mmc: core: Provide CMD5 awake and partial_init support
Subsystems (4)
cover mmc: core: Provide CMD5 awake and partial_init support
As per JEDEC spec - CMD5 can be used to awake from sleep mode for emmc. This patch series provide CMD5(awake) + mmc_partial_init support to resume mmc card device. This is mainly to reduce the resume time.
This was tested on db410c (emmc with HS200 mode) and MS8996 (emmc with HS400ES) based internal board. This patch reduced the resume time by ~50% on msm8996 and ~11% on db410c.
As of now this patch series provides a caps (MMC_CAP2_SLEEP_AWAKE) to enable this feature. Since there is no dependency on host platform for this, we can enable this feature by default as well. Thoughts?
Ritesh Harjani (4):
Documentation: mmc: add mmc-sleep-awake
mmc: core: add mmc-sleep-awake caps
mmc: mmc: add support for CMD5 awake
mmc: core: Implement mmc_partial_init during resume
Documentation/devicetree/bindings/mmc/mmc.txt | 2 + drivers/mmc/core/core.c | 13 +++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/mmc.c | 160 ++++++++++++++++++++++++-- include/linux/mmc/card.h | 3 + include/linux/mmc/host.h | 2 + 7 files changed, 176 insertions(+), 7 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
RFC PATCH 1/4 Documentation: mmc: add mmc-sleep-awake
mmc-sleep-awake enables CMD5 awake feature
& partial_init which can help reduce resume
latency on emmc.
--- Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/mmc/mmc.txt +2 -0
@@ -53,6 +53,8 @@ Optional properties: - no-sdio: controller is limited to send sdio cmd during initialization - no-sd: controller is limited to send sd cmd during initialization - no-mmc: controller is limited to send mmc cmd during initialization +- mmc-sleep-awake: eMMC to support awake by CMD5 partial init to reduce resume + latency. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted"
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Rob Herring
maintainerRe: [RFC PATCH 1/4] Documentation: mmc: add mmc-sleep-awake
Quoted 14 lines · Ritesh Harjani
mmc-sleep-awake enables CMD5 awake feature
&partial_initwhich can help reduce resume
latency on emmc.Signed-off-by Ritesh Harjani <[email protected]>--- Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/mmc/mmc.txt +0
-0
Documentation/devicetree/bindings/mmc/mmc.txt Optional properties: · line 57
Quoted 5 lines
Documentation/devicetree/bindings/mmc/mmc.txt +2
-0@@ -53,6 +53,8 @@ Optional properties: - no-sdio: controller is limited to send sdio cmd during initialization - no-sd: controller is limited to send sd cmd during initialization - no-mmc: controller is limited to send mmc cmd during initialization +- mmc-sleep-awake: eMMC to support awake by CMD5 partial init to reduce resume + latency.
This is a feature of the controller or card? If a card, this should be in a card node probably.
Is there a better name that matches the h/w feature?
Rob
Quoted 11 lines
Documentation/devicetree/bindings/mmc/mmc.txt +0
-1*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" --The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
RFC PATCH 2/4 mmc: core: add mmc-sleep-awake caps
In reply to Ritesh HarjaniThis patch introduce mmc-sleep-awake for platforms which want to enable CMD5 awake & partial_init.
--- drivers/mmc/core/host.c | 2 ++ include/linux/mmc/host.h | 1 + 2 files changed, 3 insertions(+)
drivers/mmc/core/host.c +2 -0
@@ -320,6 +320,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |=MMC_CAP2_NO_SD ;if (of_property_read_bool (np,"no-mmc" )) host->caps2 |=MMC_CAP2_NO_MMC ; +if (of_property_read_bool (np,"mmc-sleep-awake" )) + host->caps2 |=MMC_CAP2_SLEEP_AWAKE ; host->dsr_req = !of_property_read_u32 (np,"dsr" , &host->dsr);if (host->dsr_req && (host->dsr & ~0xffff )) {
include/linux/mmc/host.h +1 -0
@@ -303,6 +303,7 @@ struct mmc_host {#define MMC_CAP2_HS400_ES (1 << 20)/* Host supports enhanced strobe */ #define MMC_CAP2_NO_SD (1 << 21)/* Do not send SD commands during initialization */ #define MMC_CAP2_NO_MMC (1 << 22)/* Do not send (e)MMC commands during initialization */ +#define MMC_CAP2_SLEEP_AWAKE (1 << 23)/* Use Sleep/Awake (CMD5) */ mmc_pm_flag_t pm_caps;/* supported pm features */
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
RFC PATCH 3/4 mmc: mmc: add support for CMD5 awake
In reply to Ritesh HarjaniThis patch adds CMD5 awake support for emmc. This will be used to awake emmc from suspend together with partial_init support to reduce resume latencies.
