arm: socfpga: arria10: add additional i2c nodes for Arria10

index a7056d4..902c321 100644
@@ -29,6 +29,9 @@
 #define SOCFPGA_MPUL2_ADDRESS			0xfffff000
 #define SOCFPGA_I2C0_ADDRESS			0xffc02200
 #define SOCFPGA_I2C1_ADDRESS			0xffc02300
+#define SOCFPGA_I2C2_ADDRESS			0xffc02400
+#define SOCFPGA_I2C3_ADDRESS			0xffc02500
+#define SOCFPGA_I2C4_ADDRESS			0xffc02600
 
 #define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
 #define SOCFPGA_UART0_ADDRESS			0xffc02000

new file mode 100644
index 0000000..0403531
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef	_SOCFPGA_SDRAM_A10_H_
+#define	_SOCFPGA_SDRAM_A10_H_
+
+#ifndef __ASSEMBLY__
+
+struct socfpga_ecc_hmc {
+	u32 ip_rev_id;
+	u32 _pad_0x4_0x7;
+	u32 ddrioctrl;
+	u32 ddrcalstat;
+	u32 mpr_0beat1;
+	u32 mpr_1beat1;
+	u32 mpr_2beat1;
+	u32 mpr_3beat1;
+	u32 mpr_4beat1;
+	u32 mpr_5beat1;
+	u32 mpr_6beat1;
+	u32 mpr_7beat1;
+	u32 mpr_8beat1;
+	u32 mpr_0beat2;
+	u32 mpr_1beat2;
+	u32 mpr_2beat2;
+	u32 mpr_3beat2;
+	u32 mpr_4beat2;
+	u32 mpr_5beat2;
+	u32 mpr_6beat2;
+	u32 mpr_7beat2;
+	u32 mpr_8beat2;
+	u32 _pad_0x58_0x5f[2];
+	u32 auto_precharge;
+	u32 _pad_0x64_0xff[39];
+	u32 eccctrl;
+	u32 eccctrl2;
+	u32 _pad_0x108_0x10f[2];
+	u32 errinten;
+	u32 errintens;
+	u32 errintenr;
+	u32 intmode;
+	u32 intstat;
+	u32 diaginttest;
+	u32 modstat;
+	u32 derraddra;
+	u32 serraddra;
+	u32 _pad_0x134_0x137;
+	u32 autowb_corraddr;
+	u32 serrcntreg;
+	u32 autowb_drop_cntreg;
+	u32 _pad_0x144_0x147;
+	u32 ecc_reg2wreccdatabus;
+	u32 ecc_rdeccdata2regbus;
+	u32 ecc_reg2rdeccdatabus;
+	u32 _pad_0x154_0x15f[3];
+	u32 ecc_diagon;
+	u32 ecc_decstat;
+	u32 _pad_0x168_0x16f[2];
+	u32 ecc_errgenaddr_0;
+	u32 ecc_errgenaddr_1;
+	u32 ecc_errgenaddr_2;
+	u32 ecc_errgenaddr_3;
+};
+
+struct socfpga_noc_ddr_scheduler {
+	u32 ddr_t_main_scheduler_id_coreid;
+	u32 ddr_t_main_scheduler_id_revisionid;
+	u32 ddr_t_main_scheduler_ddrconf;
+	u32 ddr_t_main_scheduler_ddrtiming;
+	u32 ddr_t_main_scheduler_ddrmode;
+	u32 ddr_t_main_scheduler_readlatency;
+	u32 _pad_0x20_0x34[8];
+	u32 ddr_t_main_scheduler_activate;
+	u32 ddr_t_main_scheduler_devtodev;
+};
+
+/*
+ * OCRAM firewall
+ */
+struct socfpga_noc_fw_ocram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 region0;
+	u32 region1;
+	u32 region2;
+	u32 region3;
+	u32 region4;
+	u32 region5;
+};
+
+/* for master such as MPU and FPGA */
+struct socfpga_noc_fw_ddr_mpu_fpga2sdram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 _pad_0xc_0xf;
+	u32 mpuregion0addr;
+	u32 mpuregion1addr;
+	u32 mpuregion2addr;
+	u32 mpuregion3addr;
+	u32 fpga2sdram0region0addr;
+	u32 fpga2sdram0region1addr;
+	u32 fpga2sdram0region2addr;
+	u32 fpga2sdram0region3addr;
+	u32 fpga2sdram1region0addr;
+	u32 fpga2sdram1region1addr;
+	u32 fpga2sdram1region2addr;
+	u32 fpga2sdram1region3addr;
+	u32 fpga2sdram2region0addr;
+	u32 fpga2sdram2region1addr;
+	u32 fpga2sdram2region2addr;
+	u32 fpga2sdram2region3addr;
+};
+
+/* for L3 master */
+struct socfpga_noc_fw_ddr_l3 {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 hpsregion0addr;
+	u32 hpsregion1addr;
+	u32 hpsregion2addr;
+	u32 hpsregion3addr;
+	u32 hpsregion4addr;
+	u32 hpsregion5addr;
+	u32 hpsregion6addr;
+	u32 hpsregion7addr;
+};
+
+struct socfpga_io48_mmr {
+	u32 dbgcfg0;
+	u32 dbgcfg1;
+	u32 dbgcfg2;
+	u32 dbgcfg3;
+	u32 dbgcfg4;
+	u32 dbgcfg5;
+	u32 dbgcfg6;
+	u32 reserve0;
+	u32 reserve1;
+	u32 reserve2;
+	u32 ctrlcfg0;
+	u32 ctrlcfg1;
+	u32 ctrlcfg2;
+	u32 ctrlcfg3;
+	u32 ctrlcfg4;
+	u32 ctrlcfg5;
+	u32 ctrlcfg6;
+	u32 ctrlcfg7;
+	u32 ctrlcfg8;
+	u32 ctrlcfg9;
+	u32 dramtiming0;
+	u32 dramodt0;
+	u32 dramodt1;
+	u32 sbcfg0;
+	u32 sbcfg1;
+	u32 sbcfg2;
+	u32 sbcfg3;
+	u32 sbcfg4;
+	u32 sbcfg5;
+	u32 sbcfg6;
+	u32 sbcfg7;
+	u32 caltiming0;
+	u32 caltiming1;
+	u32 caltiming2;
+	u32 caltiming3;
+	u32 caltiming4;
+	u32 caltiming5;
+	u32 caltiming6;
+	u32 caltiming7;
+	u32 caltiming8;
+	u32 caltiming9;
+	u32 caltiming10;
+	u32 dramaddrw;
+	u32 sideband0;
+	u32 sideband1;
+	u32 sideband2;
+	u32 sideband3;
+	u32 sideband4;
+	u32 sideband5;
+	u32 sideband6;
+	u32 sideband7;
+	u32 sideband8;
+	u32 sideband9;
+	u32 sideband10;
+	u32 sideband11;
+	u32 sideband12;
+	u32 sideband13;
+	u32 sideband14;
+	u32 sideband15;
+	u32 dramsts;
+	u32 dbgdone;
+	u32 dbgsignals;
+	u32 dbgreset;
+	u32 dbgmatch;
+	u32 counter0mask;
+	u32 counter1mask;
+	u32 counter0match;
+	u32 counter1match;
+	u32 niosreserve0;
+	u32 niosreserve1;
+	u32 niosreserve2;
+};
+#endif /*__ASSEMBLY__*/
+
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_MASK		0x1F000000
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_SHIFT	24
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_MASK		0x00F80000
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_SHIFT	19
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_MASK		0x0007C000
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_SHIFT	14
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK	0x00003E00
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT	9
+#define IO48_MMR_CTRLCFG0_AC_POS_MASK			0x00000180
+#define IO48_MMR_CTRLCFG0_AC_POS_SHIFT			7
+#define IO48_MMR_CTRLCFG0_DIMM_TYPE_MASK		0x00000070
+#define IO48_MMR_CTRLCFG0_DIM_TYPE_SHIFT		4
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_MASK			0x0000000F
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_SHIFT		0
+
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_DM		(1 << 30)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_DM		(1 << 29)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_DM		(1 << 28)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_DM		(1 << 27)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_DM		(1 << 26)
+#define IO48_MMR_CTRLCFG1_DQSTRK_EN			(1 << 25)
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_MASK		0x01F80000
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_SHIFT		19
+#define IO48_MMR_CTRLCFG1_REORDER_READ			(1 << 18)
+#define IO48_MMR_CTRLCFG1_DBC3_REORDER_RDATA		(1 << 17)
+#define IO48_MMR_CTRLCFG1_DBC2_REORDER_RDATA		(1 << 16)
+#define IO48_MMR_CTRLCFG1_DBC1_REORDER_RDATA		(1 << 15)
+#define IO48_MMR_CTRLCFG1_DBC0_REORDER_RDATA		(1 << 14)
+#define IO48_MMR_CTRLCFG1_CTRL_REORDER_RDATA		(1 << 13)
+#define IO48_MMR_CTRLCFG1_REORDER_DATA			(1 << 12)
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_ECC		(1 << 11)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_ECC		(1 << 10)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_ECC		(1 << 9)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_ECC		(1 << 8)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC		(1 << 7)
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK		0x00000060
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT		5
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_MASK	0x0000001F
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_SHIFT	0
+
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_MASK		0x3F000000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_SHIFT	24
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK	0x00FC0000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT	18
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK			0x0003F000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT		12
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_SHIFT		6
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK		0x0000003F
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_SHIFT		0
+
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_MASK		0x0003F000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_SHIFT		12
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT		6
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_MASK			0x0000003F
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_SHIFT			0
+
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT			6
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_MASK			0x3F000000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_SHIFT			24
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_MASK		0x00FC0000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_SHIFT		18
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK		0x0003F000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT	12
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT			6
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_MASK		0xFC000000
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_SHIFT		26
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_MASK		0x03FC0000
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_SHIFT		18
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT		6
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_MASK		0x0000003F
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_SHIFT		0
+
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK		0x000000FF
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_SHIFT		0
+
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK		0x00070000
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT		16
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK	0x0000C000
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT	14
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK		0x00003C00
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT		10
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK		0x000003E0
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT		5
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK		0x0000001F
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_SHIFT		0
+
+#define ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK		0x00000003
+
+#define ALT_ECC_HMC_OCP_INTSTAT_SERRPENA_SET_MSK	0x00000001
+#define ALT_ECC_HMC_OCP_INTSTAT_DERRPENA_SET_MSK	0x00000002
+#define ALT_ECC_HMC_OCP_ERRINTEN_SERRINTEN_SET_MSK	0x00000001
+#define ALT_ECC_HMC_OCP_ERRINTEN_DERRINTEN_SET_MSK	0x00000002
+#define ALT_ECC_HMC_OCP_INTMOD_INTONCMP_SET_MSK		0x00010000
+#define ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK	0x00010000
+#define ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK		0x00000100
+#define ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK		0x00000001
+#define ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK		0x00000100
+#define ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK		0x00000001
+
+#define ALT_ECC_HMC_OCP_SERRCNTREG_VALUE		8
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB	6
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB	12
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB	18
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB	21
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB	26
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB	31
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_AUTOPRECHARGE_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB	1
+
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB	4
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB	10
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB	2
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB	4
+
+#define ALT_NOC_FW_DDR_END_ADDR_LSB	16
+#define ALT_NOC_FW_DDR_ADDR_MASK	0xFFFF
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK		0x00000001
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK		0x00000002
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK		0x00000004
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK		0x00000008
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK		0x00000010
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK		0x00000020
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK		0x00000040
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK		0x00000080
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK		0x00000001
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK		0x00000002
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK		0x00000004
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK		0x00000008
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK	0x00000010
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK	0x00000020
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK	0x00000040
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK	0x00000080
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK	0x00000100
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK	0x00000200
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK	0x00000400
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK	0x00000800
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK	0x00001000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK	0x00002000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK	0x00004000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK	0x00008000
+
+#define ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK		0x0000003F
+#endif /* _SOCFPGA_SDRAM_A10_H_ */

new file mode 100644
index 0000000..abedc22
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void s_init(void)
+{
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	/* Address of boot parameters for ATAG (if ATAG is used) */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	return 0;
+}

index c45edea..e688c50 100644
@@ -15,6 +15,7 @@ void sysmgr_config_warmrstcfgio(int enable);
 void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
 #endif
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_system_manager {
 	/* System Manager Module */
 	u32	siliconid1;			/* 0x00 */

@@ -115,6 +116,77 @@ struct socfpga_system_manager {
 	u32	_pad_0x734;
 	u32	spim0usefpga;			/* 0x738 */
 };
+#else /* Arria10 System Manager */
+struct socfpga_system_manager {
+	u32  siliconid1;
+	u32  siliconid2;
+	u32  wddbg;
+	u32  bootinfo;
+	u32  mpu_ctrl_l2_ecc;
+	u32  _pad_0x14_0x1f[3];
+	u32  dma;
+	u32  dma_periph;
+	u32  sdmmcgrp_ctrl;
+	u32  sdmmc_l3master;
+	u32  nand_bootstrap;
+	u32  nand_l3master;
+	u32  usb0_l3master;
+	u32  usb1_l3master;
+	u32  emac_global;
+	u32  emac0;
+	u32  emac1;
+	u32  emac2;
+	u32  _pad_0x50_0x5f[4];
+	u32  fpgaintf_en_global;
+	u32  fpgaintf_en_0;
+	u32  fpgaintf_en_1;
+	u32  fpgaintf_en_2;
+	u32  fpgaintf_en_3;
+	u32  _pad_0x74_0x7f[3];
+	u32  noc_addr_remap_value;
+	u32  noc_addr_remap_set;
+	u32  noc_addr_remap_clear;
+	u32  _pad_0x8c_0x8f;
+	u32  ecc_intmask_value;
+	u32  ecc_intmask_set;
+	u32  ecc_intmask_clr;
+	u32  ecc_intstatus_serr;
+	u32  ecc_intstatus_derr;
+	u32  mpu_status_l2_ecc;
+	u32  mpu_clear_l2_ecc;
+	u32  mpu_status_l1_parity;
+	u32  mpu_clear_l1_parity;
+	u32  mpu_set_l1_parity;
+	u32  _pad_0xb8_0xbf[2];
+	u32  noc_timeout;
+	u32  noc_idlereq_set;
+	u32  noc_idlereq_clr;
+	u32  noc_idlereq_value;
+	u32  noc_idleack;
+	u32  noc_idlestatus;
+	u32  fpga2soc_ctrl;
+	u32  _pad_0xdc_0xff[9];
+	u32  tsmc_tsel_0;
+	u32  tsmc_tsel_1;
+	u32  tsmc_tsel_2;
+	u32  tsmc_tsel_3;
+	u32  _pad_0x110_0x200[60];
+	u32  romhw_ctrl;
+	u32  romcode_ctrl;
+	u32  romcode_cpu1startaddr;
+	u32  romcode_initswstate;
+	u32  romcode_initswlastld;
+	u32  _pad_0x214_0x217;
+	u32  warmram_enable;
+	u32  warmram_datastart;
+	u32  warmram_length;
+	u32  warmram_execution;
+	u32  warmram_crc;
+	u32  _pad_0x22c_0x22f;
+	u32  isw_handoff[8];
+	u32  romcode_bootromswstate[8];
+};
+#endif
 
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX	(1 << 0)
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO	(1 << 1)

@@ -146,4 +218,54 @@ struct socfpga_system_manager {
 #define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB			2
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK			0x3
 
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V		0x0
+#define VOLTAGE_SEL_1P8V	0x1
+#define VOLTAGE_SEL_2P5V	0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE	0
+#define INPUT_BUF_1P8V		1
+#define INPUT_BUF_2P5V3V	2
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE		0
+#define WK_PU_ENABLE		1
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW		0
+#define PU_SLW_RT_FAST		1
+#define PU_SLW_RT_DEFAULT	PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW		0
+#define PD_SLW_RT_FAST		1
+#define PD_SLW_RT_DEFAULT	PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT	0x10
+#define PD_DRV_STRG_DEFAULT	0x10
+
+/* bit position */
+#define PD_DRV_STRG_LSB		0
+#define PD_SLW_RT_LSB		5
+#define PU_DRV_STRG_LSB		8
+#define PU_SLW_RT_LSB		13
+#define WK_PU_LSB		16
+#define INPUT_BUF_LSB		17
+#define BIAS_TRIM_LSB		19
+#define VOLTAGE_SEL_LSB		0
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK	0x00000001
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK	0x00000010
+#define ALT_SYSMGR_NOC_F2H_SET_MSK	0x00000100
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK	0x00010000
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK	0x00100000
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK	0x01000000
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK	0x00000001
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK	0x00000002
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK	0x00000002
+
 #endif /* _SYSTEM_MANAGER_H_ */

index dd6b53b..c1e5969 100644
@@ -15,6 +15,7 @@
 #include <watchdog.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram_a10.h>
 #include <asm/arch/system_manager.h>
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>

@@ -30,8 +31,15 @@ static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 static struct socfpga_reset_manager *reset_manager_base =
 	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+#else
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
+	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
+#endif
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
 

@@ -253,9 +261,14 @@ static int socfpga_fpga_id(const bool print_id)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
+#else
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
+	puts("CPU:   Altera SoCFPGA Arria 10\n");
+#endif
 	printf("BOOT:  %s\n", bsel_str[bsel].name);
 	return 0;
 }

@@ -338,6 +351,7 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Convert all NIC-301 AMBA slaves from secure to non-secure
  */

@@ -461,6 +475,43 @@ int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	return 0;
 }
+#else
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+	/* Put OCRAM in non-secure */
+	writel(0x003f0000, &noc_fw_ocram_base->region0);
+	writel(0x1, &noc_fw_ocram_base->enable);
+
+	/* Put DDR in non-secure */
+	writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
+	writel(0x1, &noc_fw_ddr_l3_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+	initialize_security_policies();
+
+	/* Configure the L2 controller to make SDRAM start at 0 */
+	writel(0x1, &pl310->pl310_addr_filter_start);
+
+	/* assert reset to all except L4WD0 and L4TIMER0 */
+	socfpga_per_reset_all();
+
+	/* configuring the clock based on handoff */
+	/* TODO: Add call to cm_basic_init() */
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
+	return 0;
+}
+#endif
 
 U_BOOT_CMD(
 	bridge, 2, 1, do_bridge,

new file mode 100644
index 0000000..577f60f
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __CONFIG_SOCFGPA_ARRIA10_H__
+#define __CONFIG_SOCFGPA_ARRIA10_H__
+
+#include <asm/arch/base_addr_a10.h>
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PING
+
+/*
+ * Memory configurations
+ */
+#define PHYS_SDRAM_1_SIZE		0x2000000
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"zImage"
+#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
+#define CONFIG_BOOTCOMMAND      "run mmcload; run mmcboot"
+#define CONFIG_LOADADDR		0x01000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/*
+ * Display CPU and Board Info
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* Ethernet on SoC (EMAC) */
+#if defined(CONFIG_CMD_NET)
+
+/* PHY */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+
+#endif
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0/* device 0 */
+#define CONFIG_ENV_OFFSET		512/* just after the MBR */
+
+/*
+ * arguments passed to the bootz command. The value of
+ * CONFIG_BOOTARGS goes into the environment value "bootargs".
+ * Do note the value will overide also the chosen node in FDT blob.
+ */
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=n\0" \
+	"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
+		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"bootimage=zImage\0" \
+	"fdt_addr=100\0" \
+	"fdtimage=socfpga.dtb\0" \
+		"fsloadcmd=ext2load\0" \
+	"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"mmcroot=/dev/mmcblk0p2\0" \
+	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
+		" root=${mmcroot} rw rootwait;" \
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"mmcload=mmc rescan;" \
+		"load mmc 0:1 ${loadaddr} ${bootimage};" \
+		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+	"qspiroot=/dev/mtdblock0\0" \
+	"qspirootfstype=jffs2\0" \
+	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
+		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+		"bootm ${loadaddr} - ${fdt_addr}\0"
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+#endif	/* __CONFIG_H */

index e688c50..9ca889a 100644
@@ -203,8 +203,10 @@ struct socfpga_system_manager {
 
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define SYSMGR_SDMMC_SMPLSEL_SHIFT	3
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	0
 #else
 #define SYSMGR_SDMMC_SMPLSEL_SHIFT	4
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	12
 #endif
 
 #define SYSMGR_SDMMC_DRVSEL_SHIFT	0

index c1e5969..2645129 100644
@@ -261,12 +261,12 @@ static int socfpga_fpga_id(const bool print_id)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
+			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
 #else
-	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
 	puts("CPU:   Altera SoCFPGA Arria 10\n");
 #endif
 	printf("BOOT:  %s\n", bsel_str[bsel].name);

index 2f070f2..6225118 100644
@@ -15,6 +15,7 @@ void socfpga_bridges_reset(int enable);
 void socfpga_per_reset(u32 reset, int set);
 void socfpga_per_reset_all(void);
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_reset_manager {
 	u32	status;
 	u32	ctrl;

@@ -28,6 +29,42 @@ struct socfpga_reset_manager {
 	u32	padding2[12];
 	u32	tstscratch;
 };
+#else
+struct socfpga_reset_manager {
+	u32	stat;
+	u32	ramstat;
+	u32	miscstat;
+	u32	ctrl;
+	u32	hdsken;
+	u32	hdskreq;
+	u32	hdskack;
+	u32	counts;
+	u32	mpu_mod_reset;
+	u32	per_mod_reset;	/* stated as per0_mod_reset in A10 datasheet */
+	u32	per2_mod_reset;	/* stated as per1_mod_reset in A10 datasheet */
+	u32	brg_mod_reset;
+	u32	misc_mod_reset;	/* stated as sys_mod_reset in A10 datasheet */
+	u32	coldmodrst;
+	u32	nrstmodrst;
+	u32	dbgmodrst;
+	u32	mpuwarmmask;
+	u32	per0warmmask;
+	u32	per1warmmask;
+	u32	brgwarmmask;
+	u32	syswarmmask;
+	u32	nrstwarmmask;
+	u32	l3warmmask;
+	u32	tststa;
+	u32	tstscratch;
+	u32	hdsktimeout;
+	u32	hmcintr;
+	u32	hmcintren;
+	u32	hmcintrens;
+	u32	hmcintrenr;
+	u32	hmcgpout;
+	u32	hmcgpin;
+};
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2

