Skip to contentSkip to conversation

patch "serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards" added to tty-testing

PATCH [email protected] 1 participant 1 message Feb 5, 2017

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-testing branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will be merged to the tty-next branch sometime soon, after it passes testing, and the merge window is open.

If you have any questions about this process, please let me know.

Quoted 1 line

From 9d1e1178adde83b273d8becfedecf7b4609025a6 Mon Sep 17 00:00:00 2001

From: Ian Abbott <[email protected]>
Date: Fri, 3 Feb 2017 20:25:00 +0000
Subject: serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards

The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000).

---
 drivers/tty/serial/8250/8250_pci.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/tty/serial/8250/8250_pci.c +13 -0
index 3eb638c35ba1..0b63109d8750 100644
@@ -2577,6 +2577,8 @@ enum pci_board_num_t {
 	pbn_b0_4_1152000_200,
 	pbn_b0_8_1152000_200,
 
+	pbn_b0_4_1250000,
+
 	pbn_b0_2_1843200,
 	pbn_b0_4_1843200,
 
@@ -2799,6 +2801,13 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 0x200,
 	},
 
+	[pbn_b0_4_1250000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1250000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b0_2_1843200] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 2,
@@ -5264,6 +5273,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
 	{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
 
+	/* MKS Tenta SCOM-080x serial cards */
+	{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
+	{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
Signature · 1 line
2.11.1