drm/i915: Fix BXT DSI disable sequence
Subsystems (2)
PATCH 7/14 drm/i915: Fix BXT DSI disable sequence
From: Uma Shankar <[email protected]>
Fix BXT DSI disable sequence as per latest updates in BSpec.
Signed-off-by Uma Shankar <[email protected]>
--- drivers/gpu/drm/i915/intel_dsi.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_dsi.c +28 -4
@@ -620,8 +620,10 @@ static void intel_dsi_disable(struct intel_encoder *encoder)for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port); -intel_dsi_port_disable (encoder); -msleep (2 ); +if (!IS_BROXTON (dev_priv)) { +intel_dsi_port_disable (encoder); +msleep (2 ); + } }for_each_dsi_port (port, intel_dsi->ports) {
@@ -629,7 +631,11 @@ static void intel_dsi_disable(struct intel_encoder *encoder)I915_WRITE (MIPI_DEVICE_READY (port),0x0 );intel_dsi_reset_clocks (encoder, port); -I915_WRITE (MIPI_EOT_DISABLE (port),CLOCKSTOP ); + temp =0 ; +if (intel_dsi->clock_stop) { + temp |=CLOCKSTOP ; +I915_WRITE (MIPI_EOT_DISABLE (port), temp); + } temp =I915_READ (MIPI_DSI_FUNC_PRG (port)); temp &= ~VID_MODE_FORMAT_MASK ;
@@ -694,12 +700,26 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder, {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +u32 val; +enum port port;DRM_DEBUG_KMS ("\n" );intel_dsi_disable (encoder); -intel_dsi_clear_device_ready (encoder); +if (IS_BROXTON (dev_priv)) { +/* +* Reset the DSI Device ready first for both ports +* and then port control registers for both ports +*/ +for_each_dsi_port (port, intel_dsi->ports) +I915_WRITE (MIPI_DEVICE_READY (port),0 ); + +for_each_dsi_port (port, intel_dsi->ports) +I915_WRITE (BXT_MIPI_PORT_CTRL (port),0 ); + }else { +intel_dsi_clear_device_ready (encoder); + }intel_disable_dsi_pll (encoder);
@@ -713,8 +733,12 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,drm_panel_unprepare (intel_dsi->panel); +/* Disable Panel */ +drm_panel_power_off (intel_dsi->panel);msleep (intel_dsi->panel_off_delay); +intel_disable_dsi_pll (encoder); +/* Panel Disable over CRC PMIC */ if (intel_dsi->gpio_panel)gpiod_set_value_cansleep (intel_dsi->gpio_panel,0 );
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx