Skip to contentSkip to conversation

arm: boards: phytec-som-am335x: Remove 1GB RAM type

PATCH Applied Daniel Schultz 2 participants 2 messages Mar 1, 2017

Subsystems (2)
Arm (32-bit) Arm/actions semi architecture
lore
Share & tools
lore

Daniel Schultz

author
#0 lore raw

PATCH v2 1/1 arm: boards: phytec-som-am335x: Remove 1GB RAM type

This machine was a prototype and was never shipped to customers.

Since it has no dependencies to any image, it can be removed.

Signed-off-by Daniel Schultz <[email protected]>

---
Changes:
v2: Removed machine in Makefile

 arch/arm/boards/phytec-som-am335x/lowlevel.c    |  1 -
 arch/arm/boards/phytec-som-am335x/ram-timings.h | 21 ---------------------
 images/Makefile.am33xx                          |  6 ------
 3 files changed, 28 deletions(-)
arch/arm/boards/phytec-som-am335x/lowlevel.c +0 -1
index 33e83c5..03c7e98 100644
@@ -122,7 +122,6 @@ PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_128mb, am335x_phytec_phycore_s
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J128M16125IT_256MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J256M16HA15EIT_512MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_2x512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J512M8125IT_2x512MB);
-PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_1024mb, am335x_phytec_phycore_som_mlo, PHYCORE_IM8G16D3FBBG15EI_1024MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K256M16TW107IT_512MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K128M16JT_256MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_1024mb,  am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K512M16HA125IT_1024MB);
arch/arm/boards/phytec-som-am335x/ram-timings.h +0 -21
index 4ea654d..d1947b5 100644
@@ -29,7 +29,6 @@ enum {
 	PHYCORE_MT41J64M1615IT_128MB,
 	PHYCORE_MT41J256M16HA15EIT_512MB,
 	PHYCORE_MT41J512M8125IT_2x512MB,
-	PHYCORE_IM8G16D3FBBG15EI_1024MB,
 	PHYCORE_R2_MT41K256M16TW107IT_512MB,
 	PHYCORE_R2_MT41K128M16JT_256MB,
 	PHYCORE_R2_MT41K512M16HA125IT_1024MB,

@@ -162,26 +161,6 @@ struct am335x_sdram_timings physom_timings[] = {
 		},
 	},
 
-	/* 1024MB */
-	[PHYCORE_IM8G16D3FBBG15EI_1024MB] = {
-		.regs = {
-			.emif_read_latency	= 0x7,
-			.emif_tim1		= 0x0AAAE4DB,
-			.emif_tim2		= 0x268F7FDA,
-			.emif_tim3		= 0x501F88BF,
-			.ocp_config		= 0x003d3d3d,
-			.sdram_config		= 0x61C053B2,
-			.zq_config		= 0x50074BE4,
-			.sdram_ref_ctrl		= 0x00000C30
-		},
-		.data = {
-			.rd_slave_ratio0	= 0x33,
-			.wr_dqs_slave_ratio0	= 0x4a,
-			.fifo_we_slave_ratio0	= 0xa4,
-			.wr_slave_ratio0	= 0x85,
-		},
-	},
-
 	/* 256MB */
 	[PHYCARD_NT5CB128M16BP_256MB] = {
 		.regs = {
images/Makefile.am33xx +0 -6
index 8168fe4..d1c432e 100644
@@ -77,12 +77,6 @@ FILE_barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img = start_am33xx_phytec_phy
 am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.img
 am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img
 
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_1024mb
-FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlo
-FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlospi
-am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.img
-am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img
-
 pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_r2_sram_1024mb
 FILE_barebox-am33xx-phytec-phycore-r2-mlo-1024mb.img = start_am33xx_phytec_phycore_r2_sram_1024mb.pblx.mlo
 FILE_barebox-am33xx-phytec-phycore-r2-mlo-1024mb.spi.img = start_am33xx_phytec_phycore_r2_sram_1024mb.pblx.mlospi
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 8 lines · Daniel Schultz

This machine was a prototype and was never shipped to customers.

Since it has no dependencies to any image, it can be removed.

Signed-off-by Daniel Schultz <[email protected]>

---
Changes:
v2: Removed machine in Makefile

Applied, thanks

Sascha

Quoted 83 lines
 arch/arm/boards/phytec-som-am335x/lowlevel.c    |  1 -
 arch/arm/boards/phytec-som-am335x/ram-timings.h | 21 ---------------------
 images/Makefile.am33xx                          |  6 ------
 3 files changed, 28 deletions(-)
arch/arm/boards/phytec-som-am335x/lowlevel.c +0 -1
index 33e83c5..03c7e98 100644
@@ -122,7 +122,6 @@ PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_128mb, am335x_phytec_phycore_s
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J128M16125IT_256MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J256M16HA15EIT_512MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_2x512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J512M8125IT_2x512MB);
-PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_1024mb, am335x_phytec_phycore_som_mlo, PHYCORE_IM8G16D3FBBG15EI_1024MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K256M16TW107IT_512MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K128M16JT_256MB);
 PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_1024mb,  am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K512M16HA125IT_1024MB);
arch/arm/boards/phytec-som-am335x/ram-timings.h +0 -21
index 4ea654d..d1947b5 100644
@@ -29,7 +29,6 @@ enum {
 	PHYCORE_MT41J64M1615IT_128MB,
 	PHYCORE_MT41J256M16HA15EIT_512MB,
 	PHYCORE_MT41J512M8125IT_2x512MB,
-	PHYCORE_IM8G16D3FBBG15EI_1024MB,
 	PHYCORE_R2_MT41K256M16TW107IT_512MB,
 	PHYCORE_R2_MT41K128M16JT_256MB,
 	PHYCORE_R2_MT41K512M16HA125IT_1024MB,

@@ -162,26 +161,6 @@ struct am335x_sdram_timings physom_timings[] = {
 		},
 	},
 
-	/* 1024MB */
-	[PHYCORE_IM8G16D3FBBG15EI_1024MB] = {
-		.regs = {
-			.emif_read_latency	= 0x7,
-			.emif_tim1		= 0x0AAAE4DB,
-			.emif_tim2		= 0x268F7FDA,
-			.emif_tim3		= 0x501F88BF,
-			.ocp_config		= 0x003d3d3d,
-			.sdram_config		= 0x61C053B2,
-			.zq_config		= 0x50074BE4,
-			.sdram_ref_ctrl		= 0x00000C30
-		},
-		.data = {
-			.rd_slave_ratio0	= 0x33,
-			.wr_dqs_slave_ratio0	= 0x4a,
-			.fifo_we_slave_ratio0	= 0xa4,
-			.wr_slave_ratio0	= 0x85,
-		},
-	},
-
 	/* 256MB */
 	[PHYCARD_NT5CB128M16BP_256MB] = {
 		.regs = {
images/Makefile.am33xx +0 -6
index 8168fe4..d1c432e 100644
@@ -77,12 +77,6 @@ FILE_barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img = start_am33xx_phytec_phy
 am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.img
 am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.spi.img
 
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_1024mb
-FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlo
-FILE_barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img = start_am33xx_phytec_phycore_sram_1024mb.pblx.mlospi
-am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.img
-am33xx-mlospi-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-1024mb.spi.img
-
 pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_r2_sram_1024mb
 FILE_barebox-am33xx-phytec-phycore-r2-mlo-1024mb.img = start_am33xx_phytec_phycore_r2_sram_1024mb.pblx.mlo
 FILE_barebox-am33xx-phytec-phycore-r2-mlo-1024mb.spi.img = start_am33xx_phytec_phycore_r2_sram_1024mb.pblx.mlospi
Signature · 7 lines
1.9.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox