Skip to contentSkip to conversation

patch "USB: serial: ch341: fix initial modem-control state" added to usb-linus

PATCH [email protected] 1 participant 1 message Jan 12, 2017

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

USB: serial: ch341: fix initial modem-control state

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

Quoted 1 line

From 4e2da44691cffbfffb1535f478d19bc2dca3e62b Mon Sep 17 00:00:00 2001

From: Johan Hovold <[email protected]>
Date: Fri, 6 Jan 2017 19:15:10 +0100
Subject: USB: serial: ch341: fix initial modem-control state

DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well.

Fixes 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc stable <[email protected]>
---
 drivers/usb/serial/ch341.c | 1 -
 1 file changed, 1 deletion(-)
drivers/usb/serial/ch341.c +0 -1
index 2597b83a8ae2..d133e72fe888 100644
@@ -258,7 +258,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&priv->lock);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(port->serial->dev, priv);
 	if (r < 0)
Signature · 1 line
2.11.0