines
--- drivers/soc/mediatek/mtk-scpsys.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-)drivers/soc/mediatek/mtk-scpsys.c +23
-9@@ -191,6 +191,22 @@ static int scpsys_domain_is_on(struct scp_domain *scpd)return -EINVAL ; } +static int scpsys_regulator_enable (struct scp_domain *scpd) +{ +if (!scpd->supply) +return 0 ; + +return regulator_enable (scpd->supply); +} + +static int scpsys_regulator_disable (struct scp_domain *scpd) +{ +if (!scpd->supply) +return 0 ; + +return regulator_disable (scpd->supply); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);@@ -201,11 +217,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)int ret, tmp;int i; -if (scpd->supply) { - ret =regulator_enable (scpd->supply); -if (ret) -return ret; - } + ret =scpsys_regulator_enable (scpd); +if (ret <0 ) +return ret;for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) { ret =clk_prepare_enable (scpd->clk[i]);@@ -273,8 +287,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)clk_disable_unprepare (scpd->clk[i]); } err_clk: -if (scpd->supply) -regulator_disable (scpd->supply); +scpsys_regulator_disable (scpd);dev_err (scp->dev,"Failed to power on domain %s\n" , genpd->name);@@ -333,8 +346,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++)clk_disable_unprepare (scpd->clk[i]); -if (scpd->supply) -regulator_disable (scpd->supply); + ret =scpsys_regulator_disable (scpd); +if (ret <0 ) + goto out;return 0 ;
PATCH v7 5/13 soc: mediatek: Refactor clock control
In reply to Weiyi LuPut clock enable and disable control in separate function.
--- drivers/soc/mediatek/mtk-scpsys.c | 45 ++++++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 17 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +28 -17
@@ -207,6 +207,29 @@ static int scpsys_regulator_disable(struct scp_domain *scpd)return regulator_disable (scpd->supply); } +static void scpsys_clk_disable (struct clk *clk[],int max_num) +{ +int i; + +for (i = max_num -1 ; i >=0 ; i--) +clk_disable_unprepare (clk[i]); +} + +static int scpsys_clk_enable (struct clk *clk[],int max_num) +{ +int i, ret =0 ; + +for (i =0 ; i < max_num && clk[i]; i++) { + ret =clk_prepare_enable (clk[i]); +if (ret) { +scpsys_clk_disable (clk, i); +break ; + } + } + +return ret; +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -215,21 +238,14 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp; -int i; ret =scpsys_regulator_enable (scpd);if (ret <0 )return ret; -for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) { - ret =clk_prepare_enable (scpd->clk[i]); -if (ret) { -for (--i; i >=0 ; i--) -clk_disable_unprepare (scpd->clk[i]); - - goto err_clk; - } - } + ret =scpsys_clk_enable (scpd->clk,MAX_CLKS ); +if (ret) + goto err_clk; val =readl (ctl_addr); val |=PWR_ON_BIT ;
@@ -282,10 +298,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)return 0 ; err_pwr_ack: -for (i =MAX_CLKS -1 ; i >=0 ; i--) { -if (scpd->clk[i]) -clk_disable_unprepare (scpd->clk[i]); - } +scpsys_clk_disable (scpd->clk,MAX_CLKS ); err_clk:scpsys_regulator_disable (scpd);
@@ -302,7 +315,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp; -int i;if (scpd->data->bus_prot_mask) { ret = mtk_infracfg_set_bus_protection(scp->infracfg,
@@ -343,8 +355,7 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)if (ret <0 ) goto out; -for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) -clk_disable_unprepare (scpd->clk[i]); +scpsys_clk_disable (scpd->clk,MAX_CLKS ); ret =scpsys_regulator_disable (scpd);if (ret <0 )
Signature · 1 line
1.8.1.1.dirty
Re: [PATCH v7 05/13] soc: mediatek: Refactor clock control
Quoted 3 lines · Weiyi Lu
Put clock enable and disable control in separate function.
Signed-off-by Weiyi Lu <[email protected]>
Applied, thanks!
Quoted 94 lines
--- drivers/soc/mediatek/mtk-scpsys.c | 45 ++++++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 17 deletions(-)drivers/soc/mediatek/mtk-scpsys.c +28
-17@@ -207,6 +207,29 @@ static int scpsys_regulator_disable(struct scp_domain *scpd)return regulator_disable (scpd->supply); } +static void scpsys_clk_disable (struct clk *clk[],int max_num) +{ +int i; + +for (i = max_num -1 ; i >=0 ; i--) +clk_disable_unprepare (clk[i]); +} + +static int scpsys_clk_enable (struct clk *clk[],int max_num) +{ +int i, ret =0 ; + +for (i =0 ; i < max_num && clk[i]; i++) { + ret =clk_prepare_enable (clk[i]); +if (ret) { +scpsys_clk_disable (clk, i); +break ; + } + } + +return ret; +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);@@ -215,21 +238,14 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp; -int i; ret =scpsys_regulator_enable (scpd);if (ret <0 )return ret; -for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) { - ret =clk_prepare_enable (scpd->clk[i]); -if (ret) { -for (--i; i >=0 ; i--) -clk_disable_unprepare (scpd->clk[i]); - - goto err_clk; - } - } + ret =scpsys_clk_enable (scpd->clk,MAX_CLKS ); +if (ret) + goto err_clk; val =readl (ctl_addr); val |=PWR_ON_BIT ;@@ -282,10 +298,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)return 0 ; err_pwr_ack: -for (i =MAX_CLKS -1 ; i >=0 ; i--) { -if (scpd->clk[i]) -clk_disable_unprepare (scpd->clk[i]); - } +scpsys_clk_disable (scpd->clk,MAX_CLKS ); err_clk:scpsys_regulator_disable (scpd);@@ -302,7 +315,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp; -int i;if (scpd->data->bus_prot_mask) { ret = mtk_infracfg_set_bus_protection(scp->infracfg,@@ -343,8 +355,7 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)if (ret <0 ) goto out; -for (i =0 ; i <MAX_CLKS && scpd->clk[i]; i++) -clk_disable_unprepare (scpd->clk[i]); +scpsys_clk_disable (scpd->clk,MAX_CLKS ); ret =scpsys_regulator_disable (scpd);if (ret <0 )
PATCH v7 6/13 soc: mediatek: Refactor sram control
In reply to Weiyi LuPut sram enable and disable control in separate functions.
