drm/i915/lspcon: Switch back to PCON mode after output replug
Subsystems (2)
PATCH 1/1 drm/i915/lspcon: Switch back to PCON mode after output replug
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of short pulses to signal output unplug/plug events. This is contrary to how branch devices normally work which use short HPD signaling. This chip will also switch to LS mode after an unplug event, which could be the consequence of the long HPD signaling semantics and an effort to save power automatically. Because of this we'll fail to do AUX and detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
Cc: [email protected]
Cc: Shashank Sharma <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912
--- drivers/gpu/drm/i915/intel_dp.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -4270,12 +4270,16 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)static bool intel_dp_short_pulse (struct intel_dp *intel_dp) { +struct intel_lspcon *lspcon =dp_to_lspcon (intel_dp);struct drm_device *dev =intel_dp_to_dev (intel_dp);struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret; +if (lspcon->active) +lspcon_resume (lspcon); +/* * Clearing compliance test variables to allow capturing * of values for next automated test request.
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/lspcon: Switch back to PCON mode after output replug
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of short pulses to signal output unplug/plug events. This is contrary to how branch devices normally work which use short HPD signaling. This chip will also switch to LS mode after an unplug event, which could be the consequence of the long HPD signaling semantics and an effort to save power automatically. Because of this we'll fail to do AUX and detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
v2:
- Switch the mode in the proper spot.
Cc: [email protected]
Cc: Shashank Sharma <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912
--- drivers/gpu/drm/i915/intel_dp.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -4326,9 +4326,13 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)static enum drm_connector_status intel_dp_detect_dpcd (struct intel_dp *intel_dp) { +struct intel_lspcon *lspcon =dp_to_lspcon (intel_dp);uint8_t *dpcd = intel_dp->dpcd;uint8_t type; +if (lspcon->active) +lspcon_resume (lspcon); +if (!intel_dp_get_dpcd (intel_dp))return connector_status_disconnected;
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 13 lines · Imre Deak
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of short pulses to signal output unplug/plug events. This is contrary to how branch devices normally work which use short HPD signaling. This chip will also switch to LS mode after an unplug event, which could be the consequence of the long HPD signaling semantics and an effort to save power automatically. Because of this we'll fail to do AUX and detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
v2:
- Switch the mode in the proper spot.
Quoted 6 lines
Cc: [email protected]
Cc: Shashank Sharma <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912Reported-and-tested-by [email protected]Signed-off-by Imre Deak <[email protected]>
lgtm
Quoted 24 lines
--- drivers/gpu/drm/i915/intel_dp.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/gpu/drm/i915/intel_dp.c +4
-0@@ -4326,9 +4326,13 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)static enum drm_connector_status intel_dp_detect_dpcd (struct intel_dp *intel_dp) { +struct intel_lspcon *lspcon =dp_to_lspcon (intel_dp);uint8_t *dpcd = intel_dp->dpcd;uint8_t type; +if (lspcon->active) +lspcon_resume (lspcon); +if (!intel_dp_get_dpcd (intel_dp))return connector_status_disconnected;Signature · 1 line
2.5.0
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/lspcon: Switch back to PCON mode after output replug (rev2)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: drm/i915/lspcon: Switch back to PCON mode after output replug (rev2)
URL : https://patchwork.freedesktop.org/series/20072/
State : success
== Summary ==
Series 20072v2 drm/i915/lspcon: Switch back to PCON mode after output replug
https://patchwork.freedesktop.org/api/1.0/series/20072/revisions/2/mbox/
fi-bdw-5557u total:253 pass:242 dwarn:0 dfail:0 fail:0 skip:11 fi-bsw-n3050 total:253 pass:214 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-j4205 total:253 pass:234 dwarn:0 dfail:0 fail:0 skip:19 fi-bxt-t5700 total:83 pass:70 dwarn:0 dfail:0 fail:0 skip:12 fi-byt-j1900 total:253 pass:226 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-n2820 total:253 pass:222 dwarn:0 dfail:0 fail:0 skip:31 fi-hsw-4770 total:253 pass:237 dwarn:0 dfail:0 fail:0 skip:16 fi-hsw-4770r total:253 pass:237 dwarn:0 dfail:0 fail:0 skip:16 fi-ilk-650 total:253 pass:203 dwarn:0 dfail:0 fail:0 skip:50 fi-ivb-3520m total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-ivb-3770 total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-kbl-7500u total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-skl-6260u total:253 pass:243 dwarn:0 dfail:0 fail:0 skip:10 fi-skl-6700hq total:253 pass:236 dwarn:0 dfail:0 fail:0 skip:17 fi-skl-6700k total:253 pass:231 dwarn:4 dfail:0 fail:0 skip:18 fi-skl-6770hq total:253 pass:243 dwarn:0 dfail:0 fail:0 skip:10 fi-snb-2520m total:253 pass:225 dwarn:0 dfail:0 fail:0 skip:28 fi-snb-2600 total:253 pass:224 dwarn:0 dfail:0 fail:0 skip:29
bf89ec45d0822835b03910371ac0baf46c4efa2d drm-tip: 2017y-02m-22d-14h-30m-04s UTC integration manifest a6ef522 drm/i915/lspcon: Switch back to PCON mode after output replug
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3932/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✓ Fi.CI.BAT: success for drm/i915/lspcon: Switch back to PCON mode after output replug (rev2)
Quoted 5 lines · Patchwork
== Series Details ==
Series: drm/i915/lspcon: Switch back to PCON mode after output replug (rev2)
URL : https://patchwork.freedesktop.org/series/20072/
State : success
I pushed the patch to -dinq, thanks for the report/testing and the review.
Quoted 25 lines
== Summary ==
Series 20072v2 drm/i915/lspcon: Switch back to PCON mode after output replug
https://patchwork.freedesktop.org/api/1.0/series/20072/revisions/2/mbox/fi-bdw-5557u total:253 pass:242 dwarn:0 dfail:0 fail:0 skip:11 fi-bsw-n3050 total:253 pass:214 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-j4205 total:253 pass:234 dwarn:0 dfail:0 fail:0 skip:19 fi-bxt-t5700 total:83 pass:70 dwarn:0 dfail:0 fail:0 skip:12 fi-byt-j1900 total:253 pass:226 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-n2820 total:253 pass:222 dwarn:0 dfail:0 fail:0 skip:31 fi-hsw-4770 total:253 pass:237 dwarn:0 dfail:0 fail:0 skip:16 fi-hsw-4770r total:253 pass:237 dwarn:0 dfail:0 fail:0 skip:16 fi-ilk-650 total:253 pass:203 dwarn:0 dfail:0 fail:0 skip:50 fi-ivb-3520m total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-ivb-3770 total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-kbl-7500u total:253 pass:235 dwarn:0 dfail:0 fail:0 skip:18 fi-skl-6260u total:253 pass:243 dwarn:0 dfail:0 fail:0 skip:10 fi-skl-6700hq total:253 pass:236 dwarn:0 dfail:0 fail:0 skip:17 fi-skl-6700k total:253 pass:231 dwarn:4 dfail:0 fail:0 skip:18 fi-skl-6770hq total:253 pass:243 dwarn:0 dfail:0 fail:0 skip:10 fi-snb-2520m total:253 pass:225 dwarn:0 dfail:0 fail:0 skip:28 fi-snb-2600 total:253 pass:224 dwarn:0 dfail:0 fail:0 skip:29
Quoted 6 lines
bf89ec45d0822835b03910371ac0baf46c4efa2ddrm-tip: 2017y-02m-22d-14h-30m-04s UTC integration manifest a6ef522 drm/i915/lspcon: Switch back to PCON mode after output replug== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3932/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx