Regression: Line6 Toneport stops working on 4.10-rc5
A message that is not in the archive (sent off-list or not yet received): CAH7_RC8_i0id7YRqzW37qtq3B7BrWfwDU-fXmBADBx0Mej7vsw@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): CAH7_RC8NA5KJ=eB63fxXnUwk7kkgJAT=p6K29EncrYcgE-utTg@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAH7_RC9RmhF0eBf7phh_2NROL65_Rw=8Jd2Wf9TsURhkASOuMw@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAH7_RC8Ma6c+VHvQ8i0BHDmA_B5qdrPXNQkBAy2Z0MbCHumrnQ@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAH7_RC-Lvjyr8o8By27enPNzumigSRFbHEiLp4v+Qmg5if73Xg@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): CAH7_RC-Lvjyr8o8By27enPNzumigSRFbHEiLp4v+Qmg5if73Xg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 11 lines · Igor Zinovev
Hello again!
Thanks for the advice, but bisecting the whole tree took me quite a while and I ended up stuck because booting on some bisect states has led my system to run without some devices, like wireless and sound. So I tried to bisect the
sound/usb/line6path. It turns out that this commit is the point where it breaks for me:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/usb/line6?id=f6a0dd107ad0c8b59d1c9735eea4b8cb9f460949In fact, when I apply the reverse patch on top of 4.10-rc7, it fixes the problem for me.
Wonderful, thanks so much for tracking this down!
Quoted 2 lines
Should I bring some of the people that are mentioned in the commit into this conversation?
I've done so now. Andrej and Takashi, the above patch causes a regression for Igor, any thoughts? Should we just revert it?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 14 lines · Greg KH
Quoted 11 lines · Igor Zinovev
Hello again!
Thanks for the advice, but bisecting the whole tree took me quite a while and I ended up stuck because booting on some bisect states has led my system to run without some devices, like wireless and sound. So I tried to bisect the
sound/usb/line6path. It turns out that this commit is the point where it breaks for me:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/usb/line6?id=f6a0dd107ad0c8b59d1c9735eea4b8cb9f460949In fact, when I apply the reverse patch on top of 4.10-rc7, it fixes the problem for me.
Quoted 7 lines
Wonderful, thanks so much for tracking this down!
Quoted 2 lines
Should I bring some of the people that are mentioned in the commit into this conversation?
I've done so now. Andrej and Takashi, the above patch causes a regression for Igor, any thoughts? Should we just revert it?
Yeah, the patch looks wrong, the function line6_get_interval() should be called unconditionally.
I'm going to queue a revert for 4.10-final.
thanks,
Takashi
Quoted 21 lines · Takashi Iwai
Quoted 19 lines · Greg KH
Quoted 11 lines · Igor Zinovev
Hello again!
Thanks for the advice, but bisecting the whole tree took me quite a while and I ended up stuck because booting on some bisect states has led my system to run without some devices, like wireless and sound. So I tried to bisect the
sound/usb/line6path. It turns out that this commit is the point where it breaks for me:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/usb/line6?id=f6a0dd107ad0c8b59d1c9735eea4b8cb9f460949In fact, when I apply the reverse patch on top of 4.10-rc7, it fixes the problem for me.
Wonderful, thanks so much for tracking this down!
Quoted 2 lines
Should I bring some of the people that are mentioned in the commit into this conversation?
Quoted 8 lines
Quoted 2 lines
I've done so now. Andrej and Takashi, the above patch causes a regression for Igor, any thoughts? Should we just revert it?
Yeah, the patch looks wrong, the function
line6_get_interval()should be called unconditionally.I'm going to queue a revert for 4.10-final.
Yep, on the first look it's suspicious. I'll have a look on it in the evening - not sure simple revert is the ideal solution... I'll get back to you.
PS: Thanks for the bisecting, Igor!
PPS: Maybe this should go also to 4.9 stable, once resolved...
