Skip to contentSkip to conversation

cpufreq: intel_pstate: Fix operation mode switching

PATCH In review Rafael J. Wysocki 2 participants 2 messages Feb 27, 2017 – Feb 28, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cpufreq: intel_pstate: Fix operation mode switching

From: Rafael J. Wysocki <[email protected]>

There is a problem with intel_pstate operation mode switching introduced by commit fb1fe1041c04 (cpufreq: intel_pstate: Operation mode control from sysfs), because the global sysfs limits are preserved across operation modes while per-policy limits are reinitialized from scratch and both sets of limits may get out of sync this wya.

Fix that by always reinitializing the global limits upon the registration of the driver.

Fixes fb1fe1041c04 (cpufreq: intel_pstate: Operation mode control from sysfs)
---
 drivers/cpufreq/intel_pstate.c |   65 +++++++++++++----------------------------
 1 file changed, 22 insertions(+), 43 deletions(-)
drivers/cpufreq/intel_pstate.c +22 -43
Index: linux-pm/drivers/cpufreq/intel_pstate.c
===================================================================
@@ -364,37 +364,25 @@ static bool driver_registered __read_mos
 static bool acpi_ppc;
 #endif
 
-static struct perf_limits performance_limits = {
-	.no_turbo = 0,
-	.turbo_disabled = 0,
-	.max_perf_pct = 100,
-	.max_perf = int_ext_tofp(1),
-	.min_perf_pct = 100,
-	.min_perf = int_ext_tofp(1),
-	.max_policy_pct = 100,
-	.max_sysfs_pct = 100,
-	.min_policy_pct = 0,
-	.min_sysfs_pct = 0,
-};
+static struct perf_limits performance_limits;
+static struct perf_limits powersave_limits;
+static struct perf_limits *limits;
 
-static struct perf_limits powersave_limits = {
-	.no_turbo = 0,
-	.turbo_disabled = 0,
-	.max_perf_pct = 100,
-	.max_perf = int_ext_tofp(1),
-	.min_perf_pct = 0,
-	.min_perf = 0,
-	.max_policy_pct = 100,
-	.max_sysfs_pct = 100,
-	.min_policy_pct = 0,
-	.min_sysfs_pct = 0,
-};
+static void intel_pstate_init_limits(struct perf_limits *limits)
+{
+	memset(limits, 0, sizeof(*limits));
+	limits->max_perf_pct = 100;
+	limits->max_perf = int_ext_tofp(1);
+	limits->max_policy_pct = 100;
+	limits->max_sysfs_pct = 100;
+}
 
-#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
-static struct perf_limits *limits = &performance_limits;
-#else
-static struct perf_limits *limits = &powersave_limits;
-#endif
+static void intel_pstate_set_performance_limits(struct perf_limits *limits)
+{
+	intel_pstate_init_limits(limits);
+	limits->min_perf_pct = 100;
+	limits->min_perf = int_ext_tofp(1);
+}
 
 static DEFINE_MUTEX(intel_pstate_driver_lock);
 static DEFINE_MUTEX(intel_pstate_limits_lock);
@@ -2084,20 +2072,6 @@ static void intel_pstate_clear_update_ut
 	synchronize_sched();
 }
 
-static void intel_pstate_set_performance_limits(struct perf_limits *limits)
-{
-	limits->no_turbo = 0;
-	limits->turbo_disabled = 0;
-	limits->max_perf_pct = 100;
-	limits->max_perf = int_ext_tofp(1);
-	limits->min_perf_pct = 100;
-	limits->min_perf = int_ext_tofp(1);
-	limits->max_policy_pct = 100;
-	limits->max_sysfs_pct = 100;
-	limits->min_policy_pct = 0;
-	limits->min_sysfs_pct = 0;
-}
-
 static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy,
 					    struct perf_limits *limits)
 {
@@ -2466,6 +2440,11 @@ static int intel_pstate_register_driver(
 {
 	int ret;
 
+	intel_pstate_init_limits(&powersave_limits);
+	intel_pstate_set_performance_limits(&performance_limits);
+	limits = IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE) ?
+			&performance_limits : &powersave_limits;
+
 	ret = cpufreq_register_driver(intel_pstate_driver);
 	if (ret) {
 		intel_pstate_driver_cleanup();
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines · Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

There is a problem with intel_pstate operation mode switching introduced by commit fb1fe1041c04 (cpufreq: intel_pstate: Operation mode control from sysfs), because the global sysfs limits are preserved across operation modes while per-policy limits are reinitialized from scratch and both sets of limits may get out of sync this wya.

Quoted 6 lines

Fix that by always reinitializing the global limits upon the registration of the driver.

Fixes fb1fe1041c04 (cpufreq: intel_pstate: Operation mode control

from sysfs)

Quoted 103 lines

---
 drivers/cpufreq/intel_pstate.c |   65 +++++++++++++-----------------
-----------

 1 file changed, 22 insertions(+), 43 deletions(-)

Index: linux-pm/drivers/cpufreq/intel_pstate.c
===================================================================

drivers/cpufreq/intel_pstate.c +0 -0
@@ -364,37 +364,25 @@ static bool driver_registered __read_mos
  static bool acpi_ppc;
  #endif

drivers/cpufreq/intel_pstate.c +3 -12
-static struct perf_limits performance_limits = {
-	.no_turbo = 0,
-	.turbo_disabled = 0,
-	.max_perf_pct = 100,
-	.max_perf = int_ext_tofp(1),
-	.min_perf_pct = 100,
-	.min_perf = int_ext_tofp(1),
-	.max_policy_pct = 100,
-	.max_sysfs_pct = 100,
-	.min_policy_pct = 0,
-	.min_sysfs_pct = 0,
-};
+static struct perf_limits performance_limits;
+static struct perf_limits powersave_limits;
+static struct perf_limits *limits;

drivers/cpufreq/intel_pstate.c +8 -12
-static struct perf_limits powersave_limits = {
-	.no_turbo = 0,
-	.turbo_disabled = 0,
-	.max_perf_pct = 100,
-	.max_perf = int_ext_tofp(1),
-	.min_perf_pct = 0,
-	.min_perf = 0,
-	.max_policy_pct = 100,
-	.max_sysfs_pct = 100,
-	.min_policy_pct = 0,
-	.min_sysfs_pct = 0,
-};
+static void intel_pstate_init_limits(struct perf_limits *limits)
+{
+	memset(limits, 0, sizeof(*limits));
+	limits->max_perf_pct = 100;
+	limits->max_perf = int_ext_tofp(1);
+	limits->max_policy_pct = 100;
+	limits->max_sysfs_pct = 100;
+}

drivers/cpufreq/intel_pstate.c +1 -5
-#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
-static struct perf_limits *limits = &performance_limits;
-#else
-static struct perf_limits *limits = &powersave_limits;
-#endif
+static void intel_pstate_set_performance_limits(struct perf_limits

*limits)

drivers/cpufreq/intel_pstate.c +5 -0
+{
+	intel_pstate_init_limits(limits);
+	limits->min_perf_pct = 100;
+	limits->min_perf = int_ext_tofp(1);
+}


 static DEFINE_MUTEX(intel_pstate_driver_lock);
 static DEFINE_MUTEX(intel_pstate_limits_lock);

drivers/cpufreq/intel_pstate.c +0 -0
@@ -2084,20 +2072,6 @@ static void intel_pstate_clear_update_ut
  	synchronize_sched();
  }


-static void intel_pstate_set_performance_limits(struct perf_limits *limits)

drivers/cpufreq/intel_pstate.c +0 -13
-{
-	limits->no_turbo = 0;
-	limits->turbo_disabled = 0;
-	limits->max_perf_pct = 100;
-	limits->max_perf = int_ext_tofp(1);
-	limits->min_perf_pct = 100;
-	limits->min_perf = int_ext_tofp(1);
-	limits->max_policy_pct = 100;
-	limits->max_sysfs_pct = 100;
-	limits->min_policy_pct = 0;
-	limits->min_sysfs_pct = 0;
-}
-

 static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy,
      struct perf_limits *limits)
 {

drivers/cpufreq/intel_pstate.c +0 -0
@@ -2466,6 +2440,11 @@ static int intel_pstate_register_driver(
  {
  	int ret;

drivers/cpufreq/intel_pstate.c +3 -0
+	intel_pstate_init_limits(&powersave_limits);
+	intel_pstate_set_performance_limits(&performance_limits);
+	limits = IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE)

?

drivers/cpufreq/intel_pstate.c +2 -0
+			&performance_limits : &powersave_limits;
+

  ret = cpufreq_register_driver(intel_pstate_driver); if (ret) {
  intel_pstate_driver_cleanup();