@@ -55,6 +92,7 @@ struct socfpga_reset_manager {
 #define RSTMGR_BANK(_reset)			\
 	(((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK)
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
  * 0 ... mpumodrst

@@ -75,6 +113,33 @@ struct socfpga_reset_manager {
 #define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
 #define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
+#else
+/*
+ * SocFPGA Arria10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ * 4 ... sysmodrst
+ */
+#define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_EMAC2		RSTMGR_DEFINE(1, 2)
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(2, 0)
+#define RSTMGR_L4WD1		RSTMGR_DEFINE(2, 1)
+#define RSTMGR_L4SYSTIMER0	RSTMGR_DEFINE(2, 2)
+#define RSTMGR_L4SYSTIMER1	RSTMGR_DEFINE(2, 3)
+#define RSTMGR_SPTIMER0		RSTMGR_DEFINE(2, 4)
+#define RSTMGR_SPTIMER1		RSTMGR_DEFINE(2, 5)
+#define RSTMGR_UART0		RSTMGR_DEFINE(2, 16)
+#define RSTMGR_UART1		RSTMGR_DEFINE(2, 17)
+#define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 17)
+#define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 18)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 6)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 7)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 16)
+#define RSTMGR_DDRSCH		RSTMGR_DEFINE(3, 6)
+#endif
 
 /* Create a human-readable reference to SoCFPGA reset. */
 #define SOCFPGA_RESET(_name)	RSTMGR_##_name

index b6beaa2..d0ff6c4 100644
@@ -18,7 +18,9 @@ static const struct socfpga_reset_manager *reset_manager_base =
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
-/* Assert or de-assert SoCFPGA reset manager reset. */
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
 void socfpga_per_reset(u32 reset, int set)
 {
 	const void *reg;

@@ -46,13 +48,29 @@ void socfpga_per_reset(u32 reset, int set)
  * Assert reset on every peripheral but L4WD0.
  * Watchdog must be kept intact to prevent glitches
  * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
  */
 void socfpga_per_reset_all(void)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
 
 	writel(~l4wd0, &reset_manager_base->per_mod_reset);
 	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
+#else
+	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+
+	unsigned mask_ecc_ocp = 0x0000FF00;
+
+	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
+	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
+
+	/* Finally disable the ECC_OCP */
+	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
+#endif
 }
 
 /*

@@ -71,6 +89,7 @@ void reset_cpu(ulong addr)
 		;
 }
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Release peripherals from reset based on handoff
  */

@@ -78,6 +97,7 @@ void reset_deassert_peripherals_handoff(void)
 {
 	writel(0, &reset_manager_base->per_mod_reset);
 }
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 void socfpga_bridges_reset(int enable)

@@ -92,6 +112,7 @@ void socfpga_bridges_reset(int enable)
 
 void socfpga_bridges_reset(int enable)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
 				L3REGS_REMAP_HPS2FPGA_MASK |
 				L3REGS_REMAP_OCRAM_MASK;

@@ -116,5 +137,6 @@ void socfpga_bridges_reset(int enable)
 		/* Remap the bridges into memory map */
 		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
 	}
+#endif
 }
 #endif

index 75a65f3..9e1c3fd 100644
@@ -19,6 +19,7 @@ static struct socfpga_system_manager *sysmgr_regs =
  * The value is not wrote to SYSMGR.FPGAINTF.MODULE but
  * CONFIG_SYSMGR_ISWGRP_HANDOFF.
  */
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static void populate_sysmgr_fpgaintf_module(void)
 {
 	uint32_t handoff_val = 0;

@@ -83,3 +84,4 @@ void sysmgr_config_warmrstcfgio(int enable)
 		clrbits_le32(&sysmgr_regs->romcodegrp_ctrl,
 			     SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO);
 }
+#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */

index 31f1338..bbbde1e 100644
@@ -77,11 +77,6 @@
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
 
 /*
- * SDRAM controller
- */
-#define CONFIG_ALTERA_SDRAM
-
-/*
  * EPCS/EPCQx1 Serial Flash Controller
  */
 #ifdef CONFIG_ALTERA_SPI

index f1b2f2c..bfefafd 100644
@@ -278,8 +278,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
 	/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
 	socfpga_bridges_reset(1);
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* Unmap the bridges from NIC-301 */
 	writel(0x1, SOCFPGA_L3REGS_ADDRESS);
+#endif
 
 	/* Initialize the FPGA Manager */
 	status = fpgamgr_program_init();

index abedc22..8516633 100644
@@ -5,20 +5,3 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void s_init(void)
-{
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* Address of boot parameters for ATAG (if ATAG is used) */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	return 0;
-}

index 2645129..c97caea 100644
@@ -100,13 +100,10 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 		return;
 	}
 
-	/* Clearing emac0 PHY interface select to 0 */
-	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
-
 	/* configure to PHY interface select choosed */
-	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     phymode << physhift);
+	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
+			phymode << physhift);
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);

new file mode 100644
index 0000000..7619ca2
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+
+/* PER0MODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define EMAC2_RESET		34
+#define USB0_RESET		35
+#define USB1_RESET		36
+#define NAND_RESET		37
+#define QSPI_RESET		38
+#define SDMMC_RESET		39
+#define EMAC0_OCP_RESET		40
+#define EMAC1_OCP_RESET		41
+#define EMAC2_OCP_RESET		42
+#define USB0_OCP_RESET		43
+#define USB1_OCP_RESET		44
+#define NAND_OCP_RESET		45
+#define QSPI_OCP_RESET		46
+#define SDMMC_OCP_RESET		47
+#define DMA_RESET		48
+#define SPIM0_RESET		49
+#define SPIM1_RESET		50
+#define SPIS0_RESET		51
+#define SPIS1_RESET		52
+#define DMA_OCP_RESET		53
+#define EMAC_PTP_RESET		54
+/* 55 is empty*/
+#define DMAIF0_RESET		56
+#define DMAIF1_RESET		57
+#define DMAIF2_RESET		58
+#define DMAIF3_RESET		59
+#define DMAIF4_RESET		60
+#define DMAIF5_RESET		61
+#define DMAIF6_RESET		62
+#define DMAIF7_RESET		63
+
+/* PER1MODRST */
+#define L4WD0_RESET		64
+#define L4WD1_RESET		65
+#define L4SYSTIMER0_RESET	66
+#define L4SYSTIMER1_RESET	67
+#define SPTIMER0_RESET		68
+#define SPTIMER1_RESET		69
+/* 70-71 is reserved */
+#define I2C0_RESET		72
+#define I2C1_RESET		73
+#define I2C2_RESET		74
+#define I2C3_RESET		75
+#define I2C4_RESET		76
+/* 77-79 is reserved */
+#define UART0_RESET		80
+#define UART1_RESET		81
+/* 82-87 is reserved */
+#define GPIO0_RESET		88
+#define GPIO1_RESET		89
+#define GPIO2_RESET		90
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+#define F2SSDRAM0_RESET		99
+#define F2SSDRAM1_RESET		100
+#define F2SSDRAM2_RESET		101
+#define DDRSCH_RESET		102
+
+/* SYSMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+/* 130 is reserved */
+#define FPGAMGR_RESET		131
+#define S2F_RESET		132
+#define SYSDBG_RESET		133
+#define OCRAM_OCP_RESET		134
+
+/* COLDMODRST */
+#define CLKMGRCOLD_RESET	160
+/* 161-162 is reserved */
+#define S2FCOLD_RESET		163
+#define TIMESTAMPCOLD_RESET	164
+#define TAPCOLD_RESET		165
+#define HMCCOLD_RESET		166
+#define IOMGRCOLD_RESET		167
+
+/* NRSTMODRST */
+#define NRSTPINOE_RESET		192
+
+/* DBGMODRST */
+#define DBG_RESET		224
+#endif

index 9ca889a..831ba4a 100644
@@ -133,9 +133,7 @@ struct socfpga_system_manager {
 	u32  usb0_l3master;
 	u32  usb1_l3master;
 	u32  emac_global;
-	u32  emac0;
-	u32  emac1;
-	u32  emac2;
+	u32  emac[3];
 	u32  _pad_0x50_0x5f[4];
 	u32  fpgaintf_en_global;
 	u32  fpgaintf_en_0;

index c97caea..510aa1d 100644
@@ -21,7 +21,11 @@
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #include <dt-bindings/reset/altr,rst-mgr.h>
+#else
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 

@@ -95,15 +99,25 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 	} else if (of_reset_id == EMAC1_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
 		reset = SOCFPGA_RESET(EMAC1);
+#ifndef CONFIG_TARGET_SOCFPGA_GEN5
+	} else if (of_reset_id == EMAC2_RESET) {
+		reset = SOCFPGA_RESET(EMAC2);
+#endif
 	} else {
 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
 		return;
 	}
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* configure to PHY interface select choosed */
 	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
 			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
 			phymode << physhift);
+#else
+	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+			phymode);
+#endif
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);

new file mode 100755
index 0000000..411518d
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_
+#define _SOCFPGA_S10_BASE_HARDWARE_H_
+
+#define SOCFPGA_SMMU_ADDRESS			0xfa000000
+#define SOCFPGA_EMAC0_ADDRESS			0xff800000
+#define SOCFPGA_EMAC1_ADDRESS			0xff802000
+#define SOCFPGA_EMAC2_ADDRESS			0xff804000
+#define SOCFPGA_SDMMC_ADDRESS			0xff808000
+#define SOCFPGA_USB0_ADDRESS			0xffb00000
+#define SOCFPGA_USB1_ADDRESS			0xffb40000
+#define SOCFPGA_NANDREGS_ADDRESS		0xffb80000
+#define SOCFPGA_NANDDATA_ADDRESS		0xffb90000
+#define SOCFPGA_UART0_ADDRESS			0xffc02000
+#define SOCFPGA_UART1_ADDRESS			0xffc02100
+#define SOCFPGA_I2C0_ADDRESS			0xffc02800
+#define SOCFPGA_I2C1_ADDRESS			0xffc02900
+#define SOCFPGA_I2C2_ADDRESS			0xffc02a00
+#define SOCFPGA_I2C3_ADDRESS			0xffc02b00
+#define SOCFPGA_I2C4_ADDRESS			0xffc02c00
+#define SOCFPGA_SPTIMER0_ADDRESS		0xffc03000
+#define SOCFPGA_SPTIMER1_ADDRESS		0xffc03100
+#define SOCFPGA_GPIO0_ADDRESS			0xffc03200
+#define SOCFPGA_GPIO1_ADDRESS			0xffc03300
+#define SOCFPGA_SYSTIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_SYSTIMER0_ADDRESS		0xffd00100
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00200
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00300
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00400
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00500
+#define SOCFPGA_CLKMGR_ADDRESS			0xffd10000
+#define SOCFPGA_RSTMGR_ADDRESS			0xffd11000
+#define SOCFPGA_SYSMGR_ADDRESS			0xffd12000
+#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS	0xffd13000
+#define SOCFPGA_DMANONSECURE_ADDRESS		0xffda0000
+#define SOCFPGA_DMASECURE_ADDRESS		0xffda1000
+#define SOCFPGA_SPIS0_ADDRESS			0xffda2000
+#define SOCFPGA_SPIS1_ADDRESS			0xffda3000
+#define SOCFPGA_SPIM0_ADDRESS			0xffda4000
+#define SOCFPGA_SPIM1_ADDRESS			0xffda5000
+#define SOCFPGA_OCRAM_ADDRESS			0xffe00000
+
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */

index d074478..73e3a46 100644
@@ -155,6 +155,14 @@ enum fdt_compat_id {
 	COMPAT_INTEL_BAYTRAIL_FSP_MDP,	/* Intel FSP memory-down params */
 	COMPAT_INTEL_IVYBRIDGE_FSP,	/* Intel Ivy Bridge FSP */
 	COMPAT_SUNXI_NAND,		/* SUNXI NAND controller */
+	COMPAT_ALTERA_SOCFPGA_CLK,	/* SoCFPGA Clock initialization */
+	COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE,	/* pinctrl-single */
+	COMPAT_ALTERA_SOCFPGA_H2F_BRG,          /* Arria10 hps2fpga bridge */
+	COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,        /* Arria10 lwhps2fpga bridge */
+	COMPAT_ALTERA_SOCFPGA_F2H_BRG,          /* Arria10 fpga2hps bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR0,           /* Arria10 fpga2SDRAM0 bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR1,           /* Arria10 fpga2SDRAM1 bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR2,           /* Arria10 fpga2SDRAM2 bridge */
 
 	COMPAT_COUNT,
 };

index 81f47ef..ebe4a9a 100644
@@ -66,6 +66,14 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"),
 	COMPAT(INTEL_IVYBRIDGE_FSP, "intel,ivybridge-fsp"),
 	COMPAT(COMPAT_SUNXI_NAND, "allwinner,sun4i-a10-nand"),
+	COMPAT(ALTERA_SOCFPGA_CLK, "altr,clk-mgr"),
+	COMPAT(ALTERA_SOCFPGA_PINCTRL_SINGLE, "pinctrl-single"),
+	COMPAT(ALTERA_SOCFPGA_H2F_BRG, "altr,socfpga-hps2fpga-bridge"),
+	COMPAT(ALTERA_SOCFPGA_LWH2F_BRG, "altr,socfpga-lwhps2fpga-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2H_BRG, "altr,socfpga-fpga2hps-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR0, "altr,socfpga-fpga2sdram0-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR1, "altr,socfpga-fpga2sdram1-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR2, "altr,socfpga-fpga2sdram2-bridge"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)

index 902c321..2d66580 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2014-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

@@ -36,10 +36,13 @@
 #define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
 #define SOCFPGA_UART0_ADDRESS			0xffc02000
 #define SOCFPGA_OSC1TIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_OSC1TIMER1_ADDRESS		0xffd00100
 #define SOCFPGA_CLKMGR_ADDRESS			0xffd04000
 #define SOCFPGA_RSTMGR_ADDRESS			0xffd05000
 
 #define SOCFPGA_SDR_ADDRESS			0xffcfb000
+#define SOCFPGA_NOC_L4_PRIV_FLT_OFST        	0xffd11000
+#define SOCFPGA_NOC_FW_H2F_SCR_OFST		0xffd13500
 #define SOCFPGA_SDR_SCHEDULER_ADDRESS		0xffd12400
 #define SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS	0xffd13200
 #define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS	0xffd13300

index 9e1c3fd..e1f0082 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

@@ -11,8 +11,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+#endif
 
 /*
  * Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux setting.

index bfefafd..7fd922e 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
  * All rights reserved.
  *
  * SPDX-License-Identifier:	BSD-3-Clause

@@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct socfpga_fpga_manager *fpgamgr_regs =
 	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+#endif
 
 /* Set CD ratio */
 static void fpgamgr_set_cd_ratio(unsigned long ratio)

@@ -267,9 +269,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
 	}
 
 	/* Prior programming the FPGA, all bridges need to be shut off */
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* Disable all signals from hps peripheral controller to fpga */
 	writel(0, &sysmgr_regs->fpgaintfgrp_module);
+#endif
 
 	/* Disable all signals from FPGA to HPS SDRAM */
 #define SDR_CTRLGRP_FPGAPORTRST_ADDRESS	0x5080

100 lines not on this page · raw message

index bbbde1e..fde9a51 100644
@@ -15,7 +15,9 @@
  * High level configuration
  */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_ARCH_MISC_INIT
+#endif
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_CLOCKS

@@ -37,9 +39,13 @@
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x40000 /* 256KB */
+#endif
 #define CONFIG_SYS_INIT_SP_OFFSET		\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR			\

@@ -213,11 +219,14 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_NS16550_CLK		1000000
-#else
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
 #define CONFIG_SYS_NS16550_CLK		100000000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
+#define CONFIG_SYS_NS16550_CLK         	50000000
 #endif
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200

@@ -295,23 +304,39 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 /*
  * SPL
  *
- * SRAM Memory layout:
+ * SRAM Memory layout(TARGET_SOCFPGA_GEN5):
  *
  * 0xFFFF_0000 ...... Start of SRAM
  * 0xFFFF_xxxx ...... Top of stack (grows down)
  * 0xFFFF_yyyy ...... Malloc area
  * 0xFFFF_zzzz ...... Global Data
  * 0xFFFF_FF00 ...... End of SRAM
+ *
+ * SRAM Memory layout(TARGET_SOCFPGA_ARRIA10):
+ *
+ * 0xFFE0_0000 ...... Start of SRAM
+ * 0xFFE0_xxxx ...... Top of stack (grows down)
+ * 0xFFE0_yyyy ...... Malloc area
+ * 0xFFE0_zzzz ...... Global Data
+ * 0xFFE3_FFFF ...... End of SRAM
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
+#endif
 
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	2
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#endif
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot-dtb.img"
 #else
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	1

188 lines not on this page · raw message

131 lines not on this page · raw message

407 lines not on this page · raw message

137 lines not on this page · raw message

new file mode 100644
index 0000000..045268d
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef _MISC_H_
+#define	_MISC_H_
+
+extern void dwmac_deassert_reset(const unsigned int of_reset_id,
+				 const u32 phymode);
+
+struct bsel{
+	const char	*mode;
+	const char	*name;
+};
+
+extern struct bsel bsel_str[];
+
+#ifdef CONFIG_FPGA
+extern void socfpga_fpga_add(void);
+#else
+inline void socfpga_fpga_add(void) {}
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int dedicated_uart_com_port(const void *blob);
+unsigned int shared_uart_com_port(const void *blob);
+unsigned int uart_com_port(const void *blob);
+#endif
+
+#endif /* _MISC_H_ */

472 lines not on this page · raw message

255 lines not on this page · raw message

320 lines not on this page · raw message

index aa71636..d209f7d 100644
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

@@ -7,416 +7,287 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/clock_manager.h>
+#include <fdtdec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* Function prototypes */
+/* Common prototypes */
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+static void cm_print_clock_quick_summary(void);
+int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+void cm_wait_for_lock(uint32_t mask);
+void cm_wait_for_fsm(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+
 static const struct socfpga_clock_manager *clock_manager_base =
 	(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
 
-static void cm_wait_for_lock(uint32_t mask)
+/* Common functions */
+int set_cpu_clk_info(void)
 {
-	register uint32_t inter_val;
-	uint32_t retry = 0;
-	do {
-		inter_val = readl(&clock_manager_base->inter) & mask;
-		if (inter_val == mask)
-			retry++;
-		else
-			retry = 0;
-		if (retry >= 10)
-			break;
-	} while (1);
-}
+	/* Calculate the clock frequencies required for drivers */
+	cm_get_l4_sp_clk_hz();
+	cm_get_mmc_controller_clk_hz();
 
-/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
-{
-	while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
-		;
-}
+	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
+	gd->bd->bi_dsp_freq = 0;
 
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
-	writel(val, &clock_manager_base->bypass);
-	cm_wait_for_fsm();
-}
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	gd->bd->bi_ddr_freq = 0;
+#endif
 
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
-	writel(val, &clock_manager_base->ctrl);
-	cm_wait_for_fsm();
+	return 0;
 }
 
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
-				uint32_t reg_address, uint32_t mask)
+unsigned int cm_get_spi_controller_clk_hz(void)
 {
-	/* poll until phase is zero */
-	while (readl(reg_address) & mask)
-		;
+	uint32_t clock = 0;
 
-	writel(value, reg_address);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
+	clock = cm_get_per_vco_clk_hz();
 
-	while (readl(reg_address) & mask)
-		;
-}
+	/* get the clock prior L4 SP divider (periph_base_clk) */
+	reg = readl(&clock_manager_base->per_pll.perbaseclk);
+	clock /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+#endif
 
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
+	return clock;
+}
 
-void cm_basic_init(const struct cm_config * const cfg)
+unsigned int cm_get_qspi_controller_clk_hz(void)
 {
-	unsigned long end;
-
-	/* Start by being paranoid and gate all sw managed clocks */
-
-	/*
-	 * We need to disable nandclk
-	 * and then do another apb access before disabling
-	 * gatting off the rest of the periperal clocks.
-	 */
-	writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
-		readl(&clock_manager_base->per_pll.en),
-		&clock_manager_base->per_pll.en);
-
-	/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
-	writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
-		&clock_manager_base->main_pll.en);
-
-	writel(0, &clock_manager_base->sdr_pll.en);
-
-	/* now we can gate off the rest of the peripheral clocks */
-	writel(0, &clock_manager_base->per_pll.en);
-
-	/* Put all plls in bypass */
-	cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
-			CLKMGR_BYPASS_MAINPLL);
-
-	/* Put all plls VCO registers back to reset value. */
-	writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->main_pll.vco);
-	writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->per_pll.vco);
-	writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * The clocks to the flash devices and the L4_MAIN clocks can
-	 * glitch when coming out of safe mode if their source values
-	 * are different from their reset value.  So the trick it to
-	 * put them back to their reset state, and change input
-	 * after exiting safe mode but before ungating the clocks.
-	 */
-	writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
-	       &clock_manager_base->per_pll.src);
-	writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
-	       &clock_manager_base->main_pll.l4src);
-
-	/* read back for the required 5 us delay. */
-	readl(&clock_manager_base->main_pll.vco);
-	readl(&clock_manager_base->per_pll.vco);
-	readl(&clock_manager_base->sdr_pll.vco);
-
-
-	/*
-	 * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
-	 * with numerator and denominator.
-	 */
-	writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
-	writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
-	writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * Time starts here. Must wait 7 us from
-	 * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
-	 */
-	end = timer_get_us() + 7;
-
-	/* main mpu */
-	writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
-	/* main main clock */
-	writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
-	/* main for dbg */
-	writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
-	/* main for cfgs2fuser0clk */
-	writel(cfg->cfg2fuser0clk,
-	       &clock_manager_base->main_pll.cfgs2fuser0clk);
-
-	/* Peri emac0 50 MHz default to RMII */
-	writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
-	/* Peri emac1 50 MHz default to RMII */
-	writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
-	/* Peri QSPI */
-	writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
-	writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
-	/* Peri pernandsdmmcclk */
-	writel(cfg->mainnandsdmmcclk,
-	       &clock_manager_base->main_pll.mainnandsdmmcclk);
-
-	writel(cfg->pernandsdmmcclk,
-	       &clock_manager_base->per_pll.pernandsdmmcclk);
-
-	/* Peri perbaseclk */
-	writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
-	/* Peri s2fuser1clk */
-	writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
-	/* 7 us must have elapsed before we can enable the VCO */
-	while (timer_get_us() < end)
-		;
-
-	/* Enable vco */
-	/* main pll vco */
-	writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->main_pll.vco);
+	uint32_t clock = 0;
 
-	/* periferal pll */
-	writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->per_pll.vco);
-
-	/* sdram pll vco */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/* L3 MP and L3 SP */
-	writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
-	writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
-	writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
-	/* L4 MP, L4 SP, can0, and can1 */
-	writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
-	writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
-	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
-	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
-	CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
-	cm_wait_for_lock(LOCKED_MASK);
-
-	/* write the sdram clock counters before toggling outreset all */
-	writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqsclk);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
+	/* identify the source of QSPI clock */
+	reg = readl(&clock_manager_base->per_pll.src);
+	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
 
-	writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddr2xdqsclk);
+	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+		clock = cm_get_f2s_per_ref_clk_hz();
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+		clock = cm_get_main_vco_clk_hz();
 
-	writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqclk);
+		/* get the qspi clock */
+		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
+		clock /= (reg + 1);
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+		clock = cm_get_per_vco_clk_hz();
 
-	writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.s2fuser2clk);
+		/* get the qspi clock */
+		reg = readl(&clock_manager_base->per_pll.perqspiclk);
+		clock /= (reg + 1);
+	}
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+#endif
 
-	/*
-	 * after locking, but before taking out of bypass
-	 * assert/deassert outresetall
-	 */
-	uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
+	return clock;
+}
 
-	/* assert main outresetall */
-	writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
+void cm_wait_for_lock(uint32_t mask)
+{
+	register uint32_t inter_val;
+	uint32_t retry = 0;
+	do {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+		inter_val = readl(&clock_manager_base->stat) & mask;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+		inter_val = readl(&clock_manager_base->inter) & mask;
+#endif
+		/* Wait for stable lock */
+		if (inter_val == mask)
+			retry++;
+		else
+			retry = 0;
+		if (retry >= 10)
+			break;
+	} while (1);
+}
 
-	uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	uint32_t reg, clk_hz;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	clk_hz = cm_get_main_vco_clk_hz();
 
-	/* assert pheriph outresetall */
-	writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
+	/* get the MPU clock */
+	reg = readl(&clock_manager_base->altera.mpuclk);
+	clk_hz /= (reg + 1);
+	reg = readl(&clock_manager_base->main_pll.mpuclk);
+	clk_hz /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t clk_src, mainmpuclk_reg;
 
-	/* assert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
-		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
-		&clock_manager_base->sdr_pll.vco);
+	mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk);
 
-	/* deassert main outresetall */
-	writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
+	clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) &
+		CLKMGR_MAINPLL_MPUCLK_SRC_MSK;
 
-	/* deassert pheriph outresetall */
-	writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
+	reg = readl(&clock_manager_base->altera.mpuclk);
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (clk_src) {
+	case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
+		clk_hz /= ((reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+			   + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+		clk_hz = cm_get_per_vco_clk_hz();
+		clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-	/* deassert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
+	clk_hz /= ((mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+#endif
 
-	/*
-	 * now that we've toggled outreset all, all the clocks
-	 * are aligned nicely; so we can change any phase.
-	 */
-	cm_write_with_phase(cfg->ddrdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
-			    CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+	return clk_hz;
+}
 
-	/* SDRAM DDR2XDQSCLK */
-	cm_write_with_phase(cfg->ddr2xdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
-			    CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+unsigned int cm_get_per_vco_clk_hz(void)
+{
+	uint32_t src_hz = 0;
+	uint32_t clk_src = 0;
+	uint32_t numer = 0;
+	uint32_t denom = 0;
+	uint32_t vco = 0;
 
-	cm_write_with_phase(cfg->ddrdqclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
-			    CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	/* identify PER PLL clock source */
+	clk_src = readl(&clock_manager_base->per_pll.vco);
+	clk_src = (clk_src & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+	if (clk_src == CLKMGR_VCO_SSRC_EOSC1)
+		src_hz = cm_get_osc_clk_hz(1);
+	else if (clk_src == CLKMGR_VCO_SSRC_EOSC2)
+		src_hz = cm_get_osc_clk_hz(2);
+	else if (clk_src == CLKMGR_VCO_SSRC_F2S)
+		src_hz = cm_get_f2s_per_ref_clk_hz();
 
-	cm_write_with_phase(cfg->s2fuser2clk,
-			    (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
-			    CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+	/* get the PER VCO clock */
+	vco = readl(&clock_manager_base->per_pll.vco);
+
+	numer = (vco & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+		CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET;
+
+	denom = (vco & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+		CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET;
+
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clk_src = readl(&clock_manager_base->per_pll.vco0);
+
+	clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) &
+		CLKMGR_PERPLL_VCO0_PSRC_MSK;
+
+	if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) {
+		src_hz = eosc1_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) {
+		src_hz = cb_intosc_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) {
+		src_hz = f2s_free_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) {
+		src_hz = cm_get_main_vco_clk_hz();
+		src_hz /= (readl
+			(&clock_manager_base->main_pll.cntr15clk) &
+			CLKMGR_MAINPLL_CNTRCLK_MSK) + 1;
+	} else {
+		printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-	/* Take all three PLLs out of bypass when safe mode is cleared. */
-	cm_write_bypass(0);
+	vco = readl(&clock_manager_base->per_pll.vco1);
 
-	/* clear safe mode */
-	cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
+	numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK;
 
-	/*
-	 * now that safe mode is clear with clocks gated
-	 * it safe to change the source mux for the flashes the the L4_MAIN
-	 */
-	writel(cfg->persrc, &clock_manager_base->per_pll.src);
-	writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
+	denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) &
+			CLKMGR_PERPLL_VCO1_DENOM_MSK;
+#endif
 
-	/* Now ungate non-hw-managed clocks */
-	writel(~0, &clock_manager_base->main_pll.en);
-	writel(~0, &clock_manager_base->per_pll.en);
-	writel(~0, &clock_manager_base->sdr_pll.en);
+	vco = src_hz;
+	vco /= (1 + denom);
+	vco *= (1 + numer);
 
