OPAL patches
Subsystems (2)
v3 cover OPAL patches
Just a couple of fixes for sed-opal to prevent faulty firmware from allowing us to go off in the weeds, and a helper to remove some duplicate code.
v2->v3:
corrected the bad calculation on the response parser check and changed it to only check the subpacket length
v1->v2:
left tok->len as a size_t
got everyone important on the same email thread
Jon Derrick (4):
block/sed: Use ssize_t on atom parsers to return errors block/sed: Add helper to qualify response tokens block/sed: Check received header lengths
MAINTAINERS: Remove powerpc's opal match
MAINTAINERS | 1 - block/sed-opal.c | 124 +++++++++++++++++++++++++++---------------------------- 2 files changed, 60 insertions(+), 65 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v3 1/4 block/sed: Use ssize_t on atom parsers to return errors
The short atom parser can return an errno from decoding but does not currently return the error as a signed value. Convert all of the parsers to ssize_t.
--- block/sed-opal.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
block/sed-opal.c +14 -14
@@ -635,8 +635,8 @@ static enum opal_token response_get_token(const struct parsed_resp *resp,return tok->pos[0 ]; } -static size_t response_parse_tiny (struct opal_resp_tok *tok, -const u8 *pos) +static ssize_t response_parse_tiny (struct opal_resp_tok *tok, +const u8 *pos) { tok->pos = pos; tok->len =1 ;
@@ -652,8 +652,8 @@ static size_t response_parse_tiny(struct opal_resp_tok *tok,return tok->len; } -static size_t response_parse_short (struct opal_resp_tok *tok, -const u8 *pos) +static ssize_t response_parse_short (struct opal_resp_tok *tok, +const u8 *pos) { tok->pos = pos; tok->len = (pos[0 ] &SHORT_ATOM_LEN_MASK ) +1 ;
@@ -665,7 +665,7 @@ static size_t response_parse_short(struct opal_resp_tok *tok, tok->type =OPAL_DTA_TOKENID_SINT ; }else {u64 u_integer =0 ; -int i, b =0 ; +ssize_t i, b =0 ; tok->type =OPAL_DTA_TOKENID_UINT ;if (tok->len >9 ) {
@@ -682,8 +682,8 @@ static size_t response_parse_short(struct opal_resp_tok *tok,return tok->len; } -static size_t response_parse_medium (struct opal_resp_tok *tok, -const u8 *pos) +static ssize_t response_parse_medium (struct opal_resp_tok *tok, +const u8 *pos) { tok->pos = pos; tok->len = (((pos[0 ] &MEDIUM_ATOM_LEN_MASK ) <<8 ) | pos[1 ]) +2 ;
@@ -699,8 +699,8 @@ static size_t response_parse_medium(struct opal_resp_tok *tok,return tok->len; } -static size_t response_parse_long (struct opal_resp_tok *tok, -const u8 *pos) +static ssize_t response_parse_long (struct opal_resp_tok *tok, +const u8 *pos) { tok->pos = pos; tok->len = ((pos[1 ] <<16 ) | (pos[2 ] <<8 ) | pos[3 ]) +4 ;
@@ -716,8 +716,8 @@ static size_t response_parse_long(struct opal_resp_tok *tok,return tok->len; } -static size_t response_parse_token (struct opal_resp_tok *tok, -const u8 *pos) +static ssize_t response_parse_token (struct opal_resp_tok *tok, +const u8 *pos) { tok->pos = pos; tok->len =1 ;
@@ -734,7 +734,7 @@ static int response_parse(const u8 *buf, size_t length,struct opal_resp_tok *iter;int num_entries =0 ;int total; -size_t token_length; +ssize_t token_length;const u8 *pos;if (!buf)
@@ -780,8 +780,8 @@ static int response_parse(const u8 *buf, size_t length,else /* TOKEN */ token_length =response_parse_token (iter, pos); -if (token_length == -EINVAL ) -return -EINVAL ; +if (token_length <0 ) +return token_length; pos += token_length; total -= token_length;
Signature · 1 line
1.8.3.1
Re: [PATCHv3 1/4] block/sed: Use ssize_t on atom parsers to return errors
Quoted 5 lines · Jon Derrick
The short atom parser can return an errno from decoding but does not currently return the error as a signed value. Convert all of the parsers to
ssize_t.Signed-off-by Jon Derrick <[email protected]>
PATCH v3 2/4 block/sed: Add helper to qualify response tokens
In reply to Jon DerrickAdd helper which verifies the response token is valid and matches the expected value. Merges token_type and response_get_token.
--- block/sed-opal.c | 61 +++++++++++++++++++++++--------------------------------- 1 file changed, 25 insertions(+), 36 deletions(-)
block/sed-opal.c +25 -36
@@ -591,48 +591,25 @@ static int cmd_finalize(struct opal_dev *cmd, u32 hsn, u32 tsn)return 0 ; } -static enum opal_response_token token_type (const struct parsed_resp *resp, -int n) +static const struct opal_resp_tok *response_get_token ( +const struct parsed_resp *resp, +int n) {const struct opal_resp_tok *tok;if (n >= resp->num) {pr_err ("Token number doesn't exist: %d, resp: %d\n" , n, resp->num); -return OPAL_DTA_TOKENID_INVALID ; +return ERR_PTR (-EINVAL ); } tok = &resp->toks[n];if (tok->len ==0 ) {pr_err ("Token length must be non-zero\n" ); -return OPAL_DTA_TOKENID_INVALID ; +return ERR_PTR (-EINVAL ); } -return tok->type; -} - -/* -* This function returns 0 in case of invalid token. One should call -* token_type() first to find out if the token is valid or not. -*/ -static enum opal_token response_get_token (const struct parsed_resp *resp, -int n) -{ -const struct opal_resp_tok *tok; - -if (n >= resp->num) { -pr_err ("Token number doesn't exist: %d, resp: %d\n" , - n, resp->num); -return 0 ; - } - - tok = &resp->toks[n]; -if (tok->len ==0 ) { -pr_err ("Token length must be non-zero\n" ); -return 0 ; - } - -return tok->pos[0 ]; +return tok; } static ssize_t response_parse_tiny(struct opal_resp_tok *tok,
@@ -851,20 +828,32 @@ static u64 response_get_u64(const struct parsed_resp *resp, int n)return resp->toks[n].stored.u; } +static bool response_token_matches (const struct opal_resp_tok *token,u8 match) +{ +if (IS_ERR_OR_NULL (token) || + token->type !=OPAL_DTA_TOKENID_TOKEN || + token->pos[0 ] != match) +return false; +return true; +} +static u8 response_status (const struct parsed_resp *resp) { -if (token_type (resp,0 ) ==OPAL_DTA_TOKENID_TOKEN && -response_get_token (resp,0 ) ==OPAL_ENDOFSESSION ) { +const struct opal_resp_tok *tok; + + tok =response_get_token (resp,0 ); +if (response_token_matches (tok,OPAL_ENDOFSESSION ))return 0 ; - }if (resp->num <5 )return DTAERROR_NO_METHOD_STATUS ; -if (token_type (resp, resp->num -1 ) !=OPAL_DTA_TOKENID_TOKEN || -token_type (resp, resp->num -5 ) !=OPAL_DTA_TOKENID_TOKEN || -response_get_token (resp, resp->num -1 ) !=OPAL_ENDLIST || -response_get_token (resp, resp->num -5 ) !=OPAL_STARTLIST ) + tok =response_get_token (resp, resp->num -5 ); +if (!response_token_matches (tok,OPAL_STARTLIST )) +return DTAERROR_NO_METHOD_STATUS ; + + tok =response_get_token (resp, resp->num -1 ); +if (!response_token_matches (tok,OPAL_ENDLIST ))return DTAERROR_NO_METHOD_STATUS ;return response_get_u64 (resp, resp->num -4 );
Signature · 1 line
1.8.3.1
Re: [PATCHv3 2/4] block/sed: Add helper to qualify response tokens
Quoted 70 lines · Jon Derrick
Add helper which verifies the response token is valid and matches the expected value. Merges
token_typeandresponse_get_token.Signed-off-by Jon Derrick <[email protected]>--- block/sed-opal.c | 61 +++++++++++++++++++++++--------------------------------- 1 file changed, 25 insertions(+), 36 deletions(-)block/sed-opal.c +6
-29@@ -591,48 +591,25 @@ static int cmd_finalize(struct opal_dev *cmd, u32 hsn, u32 tsn)return 0 ; } -static enum opal_response_token token_type (const struct parsed_resp *resp, -int n) +static const struct opal_resp_tok *response_get_token ( +const struct parsed_resp *resp, +int n) {const struct opal_resp_tok *tok;if (n >= resp->num) {pr_err ("Token number doesn't exist: %d, resp: %d\n" , n, resp->num); -return OPAL_DTA_TOKENID_INVALID ; +return ERR_PTR (-EINVAL ); } tok = &resp->toks[n];if (tok->len ==0 ) {pr_err ("Token length must be non-zero\n" ); -return OPAL_DTA_TOKENID_INVALID ; +return ERR_PTR (-EINVAL ); } -return tok->type; -} - -/* -* This function returns 0 in case of invalid token. One should call -* token_type() first to find out if the token is valid or not. -*/ -static enum opal_token response_get_token (const struct parsed_resp *resp, -int n) -{ -const struct opal_resp_tok *tok; - -if (n >= resp->num) { -pr_err ("Token number doesn't exist: %d, resp: %d\n" , - n, resp->num); -return 0 ; - } - - tok = &resp->toks[n]; -if (tok->len ==0 ) { -pr_err ("Token length must be non-zero\n" ); -return 0 ; - } - -return tok->pos[0 ]; +return tok; } static ssize_t response_parse_tiny(struct opal_resp_tok *tok,@@ -851,20 +828,32 @@ static u64 response_get_u64(const struct parsed_resp *resp, int n)return resp->toks[n].stored.u; }
block/sed-opal.c static u64 response_get_u64(const struct parsed_resp *resp, int n) · line 839
Quoted 10 lines
block/sed-opal.c +9
-0+static bool response_token_matches (const struct opal_resp_tok *token,u8 match) +{ +if (IS_ERR_OR_NULL (token) || + token->type !=OPAL_DTA_TOKENID_TOKEN || + token->pos[0 ] != match) +return false; +return true; +} +
This is sorta pedantic but from my reading of the code token can never be null. It will either be a valid pointer or ERR_PTR(-EINVAL), but never null.
So maybe change this to IS_ERR(token) etc. Other than that little nit:
PATCH v3 3/4 block/sed: Check received header lengths
In reply to Jon DerrickAdd a buffer size check against discovery and response header lengths before we loop over their buffers.
--- block/sed-opal.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-)
block/sed-opal.c +21 -14
@@ -340,10 +340,17 @@ static int opal_discovery0_end(struct opal_dev *dev)const struct d0_header *hdr = (struct d0_header *)dev->resp;const u8 *epos = dev->resp, *cpos = dev->resp;u16 comid =0 ; +u32 hlen =be32_to_cpu (hdr->length); -print_buffer (dev->resp,be32_to_cpu (hdr->length)); +print_buffer (dev->resp, hlen); - epos +=be32_to_cpu (hdr->length);/* end of buffer */ +if (hlen >IO_BUFFER_LENGTH -sizeof (*hdr)) { +pr_warn ("Discovery length overflows buffer (%zu+%u)/%u\n" , +sizeof (*hdr), hlen,IO_BUFFER_LENGTH ); +return -EFAULT ; + } + + epos += hlen;/* end of buffer */ cpos +=sizeof (*hdr);/* current position on buffer */ while (cpos < epos && supported) {
@@ -713,6 +720,7 @@ static int response_parse(const u8 *buf, size_t length,int total;ssize_t token_length;const u8 *pos; +u32 clen, plen, slen;if (!buf)return -EFAULT ;
@@ -724,17 +732,16 @@ static int response_parse(const u8 *buf, size_t length, pos = buf; pos +=sizeof (*hdr); -pr_debug ("Response size: cp: %d, pkt: %d, subpkt: %d\n" , -be32_to_cpu (hdr->cp.length), -be32_to_cpu (hdr->pkt.length), -be32_to_cpu (hdr->subpkt.length)); - -if (hdr->cp.length ==0 || hdr->pkt.length ==0 || - hdr->subpkt.length ==0 ) { -pr_err ("Bad header length. cp: %d, pkt: %d, subpkt: %d\n" , -be32_to_cpu (hdr->cp.length), -be32_to_cpu (hdr->pkt.length), -be32_to_cpu (hdr->subpkt.length)); + clen =be32_to_cpu (hdr->cp.length); + plen =be32_to_cpu (hdr->pkt.length); + slen =be32_to_cpu (hdr->subpkt.length); +pr_debug ("Response size: cp: %u, pkt: %u, subpkt: %u\n" , + clen, plen, slen); + +if (clen ==0 || plen ==0 || slen ==0 || + slen >IO_BUFFER_LENGTH -sizeof (*hdr)) { +pr_err ("Bad header length. cp: %u, pkt: %u, subpkt: %u\n" , + clen, plen, slen);print_buffer (pos,sizeof (*hdr));return -EINVAL ; }
@@ -743,7 +750,7 @@ static int response_parse(const u8 *buf, size_t length,return -EFAULT ; iter = resp->toks; - total =be32_to_cpu (hdr->subpkt.length); + total = slen;print_buffer (pos, total);while (total >0 ) {if (pos[0 ] <=TINY_ATOM_BYTE )/* tiny atom */
Signature · 1 line
1.8.3.1
Re: [PATCHv3 3/4] block/sed: Check received header lengths
Quoted 4 lines · Jon Derrick
Add a buffer size check against discovery and response header lengths before we loop over their buffers.
Signed-off-by Jon Derrick <[email protected]>
PATCH v3 4/4 MAINTAINERS: Remove powerpc's opal match
In reply to Jon DerrickPPC's 'opal' match pattern also matches block/sed-opal.c, where it looks like the 'arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.
--- MAINTAINERS | 1 - 1 file changed, 1 deletion(-)
MAINTAINERS +0 -1
@@ -7404,7 +7404,6 @@ F: drivers/pci/hotplug/pnv_php.c F: drivers/pci/hotplug/rpa* F: drivers/scsi/ibmvscsi/ F: tools/testing/selftests/powerpc -N: opal N: /pmac N: powermac N: powernv
Signature · 1 line
1.8.3.1
Re: [PATCHv3 4/4] MAINTAINERS: Remove powerpc's opal match
Quoted 3 lines · Jon Derrick
PPC's 'opal' match pattern also matches
block/sed-opal.c, where it looks like the 'arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.
This patch will end up missing some code, what about this instead:
Remove OPAL regex in powerpc to avoid false match
--- MAINTAINERS | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
MAINTAINERS +7 -1
@@ -7393,18 +7393,24 @@ L: [email protected] Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git S: Supported +F: Documentation/ABI/stable/sysfs-firmware-opal-* +F: Documentation/devicetree/bindings/powerpc/opal/ +F: Documentation/devicetree/bindings/rtc/rtc-opal.txt +F: Documentation/devicetree/bindings/i2c/i2c-opal.txt F: Documentation/powerpc/ F: arch/powerpc/ F: drivers/char/tpm/tpm_ibmvtpm* F: drivers/crypto/nx/ F: drivers/crypto/vmx/ +F: drivers/i2c/busses/ic2-opal.c F: drivers/net/ethernet/ibm/ibmveth.* F: drivers/net/ethernet/ibm/ibmvnic.* F: drivers/pci/hotplug/pnv_php.c F: drivers/pci/hotplug/rpa* +F: drivers/rtc/rtc-opal.c F: drivers/scsi/ibmvscsi/ +F: drivers/tty/hvc/hvc_opal.c F: tools/testing/selftests/powerpc -N: opal N: /pmac N: powermac N: powernv
Signature · 2 lines
Stewart Smith OPAL Architect, IBM.
Andrew Donnellan
Reviewed-byRe: [PATCHv3 4/4] MAINTAINERS: Remove powerpc's opal match
Quoted 11 lines · Stewart Smith
Quoted 3 lines · Jon Derrick
PPC's 'opal' match pattern also matches
block/sed-opal.c, where it looks like the 'arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.This patch will end up missing some code, what about this instead:
Remove OPAL regex in powerpc to avoid false match
Signed-off-by Stewart Smith <[email protected]>
Per my reply to v4 of this series, your list matches mine. With the one typo correction below:
Quoted 13 lines
--- MAINTAINERS | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)MAINTAINERS +0
-0@@ -7393,18 +7393,24 @@ L: [email protected] Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git S: Supported
MAINTAINERS L: [email protected] · line 7405
Quoted 10 lines
MAINTAINERS +5
-0+F: Documentation/ABI/stable/sysfs-firmware-opal-* +F: Documentation/devicetree/bindings/powerpc/opal/ +F: Documentation/devicetree/bindings/rtc/rtc-opal.txt +F: Documentation/devicetree/bindings/i2c/i2c-opal.txt F: Documentation/powerpc/ F: arch/powerpc/ F: drivers/char/tpm/tpm_ibmvtpm* F: drivers/crypto/nx/ F: drivers/crypto/vmx/ +F: drivers/i2c/busses/ic2-opal.c
i2c-opal
Quoted 14 lines
MAINTAINERS +2
-1F: drivers/net/ethernet/ibm/ibmveth.* F: drivers/net/ethernet/ibm/ibmvnic.* F: drivers/pci/hotplug/pnv_php.c F: drivers/pci/hotplug/rpa* +F: drivers/rtc/rtc-opal.c F: drivers/scsi/ibmvscsi/ +F: drivers/tty/hvc/hvc_opal.c F: tools/testing/selftests/powerpc -N: opal N: /pmac N: powermac N: powernv
Signature · 2 lines
Andrew Donnellan OzLabs, ADL Canberra [email protected] IBM Australia Limited
Michael Ellerman
AppliedRe: [PATCHv3,4/4] MAINTAINERS: Remove powerpc's opal match
In reply to Stewart SmithQuoted 4 lines · Stewart Smith
Remove OPAL regex in powerpc to avoid false match
Signed-off-by Stewart Smith <[email protected]>Reviewed-by Andrew Donnellan <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/a42715830d552d7c0e3be709383ece
cheers
Re: [PATCHv3 4/4] MAINTAINERS: Remove powerpc's opal match
In reply to Jon DerrickQuoted 3 lines · Jon Derrick
PPC's 'opal' match pattern also matches
block/sed-opal.c, where it looks like the 'arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.
