Skip to contentSkip to conversation

dts: aspeed: zaius: Enable FSI master

PATCH In review Eddie James 2 participants 2 messages Feb 20, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dts: aspeed: zaius: Enable FSI master

From: "Edward A. James" <[email protected]>

set status to "okay" instead of "disabled"

---
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +1 -1
index e1c9b3f..8f563dd 100644
@@ -78,7 +78,7 @@
 	fsi-master {
 		compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
 
-		status = "disabled";
+		status = "okay";
 
 		clock-gpios = <&gpio ASPEED_GPIO(C, 3) GPIO_ACTIVE_HIGH>;
 		data-gpios = <&gpio ASPEED_GPIO(C, 2) GPIO_ACTIVE_HIGH>;
Signature · 1 line
1.8.3.1
maintainer
#1 lore raw
Quoted 3 lines · Eddie James

From: "Edward A. James" <[email protected]>

set status to "okay" instead of "disabled"

Can we get away with doing this for machines one by one? I expect we should switch all P9 machines at once.

Cheers,

Joel

Quoted 22 lines
---
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +1 -2
index e1c9b3f..8f563dd 100644
@@ -78,7 +78,7 @@
        fsi-master {
                compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
 
-               status = "disabled";
+               status = "okay";
 
                clock-gpios = <&gpio ASPEED_GPIO(C, 3) GPIO_ACTIVE_HIGH>;
                data-gpios = <&gpio ASPEED_GPIO(C, 2) GPIO_ACTIVE_HIGH>;
--

1.8.3.1