--- drivers/soc/mediatek/mtk-scpsys.c | 79 +++++++++++++++++++++++++-------------- 1 file changed, 51 insertions(+), 28 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +51 -28
@@ -230,12 +230,55 @@ static int scpsys_clk_enable(struct clk *clk[], int max_num)return ret; } +static int scpsys_sram_enable (struct scp_domain *scpd,void __iomem *ctl_addr) +{ +u32 val; +u32 pdn_ack = scpd->data->sram_pdn_ack_bits; +int tmp; + + val =readl (ctl_addr) & ~scpd->data->sram_pdn_bits; +writel (val, ctl_addr); + +/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ +if (MTK_SCPD_CAPS (scpd,MTK_SCPD_FWAIT_SRAM )) { +/* +* Currently, MTK_SCPD_FWAIT_SRAM is necessary only for +* MT7622_POWER_DOMAIN_WB and thus just a trivial setup +* is applied here. +*/ +usleep_range (12000 ,12100 ); + }else { +/* Either wait until SRAM_PDN_ACK all 1 or 0 */ +int ret =readl_poll_timeout (ctl_addr, tmp, + (tmp & pdn_ack) ==0 , +MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); +if (ret <0 ) +return ret; + } + +return 0 ; +} + +static int scpsys_sram_disable (struct scp_domain *scpd,void __iomem *ctl_addr) +{ +u32 val; +u32 pdn_ack = scpd->data->sram_pdn_ack_bits; +int tmp; + + val =readl (ctl_addr) | scpd->data->sram_pdn_bits; +writel (val, ctl_addr); + +/* Either wait until SRAM_PDN_ACK all 1 or 0 */ +return readl_poll_timeout (ctl_addr, tmp, + (tmp & pdn_ack) == pdn_ack, +MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);struct scp *scp = scpd->scp;void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; -u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp;
@@ -247,6 +290,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)if (ret) goto err_clk; +/* subsys power on */ val =readl (ctl_addr); val |=PWR_ON_BIT ;writel (val, ctl_addr);
@@ -268,24 +312,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |=PWR_RST_B_BIT ;writel (val, ctl_addr); - val &= ~scpd->data->sram_pdn_bits; -writel (val, ctl_addr); - -/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ -if (MTK_SCPD_CAPS (scpd,MTK_SCPD_FWAIT_SRAM )) { -/* -* Currently, MTK_SCPD_FWAIT_SRAM is necessary only for -* MT7622_POWER_DOMAIN_WB and thus just a trivial setup is -* applied here. -*/ -usleep_range (12000 ,12100 ); - - }else { - ret =readl_poll_timeout (ctl_addr, tmp, (tmp & pdn_ack) ==0 , -MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); -if (ret <0 ) - goto err_pwr_ack; - } + ret =scpsys_sram_enable (scpd, ctl_addr); +if (ret <0 ) + goto err_pwr_ack;if (scpd->data->bus_prot_mask) { ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
@@ -312,7 +341,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);struct scp *scp = scpd->scp;void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; -u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp;
@@ -324,17 +352,12 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) goto out; } - val =readl (ctl_addr); - val |= scpd->data->sram_pdn_bits; -writel (val, ctl_addr); - -/* wait until SRAM_PDN_ACK all 1 */ - ret =readl_poll_timeout (ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, -MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); + ret =scpsys_sram_disable (scpd, ctl_addr);if (ret <0 ) goto out; - val |=PWR_ISO_BIT ; +/* subsys power off */ + val =readl (ctl_addr) |PWR_ISO_BIT ;writel (val, ctl_addr); val &= ~PWR_RST_B_BIT ;
Signature · 1 line
1.8.1.1.dirty
Matthias Brugger
maintainerRe: [PATCH v7 06/13] soc: mediatek: Refactor sram control
Quoted 4 lines · Weiyi Lu
Put sram enable and disable control in separate functions.
Signed-off-by Weiyi Lu <[email protected]>Reviewed-by Nicolas Boichat <[email protected]>
Applied with the following changes made to your patch:
drivers/soc/mediatek/mtk-scpsys.c +0 -0
@@ -236,7 +236,8 @@ static int scpsys_sram_enable(struct scp_domain *scpd, void
__iomem *ctl_addr)
u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
int tmp;- val = readl(ctl_addr) & ~scpd->data->sram_pdn_bits;
+ val = readl(ctl_addr);
+ val &= ~scpd->data->sram_pdn_bits;
writel(val, ctl_addr);
/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
@@ -265,7 +266,8 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void
__iomem *ctl_addr)
u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
int tmp;- val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
+ val = readl(ctl_addr);
+ vale |= scpd->data->sram_pdn_bits;
writel(val, ctl_addr);
/* Either wait until SRAM_PDN_ACK all 1 or 0 */
@@ -357,7 +359,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
goto out;
/* subsys power off */
- val = readl(ctl_addr) | PWR_ISO_BIT;
+ val = readl(ctl_addr);
+ val |= PWR_ISO_BIT;
writel(val, ctl_addr);
val &= ~PWR_RST_B_BIT;Hope that is OK for you (and I didn't made any mistake). If you see any problem, please let me know.
