SPL: Add support to boot a partition type

the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found.

Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image

Signed-off-by Dalon Westergreen <[email protected]>

Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig.

Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated.

Signed-off-by Dalon Westergreen <[email protected]>

This adds support for the spl to seach for and boot from an arbitrary partition type rather then a specific partition number. When USE_PARTITION_TYPE is enabled, spl will search for the partition type but fallback to the specified partition number.

SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION is moved to a Kconfig and header and defconfigs for the affected boards are updated.

Changes in v9:
- Missed moving use partition type to socfpga/Kconfig
Changes in v8:
-> Move partition type default to arch/arm/mach-socfpga/Kconfig
Changes in v7:
-> set part type to 0xa2 only if socfpga selected and merge previously split
patch
Changes in V6:
-> Fix unneeded backslash
-> Move SPL socfpga Kconfig default to selec tin arch/arm/Kconfig -> Split out defconfig changes for affected boards into a separate patch

Dalon Westergreen (2):
SPL: add support to boot from a partition type
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig

 arch/arm/Kconfig                 |  1 +
 common/spl/Kconfig               | 32 ++++++++++++++++++++++++++++++++
 common/spl/spl_mmc.c             | 27 ++++++++++++++++++---------
 configs/db-88f6820-gp_defconfig  |  1 +
 configs/kc1_defconfig            |  2 ++
 configs/sniper_defconfig         |  2 ++
 disk/part_dos.c                  |  1 +
 include/configs/db-88f6820-gp.h  |  1 -
 include/configs/kc1.h            |  2 --
 include/configs/sniper.h         |  2 --
 include/configs/socfpga_common.h |  2 --
 include/part.h                   |  3 +++
 12 files changed, 60 insertions(+), 16 deletions(-)

Quoted 38 lines · Dalon Westergreen

This adds support for the spl to seach for and boot from an arbitrary partition type rather then a specific partition number.??When USE_PARTITION_TYPE is enabled, spl will search for the partition type but fallback to the specified partition number.
?
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION is moved to a Kconfig and header and defconfigs for the affected boards are updated.

Changes in v9:
?- Missed moving use partition type to socfpga/Kconfig Changes in v8:
?-> Move partition type default to arch/arm/mach-socfpga/Kconfig Changes in v7:
?-> set part type to 0xa2 only if socfpga selected and merge previously split
????patch
Changes in V6:
?-> Fix unneeded backslash
?-> Move SPL socfpga Kconfig default to selec tin arch/arm/Kconfig ?-> Split out defconfig changes for affected boards into a separate patch

Dalon Westergreen (2):
? SPL: add support to boot from a partition type ? SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig

?arch/arm/Kconfig?????????????????|??1 +
?common/spl/Kconfig???????????????| 32 ++++++++++++++++++++++++++++++++
?common/spl/spl_mmc.c?????????????| 27 ++++++++++++++++++---------
?configs/db-88f6820-gp_defconfig??|??1 +
?configs/kc1_defconfig????????????|??2 ++
?configs/sniper_defconfig?????????|??2 ++
?disk/part_dos.c??????????????????|??1 +
?include/configs/db-88f6820-gp.h??|??1 -
?include/configs/kc1.h????????????|??2 --
?include/configs/sniper.h?????????|??2 --
?include/configs/socfpga_common.h |??2 --
?include/part.h???????????????????|??3 +++

Quoted 2 lines

?12 files changed, 60 insertions(+), 16 deletions(-)

Series

Acked-by Marek Vasut <[email protected]>

Quoted 42 lines · Marek Vasut

Quoted 40 lines · Dalon Westergreen

This adds support for the spl to seach for and boot from an arbitrary partition type rather then a specific partition number.??When USE_PARTITION_TYPE is enabled, spl will search for the partition type but fallback to the specified partition number.
?
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION is moved to a Kconfig and header and defconfigs for the affected boards are updated.

Changes in v9:
?- Missed moving use partition type to socfpga/Kconfig Changes in v8:
?-> Move partition type default to arch/arm/mach-socfpga/Kconfig Changes in v7:
?-> set part type to 0xa2 only if socfpga selected and merge previously split
????patch
Changes in V6:
?-> Fix unneeded backslash
?-> Move SPL socfpga Kconfig default to selec tin arch/arm/Kconfig ?-> Split out defconfig changes for affected boards into a separate patch

Dalon Westergreen (2):
? SPL: add support to boot from a partition type ? SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig

?arch/arm/Kconfig?????????????????|??1 +
?common/spl/Kconfig???????????????| 32 ++++++++++++++++++++++++++++++++
?common/spl/spl_mmc.c?????????????| 27 ++++++++++++++++++---------
?configs/db-88f6820-gp_defconfig??|??1 +
?configs/kc1_defconfig????????????|??2 ++
?configs/sniper_defconfig?????????|??2 ++
?disk/part_dos.c??????????????????|??1 +
?include/configs/db-88f6820-gp.h??|??1 -
?include/configs/kc1.h????????????|??2 --
?include/configs/sniper.h?????????|??2 --
?include/configs/socfpga_common.h |??2 --
?include/part.h???????????????????|??3 +++

?12 files changed, 60 insertions(+), 16 deletions(-)

Quoted 2 lines

Series

Acked-by Marek Vasut <[email protected]>

Thanks. ?I am still not 100% sure on the etiquette at this point. ?Is any further action required on my parT?