Signature · 3 lines
Greetings, Andrej
A message that is not in the archive (sent off-list or not yet received): CAFnc+wX6cNcsDp9Mmx2PrxBVj3+rjdtHgFtV4-qGvUVxqFMPjQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 29 lines · Andrej Kruták
Quoted 27 lines · Takashi Iwai
Quoted 14 lines · Greg KH
Quoted 11 lines · Igor Zinovev
Hello again!
Thanks for the advice, but bisecting the whole tree took me quite a while and I ended up stuck because booting on some bisect states has led my system to run without some devices, like wireless and sound. So I tried to bisect the
sound/usb/line6path. It turns out that this commit is the point where it breaks for me:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/usb/line6?id=f6a0dd107ad0c8b59d1c9735eea4b8cb9f460949In fact, when I apply the reverse patch on top of 4.10-rc7, it fixes the problem for me.
Quoted 7 lines
Wonderful, thanks so much for tracking this down!
Quoted 2 lines
Should I bring some of the people that are mentioned in the commit into this conversation?
I've done so now. Andrej and Takashi, the above patch causes a regression for Igor, any thoughts? Should we just revert it?
Yeah, the patch looks wrong, the function
line6_get_interval()should be called unconditionally.
Quoted 6 lines
Quoted 2 lines
I'm going to queue a revert for 4.10-final.
Yep, on the first look it's suspicious. I'll have a look on it in the evening - not sure simple revert is the ideal solution... I'll get back to you.
I guess in this case the revert is the best option.
But I'll postpone it until tomorrow. If you find a better solution, please let me know.
Quoted 2 lines
PS: Thanks for the bisecting, Igor!
PPS: Maybe this should go also to 4.9 stable, once resolved...
Yes, definitely.
thanks,
Takashi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/1 ALSA: line6: Always setup isochronous transfer properties
While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'.
This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely.
--- sound/usb/line6/driver.c | 49 ++++++++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 22 deletions(-)
sound/usb/line6/driver.c +27 -22
@@ -492,42 +492,46 @@ static void line6_destruct(struct snd_card *card)usb_put_dev (usbdev); } -/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval (struct usb_line6 *line6) +static void line6_get_usb_properties (struct usb_line6 *line6) {struct usb_device *usbdev = line6->usbdev;const struct line6_properties *properties = line6->properties;int pipe; -struct usb_host_endpoint *ep; +struct usb_host_endpoint *ep =NULL ; -if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { - pipe = -usb_rcvintpipe (line6->usbdev, line6->properties->ep_ctrl_r); - }else { - pipe = -usb_rcvbulkpipe (line6->usbdev, line6->properties->ep_ctrl_r); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { + pipe =usb_rcvintpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + }else { + pipe =usb_rcvbulkpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + } + ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; } - ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; +/* Control data transfer properties */ if (ep) { line6->interval = ep->desc.bInterval; -if (usbdev->speed ==USB_SPEED_LOW ) { - line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_LOW_ISO_BUFFERS ; - }else { - line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; - } - line6->max_packet_size =le16_to_cpu (ep->desc.wMaxPacketSize); }else { -dev_err (line6->ifcdev, -"endpoint not available, using fallback values" ); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +dev_err (line6->ifcdev, +"endpoint not available, using fallback values" ); + } line6->interval =LINE6_FALLBACK_INTERVAL ; line6->max_packet_size =LINE6_FALLBACK_MAXPACKETSIZE ; } -} +/* Isochronous transfer properties */ +if (usbdev->speed ==USB_SPEED_LOW ) { + line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_LOW_ISO_BUFFERS ; + }else { + line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; + } +}/* Enable buffering of incoming messages, flush the buffer */ static int line6_hwdep_open (struct snd_hwdep *hw,struct file *file)
@@ -754,8 +758,9 @@ int line6_probe(struct usb_interface *interface, goto error; } +line6_get_usb_properties (line6); +if (properties->capabilities &LINE6_CAP_CONTROL ) { -line6_get_interval (line6); ret =line6_init_cap_control (line6);if (ret <0 ) goto error;
Signature · 1 line
2.7.4
Re: [PATCH] ALSA: line6: Always setup isochronous transfer properties
Quoted 8 lines · Andrej Krutak
While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'.
This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely.
Signed-off-by Andrej Krutak <[email protected]>
Well, this looks too complex and vague as a regression fix. If it were 4.10-rc1, I could take it. But now it's already rc7 and the next might be final, so I prefer a shorter and easier solution.
That said, we can revert the commit as a clear fix at first for 4.10 (with Cc to stable), then take this on top as an enhancement for 4.11.
Still it's important to know whether this works on Igor's system, so Igor, please give this one try.
thanks,
Takashi
Quoted 90 lines
--- sound/usb/line6/driver.c | 49 ++++++++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 22 deletions(-)sound/usb/line6/driver.c +27
-22@@ -492,42 +492,46 @@ static void line6_destruct(struct snd_card *card)usb_put_dev (usbdev); } -/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval (struct usb_line6 *line6) +static void line6_get_usb_properties (struct usb_line6 *line6) {struct usb_device *usbdev = line6->usbdev;const struct line6_properties *properties = line6->properties;int pipe; -struct usb_host_endpoint *ep; +struct usb_host_endpoint *ep =NULL ; -if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { - pipe = -usb_rcvintpipe (line6->usbdev, line6->properties->ep_ctrl_r); - }else { - pipe = -usb_rcvbulkpipe (line6->usbdev, line6->properties->ep_ctrl_r); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { + pipe =usb_rcvintpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + }else { + pipe =usb_rcvbulkpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + } + ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; } - ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; +/* Control data transfer properties */ if (ep) { line6->interval = ep->desc.bInterval; -if (usbdev->speed ==USB_SPEED_LOW ) { - line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_LOW_ISO_BUFFERS ; - }else { - line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; - } - line6->max_packet_size =le16_to_cpu (ep->desc.wMaxPacketSize); }else { -dev_err (line6->ifcdev, -"endpoint not available, using fallback values" ); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +dev_err (line6->ifcdev, +"endpoint not available, using fallback values" ); + } line6->interval =LINE6_FALLBACK_INTERVAL ; line6->max_packet_size =LINE6_FALLBACK_MAXPACKETSIZE ; } -} +/* Isochronous transfer properties */ +if (usbdev->speed ==USB_SPEED_LOW ) { + line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_LOW_ISO_BUFFERS ; + }else { + line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; + } +}/* Enable buffering of incoming messages, flush the buffer */ static int line6_hwdep_open (struct snd_hwdep *hw,struct file *file)@@ -754,8 +758,9 @@ int line6_probe(struct usb_interface *interface, goto error; } +line6_get_usb_properties (line6); +if (properties->capabilities &LINE6_CAP_CONTROL ) { -line6_get_interval (line6); ret =line6_init_cap_control (line6);if (ret <0 ) goto error;Signature · 1 line
2.7.4
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH] ALSA: line6: Always setup isochronous transfer properties
Quoted 6 lines · Takashi Iwai
Quoted 4 lines · Andrej Krutak
While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'.
Quoted 9 lines
Quoted 4 lines
This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely.
Signed-off-by Andrej Krutak <dev-/tK0A0Qp8GRaa/[email protected]>Well, this looks too complex and vague as a regression fix. If it were 4.10-rc1, I could take it. But now it's already rc7 and the next might be final, so I prefer a shorter and easier solution.
In the end, the patch is just "careful", so that the endpoint structures are not read if the devices is not "marked" as having them.
Quoted 7 lines
That said, we can revert the commit as a clear fix at first for 4.10 (with Cc to stable), then take this on top as an enhancement for 4.11.
Still it's important to know whether this works on Igor's system, so Igor, please give this one try.
Thanks to zero-init of toneport_properties_table, the proposed simple revert should be enough for toneport, and shouldn't break other devices (perhaps HD300-HD500 may start showing the dev_err from line6_get_interval()).
So do as you like - e.g. simple revert for 4.10 and apply this patch for 4.11. But I don't mind if you won't.... :-)
Signature · 1 line
Andrej
Quoted 81 lines
Quoted 81 lines
--- sound/usb/line6/driver.c | 49 ++++++++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 22 deletions(-)sound/usb/line6/driver.c +25
-21@@ -492,42 +492,46 @@ static void line6_destruct(struct snd_card *card)usb_put_dev (usbdev); } -/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval (struct usb_line6 *line6) +static void line6_get_usb_properties (struct usb_line6 *line6) {struct usb_device *usbdev = line6->usbdev;const struct line6_properties *properties = line6->properties;int pipe; -struct usb_host_endpoint *ep; +struct usb_host_endpoint *ep =NULL ; -if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { - pipe = -usb_rcvintpipe (line6->usbdev, line6->properties->ep_ctrl_r); - }else { - pipe = -usb_rcvbulkpipe (line6->usbdev, line6->properties->ep_ctrl_r); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +if (properties->capabilities &LINE6_CAP_CONTROL_MIDI ) { + pipe =usb_rcvintpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + }else { + pipe =usb_rcvbulkpipe (line6->usbdev, + line6->properties->ep_ctrl_r); + } + ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; } - ep = usbdev->ep_in[usb_pipeendpoint (pipe)]; +/* Control data transfer properties */ if (ep) { line6->interval = ep->desc.bInterval; -if (usbdev->speed ==USB_SPEED_LOW ) { - line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_LOW_ISO_BUFFERS ; - }else { - line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; - line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; - } - line6->max_packet_size =le16_to_cpu (ep->desc.wMaxPacketSize); }else { -dev_err (line6->ifcdev, -"endpoint not available, using fallback values" ); +if (properties->capabilities &LINE6_CAP_CONTROL ) { +dev_err (line6->ifcdev, +"endpoint not available, using fallback values" ); + } line6->interval =LINE6_FALLBACK_INTERVAL ; line6->max_packet_size =LINE6_FALLBACK_MAXPACKETSIZE ; } -} +/* Isochronous transfer properties */ +if (usbdev->speed ==USB_SPEED_LOW ) { + line6->intervals_per_second =USB_LOW_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_LOW_ISO_BUFFERS ; + }else { + line6->intervals_per_second =USB_HIGH_INTERVALS_PER_SECOND ; + line6->iso_buffers =USB_HIGH_ISO_BUFFERS ; + } +}/* Enable buffering of incoming messages, flush the buffer */ static int line6_hwdep_open (struct snd_hwdep *hw,struct file *file)@@ -754,8 +758,9 @@ int line6_probe(struct usb_interface *interface, goto error; }
Quoted 10 lines
Quoted 10 lines
sound/usb/line6/driver.c +2
-2+line6_get_usb_properties (line6); +if (properties->capabilities &LINE6_CAP_CONTROL ) { -line6_get_interval (line6); ret =line6_init_cap_control (line6);if (ret <0 ) goto error; --2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] ALSA: line6: Always setup isochronous transfer properties
Quoted 13 lines · Andrej Kruták
Quoted 11 lines · Takashi Iwai
Quoted 8 lines · Andrej Krutak
While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'.
This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely.
Signed-off-by Andrej Krutak <[email protected]>
Quoted 7 lines
Quoted 4 lines
Well, this looks too complex and vague as a regression fix. If it were 4.10-rc1, I could take it. But now it's already rc7 and the next might be final, so I prefer a shorter and easier solution.
In the end, the patch is just "careful", so that the endpoint structures are not read if the devices is not "marked" as having them.
Yes, but it's still not very clear what actually "fixes".
Quoted 8 lines
Quoted 7 lines
That said, we can revert the commit as a clear fix at first for 4.10 (with Cc to stable), then take this on top as an enhancement for 4.11.
Still it's important to know whether this works on Igor's system, so Igor, please give this one try.
Quoted 7 lines
Thanks to zero-init of
toneport_properties_table, the proposed simple revert should be enough for toneport, and shouldn't break other devices (perhaps HD300-HD500 may start showing thedev_errfromline6_get_interval()).So do as you like - e.g. simple revert for 4.10 and apply this patch for 4.11. But I don't mind if you won't.... :-)
Yes, I now queued the revert patch to for-linus branch, and yours to for-next branch on top of it.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel