ASoC: rt5645: set sel_i2s_pre_div1 to 2
Subsystems (3)
PATCH 1/2 ASoC: rt5645: set sel_i2s_pre_div1 to 2
The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function.
However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681
--- sound/soc/codecs/rt5645.c | 3 +++ 1 file changed, 3 insertions(+)
sound/soc/codecs/rt5645.c +3 -0
@@ -3833,6 +3833,9 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, } } +regmap_update_bits (rt5645->regmap,RT5645_ADDA_CLK1 , +RT5645_I2S_PD1_MASK ,RT5645_I2S_PD1_2 ); +if (rt5645->pdata.jd_invert) {regmap_update_bits (rt5645->regmap,RT5645_IRQ_CTRL2 ,RT5645_JD_1_1_MASK ,RT5645_JD_1_1_INV );
Signature · 1 line
1.8.1.1.439.g50a6b54
PATCH 2/2 ASoC: rt5645: set high voltage for capless power
The default capless power mode is low voltage mode. We should set it to high voltage mode to get fair headphone performance.
--- sound/soc/codecs/rt5645.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt5645.c +1 -1
@@ -3109,7 +3109,7 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)unsigned int val;if (jack_insert) { -regmap_write (rt5645->regmap,RT5645_CHARGE_PUMP ,0x0006 ); +regmap_write (rt5645->regmap,RT5645_CHARGE_PUMP ,0x0e06 );/* for jack type detect */ snd_soc_dapm_force_enable_pin (dapm,"LDO2" );
Signature · 1 line
1.8.1.1.439.g50a6b54
Mark Brown
maintainerApplied "ASoC: rt5645: set high voltage for capless power" to the asoc tree
The patch
ASoC: rt5645: set high voltage for capless power
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
da369d0ab58cb21371f84a144084a16df7800783Mon Sep 17 00:00:00 2001
From: Bard Liao <[email protected]>
Date: Tue, 27 Dec 2016 12:05:06 +0800
Subject: [PATCH] ASoC: rt5645: set high voltage for capless power
The default capless power mode is low voltage mode. We should set it to high voltage mode to get fair headphone performance.
--- sound/soc/codecs/rt5645.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt5645.c +1 -1
@@ -3109,7 +3109,7 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)unsigned int val;if (jack_insert) { -regmap_write (rt5645->regmap,RT5645_CHARGE_PUMP ,0x0006 ); +regmap_write (rt5645->regmap,RT5645_CHARGE_PUMP ,0x0e06 );/* for jack type detect */ snd_soc_dapm_force_enable_pin (dapm,"LDO2" );
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "ASoC: rt5645: set sel_i2s_pre_div1 to 2" to the asoc tree
In reply to Bard LiaoThe patch
ASoC: rt5645: set sel_i2s_pre_div1 to 2
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
02c5c03283c52157d336abf5e44ffcda10579fbfMon Sep 17 00:00:00 2001
From: Bard Liao <[email protected]>
Date: Tue, 27 Dec 2016 12:05:05 +0800
Subject: [PATCH] ASoC: rt5645: set sel_i2s_pre_div1 to 2
The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function.
However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681
--- sound/soc/codecs/rt5645.c | 3 +++ 1 file changed, 3 insertions(+)
sound/soc/codecs/rt5645.c +3 -0
@@ -3833,6 +3833,9 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, } } +regmap_update_bits (rt5645->regmap,RT5645_ADDA_CLK1 , +RT5645_I2S_PD1_MASK ,RT5645_I2S_PD1_2 ); +if (rt5645->pdata.jd_invert) {regmap_update_bits (rt5645->regmap,RT5645_IRQ_CTRL2 ,RT5645_JD_1_1_MASK ,RT5645_JD_1_1_INV );
Signature · 1 line
2.11.0