Thanks,
Matthias
Quoted 131 lines
--- drivers/soc/mediatek/mtk-scpsys.c | 79 +++++++++++++++++++++++++-------------- 1 file changed, 51 insertions(+), 28 deletions(-)drivers/soc/mediatek/mtk-scpsys.c +51
-28@@ -230,12 +230,55 @@ static int scpsys_clk_enable(struct clk *clk[], int max_num)return ret; } +static int scpsys_sram_enable (struct scp_domain *scpd,void __iomem *ctl_addr) +{ +u32 val; +u32 pdn_ack = scpd->data->sram_pdn_ack_bits; +int tmp; + + val =readl (ctl_addr) & ~scpd->data->sram_pdn_bits; +writel (val, ctl_addr); + +/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ +if (MTK_SCPD_CAPS (scpd,MTK_SCPD_FWAIT_SRAM )) { +/* +* Currently, MTK_SCPD_FWAIT_SRAM is necessary only for +* MT7622_POWER_DOMAIN_WB and thus just a trivial setup +* is applied here. +*/ +usleep_range (12000 ,12100 ); + }else { +/* Either wait until SRAM_PDN_ACK all 1 or 0 */ +int ret =readl_poll_timeout (ctl_addr, tmp, + (tmp & pdn_ack) ==0 , +MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); +if (ret <0 ) +return ret; + } + +return 0 ; +} + +static int scpsys_sram_disable (struct scp_domain *scpd,void __iomem *ctl_addr) +{ +u32 val; +u32 pdn_ack = scpd->data->sram_pdn_ack_bits; +int tmp; + + val =readl (ctl_addr) | scpd->data->sram_pdn_bits; +writel (val, ctl_addr); + +/* Either wait until SRAM_PDN_ACK all 1 or 0 */ +return readl_poll_timeout (ctl_addr, tmp, + (tmp & pdn_ack) == pdn_ack, +MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);struct scp *scp = scpd->scp;void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; -u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp;@@ -247,6 +290,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)if (ret) goto err_clk; +/* subsys power on */ val =readl (ctl_addr); val |=PWR_ON_BIT ;writel (val, ctl_addr);@@ -268,24 +312,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |=PWR_RST_B_BIT ;writel (val, ctl_addr); - val &= ~scpd->data->sram_pdn_bits; -writel (val, ctl_addr); - -/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ -if (MTK_SCPD_CAPS (scpd,MTK_SCPD_FWAIT_SRAM )) { -/* -* Currently, MTK_SCPD_FWAIT_SRAM is necessary only for -* MT7622_POWER_DOMAIN_WB and thus just a trivial setup is -* applied here. -*/ -usleep_range (12000 ,12100 ); - - }else { - ret =readl_poll_timeout (ctl_addr, tmp, (tmp & pdn_ack) ==0 , -MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); -if (ret <0 ) - goto err_pwr_ack; - } + ret =scpsys_sram_enable (scpd, ctl_addr); +if (ret <0 ) + goto err_pwr_ack;if (scpd->data->bus_prot_mask) { ret = mtk_infracfg_clear_bus_protection(scp->infracfg,@@ -312,7 +341,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);struct scp *scp = scpd->scp;void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; -u32 pdn_ack = scpd->data->sram_pdn_ack_bits;u32 val;int ret, tmp;@@ -324,17 +352,12 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) goto out; } - val =readl (ctl_addr); - val |= scpd->data->sram_pdn_bits; -writel (val, ctl_addr); - -/* wait until SRAM_PDN_ACK all 1 */ - ret =readl_poll_timeout (ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, -MTK_POLL_DELAY_US ,MTK_POLL_TIMEOUT ); + ret =scpsys_sram_disable (scpd, ctl_addr);if (ret <0 ) goto out; - val |=PWR_ISO_BIT ; +/* subsys power off */ + val =readl (ctl_addr) |PWR_ISO_BIT ;writel (val, ctl_addr); val &= ~PWR_RST_B_BIT ;
PATCH v7 7/13 soc: mediatek: Refactor bus protection control
In reply to Weiyi LuPut bus protection enable and disable control in separate functions.
--- drivers/soc/mediatek/mtk-scpsys.c | 44 ++++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 14 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +30 -14
@@ -274,6 +274,30 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr) MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); } +static int scpsys_bus_protect_enable (struct scp_domain *scpd) +{ +struct scp *scp = scpd->scp; + +if (!scpd->data->bus_prot_mask) +return 0 ; + +return mtk_infracfg_set_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + +static int scpsys_bus_protect_disable (struct scp_domain *scpd) +{ +struct scp *scp = scpd->scp; + +if (!scpd->data->bus_prot_mask) +return 0 ; + +return mtk_infracfg_clear_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -316,13 +340,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)if (ret <0 ) goto err_pwr_ack; -if (scpd->data->bus_prot_mask) { - ret =mtk_infracfg_clear_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); -if (ret) - goto err_pwr_ack; - } + ret =scpsys_bus_protect_disable (scpd); +if (ret <0 ) + goto err_pwr_ack;return 0 ;
@@ -344,13 +364,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)u32 val;int ret, tmp; -if (scpd->data->bus_prot_mask) { - ret =mtk_infracfg_set_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); -if (ret) - goto out; - } + ret =scpsys_bus_protect_enable (scpd); +if (ret <0 ) + goto out; ret =scpsys_sram_disable (scpd, ctl_addr);if (ret <0 )
Signature · 1 line
1.8.1.1.dirty
Re: [PATCH v7 07/13] soc: mediatek: Refactor bus protection control
Quoted 3 lines · Weiyi Lu
Put bus protection enable and disable control in separate functions.
Signed-off-by Weiyi Lu <[email protected]>
Applied to v5.4-next/soc
Thanks!
Quoted 74 lines
--- drivers/soc/mediatek/mtk-scpsys.c | 44 ++++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 14 deletions(-)drivers/soc/mediatek/mtk-scpsys.c +30
-14@@ -274,6 +274,30 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr) MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); } +static int scpsys_bus_protect_enable (struct scp_domain *scpd) +{ +struct scp *scp = scpd->scp; + +if (!scpd->data->bus_prot_mask) +return 0 ; + +return mtk_infracfg_set_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + +static int scpsys_bus_protect_disable (struct scp_domain *scpd) +{ +struct scp *scp = scpd->scp; + +if (!scpd->data->bus_prot_mask) +return 0 ; + +return mtk_infracfg_clear_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} +static int scpsys_power_on (struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);@@ -316,13 +340,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)if (ret <0 ) goto err_pwr_ack; -if (scpd->data->bus_prot_mask) { - ret =mtk_infracfg_clear_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); -if (ret) - goto err_pwr_ack; - } + ret =scpsys_bus_protect_disable (scpd); +if (ret <0 ) + goto err_pwr_ack;return 0 ;@@ -344,13 +364,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)u32 val;int ret, tmp; -if (scpd->data->bus_prot_mask) { - ret =mtk_infracfg_set_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); -if (ret) - goto out; - } + ret =scpsys_bus_protect_enable (scpd); +if (ret <0 ) + goto out; ret =scpsys_sram_disable (scpd, ctl_addr);if (ret <0 )
PATCH v7 8/13 soc: mediatek: Add basic_clk_id to scp_power_data
In reply to Weiyi LuTry to stop extending the clk_id or clk_names if there are more and more new BASIC clocks. To get its own clocks by the basic_clk_id of each power domain.
