Skip to contentSkip to conversation

reset-socfpga: Fix nr_resets property

PATCH Applied Rojhalat Ibrahim 2 participants 2 messages Feb 15, 2017 – Feb 16, 2017 Reset controller framework

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 reset-socfpga: Fix nr_resets property

The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define for two unrelated purposes. It is used
1. as an increment for reset line banks which are 32-bit registers with 4-byte aligned addresses.
2. as the total number of reset line banks which together with the number of resets per bank (32) limits the total number of useable resets to 128 and the highest useable reset ID to 127.

This is clearly wrong as there are resets with higher IDs than 127 defined in include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.

The patch introduces a new define BANK_INCREMENT for calculating the register addresses as before and increases NR_BANKS to 8 for useable reset IDs up to 255.

---
v2: change NR_BANKS to 8

 reset-socfpga.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/reset/reset-socfpga.c +7 -6
index 43e4a9f..07224c0 100644
@@ -25,7 +25,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#define NR_BANKS		4
+#define BANK_INCREMENT		4
+#define NR_BANKS		8
 
 struct socfpga_reset_data {
 	spinlock_t			lock;
@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
 
 	return !(reg & BIT(offset));
 }

--
2.10.2

maintainer Applied
#1 lore raw
Quoted 11 lines · Rojhalat Ibrahim

The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define for two unrelated purposes. It is used
1. as an increment for reset line banks which are 32-bit registers with 4-byte aligned addresses.
2. as the total number of reset line banks which together with the number of resets per bank (32) limits the total number of useable resets to 128 and the highest useable reset ID to 127.

This is clearly wrong as there are resets with higher IDs than 127 defined in include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.

Quoted 6 lines

The patch introduces a new define BANK_INCREMENT for calculating the register addresses as before and increases NR_BANKS to 8 for useable reset IDs up to 255.

---
v2: change NR_BANKS to 8

Applied, thank you.

regards
Philipp

Quoted 54 lines
 reset-socfpga.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/reset/reset-socfpga.c +7 -7
index 43e4a9f..07224c0 100644
@@ -25,7 +25,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#define NR_BANKS		4
+#define BANK_INCREMENT		4
+#define NR_BANKS		8
 
 struct socfpga_reset_data {
 	spinlock_t			lock;
@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
 
 	return !(reg & BIT(offset));
 }
 
--

2.10.2