Skip to contentSkip to conversation

ASoC: Intel: Skylake: Driver updates on DSP firmware

PATCH Superseded [email protected] 2 participants 5 messages Jan 12, 2017

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover ASoC: Intel: Skylake: Driver updates on DSP firmware

From: Jeeja KP <[email protected]>

This patch series provides update on DSP firmware download by optimizing
o updating the dsp register poll method to use accurate timeout.
o optimizing ROM init retries.
o saving the firmware/library context at boot and use this ctx for downloading the firmware to DSP memory.
o cleanup to store the library manifest data
o release the firmware in cleanup routine.

Changes in v2:
- changed the title to remove fix as this is optimization.
- removed already merged 4 patchs

Jeeja KP (2):
ASoC: Intel: bxtn: Store the FW/Library context at boot
ASoC: Intel: bxtn: optimize ROM init retries

 sound/soc/intel/skylake/bxt-sst.c | 82 +++++++++++++++++++++++++--------------
 1 file changed, 52 insertions(+), 30 deletions(-)
Signature · 1 line
2.5.0
#1 lore raw

PATCH v2 1/2 ASoC: Intel: bxtn: Store the FW/Library context at boot

From: Jeeja KP <[email protected]>

Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory.

---
 sound/soc/intel/skylake/bxt-sst.c | 55 +++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 19 deletions(-)
sound/soc/intel/skylake/bxt-sst.c +36 -19
index 15a063a..7762d5a 100644
@@ -50,33 +50,47 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
 	 return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
 }
 
+static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count)
+{
+	int i;
+
+	for (i = 1; i < lib_count; i++) {
+		if (linfo[i].fw) {
+			release_firmware(linfo[i].fw);
+			linfo[i].fw = NULL;
+		}
+	}
+}
+
 static int
 bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count)
 {
 	struct snd_dma_buffer dmab;
 	struct skl_sst *skl = ctx->thread_context;
-	const struct firmware *fw = NULL;
 	struct firmware stripped_fw;
 	int ret = 0, i, dma_id, stream_tag;
 
 	/* library indices start from 1 to N. 0 represents base FW */
 	for (i = 1; i < lib_count; i++) {
-		ret = request_firmware(&fw, linfo[i].name, ctx->dev);
-		if (ret < 0) {
-			dev_err(ctx->dev, "Request lib %s failed:%d\n",
+		if (linfo[i].fw == NULL) {
+			ret = request_firmware(&linfo[i].fw, linfo[i].name,
+						ctx->dev);
+			if (ret < 0) {
+				dev_err(ctx->dev, "Request lib %s failed:%d\n",
 					linfo[i].name, ret);
-			return ret;
+				goto load_library_failed;
+			}
 		}
 
 		if (skl->is_first_boot) {
-			ret = snd_skl_parse_uuids(ctx, fw,
+			ret = snd_skl_parse_uuids(ctx, linfo[i].fw,
 					BXT_ADSP_FW_BIN_HDR_OFFSET, i);
 			if (ret < 0)
 				goto load_library_failed;
 		}
 
-		stripped_fw.data = fw->data;
-		stripped_fw.size = fw->size;
+		stripped_fw.data = linfo[i].fw->data;
+		stripped_fw.size = linfo[i].fw->size;
 		skl_dsp_strip_extended_manifest(&stripped_fw);
 
 		stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40,
@@ -99,14 +113,12 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count)
 
 		ctx->dsp_ops.trigger(ctx->dev, false, stream_tag);
 		ctx->dsp_ops.cleanup(ctx->dev, &dmab, stream_tag);
-		release_firmware(fw);
-		fw = NULL;
 	}
 
 	return ret;
 
 load_library_failed:
-	release_firmware(fw);
+	sst_bxt_release_library(linfo, lib_count);
 	return ret;
 }
 
@@ -208,16 +220,14 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx)
 	struct skl_sst *skl = ctx->thread_context;
 	int ret;
 
-	ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev);
-	if (ret < 0) {
-		dev_err(ctx->dev, "Request firmware failed %d\n", ret);
-		goto sst_load_base_firmware_failed;
+	if (ctx->fw == NULL) {
+		ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev);
+		if (ret < 0) {
+			dev_err(ctx->dev, "Request firmware failed %d\n", ret);
+			return ret;
+		}
 	}
 
-	/* check for extended manifest */
-	if (ctx->fw == NULL)
-		goto sst_load_base_firmware_failed;
-
 	/* prase uuids on first boot */
 	if (skl->is_first_boot) {
 		ret = snd_skl_parse_uuids(ctx, ctx->fw, BXT_ADSP_FW_BIN_HDR_OFFSET, 0);
@@ -265,8 +275,11 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx)
 		}
 	}
 
+	return ret;
+
 sst_load_base_firmware_failed:
 	release_firmware(ctx->fw);
+	ctx->fw = NULL;
 	return ret;
 }
 
@@ -635,6 +648,10 @@ EXPORT_SYMBOL_GPL(bxt_sst_init_fw);
 
 void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx)
 {
+
+	sst_bxt_release_library(ctx->lib_info, ctx->lib_count);
+	if (ctx->dsp->fw)
+		release_firmware(ctx->dsp->fw);
 	skl_freeup_uuid_list(ctx);
 	skl_ipc_free(&ctx->ipc);
 	ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp);
Signature · 1 line
2.5.0
maintainer
#2 lore raw

Re: [PATCH v2 1/2] ASoC: Intel: bxtn: Store the FW/Library context at boot

Quoted 15 lines · On Thu, 2017-01-12 at 09:54 +0530, [email protected] wrote:

From: Jeeja KP <[email protected]>

Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory.