We thought of it first.
Can't you just rename your driver, Opal Storage Specification, so "oss", that should be pretty unique?
... :)
I don't like this version, but I'll merge the one from Stewart which drops the pattern and adds the paths for the existing drivers.
cheers
Quoted 14 lines
MAINTAINERS +0
-1@@ -7404,7 +7404,6 @@ F: drivers/pci/hotplug/pnv_php.c F: drivers/pci/hotplug/rpa* F: drivers/scsi/ibmvscsi/ F: tools/testing/selftests/powerpc -N: opal N: /pmac N: powermac N: powernvSignature · 1 line
1.8.3.1
Re: [PATCHv3 4/4] MAINTAINERS: Remove powerpc's opal match
Thanks everyone. Sorry about the mess :)
Quoted 32 lines · Michael Ellerman
Quoted 3 lines · Jon Derrick
PPC's 'opal' match pattern also matches
block/sed-opal.c, where it looks like the 'arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.We thought of it first.
Can't you just rename your driver, Opal Storage Specification, so "oss", that should be pretty unique?
... :)
I don't like this version, but I'll merge the one from Stewart which drops the pattern and adds the paths for the existing drivers.
cheers
Quoted 14 lines
MAINTAINERS +0
-1@@ -7404,7 +7404,6 @@ F: drivers/pci/hotplug/pnv_php.c F: drivers/pci/hotplug/rpa* F: drivers/scsi/ibmvscsi/ F: tools/testing/selftests/powerpc -N: opal N: /pmac N: powermac N: powernvSignature · 1 line
1.8.3.1
RE: [PATCHv3 4/4] MAINTAINERS: Remove powerpc's opal match
Quoted 20 lines
-----Original Message-----
From: [email protected] [mailto:linux-block- [email protected]] On Behalf Of Jon Derrick
Sent: Thursday, February 16, 2017 10:15 AM
To: Michael Ellerman <[email protected]>
Cc: Jens Axboe <[email protected]>; Rafael Antognolli <[email protected]>; Greg Kroah-Hartman <[email protected]>; [email protected]; linux- [email protected]; [email protected]; Christoph Hellwig <[email protected]>; Scott Bauer <[email protected]>
Subject: Re: [PATCHv3 4/4]MAINTAINERS: Remove powerpc's opal match =20
Thanks everyone. Sorry about the mess :)
=20Quoted 3 lines · Michael Ellerman
Quoted 1 line · Jon Derrick
PPC's 'opal' match pattern also matches
block/sed-opal.c, where it loo=
ks
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
like the '
arch/powerpc' file pattern should be enough to match powerpc opal code by itself. Remove the opal regex pattern from powerpc.We thought of it first.
Can't you just rename your driver, Opal Storage Specification, so "oss"=
,
Quoted 3 lines
Quoted 3 lines
that should be pretty unique?
... :)
The library could easily be used for devices supporting the Opalite and Pyr= ite=20
SSCs, not just the Opal SSC. With some effort, I suspect that Enterprise SS= C
could also be supported. So, a broader name might indeed be useful.
The full names of the specifications are:
TCG Storage Security Subsystem Class: Opal TCG Storage Security Subsystem Class: Opalite TCG Storage Security Subsystem Class: Pyrite TCG Storage Security Subsystem Class: Enterprise
---
Robert Elliott, HPE Persistent Memory