-	/* Clear the loss of lock bits (write 1 to clear) */
-	writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
-	       CLKMGR_INTER_MAINPLLLOST_MASK,
-	       &clock_manager_base->inter);
+	return vco;
 }
 
-static unsigned int cm_get_main_vco_clk_hz(void)
+unsigned int cm_get_main_vco_clk_hz(void)
 {
-	uint32_t reg, clock;
+	uint32_t src_hz, numer, denom, vco;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* get the main VCO clock */
-	reg = readl(&clock_manager_base->main_pll.vco);
-	clock = cm_get_osc_clk_hz(1);
-	clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify PER PLL clock source */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_per_ref_clk_hz();
-
-	/* get the PER VCO clock */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
+	vco = readl(&clock_manager_base->main_pll.vco);
+
+	numer = ((vco & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+		CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET);
+	denom = ((vco & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+		 CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET);
+
+	src_hz = cm_get_osc_clk_hz(1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t clk_src = readl(&clock_manager_base->main_pll.vco0);
+
+	clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) &
+		CLKMGR_MAINPLL_VCO0_PSRC_MSK;
+
+	if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) {
+		src_hz = eosc1_hz;
+	} else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) {
+		src_hz = cb_intosc_hz;
+	} else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) {
+		src_hz = f2s_free_hz;
+	} else {
+		printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-unsigned long cm_get_mpu_clk_hz(void)
-{
-	uint32_t reg, clock;
+	vco = readl(&clock_manager_base->main_pll.vco1);
 
-	clock = cm_get_main_vco_clk_hz();
+	numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK;
 
-	/* get the MPU clock */
-	reg = readl(&clock_manager_base->altera.mpuclk);
-	clock /= (reg + 1);
-	reg = readl(&clock_manager_base->main_pll.mpuclk);
-	clock /= (reg + 1);
-	return clock;
-}
+	denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) &
+			CLKMGR_MAINPLL_VCO1_DENOM_MSK;
+#endif
 
-unsigned long cm_get_sdram_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify SDRAM PLL clock source */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_sdr_ref_clk_hz();
-
-	/* get the SDRAM VCO clock */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	/* get the SDRAM (DDR_DQS) clock */
-	reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
-	reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
-	      CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
-	clock /= (reg + 1);
+	vco = src_hz;
+	vco /= (1 + denom);
+	vco *= (1 + numer);
 
-	return clock;
+	return vco;
 }
 
 unsigned int cm_get_l4_sp_clk_hz(void)
 {
-	uint32_t reg, clock = 0;
+	uint32_t clock = 0;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
 	/* identify the source of L4 SP clock */
 	reg = readl(&clock_manager_base->main_pll.l4src);
 	reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>

@@ -443,106 +314,117 @@ unsigned int cm_get_l4_sp_clk_hz(void)
 	reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
 	      CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
 	clock = clock / (1 << reg);
-
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB);
+#endif
 	return clock;
 }
 
-unsigned int cm_get_mmc_controller_clk_hz(void)
+/* function to poll in the fsm busy bit */
+void cm_wait_for_fsm(void)
 {
-	uint32_t reg, clock = 0;
-
-	/* identify the source of MMC clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
-	if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
-		clock /= (reg + 1);
-	}
-
-	/* further divide by 4 as we have fixed divider at wrapper */
-	clock /= 4;
-	return clock;
+	while (readl(&clock_manager_base->stat) &
+		CLKMGR_CLKMGR_STAT_BUSY_SET_MSK);
 }
 
-unsigned int cm_get_qspi_controller_clk_hz(void)
+unsigned int cm_get_mmc_controller_clk_hz(void)
 {
-	uint32_t reg, clock = 0;
-
-	/* identify the source of QSPI clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+	uint32_t clk_hz = 0;
+	uint32_t clk_input = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clk_input = readl(&clock_manager_base->per_pll.cntr6clk);
+	clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) &
+		CLKMGR_PERPLLGRP_SRC_MSK;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	clk_input = readl(&clock_manager_base->per_pll.src);
+	clk_input = (clk_input & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+#endif
+
+	switch (clk_input) {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	case CLKMGR_PERPLLGRP_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
+		clk_hz /= 1 +
+			(readl
+			(&clock_manager_base->main_pll.cntr6clk) &
+			CLKMGR_MAINPLL_CNTRCLK_MSK);
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_PERI:
+		clk_hz = cm_get_per_vco_clk_hz();
+		clk_hz /= 1 + (readl
+			(&clock_manager_base->per_pll.cntr6clk) &
+			CLKMGR_PERPLL_CNTRCLK_MSK);
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	case CLKMGR_SDMMC_CLK_SRC_F2S:
+		clk_hz = cm_get_f2s_per_ref_clk_hz();
+		break;
+
+	case CLKMGR_SDMMC_CLK_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
 
-	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
+		/* get the SDMMC clock */
+		clk_input =
+			readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
+		clk_hz /= (clk_input + 1);
+		break;
 
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
+	case CLKMGR_SDMMC_CLK_SRC_PER:
+		clk_hz = cm_get_per_vco_clk_hz();
 
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->per_pll.perqspiclk);
-		clock /= (reg + 1);
+		/* get the SDMMC clock */
+		clk_input =
+			readl(&clock_manager_base->per_pll.pernandsdmmcclk);
+		clk_hz /= (clk_input + 1);
+		break;
+#endif
 	}
-
-	return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	clock = cm_get_per_vco_clk_hz();
-
-	/* get the clock prior L4 SP divider (periph_base_clk) */
-	reg = readl(&clock_manager_base->per_pll.perbaseclk);
-	clock /= (reg + 1);
-
-	return clock;
+	return clk_hz/4;
 }
 
 static void cm_print_clock_quick_summary(void)
 {
 	printf("MPU       %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+	printf("QSPI        %8d kHz\n",
+		cm_get_qspi_controller_clk_hz() / 1000);
+	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	printf("EOSC1       %8d kHz\n", eosc1_hz / 1000);
+	printf("cb_intosc   %8d kHz\n", cb_intosc_hz / 1000);
+	printf("f2s_free    %8d kHz\n", f2s_free_hz / 1000);
+	printf("Main VCO    %8d kHz\n", cm_get_main_vco_clk_hz()/1000);
+	printf("NOC         %8d kHz\n", cm_get_noc_clk_hz()/1000);
+	printf("L4 Main	    %8d kHz\n",
+	       cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB)/1000);
+	printf("L4 MP       %8d kHz\n",
+	       cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB)/1000);
+	printf("L4 SP       %8d kHz\n",
+	       cm_get_l4_sp_clk_hz()/1000);
+	printf("L4 sys free %8d kHz\n", cm_l4_sys_free_clk_hz/1000);
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	printf("DDR       %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
 	printf("EOSC1       %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
 	printf("EOSC2       %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
 	printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
 	printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
-	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
-	printf("QSPI        %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
 	printf("UART        %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
-	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
-int set_cpu_clk_info(void)
-{
-	/* Calculate the clock frequencies required for drivers */
-	cm_get_l4_sp_clk_hz();
-	cm_get_mmc_controller_clk_hz();
-
-	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
-	gd->bd->bi_dsp_freq = 0;
-	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
-
-	return 0;
+#endif
 }
 
 int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])