---
 sound/soc/intel/skylake/bxt-sst.c | 55 +++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 19 deletions(-)
sound/soc/intel/skylake/bxt-sst.c +0 -0
index 15a063a..7762d5a 100644

sound/soc/intel/skylake/bxt-sst.c static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) · line 57

Quoted 8 lines
sound/soc/intel/skylake/bxt-sst.c +5 -0
@@ -50,33 +50,47 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
 	 return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
 }
 
+static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count)
+{
+	int i;
+
+	for (i = 1; i < lib_count; i++) {

It probably makes sense to replace 1 with a macro here to indicate the first non base FW ID number. This can be done in other places too to make the code more readable for library management.

Liam

author
#3 lore raw

Re: [PATCH v2 1/2] ASoC: Intel: bxtn: Store the FW/Library context at boot

Quoted 19 lines · Liam Girdwood
Quoted 18 lines · On Thu, 2017-01-12 at 09:54 +0530, [email protected] wrote:

From: Jeeja KP <[email protected]>

Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory.

---
 sound/soc/intel/skylake/bxt-sst.c | 55 +++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 19 deletions(-)
sound/soc/intel/skylake/bxt-sst.c +0 -0
index 15a063a..7762d5a 100644
@@ -50,33 +50,47 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
 	 return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
 }
 
Quoted 10 lines

sound/soc/intel/skylake/bxt-sst.c static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) · line 57

Quoted 5 lines
sound/soc/intel/skylake/bxt-sst.c +5 -0
+static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count)
+{
+	int i;
+
+	for (i = 1; i < lib_count; i++) {

It probably makes sense to replace 1 with a macro here to indicate the first non base FW ID number. This can be done in other places too to make the code more readable for library management.

sure, will add a macro for the non base FW ID and will address this as a separate patch as this is used in other places as well.

Quoted 3 lines

Liam

#4 lore raw

PATCH v2 2/2 ASoC: Intel: bxtn: optimize ROM init retries

In reply to [email protected]

From: Jeeja KP <[email protected]>

During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device.

To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download.

---
 sound/soc/intel/skylake/bxt-sst.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
sound/soc/intel/skylake/bxt-sst.c +16 -11
index 7762d5a..d3be1be 100644
@@ -25,7 +25,8 @@
 #include "skl-sst-ipc.h"
 
 #define BXT_BASEFW_TIMEOUT	3000
-#define BXT_INIT_TIMEOUT	500
+#define BXT_INIT_TIMEOUT	300
+#define BXT_ROM_INIT_TIMEOUT	70
 #define BXT_IPC_PURGE_FW	0x01004000
 
 #define BXT_ROM_INIT		0x5
@@ -45,6 +46,8 @@
 /* Delay before scheduling D0i3 entry */
 #define BXT_D0I3_DELAY 5000
 
+#define BXT_FW_ROM_INIT_RETRY 3
+
 static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
 {
 	 return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
@@ -185,7 +188,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
 
 	/* Step 7: Wait for ROM init */
 	ret = sst_dsp_register_poll(ctx, BXT_ADSP_FW_STATUS, SKL_FW_STS_MASK,
-			SKL_FW_INIT, BXT_INIT_TIMEOUT, "ROM Load");
+			SKL_FW_INIT, BXT_ROM_INIT_TIMEOUT, "ROM Load");
 	if (ret < 0) {
 		dev_err(ctx->dev, "Timeout for ROM init, ret:%d\n", ret);
 		goto base_fw_load_failed;
@@ -218,7 +221,7 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx)
 {
 	struct firmware stripped_fw;
 	struct skl_sst *skl = ctx->thread_context;
-	int ret;
+	int ret, i;
 
 	if (ctx->fw == NULL) {
 		ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev);
@@ -239,18 +242,20 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx)
 	stripped_fw.size = ctx->fw->size;
 	skl_dsp_strip_extended_manifest(&stripped_fw);
 
-	ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size);
-	/* Retry Enabling core and ROM load. Retry seemed to help */
-	if (ret < 0) {
+
+	for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) {
 		ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size);
-		if (ret < 0) {
-			dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+		if (ret == 0)
+			break;
+	}
+
+	if (ret < 0) {
+		dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
 			sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
 			sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
 
-			dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret);
-			goto sst_load_base_firmware_failed;
-		}
+		dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret);
+		goto sst_load_base_firmware_failed;
 	}
 
 	ret = sst_transfer_fw_host_dma(ctx);
Signature · 1 line
2.5.0