arm64: Add support for VMID aware PIPT instruction cache
PATCH RESEND 1/1 arm64: Add support for VMID aware PIPT instruction cache
In ARMv8.2 extension, a new instruction cache type 'VMID aware PIPT' was introduced in addition to AIVIVT/VIPT/PIPT. Instruction cache maintenance operations when issued from Non-secure EL1/EL0 have an effect only on cache line entries those were fetched in Non-secure EL1/EL0 using the current VMID. For software point of view, this cache type is same as PIPT and no aliasing problem.
The updated CTR_EL0.L1IP definition.
00: VMID aware PIPT
01: ASID-tagged Virtual Index, Virtual Tag (AIVIVT) 10: Virtual Index, Physical Tag (VIPT)
11: Physical Index, Physical Tag (PIPT)
--- arch/arm64/include/asm/cachetype.h | 2 +- arch/arm64/kernel/cpuinfo.c | 9 +++++---- 2 files changed, 6 insertions(+), 5 deletions(-)
arch/arm64/include/asm/cachetype.h +1 -1
@@ -23,7 +23,7 @@#define CTR_CWG_SHIFT 24#define CTR_CWG_MASK 15 -#define ICACHE_POLICY_RESERVED 0 +#define ICACHE_POLICY_VPIPT 0#define ICACHE_POLICY_AIVIVT 1#define ICACHE_POLICY_VIPT 2#define ICACHE_POLICY_PIPT 3
arch/arm64/kernel/cpuinfo.c +5 -4
@@ -43,7 +43,7 @@static struct cpuinfo_arm64 boot_cpu_data;static char *icache_policy_str[] = { - [ICACHE_POLICY_RESERVED ] ="RESERVED/UNKNOWN" , + [ICACHE_POLICY_VPIPT ] ="VPIPT" , [ICACHE_POLICY_AIVIVT ] ="AIVIVT" , [ICACHE_POLICY_VIPT ] ="VIPT" , [ICACHE_POLICY_PIPT ] ="PIPT" ,
@@ -288,7 +288,7 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)unsigned int cpu =smp_processor_id ();u32 l1ip =CTR_L1IP (info->reg_ctr); -if (l1ip !=ICACHE_POLICY_PIPT ) { +if (l1ip ==ICACHE_POLICY_AIVIVT || l1ip ==ICACHE_POLICY_VIPT ) {/* * VIPT caches are non-aliasing if the VA always equals the PA * in all bit positions that are covered by the index. This is
@@ -299,9 +299,10 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)if (l1ip !=ICACHE_POLICY_VIPT || waysize >PAGE_SIZE )set_bit (ICACHEF_ALIASING , &__icache_flags); + +if (l1ip ==ICACHE_POLICY_AIVIVT ) +set_bit (ICACHEF_AIVIVT , &__icache_flags); } -if (l1ip ==ICACHE_POLICY_AIVIVT ) -set_bit (ICACHEF_AIVIVT , &__icache_flags);pr_info ("Detected %s I-cache on CPU%d\n" , icache_policy_str[l1ip], cpu); }
Signature · 2 lines
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Hi Shanker,
Sorry for the delay in responding to this -- the patch isn't as straightforward as it looks.
Quoted 6 lines · Shanker Donthineni
In ARMv8.2 extension, a new instruction cache type 'VMID aware PIPT' was introduced in addition to AIVIVT/VIPT/PIPT. Instruction cache maintenance operations when issued from Non-secure EL1/EL0 have an effect only on cache line entries those were fetched in Non-secure EL1/EL0 using the current VMID. For software point of view, this cache type is same as PIPT and no aliasing problem.
This may well cause problems for KVM with non-VHE, because the host VMID is different from the guest VMID, yet we assume that I-cache invalidation by the host *will* affect the guest when, for example, invalidating the I-cache for pages holding the guest kernel Image.
I have some patches to address this (and some other bits in this area), so I'll polish them off and post them shortly. Given that we're in the merge window and this is 4.12 material, it's not urgent.
Will