--- drivers/mmc/core/mmc.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-)
drivers/mmc/core/mmc.c +21 -5
@@ -1827,7 +1827,7 @@ static int mmc_can_sleep(struct mmc_card *card)return (card && card->ext_csd.rev >=3 ); } -static int mmc_sleep (struct mmc_host *host) +static int mmc_sleepawake (struct mmc_host *host,bool sleep) {struct mmc_command cmd = {};struct mmc_card *card = host->card;
@@ -1837,13 +1837,16 @@ static int mmc_sleep(struct mmc_host *host)/* Re-tuning can't be done once the card is deselected */ mmc_retune_hold (host); - err =mmc_deselect_cards (host); -if (err) - goto out_release; +if (sleep) { + err =mmc_deselect_cards (host); +if (err) + goto out_release; + } cmd.opcode =MMC_SLEEP_AWAKE ; cmd.arg = card->rca <<16 ; - cmd.arg |=1 <<15 ; +if (sleep) + cmd.arg |=1 <<15 ;/* * If the max_busy_timeout of the host is specified, validate it against
@@ -1871,11 +1874,24 @@ static int mmc_sleep(struct mmc_host *host)if (!cmd.busy_timeout || !(host->caps &MMC_CAP_WAIT_WHILE_BUSY ))mmc_delay (timeout_ms); +if (!sleep) + err =mmc_select_card (card); + out_release:mmc_retune_release (host);return err; } +static int mmc_sleep (struct mmc_host *host) +{ +return mmc_sleepawake (host, true); +} + +static int mmc_awake (struct mmc_host *host) +{ +return mmc_sleepawake (host, false); +} +static int mmc_can_poweroff_notify (const struct mmc_card *card) { return card &&
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
RFC PATCH 4/4 mmc: core: Implement mmc_partial_init during resume
In reply to Ritesh HarjaniThis patch adds mmc_partial_init functionality combining with CMD5 awake feature to reduce resume latency for emmc.
This is not enabled for HS400 mode, since tuning
in HS400 is required to be done in HS200 timing.
--- drivers/mmc/core/core.c | 13 +++++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/mmc.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/mmc/card.h | 3 ++ include/linux/mmc/host.h | 1 + 5 files changed, 150 insertions(+), 2 deletions(-)
drivers/mmc/core/core.c +13 -0
@@ -1197,6 +1197,19 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width)mmc_set_ios (host); } +void mmc_set_init_state (struct mmc_host *host) +{ + host->ios.bus_mode = host->cached_ios.bus_mode; + host->ios.bus_width = host->cached_ios.bus_width; + host->ios.timing = host->cached_ios.timing; +if (host->card && + host->card->mmc_avail_type &EXT_CSD_CARD_TYPE_HS400ES && + host->cached_ios.timing ==MMC_TIMING_MMC_HS400 ) + host->ios.enhanced_strobe = true; + +mmc_set_ios (host); +} +/* * Set initial state after a power cycle or a hw_reset. */
drivers/mmc/core/core.h +1 -0
@@ -58,6 +58,7 @@ int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,void mmc_power_off (struct mmc_host *host);void mmc_power_cycle (struct mmc_host *host,u32 ocr);void mmc_set_initial_state (struct mmc_host *host); +void mmc_set_init_state (struct mmc_host *host);static inline void mmc_delay (unsigned int ms) {
drivers/mmc/core/mmc.c +132 -2
158 lines not on this page · raw message
include/linux/mmc/card.h +3 -0
@@ -93,11 +93,14 @@ struct mmc_ext_csd {unsigned int cmdq_depth;/* Command Queue depth */ #define MMC_FIRMWARE_LEN 8u8 fwrev[MMC_FIRMWARE_LEN ];/* FW version */ +u8 raw_ext_csd_cache_ctrl;/* 33 */ u8 raw_exception_status;/* 54 */ u8 raw_partition_support;/* 160 */ u8 raw_rpmb_size_mult;/* 168 */ u8 raw_erased_mem_count;/* 181 */ +u8 raw_ext_csd_bus_width;/* 183 */ u8 strobe_support;/* 184 */ +u8 raw_ext_csd_hs_timing;/* 185 */ u8 raw_ext_csd_structure;/* 194 */ u8 raw_card_type;/* 196 */ u8 raw_driver_strength;/* 197 */
include/linux/mmc/host.h +1 -0
@@ -320,6 +320,7 @@ struct mmc_host {spinlock_t lock;/* lock for claim and bus ops */ struct mmc_ios ios;/* current io bus settings */ +struct mmc_ios cached_ios;/* group bitfields together to minimize padding */ unsigned int use_spi_crc:1;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Adrian Hunter
maintainerRe: [RFC PATCH 4/4] mmc: core: Implement mmc_partial_init during resume
Quoted 6 lines · Ritesh Harjani
This patch adds
mmc_partial_initfunctionality combining with CMD5 awake feature to reduce resume latency for emmc.This is not enabled for HS400 mode, since tuning
in HS400 is required to be done in HS200 timing.
How does that matter?
Re: [RFC PATCH 4/4] mmc: core: Implement mmc_partial_init during resume
In reply to Ritesh HarjaniQuoted 24 lines · Ritesh Harjani
This patch adds
mmc_partial_initfunctionality combining with CMD5 awake feature to reduce resume latency for emmc.This is not enabled for HS400 mode, since tuning
in HS400 is required to be done in HS200 timing.Signed-off-by Talel Shenhar <[email protected]>Signed-off-by Maya Erez <[email protected]>Signed-off-by Asutosh Das <[email protected]>Signed-off-by Ritesh Harjani <[email protected]>--- drivers/mmc/core/core.c | 13 +++++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/mmc.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/mmc/card.h | 3 ++ include/linux/mmc/host.h | 1 + 5 files changed, 150 insertions(+), 2 deletions(-)drivers/mmc/core/core.c +0
-0
drivers/mmc/core/core.c void mmc_set_bus_width(struct mmc_host *host, unsigned int width) · line 1204
Quoted 8 lines
drivers/mmc/core/core.c +5
-0@@ -1197,6 +1197,19 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width)mmc_set_ios (host); } +void mmc_set_init_state (struct mmc_host *host) +{ + host->ios.bus_mode = host->cached_ios.bus_mode; + host->ios.bus_width = host->cached_ios.bus_width; + host->ios.timing = host->cached_ios.timing;
Is this really sufficient? Isn't there more to restore from the cached ios?
drivers/mmc/core/core.c void mmc_set_bus_width(struct mmc_host *host, unsigned int width) · line 1208
Quoted 4 lines
drivers/mmc/core/core.c +4
-0+if (host->card && + host->card->mmc_avail_type &EXT_CSD_CARD_TYPE_HS400ES && + host->cached_ios.timing ==MMC_TIMING_MMC_HS400 ) + host->ios.enhanced_strobe = true;
Why don't you check the cached value for enhanced_strobe instead?
Quoted 28 lines
drivers/mmc/core/core.c +4
-0+ +mmc_set_ios (host); +} +/* * Set initial state after a power cycle or a hw_reset. */ drivers/mmc/core/core.h +1
-0@@ -58,6 +58,7 @@ int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,void mmc_power_off (struct mmc_host *host);void mmc_power_cycle (struct mmc_host *host,u32 ocr);void mmc_set_initial_state (struct mmc_host *host); +void mmc_set_init_state (struct mmc_host *host);static inline void mmc_delay (unsigned int ms) {drivers/mmc/core/mmc.c +1
-0@@ -1827,6 +1827,28 @@ static int mmc_can_sleep(struct mmc_card *card)return (card && card->ext_csd.rev >=3 ); } +static int mmc_can_sleepawake_mode (struct mmc_host *host)
drivers/mmc/core/mmc.c static int mmc_can_sleep(struct mmc_card *card) · line 1840
Quoted 10 lines
drivers/mmc/core/mmc.c +10
-0+{ +/* +* Disabled for HS400 mode since it requires tuning +* to be done in HS200 timing and then switching +* to HS400 mode. +*/ +switch (host->cached_ios.timing) { +case MMC_TIMING_MMC_HS400 : +if (!(host->card->mmc_avail_type &EXT_CSD_CARD_TYPE_HS400ES )) +return 0 ;
I don't get this? Could you elaborate why this case doesn’t work?
drivers/mmc/core/mmc.c static int mmc_can_sleep(struct mmc_card *card) · line 1848
Quoted 8 lines
drivers/mmc/core/mmc.c +8
-0+default : +return 1 ; + } +} + +static int mmc_can_sleepawake (struct mmc_host *host) +{ + return (host && host->caps2 & MMC_CAP2_SLEEP_AWAKE &&
As I stated in the response to the cover letter, we could check for MMC_CAP2_FULL_PWR_CYCLE instead.
Although, the problem with that would be if the host/soc supports a full power cycle, but still doesn't set MMC_CAP2_FULL_PWR_CYCLE. If that is the case, you shouldn't be using CMD5 to wake up the card from sleep as it won't work.
This complexity, is one of the reasons to why we so far have chosen to use CMD0 to wakeup the card from sleep. Because we know it is *always* going to work.
I guess if we implement a fallback method of using CMD0 when CMD5 fails, perhaps that would be acceptable...
However, trying out CMD5 first and thus spend time on this re-initialization sequence, then finding out that it fails will of course be a waste of time.
Quoted 85 lines
drivers/mmc/core/mmc.c +78
-0+ mmc_can_sleep(host->card) && mmc_can_sleepawake_mode(host)); +} +static int mmc_sleepawake (struct mmc_host *host,bool sleep) {struct mmc_command cmd = {};@@ -1964,6 +1986,100 @@ static void mmc_detect(struct mmc_host *host) } } +static int mmc_cache_card_ext_csd (struct mmc_host *host) +{ +int err; +u8 *ext_csd; +struct mmc_card *card = host->card; + + err =mmc_get_ext_csd (card, &ext_csd); +if (err || !ext_csd) { +pr_err ("%s: %s: mmc_get_ext_csd failed (%d)\n" , +mmc_hostname (host), __func__, err); +return err; + } + +/* only cache read/write fields that the sw changes */ + card->ext_csd.raw_ext_csd_cache_ctrl = ext_csd[EXT_CSD_CACHE_CTRL ]; + card->ext_csd.raw_ext_csd_bus_width = ext_csd[EXT_CSD_BUS_WIDTH ]; + card->ext_csd.raw_ext_csd_hs_timing = ext_csd[EXT_CSD_HS_TIMING ]; +kfree (ext_csd); +return 0 ; +} + +static int mmc_test_awake_ext_csd (struct mmc_host *host) +{ +int err; +u8 *ext_csd; +struct mmc_card *card = host->card; + +return 0 ; + err =mmc_get_ext_csd (card, &ext_csd); +if (err) { +pr_err ("%s: %s: mmc_get_ext_csd failed (%d)\n" , +mmc_hostname (host), __func__, err); +return err; + } + +/* only compare read/write fields that the sw changes */ +pr_debug ("%s: %s: type(cached:current) cache_ctrl(%d:%d) bus_width (%d:%d) timing(%d:%d)\n" , +mmc_hostname (host), __func__, + card->ext_csd.raw_ext_csd_cache_ctrl, + ext_csd[EXT_CSD_CACHE_CTRL ], + card->ext_csd.raw_ext_csd_bus_width, + ext_csd[EXT_CSD_BUS_WIDTH ], + card->ext_csd.raw_ext_csd_hs_timing, + ext_csd[EXT_CSD_HS_TIMING ]); + + err = !((card->ext_csd.raw_ext_csd_cache_ctrl == + ext_csd[EXT_CSD_CACHE_CTRL ]) && + (card->ext_csd.raw_ext_csd_bus_width == + ext_csd[EXT_CSD_BUS_WIDTH ]) && + (card->ext_csd.raw_ext_csd_hs_timing == + ext_csd[EXT_CSD_HS_TIMING ])); + +kfree (ext_csd); +return err; +} + +static int mmc_partial_init (struct mmc_host *host) +{ +int err =0 ; +struct mmc_card *card = host->card; + +mmc_set_init_state (host); +mmc_set_clock (host, host->cached_ios.clock); +if (mmc_card_hs400 (card)) { +if (card->mmc_avail_type &EXT_CSD_CARD_TYPE_HS400ES ) { +if (host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe (host, + &host->ios); + } + }else if (mmc_card_hs200 (card)) { + err =mmc_hs200_tuning (card); +if (err) +pr_warn ("%s: %s: tuning execution failed (%d)\n" , +mmc_hostname (host), __func__, err); + }
drivers/mmc/core/mmc.c static void mmc_detect(struct mmc_host *host) · line 2073
Quoted 10 lines
drivers/mmc/core/mmc.c +10
-0+ +/* +* The ext_csd is read to make sure the card did not went through +* Power-failure during sleep period. +* A subset of the W/E_P, W/C_P register will be tested. In case +* these registers values are different from the values that were +* cached during suspend, we will conclude that a Power-failure occurred +* and will do full initialization sequence. +*/ + err =mmc_test_awake_ext_csd (host);
If the card is power cycled (in other words, VCCQ is powered off) the card won't respond properly on a CMD5 to wakeup from sleep.
Then, why do we need to validate the EXT_CSD? I don't get it.
Quoted 15 lines
drivers/mmc/core/mmc.c +9
-0+if (err) { +pr_err ("%s: %s: fail on ext_csd read (%d)\n" , +mmc_hostname (host), __func__, err); + goto out; + } +out: +return err; +} +static int _mmc_suspend (struct mmc_host *host,bool is_suspend) {int err =0 ;@@ -1988,7 +2104,11 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)if (mmc_can_poweroff_notify (host->card) && ((host->caps2 &MMC_CAP2_FULL_PWR_CYCLE ) || !is_suspend))
drivers/mmc/core/mmc.c static int _mmc_suspend(struct mmc_host *host, bool is_suspend) · line 2114
Quoted 10 lines
drivers/mmc/core/mmc.c +5
-1err =mmc_poweroff_notify (host->card, notify_type); - else if (mmc_can_sleep(host->card)) + else if (mmc_can_sleepawake(host)) { +memcpy (&host->cached_ios, &host->ios,sizeof (host->cached_ios)); +mmc_cache_card_ext_csd (host); + err =mmc_sleep (host); + } else if (mmc_can_sleep(host->card)) err =mmc_sleep (host); else if (!mmc_host_is_spi(host)) err =mmc_deselect_cards (host);
So, __mmc_suspend() calls mmc_power_off() which resets the ios settings and power off the card.
Then in _mmc_resume() you restore those settings, which seems like it could work....
drivers/mmc/core/mmc.c static int _mmc_resume(struct mmc_host *host) · line 2156
Quoted 7 lines
drivers/mmc/core/mmc.c +2
-1@@ -2032,7 +2152,17 @@ static int _mmc_resume(struct mmc_host *host) goto out;mmc_power_up (host, host->card->ocr); - err =mmc_init_card (host, host->card->ocr, host->card); +if (mmc_can_sleepawake (host)) { + err =mmc_awake (host);
... however this looks suspiciously wrong. Should you really send a CMD5 to wakeup the card without first restoring the cached ios settings?
Quoted 44 lines
drivers/mmc/core/mmc.c +9
-0+if (!err) + err =mmc_partial_init (host); +if (err) +pr_err ("%s: awake failed (%d), fallback to full init\n" , +mmc_hostname (host), err); + } +if (err || !mmc_can_sleepawake (host)) + err =mmc_init_card (host, host->card->ocr, host->card); +mmc_card_clr_suspended (host->card); out:include/linux/mmc/card.h +3
-0@@ -93,11 +93,14 @@ struct mmc_ext_csd {unsigned int cmdq_depth;/* Command Queue depth */ #define MMC_FIRMWARE_LEN 8u8 fwrev[MMC_FIRMWARE_LEN ];/* FW version */ +u8 raw_ext_csd_cache_ctrl;/* 33 */ u8 raw_exception_status;/* 54 */ u8 raw_partition_support;/* 160 */ u8 raw_rpmb_size_mult;/* 168 */ u8 raw_erased_mem_count;/* 181 */ +u8 raw_ext_csd_bus_width;/* 183 */ u8 strobe_support;/* 184 */ +u8 raw_ext_csd_hs_timing;/* 185 */ u8 raw_ext_csd_structure;/* 194 */ u8 raw_card_type;/* 196 */ u8 raw_driver_strength;/* 197 */ include/linux/mmc/host.h +1
-1@@ -320,6 +320,7 @@ struct mmc_host {spinlock_t lock;/* lock for claim and bus ops */ struct mmc_ios ios;/* current io bus settings */ +struct mmc_ios cached_ios;/* group bitfields together to minimize padding */ unsigned int use_spi_crc:1; --
Quoted 3 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 3 lines · Ritesh Harjani
As per JEDEC spec - CMD5 can be used to awake from sleep mode for emmc. This patch series provide CMD5(awake) +
mmc_partial_initsupport to resume mmc card device. This is mainly to reduce the resume time.
I assume with "resume time" you don't mean "system PM resume time"?
The current approach we have for MMC is to postpone system PM resume of the card until it's actually needed, thus via runtime PM instead. Then the time it takes to re-initialize the eMMC don't affect the system PM resume time at all.
Therefore I am wondering about how big of a problem this really is. Is there a specific use case you are optimizing for?
Quoted 4 lines
This was tested on db410c (emmc with HS200 mode) and MS8996 (emmc with HS400ES) based internal board. This patch reduced the resume time by ~50% on msm8996 and ~11% on db410c.
The improved behaviour in percentage is very interesting, but I would also like to see real numbers.
Moreover, I would like to know what kind of mechanism the corresponding host drivers/controllers are using for card busy detection?
Quoted 4 lines
As of now this patch series provides a caps (
MMC_CAP2_SLEEP_AWAKE) to enable this feature. Since there is no dependency on host platform for this, we can enable this feature by default as well. Thoughts?
I will look into the series in more detail, however we must not add a corresponding DT binding for this as this isn't a HW configuration. I guess what you need to know is that VCCQ stays powered on when the card is a sleep, else waking up with CMD5 won't work (MMC_CAP_FULL_PWR_CYCLE).
The current main concern I can think of, is whether the added complexity to the wakeup path can be justified for the improved behaviour.
Quoted 17 lines
Ritesh Harjani (4):
Documentation: mmc: add mmc-sleep-awake
mmc: core: add mmc-sleep-awake caps
mmc: mmc: add support for CMD5 awake
mmc: core: Implementmmc_partial_initduring resumeDocumentation/devicetree/bindings/mmc/mmc.txt | 2 + drivers/mmc/core/core.c | 13 +++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/mmc.c | 160 ++++++++++++++++++++++++-- include/linux/mmc/card.h | 3 + include/linux/mmc/host.h | 2 + 7 files changed, 176 insertions(+), 7 deletions(-)
Quoted 4 lines
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Kind regards
Uffe
Hi Ulf,
Quoted 6 lines · Ulf Hansson
Quoted 3 lines · Ritesh Harjani
As per JEDEC spec - CMD5 can be used to awake from sleep mode for emmc. This patch series provide CMD5(awake) +
mmc_partial_initsupport to resume mmc card device. This is mainly to reduce the resume time.I assume with "resume time" you don't mean "system PM resume time"?
I meant mmc_runtime_resume time which will be accounted only in MMC card run-time resume now.
Quoted 8 lines
The current approach we have for MMC is to postpone system PM resume of the card until it's actually needed, thus via runtime PM instead. Then the time it takes to re-initialize the eMMC don't affect the system PM resume time at all.
Therefore I am wondering about how big of a problem this really is. Is there a specific use case you are optimizing for?
In general MMC card resume time will be optimized.
Quoted 5 lines
Quoted 5 lines
This was tested on db410c (emmc with HS200 mode) and MS8996 (emmc with HS400ES) based internal board. This patch reduced the resume time by ~50% on msm8996 and ~11% on db410c.
Sorry, I did not enable MMC_CAP_WAIT_WHILE_BUSY on db410c. That's why we see 11% improvement only. After I enabled this cap, I see ~47% improvement in mmc_runtime_resume on db410c.
Quoted 3 lines
The improved behaviour in percentage is very interesting, but I would also like to see real numbers.
<DB410c>
1. ~110ms without the patch on db410c (with MMC_CAP_WAIT_WHILE_BUSY)
2. ~97ms with the patch on db410c (w/o enabling MMC_CAP_WAIT_WHILE_BUSY)
3. ~58ms with the patch (with MMC_CAP_WAIT_WHILE_BUSY capability).= ~47%
<MSM8996>
1. ~142ms without the patch on msm8996 (with MMC_CAP_WAIT_WHILE_BUSY)
2. ~50ms with the patch on msm8996. (with MMC_CAP_WAIT_WHILE_BUSY)= ~60%
Quoted 4 lines
Moreover, I would like to know what kind of mechanism the corresponding host
drivers/controllersare using for card busy detection?
These controllers have MMC_CAP_WAIT_WHILE_BUSY capability enabled.
I have tested with below caps.
drivers/mmc/host/sdhci-msm.c +3 -0
@@ -1283,6 +1283,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)pm_runtime_use_autosuspend (&pdev->dev); host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning; + host->mmc->caps |=MMC_CAP_WAIT_WHILE_BUSY ; + host->mmc->caps |=MMC_CAP_AGGRESSIVE_PM ; + host->mmc->caps2 |=MMC_CAP2_SLEEP_AWAKE ; ret =sdhci_add_host (host);if (ret) goto pm_runtime_disable;
Quoted 7 lines
Quoted 5 lines
As of now this patch series provides a caps (
MMC_CAP2_SLEEP_AWAKE) to enable this feature. Since there is no dependency on host platform for this, we can enable this feature by default as well. Thoughts?I will look into the series in more detail, however we must not add a
Sure, please let me know your feedback.
Quoted 4 lines
corresponding DT binding for this as this isn't a HW configuration. I guess what you need to know is that VCCQ stays powered on when the card is a sleep, else waking up with CMD5 won't work (
MMC_CAP_FULL_PWR_CYCLE).
Ok.
Quoted 4 lines
The current main concern I can think of, is whether the added complexity to the wakeup path can be justified for the improved behaviour.
This may not be very complex actually.
Quoted 26 lines
Quoted 18 lines
Ritesh Harjani (4):
Documentation: mmc: add mmc-sleep-awake
mmc: core: add mmc-sleep-awake caps
mmc: mmc: add support for CMD5 awake
mmc: core: Implementmmc_partial_initduring resumeDocumentation/devicetree/bindings/mmc/mmc.txt | 2 + drivers/mmc/core/core.c | 13 +++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/mmc.c | 160 ++++++++++++++++++++++++-- include/linux/mmc/card.h | 3 + include/linux/mmc/host.h | 2 + 7 files changed, 176 insertions(+), 7 deletions(-)Quoted 4 lines
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.Kind regards
Uffe
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Hi Ritesh,
Quoted 4 lines · Ritesh Harjani
As per JEDEC spec - CMD5 can be used to awake from sleep mode for emmc. This patch series provide CMD5(awake) +
mmc_partial_initsupport to resume mmc card device. This is mainly to reduce the resume time.
For modem eMMC devices which support vccq to be 1v8, you patch seem to work fine but that didn't work for some eMMCs that only support 3v3 vccq, for instance, some older v4.41 eMMC devices.
Also, the spec didn't clearly have a statement about the fact that the partial init should work if keeping vqmmc.
So finally you should have to add a fallback method once the partial init doesn't work well. In the point, this policy is not just host specified, but also eMMC device specified. So I guess this is why you expose a new DT property here instead?!
Quoted 24 lines
This was tested on db410c (emmc with HS200 mode) and MS8996 (emmc with HS400ES) based internal board. This patch reduced the resume time by ~50% on msm8996 and ~11% on db410c.
As of now this patch series provides a caps (
MMC_CAP2_SLEEP_AWAKE) to enable this feature. Since there is no dependency on host platform for this, we can enable this feature by default as well. Thoughts?Ritesh Harjani (4):
Documentation: mmc: add mmc-sleep-awake
mmc: core: add mmc-sleep-awake caps
mmc: mmc: add support for CMD5 awake
mmc: core: Implementmmc_partial_initduring resumeDocumentation/devicetree/bindings/mmc/mmc.txt | 2 + drivers/mmc/core/core.c | 13 +++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/mmc.c | 160 ++++++++++++++++++++++++-- include/linux/mmc/card.h | 3 + include/linux/mmc/host.h | 2 + 7 files changed, 176 insertions(+), 7 deletions(-)
Signature · 2 lines
Best Regards Shawn Lin