--- drivers/soc/mediatek/mtk-scpsys.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +21 -8
@@ -117,6 +117,8 @@ enum clk_id {* @sram_pdn_ack_bits: The mask for sram power control acked bits. * @bus_prot_mask: The mask for single step bus protection. * @clk_id: The basic clocks required by this power domain. +* @basic_clk_id: provide the same purpose with field "clk_id" +* by declaring basic clock prefix name rather than clk_id. * @caps: The flag for active wake-up action. */ struct scp_domain_data {
@@ -127,6 +129,7 @@ struct scp_domain_data {u32 sram_pdn_ack_bits;u32 bus_prot_mask;enum clk_id clk_id[MAX_CLKS ]; +const char *basic_clk_id[MAX_CLKS ];u8 caps; };
@@ -490,16 +493,26 @@ static struct scp *init_scp(struct platform_device *pdev, scpd->data = data; -for (j =0 ; j <MAX_CLKS && data->clk_id[j]; j++) { -struct clk *c = clk[data->clk_id[j]]; +if (data->clk_id[0 ]) { +WARN_ON (data->basic_clk_id[0 ]); -if (IS_ERR (c)) { -dev_err (&pdev->dev,"%s: clk unavailable\n" , - data->name); -return ERR_CAST (c); - } +for (j =0 ; j <MAX_CLKS && data->clk_id[j]; j++) { +struct clk *c = clk[data->clk_id[j]]; + +if (IS_ERR (c)) { +dev_err (&pdev->dev, +"%s: clk unavailable\n" , + data->name); +return ERR_CAST (c); + } - scpd->clk[j] = c; + scpd->clk[j] = c; + } + }else if (data->basic_clk_id[0 ]) { +for (j =0 ; j <MAX_CLKS && + data->basic_clk_id[j]; j++) + scpd->clk[j] =devm_clk_get (&pdev->dev, + data->basic_clk_id[j]); } genpd->name = data->name;
Signature · 1 line
1.8.1.1.dirty
PATCH v7 9/13 soc: mediatek: Add multiple step bus protection control
In reply to Weiyi LuBoth MT8183 & MT6765 have more control steps of bus protection than previous project. And there add more bus protection registers reside at infracfg & smi-common. Also add new APIs for multiple step bus protection control with more customized arguments.
--- drivers/soc/mediatek/Makefile | 2 +- drivers/soc/mediatek/mtk-scpsys-ext.c | 99 +++++++++++++++++++++++++++++++++ drivers/soc/mediatek/mtk-scpsys.c | 39 +++++++++---- include/linux/soc/mediatek/scpsys-ext.h | 39 +++++++++++++ 4 files changed, 168 insertions(+), 11 deletions(-) create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c create mode 100644 include/linux/soc/mediatek/scpsys-ext.h
drivers/soc/mediatek/Makefile +1 -1
@@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o -obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o +obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
drivers/soc/mediatek/mtk-scpsys-ext.c new file +99 -0
99 lines not on this page · raw message
drivers/soc/mediatek/mtk-scpsys.c +29 -10
@@ -12,6 +12,7 @@#include <linux/pm_domain.h> #include <linux/regulator/consumer.h> #include <linux/soc/mediatek/infracfg.h> +#include <linux/soc/mediatek/scpsys-ext.h> #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/power/mt2712-power.h>
@@ -120,6 +121,7 @@ enum clk_id {* @basic_clk_id: provide the same purpose with field "clk_id" * by declaring basic clock prefix name rather than clk_id. * @caps: The flag for active wake-up action. +* @bp_table: The mask table for multiple step bus protection. */ struct scp_domain_data {const char *name;
@@ -131,6 +133,7 @@ struct scp_domain_data {enum clk_id clk_id[MAX_CLKS ];const char *basic_clk_id[MAX_CLKS ];u8 caps; +struct bus_prot bp_table[MAX_STEPS ]; };struct scp ;
@@ -154,6 +157,7 @@ struct scp {struct device *dev;void __iomem *base;struct regmap *infracfg; +struct regmap *smi_common;struct scp_ctrl_reg ctrl_reg;bool bus_prot_reg_update; };
@@ -281,24 +285,28 @@ static int scpsys_bus_protect_enable(struct scp_domain *scpd) {struct scp *scp = scpd->scp; -if (!scpd->data->bus_prot_mask) -return 0 ; +if (scpd->data->bus_prot_mask) { +return mtk_infracfg_set_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); + } -return mtk_infracfg_set_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); +return mtk_scpsys_ext_set_bus_protection (scpd->data->bp_table, + scp->infracfg, scp->smi_common); }static int scpsys_bus_protect_disable (struct scp_domain *scpd) {struct scp *scp = scpd->scp; -if (!scpd->data->bus_prot_mask) -return 0 ; +if (scpd->data->bus_prot_mask) { +return mtk_infracfg_clear_bus_protection (scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); + } -return mtk_infracfg_clear_bus_protection (scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); +return mtk_scpsys_ext_clear_bus_protection (scpd->data->bp_table, + scp->infracfg, scp->smi_common); }static int scpsys_power_on (struct generic_pm_domain *genpd)
@@ -466,6 +474,17 @@ static struct scp *init_scp(struct platform_device *pdev,return ERR_CAST (scp->infracfg); } + scp->smi_common =syscon_regmap_lookup_by_phandle (pdev->dev.of_node, +"smi_comm" ); + +if (scp->smi_common ==ERR_PTR (-ENODEV )) { + scp->smi_common =NULL ; + }else if (IS_ERR (scp->smi_common)) { +dev_err (&pdev->dev,"Cannot find smi_common controller: %ld\n" , +PTR_ERR (scp->smi_common)); +return ERR_CAST (scp->smi_common); + } +for (i =0 ; i < num; i++) {struct scp_domain *scpd = &scp->domains[i];const struct scp_domain_data *data = &scp_domain_data[i];
include/linux/soc/mediatek/scpsys-ext.h new file +39 -0
@@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H +#define __SOC_MEDIATEK_SCPSYS_EXT_H + +#define MAX_STEPS 4 + +#define BUS_PROT (_type, _set_ofs, _clr_ofs, \ + _en_ofs, _sta_ofs, _mask, _clr_ack_mask) { \ + .type = _type, \ + .set_ofs = _set_ofs, \ + .clr_ofs = _clr_ofs, \ + .en_ofs = _en_ofs, \ + .sta_ofs = _sta_ofs, \ + .mask = _mask, \ + .clr_ack_mask = _clr_ack_mask, \ + } + +enum regmap_type { +INVALID_TYPE =0 , +IFR_TYPE , +SMI_TYPE , +}; + +struct bus_prot { +enum regmap_type type; +u32 set_ofs; +u32 clr_ofs; +u32 en_ofs; +u32 sta_ofs; +u32 mask; +u32 clr_ack_mask; +}; + +int mtk_scpsys_ext_set_bus_protection (const struct bus_prot *bp_table, +struct regmap *infracfg,struct regmap *smi_common); +int mtk_scpsys_ext_clear_bus_protection (const struct bus_prot *bp_table, +struct regmap *infracfg,struct regmap *smi_common); + +#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */
Signature · 1 line
1.8.1.1.dirty
PATCH v7 10/13 soc: mediatek: Add subsys clock control for bus protection
In reply to Weiyi LuAdd subsys CG control flow before/after the bus protect control due to bus protection need SMI bus relative CGs enabled to feedback its ack.
--- drivers/soc/mediatek/mtk-scpsys.c | 72 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 2 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +70 -2
@@ -108,6 +108,7 @@ enum clk_id { };#define MAX_CLKS 3 +#define MAX_SUBSYS_CLKS 10/** * struct scp_domain_data - scp domain data for power on/off flow
@@ -120,6 +121,8 @@ enum clk_id {* @clk_id: The basic clocks required by this power domain. * @basic_clk_id: provide the same purpose with field "clk_id" * by declaring basic clock prefix name rather than clk_id. +* @subsys_clk_prefix: The prefix name of the clocks need to be enabled +* before releasing bus protection. * @caps: The flag for active wake-up action. * @bp_table: The mask table for multiple step bus protection. */
@@ -132,6 +135,7 @@ struct scp_domain_data {u32 bus_prot_mask;enum clk_id clk_id[MAX_CLKS ];const char *basic_clk_id[MAX_CLKS ]; +const char *subsys_clk_prefix;u8 caps;struct bus_prot bp_table[MAX_STEPS ]; };
@@ -142,6 +146,7 @@ struct scp_domain {struct generic_pm_domain genpd;struct scp *scp;struct clk *clk[MAX_CLKS ]; +struct clk *subsys_clk[MAX_SUBSYS_CLKS ];const struct scp_domain_data *data;struct regulator *supply; };
@@ -347,16 +352,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |=PWR_RST_B_BIT ;writel (val, ctl_addr); - ret =scpsys_sram_enable (scpd, ctl_addr); + ret =scpsys_clk_enable (scpd->subsys_clk,MAX_SUBSYS_CLKS );if (ret <0 ) goto err_pwr_ack; + ret =scpsys_sram_enable (scpd, ctl_addr); +if (ret <0 ) + goto err_sram; + ret =scpsys_bus_protect_disable (scpd);if (ret <0 ) - goto err_pwr_ack; + goto err_sram;return 0 ; +err_sram: +scpsys_clk_disable (scpd->subsys_clk,MAX_SUBSYS_CLKS ); err_pwr_ack:scpsys_clk_disable (scpd->clk,MAX_CLKS ); err_clk:
@@ -383,6 +394,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)if (ret <0 ) goto out; +scpsys_clk_disable (scpd->subsys_clk,MAX_SUBSYS_CLKS ); +/* subsys power off */ val =readl (ctl_addr) |PWR_ISO_BIT ;writel (val, ctl_addr);
@@ -419,6 +432,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)return ret; } +static int init_subsys_clks (struct platform_device *pdev, +const char *prefix,struct clk **clk) +{ +struct device_node *node = pdev->dev.of_node; +u32 prefix_len, sub_clk_cnt =0 ; +struct property *prop; +const char *clk_name; + +if (!node) { +dev_err (&pdev->dev,"Cannot find scpsys node: %ld\n" , +PTR_ERR (node)); +return PTR_ERR (node); + } + + prefix_len =strlen (prefix); + +of_property_for_each_string (node,"clock-names" , prop, clk_name) { +if (!strncmp (clk_name, prefix, prefix_len) && + (clk_name[prefix_len] =='-' )) { +if (sub_clk_cnt >=MAX_SUBSYS_CLKS ) { +dev_err (&pdev->dev, +"subsys clk out of range %d\n" , + sub_clk_cnt); +return -ENOMEM ; + } + + clk[sub_clk_cnt] =devm_clk_get (&pdev->dev, + clk_name); + +if (IS_ERR (clk)) { +dev_err (&pdev->dev, +"Subsys clk read fail %ld\n" , +PTR_ERR (clk)); +return PTR_ERR (clk); + } + sub_clk_cnt++; + } + } + +return sub_clk_cnt; +} +static void init_clks (struct platform_device *pdev,struct clk **clk) {int i;
@@ -506,6 +561,7 @@ static struct scp *init_scp(struct platform_device *pdev,struct scp_domain *scpd = &scp->domains[i];struct generic_pm_domain *genpd = &scpd->genpd;const struct scp_domain_data *data = &scp_domain_data[i]; +int clk_cnt; pd_data->domains[i] = genpd; scpd->scp = scp;
@@ -534,6 +590,18 @@ static struct scp *init_scp(struct platform_device *pdev, data->basic_clk_id[j]); } +if (data->subsys_clk_prefix) { + clk_cnt =init_subsys_clks (pdev, + data->subsys_clk_prefix, + scpd->subsys_clk); +if (clk_cnt <0 ) { +dev_err (&pdev->dev, +"%s: subsys clk unavailable\n" , + data->name); +return ERR_PTR (clk_cnt); + } + } + genpd->name = data->name; genpd->power_off = scpsys_power_off; genpd->power_on = scpsys_power_on;
Signature · 1 line
1.8.1.1.dirty
PATCH v7 11/13 soc: mediatek: Add extra sram control
In reply to Weiyi LuFor some power domains like vpu_core on MT8183 whose sram need to do clock and internal isolation while power on/off sram. We add a flag "sram_iso_ctrl" in scp_domain_data to judge if we need to do the extra sram isolation control or not.
--- drivers/soc/mediatek/mtk-scpsys.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/soc/mediatek/mtk-scpsys.c +22 -0
@@ -57,6 +57,8 @@#define PWR_ON_BIT BIT(2)#define PWR_ON_2ND_BIT BIT(3)#define PWR_CLK_DIS_BIT BIT(4) +#define PWR_SRAM_CLKISO_BIT BIT(5) +#define PWR_SRAM_ISOINT_B_BIT BIT(6)#define PWR_STATUS_CONN BIT(1)#define PWR_STATUS_DISP BIT(3)
@@ -115,6 +117,8 @@ enum clk_id {* @name: The domain name. * @sta_mask: The mask for power on/off status bit. * @ctl_offs: The offset for main power control register. +* @sram_iso_ctrl: The flag to judge if the power domain need to do +* the extra sram isolation control. * @sram_pdn_bits: The mask for sram power control bits. * @sram_pdn_ack_bits: The mask for sram power control acked bits. * @bus_prot_mask: The mask for single step bus protection.
@@ -130,6 +134,7 @@ struct scp_domain_data {const char *name;u32 sta_mask;int ctl_offs; +bool sram_iso_ctrl;u32 sram_pdn_bits;u32 sram_pdn_ack_bits;u32 bus_prot_mask;
@@ -268,6 +273,14 @@ static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)return ret; } +if (scpd->data->sram_iso_ctrl) { + val =readl (ctl_addr) |PWR_SRAM_ISOINT_B_BIT ; +writel (val, ctl_addr); +udelay (1 ); + val &= ~PWR_SRAM_CLKISO_BIT ; +writel (val, ctl_addr); + } +return 0 ; }
@@ -277,6 +290,15 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)u32 pdn_ack = scpd->data->sram_pdn_ack_bits;int tmp; +if (scpd->data->sram_iso_ctrl) { + val =readl (ctl_addr); + val |=PWR_SRAM_CLKISO_BIT ; +writel (val, ctl_addr); + val &= ~PWR_SRAM_ISOINT_B_BIT ; +writel (val, ctl_addr); +udelay (1 ); + } + val =readl (ctl_addr) | scpd->data->sram_pdn_bits;writel (val, ctl_addr);
Signature · 1 line
1.8.1.1.dirty
PATCH v7 12/13 soc: mediatek: Add MT8183 scpsys support
In reply to Weiyi LuAdd scpsys driver for MT8183
--- drivers/soc/mediatek/mtk-scpsys.c | 226 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+)
drivers/soc/mediatek/mtk-scpsys.c +226 -0
@@ -20,6 +20,7 @@#include <dt-bindings/power/mt7622-power.h> #include <dt-bindings/power/mt7623a-power.h> #include <dt-bindings/power/mt8173-power.h> +#include <dt-bindings/power/mt8183-power.h> #define MTK_POLL_DELAY_US 10#define MTK_POLL_TIMEOUT USEC_PER_SEC
@@ -1129,6 +1130,217 @@ static void mtk_register_power_domains(struct platform_device *pdev, {MT8173_POWER_DOMAIN_MFG_2D, MT8173_POWER_DOMAIN_MFG}, }; +/* +* MT8183 power domain support +*/ + +static const struct scp_domain_data scp_domain_data_mt8183[] = { + [MT8183_POWER_DOMAIN_AUDIO ] = { + .name ="audio" , + .sta_mask =PWR_STATUS_AUDIO , + .ctl_offs =0x0314 , + .sram_pdn_bits =GENMASK (11 ,8 ), + .sram_pdn_ack_bits =GENMASK (15 ,12 ), + .basic_clk_id = {"audio" ,"audio1" ,"audio2" }, + }, + [MT8183_POWER_DOMAIN_CONN ] = { + .name ="conn" , + .sta_mask =PWR_STATUS_CONN , + .ctl_offs =0x032c , + .sram_pdn_bits =0 , + .sram_pdn_ack_bits =0 , + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2a0 ,0x2a4 ,0 ,0x228 , +BIT (13 ) |BIT (14 ),BIT (13 ) |BIT (14 )), + }, + }, + [MT8183_POWER_DOMAIN_MFG_ASYNC ] = { + .name ="mfg_async" , + .sta_mask =PWR_STATUS_MFG_ASYNC , + .ctl_offs =0x0334 , + .sram_pdn_bits =0 , + .sram_pdn_ack_bits =0 , + .basic_clk_id = {"mfg" }, + }, + [MT8183_POWER_DOMAIN_MFG ] = { + .name ="mfg" , + .sta_mask =PWR_STATUS_MFG , + .ctl_offs =0x0338 , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + }, + [MT8183_POWER_DOMAIN_MFG_CORE0 ] = { + .name ="mfg_core0" , + .sta_mask =BIT (7 ), + .ctl_offs =0x034c , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + }, + [MT8183_POWER_DOMAIN_MFG_CORE1 ] = { + .name ="mfg_core1" , + .sta_mask =BIT (20 ), + .ctl_offs =0x0310 , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + }, + [MT8183_POWER_DOMAIN_MFG_2D ] = { + .name ="mfg_2d" , + .sta_mask =PWR_STATUS_MFG_2D , + .ctl_offs =0x0348 , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2a8 ,0x2ac ,0 ,0x258 , +BIT (19 ) |BIT (20 ) |BIT (21 ), +BIT (19 ) |BIT (20 ) |BIT (21 )), +BUS_PROT (IFR_TYPE ,0x2a0 ,0x2a4 ,0 ,0x228 , +BIT (21 ) |BIT (22 ),BIT (21 ) |BIT (22 )), + }, + }, + [MT8183_POWER_DOMAIN_DISP ] = { + .name ="disp" , + .sta_mask =PWR_STATUS_DISP , + .ctl_offs =0x030c , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + .basic_clk_id = {"mm" }, + .subsys_clk_prefix ="mm" , + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2a8 ,0x2ac ,0 ,0x258 , +BIT (16 ) |BIT (17 ),BIT (16 ) |BIT (17 )), +BUS_PROT (IFR_TYPE ,0x2a0 ,0x2a4 ,0 ,0x228 , +BIT (10 ) |BIT (11 ),BIT (10 ) |BIT (11 )), +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +GENMASK (7 ,0 ),GENMASK (7 ,0 )), + }, + }, + [MT8183_POWER_DOMAIN_CAM ] = { + .name ="cam" , + .sta_mask =BIT (25 ), + .ctl_offs =0x0344 , + .sram_pdn_bits =GENMASK (9 ,8 ), + .sram_pdn_ack_bits =GENMASK (13 ,12 ), + .basic_clk_id = {"cam" }, + .subsys_clk_prefix ="cam" , + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +BIT (4 ) |BIT (5 ) |BIT (9 ) |BIT (13 ), +BIT (4 ) |BIT (5 ) |BIT (9 ) |BIT (13 )), +BUS_PROT (IFR_TYPE ,0x2a0 ,0x2a4 ,0 ,0x228 , +BIT (28 ),BIT (28 )), +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +BIT (11 ),0 ), +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +BIT (3 ) |BIT (4 ),BIT (3 ) |BIT (4 )), + }, + }, + [MT8183_POWER_DOMAIN_ISP ] = { + .name ="isp" , + .sta_mask =PWR_STATUS_ISP , + .ctl_offs =0x0308 , + .sram_pdn_bits =GENMASK (9 ,8 ), + .sram_pdn_ack_bits =GENMASK (13 ,12 ), + .basic_clk_id = {"isp" }, + .subsys_clk_prefix ="isp" , + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +BIT (3 ) |BIT (8 ),BIT (3 ) |BIT (8 )), +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +BIT (10 ),0 ), +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +BIT (2 ),BIT (2 )), + }, + }, + [MT8183_POWER_DOMAIN_VDEC ] = { + .name ="vdec" , + .sta_mask =BIT (31 ), + .ctl_offs =0x0300 , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + .bp_table = { +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +BIT (7 ),BIT (7 )), + }, + }, + [MT8183_POWER_DOMAIN_VENC ] = { + .name ="venc" , + .sta_mask =PWR_STATUS_VENC , + .ctl_offs =0x0304 , + .sram_pdn_bits =GENMASK (11 ,8 ), + .sram_pdn_ack_bits =GENMASK (15 ,12 ), + .bp_table = { +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +BIT (1 ),BIT (1 )), + }, + }, + [MT8183_POWER_DOMAIN_VPU_TOP ] = { + .name ="vpu_top" , + .sta_mask =BIT (26 ), + .ctl_offs =0x0324 , + .sram_pdn_bits =GENMASK (8 ,8 ), + .sram_pdn_ack_bits =GENMASK (12 ,12 ), + .basic_clk_id = {"vpu" ,"vpu1" }, + .subsys_clk_prefix ="vpu" , + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +GENMASK (9 ,6 ) |BIT (12 ), +GENMASK (9 ,6 ) |BIT (12 )), +BUS_PROT (IFR_TYPE ,0x2a0 ,0x2a4 ,0 ,0x228 , +BIT (27 ),BIT (27 )), +BUS_PROT (IFR_TYPE ,0x2d4 ,0x2d8 ,0 ,0x2ec , +BIT (10 ) |BIT (11 ),BIT (10 ) |BIT (11 )), +BUS_PROT (SMI_TYPE ,0x3c4 ,0x3c8 ,0 ,0x3c0 , +BIT (5 ) |BIT (6 ),BIT (5 ) |BIT (6 )), + }, + }, + [MT8183_POWER_DOMAIN_VPU_CORE0 ] = { + .name ="vpu_core0" , + .sta_mask =BIT (27 ), + .ctl_offs =0x33c , + .sram_iso_ctrl = true, + .sram_pdn_bits =GENMASK (11 ,8 ), + .sram_pdn_ack_bits =GENMASK (13 ,12 ), + .basic_clk_id = {"vpu2" }, + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2c4 ,0x2c8 ,0 ,0x2e4 , +BIT (6 ),BIT (6 )), +BUS_PROT (IFR_TYPE ,0x2c4 ,0x2c8 ,0 ,0x2e4 , +BIT (0 ) |BIT (2 ) |BIT (4 ), +BIT (0 ) |BIT (2 ) |BIT (4 )), + }, + }, + [MT8183_POWER_DOMAIN_VPU_CORE1 ] = { + .name ="vpu_core1" , + .sta_mask =BIT (28 ), + .ctl_offs =0x0340 , + .sram_iso_ctrl = true, + .sram_pdn_bits =GENMASK (11 ,8 ), + .sram_pdn_ack_bits =GENMASK (13 ,12 ), + .basic_clk_id = {"vpu3" }, + .bp_table = { +BUS_PROT (IFR_TYPE ,0x2c4 ,0x2c8 ,0 ,0x2e4 , +BIT (7 ),BIT (7 )), +BUS_PROT (IFR_TYPE ,0x2c4 ,0x2c8 ,0 ,0x2e4 , +BIT (1 ) |BIT (3 ) |BIT (5 ), +BIT (1 ) |BIT (3 ) |BIT (5 )), + }, + }, +}; + +static const struct scp_subdomain scp_subdomain_mt8183[] = { + {MT8183_POWER_DOMAIN_MFG_ASYNC ,MT8183_POWER_DOMAIN_MFG }, + {MT8183_POWER_DOMAIN_MFG ,MT8183_POWER_DOMAIN_MFG_2D }, + {MT8183_POWER_DOMAIN_MFG ,MT8183_POWER_DOMAIN_MFG_CORE0 }, + {MT8183_POWER_DOMAIN_MFG ,MT8183_POWER_DOMAIN_MFG_CORE1 }, + {MT8183_POWER_DOMAIN_DISP ,MT8183_POWER_DOMAIN_CAM }, + {MT8183_POWER_DOMAIN_DISP ,MT8183_POWER_DOMAIN_ISP }, + {MT8183_POWER_DOMAIN_DISP ,MT8183_POWER_DOMAIN_VDEC }, + {MT8183_POWER_DOMAIN_DISP ,MT8183_POWER_DOMAIN_VENC }, + {MT8183_POWER_DOMAIN_DISP ,MT8183_POWER_DOMAIN_VPU_TOP }, + {MT8183_POWER_DOMAIN_VPU_TOP ,MT8183_POWER_DOMAIN_VPU_CORE0 }, + {MT8183_POWER_DOMAIN_VPU_TOP ,MT8183_POWER_DOMAIN_VPU_CORE1 }, +}; +static const struct scp_soc_data mt2701_data = { .domains = scp_domain_data_mt2701, .num_domains = ARRAY_SIZE(scp_domain_data_mt2701),
@@ -1195,6 +1407,17 @@ static void mtk_register_power_domains(struct platform_device *pdev, .bus_prot_reg_update = true, }; +static const struct scp_soc_data mt8183_data = { + .domains = scp_domain_data_mt8183, + .num_domains =ARRAY_SIZE (scp_domain_data_mt8183), + .subdomains = scp_subdomain_mt8183, + .num_subdomains =ARRAY_SIZE (scp_subdomain_mt8183), + .regs = { + .pwr_sta_offs =0x0180 , + .pwr_sta2nd_offs =0x0184 + } +}; +/* * scpsys driver init */
@@ -1219,6 +1442,9 @@ static void mtk_register_power_domains(struct platform_device *pdev, .compatible = "mediatek,mt8173-scpsys", .data = &mt8173_data, }, { + .compatible = "mediatek,mt8183-scpsys", + .data = &mt8183_data, + }, {/* sentinel */ } };
Signature · 1 line
1.8.1.1.dirty
PATCH v7 13/13 arm64: dts: Add power controller device node of MT8183
In reply to Weiyi LuAdd power controller node and smi-common node for MT8183 In scpsys node, it contains clocks and regmapping of infracfg and smi-common for bus protection.
--- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)
arch/arm64/boot/dts/mediatek/mt8183.dtsi +62 -0
@@ -8,6 +8,7 @@ #include <dt-bindings/clock/mt8183-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/mt8183-power.h> #include "mt8183-pinfunc.h" / {
@@ -238,6 +239,62 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8183-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_MFG>, + <&topckgen CLK_TOP_MUX_MM>, + <&topckgen CLK_TOP_MUX_CAM>, + <&topckgen CLK_TOP_MUX_IMG>, + <&topckgen CLK_TOP_MUX_IPU_IF>, + <&topckgen CLK_TOP_MUX_DSP>, + <&topckgen CLK_TOP_MUX_DSP1>, + <&topckgen CLK_TOP_MUX_DSP2>, + <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB1>, + <&mmsys CLK_MM_GALS_COMM0>, + <&mmsys CLK_MM_GALS_COMM1>, + <&mmsys CLK_MM_GALS_CCU2MM>, + <&mmsys CLK_MM_GALS_IPU12MM>, + <&mmsys CLK_MM_GALS_IMG2MM>, + <&mmsys CLK_MM_GALS_CAM2MM>, + <&mmsys CLK_MM_GALS_IPU2MM>, + <&imgsys CLK_IMG_LARB5>, + <&imgsys CLK_IMG_LARB2>, + <&camsys CLK_CAM_LARB6>, + <&camsys CLK_CAM_LARB3>, + <&camsys CLK_CAM_SENINF>, + <&camsys CLK_CAM_CAMSV0>, + <&camsys CLK_CAM_CAMSV1>, + <&camsys CLK_CAM_CAMSV2>, + <&camsys CLK_CAM_CCU>, + <&ipu_conn CLK_IPU_CONN_IPU>, + <&ipu_conn CLK_IPU_CONN_AHB>, + <&ipu_conn CLK_IPU_CONN_AXI>, + <&ipu_conn CLK_IPU_CONN_ISP>, + <&ipu_conn CLK_IPU_CONN_CAM_ADL>, + <&ipu_conn CLK_IPU_CONN_IMG_ADL>; + clock-names = "audio", "audio1", "audio2", + "mfg", "mm", "cam", + "isp", "vpu", "vpu1", + "vpu2", "vpu3", "mm-0", + "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", + "mm-7", "mm-8", "mm-9", + "isp-0", "isp-1", "cam-0", + "cam-1", "cam-2", "cam-3", + "cam-4", "cam-5", "cam-6", + "vpu-0", "vpu-1", "vpu-2", + "vpu-3", "vpu-4", "vpu-5"; + infracfg = <&infracfg>; + smi_comm = <&smi_common>; + }; + apmixedsys: syscon@1000c000 { compatible = "mediatek,mt8183-apmixedsys", "syscon"; reg = <0 0x1000c000 0 0x1000>;
@@ -396,6 +453,11 @@ #clock-cells = <1>; }; + smi_common: smi@14019000 { + compatible = "mediatek,mt8183-smi-common", "syscon"; + reg = <0 0x14019000 0 0x1000>; + }; + imgsys: syscon@15020000 { compatible = "mediatek,mt8183-imgsys", "syscon"; reg = <0 0x15020000 0 0x1000>;
Signature · 1 line
1.8.1.1.dirty
Re: [PATCH v7 13/13] arm64: dts: Add power controller device node of MT8183
Hi, Weiyi:
Quoted 40 lines · Weiyi Lu
Add power controller node and smi-common node for MT8183 In scpsys node, it contains clocks and regmapping of infracfg and smi-common for bus protection.
Signed-off-by Weiyi Lu <[email protected]>--- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)arch/arm64/boot/dts/mediatek/mt8183.dtsi +16
-0@@ -8,6 +8,7 @@ #include <dt-bindings/clock/mt8183-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/mt8183-power.h> #include "mt8183-pinfunc.h" / {@@ -238,6 +239,62 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8183-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_MFG>, + <&topckgen CLK_TOP_MUX_MM>, + <&topckgen CLK_TOP_MUX_CAM>, + <&topckgen CLK_TOP_MUX_IMG>, + <&topckgen CLK_TOP_MUX_IPU_IF>, + <&topckgen CLK_TOP_MUX_DSP>, + <&topckgen CLK_TOP_MUX_DSP1>, + <&topckgen CLK_TOP_MUX_DSP2>,
arch/arm64/boot/dts/mediatek/mt8183.dtsi line 266
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8183.dtsi +10
-0+ <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB1>, + <&mmsys CLK_MM_GALS_COMM0>, + <&mmsys CLK_MM_GALS_COMM1>, + <&mmsys CLK_MM_GALS_CCU2MM>, + <&mmsys CLK_MM_GALS_IPU12MM>, + <&mmsys CLK_MM_GALS_IMG2MM>, + <&mmsys CLK_MM_GALS_CAM2MM>, + <&mmsys CLK_MM_GALS_IPU2MM>,
Just mention the discussion in [1], we need to confirm this is hardware limitation or not.
[1] https://patchwork.kernel.org/patch/11005731/
Regards,
CK
Quoted 46 lines
arch/arm64/boot/dts/mediatek/mt8183.dtsi +36
-0+ <&imgsys CLK_IMG_LARB5>, + <&imgsys CLK_IMG_LARB2>, + <&camsys CLK_CAM_LARB6>, + <&camsys CLK_CAM_LARB3>, + <&camsys CLK_CAM_SENINF>, + <&camsys CLK_CAM_CAMSV0>, + <&camsys CLK_CAM_CAMSV1>, + <&camsys CLK_CAM_CAMSV2>, + <&camsys CLK_CAM_CCU>, + <&ipu_conn CLK_IPU_CONN_IPU>, + <&ipu_conn CLK_IPU_CONN_AHB>, + <&ipu_conn CLK_IPU_CONN_AXI>, + <&ipu_conn CLK_IPU_CONN_ISP>, + <&ipu_conn CLK_IPU_CONN_CAM_ADL>, + <&ipu_conn CLK_IPU_CONN_IMG_ADL>; + clock-names = "audio", "audio1", "audio2", + "mfg", "mm", "cam", + "isp", "vpu", "vpu1", + "vpu2", "vpu3", "mm-0", + "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", + "mm-7", "mm-8", "mm-9", + "isp-0", "isp-1", "cam-0", + "cam-1", "cam-2", "cam-3", + "cam-4", "cam-5", "cam-6", + "vpu-0", "vpu-1", "vpu-2", + "vpu-3", "vpu-4", "vpu-5"; + infracfg = <&infracfg>; + smi_comm = <&smi_common>; + }; + apmixedsys: syscon@1000c000 { compatible = "mediatek,mt8183-apmixedsys", "syscon"; reg = <0 0x1000c000 0 0x1000>;@@ -396,6 +453,11 @@ #clock-cells = <1>; }; + smi_common: smi@14019000 { + compatible = "mediatek,mt8183-smi-common", "syscon"; + reg = <0 0x14019000 0 0x1000>; + }; + imgsys: syscon@15020000 { compatible = "mediatek,mt8183-imgsys", "syscon"; reg = <0 0x15020000 0 0x1000>;