ARM: dts: BCM5301X: bugfixes
cover ARM: dts: BCM5301X: bugfixes
Bug fixes to get bcm953012k working again
Jon Mason (2):
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
ARM: dts: BCM5301X: Fix memory start address
arch/arm/boot/dts/bcm953012k.dts | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/2 ARM: dts: BCM5301X: Fix UARTs on bcm953012k
The UARTs are outputting garbage on the console. This is due to a speed issue. We can simply use the clock speed (which is now defined in the DTSI file) and everything works fine.
Signed-off-by Jon Mason <[email protected]>
Fixes cdc36b22 ("ARM: dts: enable clock support for BCM5301X")
--- arch/arm/boot/dts/bcm953012k.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/boot/dts/bcm953012k.dts +1 -2
@@ -53,10 +53,9 @@ }; &uart0 { - clock-frequency = <62499840>; + status = "okay"; }; &uart1 { - clock-frequency = <62499840>; status = "okay"; };
Signature · 1 line
2.7.4
PATCH 2/2 ARM: dts: BCM5301X: Fix memory start address
In reply to Jon MasonMemory starts at 0x80000000, not 0. 0 "works" due to mirrior of the first 128M of RAM to that address. Anything greater than 128M will quickly find nothing there. Correcting the starting address has everything working again.
Signed-off-by Jon Mason <[email protected]>
Fixes 7eb05f6d ("ARM: dts: bcm5301x: Add BCM SVK DT files")
--- arch/arm/boot/dts/bcm953012k.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/bcm953012k.dts +1 -1
@@ -48,7 +48,7 @@ }; memory { - reg = <0x00000000 0x10000000>; + reg = <0x80000000 0x10000000>; }; };
Signature · 1 line
2.7.4