Skip to contentSkip to conversation

arm: socfpga: Enable EFI support for DE0-nano-SoC disto boot

PATCH Superseded Frank Kunz 3 participants 10 messages Mar 5, 2017 – Mar 7, 2017

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Frank Kunz

author
#0 lore raw

cover arm: socfpga: Enable EFI support for DE0-nano-SoC disto boot

This enables EFI support for DE0-nano-SoC distro boot.

The patches will apply on top of Dalon Westergreens "[PATCH v3 0/8] arm: socfpga: Move to using distro boot" series.

Tested on openSUSE openSUSE Tumbleweed ARM JeOS image.

Signed-off-by Frank Kunz <[email protected]>

Frank Kunz (2):
arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC
arm: socfpga: Enable part command and EFI partition support for
DE0-nano-SoC

 configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
 include/configs/socfpga_de0_nano_soc.h | 2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)

--
2.11.0

author
#1 lore raw

PATCH 1/2 arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC

This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_de0_nano_soc.h

 include/configs/socfpga_de0_nano_soc.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/socfpga_de0_nano_soc.h +2 -0
index dd5933d43c..bd3e83ddea 100644
@@ -12,6 +12,8 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */
Signature · 1 line
2.11.0
#2 lore raw

PATCH 1/2 arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC

Quoted 17 lines · Frank Kunz

This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_de0_nano_soc.h

 include/configs/socfpga_de0_nano_soc.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/socfpga_de0_nano_soc.h +0 -0
index dd5933d43c..bd3e83ddea 100644

include/configs/socfpga_de0_nano_soc.h line 19

Quoted 8 lines
include/configs/socfpga_de0_nano_soc.h +2 -0
@@ -12,6 +12,8 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */

This looks like a horrid hack , didn't Dalon add support into U-Boot SPL to scan all partitions for the final u-boot image ?

#3 lore raw

PATCH 1/2 arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC

Quoted 23 lines · Marek Vasut
Quoted 22 lines · Frank Kunz

This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_
de0_nano_soc.h
 include/configs/socfpga_de0_nano_soc.h | 2 ++

 1 file changed, 2 insertions(+)
include/configs/socfpga_de0_nano_soc.h +0 -0
index dd5933d43c..bd3e83ddea 100644
@@ -12,6 +12,8 @@
  #define CONFIG_FAT_WRITE
  #define CONFIG_HW_WATCHDOG
Quoted 8 lines

include/configs/socfpga_de0_nano_soc.h line 19

Quoted 6 lines
include/configs/socfpga_de0_nano_soc.h +2 -0
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
  /* Memory configurations */
  #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */

This looks like a horrid hack , didn't Dalon add support into U-Boot SPL to scan all partitions for the final u-boot image ?

I did.  The 0xA2 partition can be located on any partition number now.  I believe Frank places the SPL image at a 64KB offset from the start of the sdcard to skip the MBR/GPT.  But per our previous debate, it is not my favored implementation as it relies on the bootrom to load the SPL once.

Also, i mentioned before that i would like to hold off on this patch set and let Ley Foon et al finish the A10 stuff.

--dalon

Quoted 4 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/listinfo/u-boot

#4 lore raw

PATCH 1/2 arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC

Quoted 33 lines · Dalon Westergreen
Quoted 23 lines · Marek Vasut
Quoted 22 lines · Frank Kunz

This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_
de0_nano_soc.h

 include/configs/socfpga_de0_nano_soc.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/socfpga_de0_nano_soc.h +0 -0
index dd5933d43c..bd3e83ddea 100644
@@ -12,6 +12,8 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
Quoted 8 lines

include/configs/socfpga_de0_nano_soc.h line 19

Quoted 6 lines
include/configs/socfpga_de0_nano_soc.h +2 -0
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */

This looks like a horrid hack , didn't Dalon add support into U-Boot SPL to scan all partitions for the final u-boot image ?

Quoted 7 lines

I did. The 0xA2 partition can be located on any partition number now. I believe Frank places the SPL image at a 64KB offset from the start of the sdcard to skip the MBR/GPT. But per our previous debate, it is not my favored implementation as it relies on the bootrom to load the SPL once.

Also, i mentioned before that i would like to hold off on this patch set and let Ley Foon et al finish the A10 stuff.

OK, although I think the A10 will take a bit longer, so there's no point in blocking this simple(r) patchset ... just don't wind up in deadlock ...

author
#5 lore raw

PATCH 1/2 arm: socfpga: Enable abort for DE-nano-SoC SPL uboot load from MMC

In reply to Dalon Westergreen

Am 05.03.2017 um 18:36 schrieb Dalon Westergreen:

Quoted 33 lines · Marek Vasut
Quoted 23 lines · Frank Kunz
Quoted 22 lines

This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_
de0_nano_soc.h

 include/configs/socfpga_de0_nano_soc.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/socfpga_de0_nano_soc.h +0 -0
index dd5933d43c..bd3e83ddea 100644
@@ -12,6 +12,8 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
Quoted 8 lines

include/configs/socfpga_de0_nano_soc.h line 19

Quoted 6 lines
include/configs/socfpga_de0_nano_soc.h +2 -0
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */

This looks like a horrid hack , didn't Dalon add support into U-Boot SPL to scan all partitions for the final u-boot image ?

Quoted 4 lines

I did. The 0xA2 partition can be located on any partition number now. I believe Frank places the SPL image at a 64KB offset from the start of the sdcard to skip the MBR/GPT. But per our previous debate, it is not my favored implementation as it relies on the bootrom to load the SPL once.

I put the u-boot at 4x64kiB (sector 0x200) offset on the sdcard. With CONFIG_SPL_ABORT_ON_RAW_IMAGE config enabled the spl scans first for the configured partition in the partition table as implemented by Dalon, if that fails it tries to find the u-boot at sector 0x200 (as configured by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR). Without that config the spl endless retries to find u-boot in the configured partition, which is not there when using GPT.

Quoted 11 lines

Also, i mentioned before that i would like to hold off on this patch set and let Ley Foon et al finish the A10 stuff.

--dalon

Quoted 4 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/listinfo/u-boot

author
#6 lore raw

PATCH 2/2 arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

In reply to Frank Kunz

Those features are used by distro boot with efi boot.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 b122135690... c22b54b48d... M configs/socfpga_de0_nano_soc_defconfig

 configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
configs/socfpga_de0_nano_soc_defconfig +4 -3
index b122135690..c22b54b48d 100644
@@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
-CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y

@@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y

@@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y

@@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USE_TINY_PRINTF=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
\ No newline at end of file
Signature · 1 line
2.11.0
#7 lore raw

PATCH 2/2 arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

Quoted 13 lines · Frank Kunz

Those features are used by distro boot with efi boot.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 b122135690... c22b54b48d... M configs/socfpga_de0_nano_soc_defconfig

 configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
configs/socfpga_de0_nano_soc_defconfig +0 -0
index b122135690..c22b54b48d 100644

configs/socfpga_de0_nano_soc_defconfig CONFIG_SYS_MALLOC_F_LEN=0x2000 · line 11

Quoted 9 lines
configs/socfpga_de0_nano_soc_defconfig +1 -1
@@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
-CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"

Is this move needed ? (no, it's not)

Quoted 21 lines
configs/socfpga_de0_nano_soc_defconfig +3 -0
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y

@@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y

@@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y

configs/socfpga_de0_nano_soc_defconfig CONFIG_G_DNL_MANUFACTURER="terasic" · line 63

Quoted 5 lines
configs/socfpga_de0_nano_soc_defconfig +0 -2
@@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USE_TINY_PRINTF=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2

+CC Dalon ...

Quoted 2 lines

\ No newline at end of file

author
#8 lore raw

PATCH 2/2 arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

Am 05.03.2017 um 18:17 schrieb Marek Vasut:

Quoted 19 lines · Frank Kunz
Quoted 18 lines

Those features are used by distro boot with efi boot.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 b122135690... c22b54b48d... M
configs/socfpga_de0_nano_soc_defconfig

 configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
configs/socfpga_de0_nano_soc_defconfig +0 -0
index b122135690..c22b54b48d 100644
@@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
Quoted 8 lines

configs/socfpga_de0_nano_soc_defconfig CONFIG_SYS_MALLOC_F_LEN=0x2000 · line 11

Quoted 6 lines
configs/socfpga_de0_nano_soc_defconfig +1 -1
-CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"

Is this move needed ? (no, it's not)

It is not needed, but "make savedefconfig" decided to do that. I do not know how to overcome it.

Quoted 21 lines
Quoted 21 lines
configs/socfpga_de0_nano_soc_defconfig +3 -0
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y

@@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y

@@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
Quoted 8 lines

configs/socfpga_de0_nano_soc_defconfig CONFIG_G_DNL_MANUFACTURER="terasic" · line 63

Quoted 6 lines
configs/socfpga_de0_nano_soc_defconfig +0 -2
@@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USE_TINY_PRINTF=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2

+CC Dalon ...

Similar case here. "make savedefconfig" found that those two parameters are already set by arch/arm/mach-socfpga/Kconfig and decided to remove them here, I guess.

Quoted 5 lines
Quoted 3 lines

\ No newline at end of file

#9 lore raw

PATCH 2/2 arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

Quoted 29 lines · Frank Kunz

Am 05.03.2017 um 18:17 schrieb Marek Vasut:

Quoted 19 lines · Frank Kunz
Quoted 18 lines

Those features are used by distro boot with efi boot.

Signed-off-by Frank Kunz <[email protected]>

---
:100644 100644 b122135690... c22b54b48d... M
configs/socfpga_de0_nano_soc_defconfig

 configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
configs/socfpga_de0_nano_soc_defconfig +0 -0
index b122135690..c22b54b48d 100644
@@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
Quoted 8 lines

configs/socfpga_de0_nano_soc_defconfig CONFIG_SYS_MALLOC_F_LEN=0x2000 · line 11

Quoted 6 lines
configs/socfpga_de0_nano_soc_defconfig +1 -1
-CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"

Is this move needed ? (no, it's not)

Quoted 2 lines

It is not needed, but "make savedefconfig" decided to do that. I do not know how to overcome it.

Try git checkout -p to selectively clear bits from the changes. Or git add -p ...

Quoted 40 lines
Quoted 21 lines
Quoted 21 lines
configs/socfpga_de0_nano_soc_defconfig +3 -0
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y

@@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y

@@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
Quoted 8 lines

configs/socfpga_de0_nano_soc_defconfig CONFIG_G_DNL_MANUFACTURER="terasic" · line 63

Quoted 6 lines
configs/socfpga_de0_nano_soc_defconfig +0 -2
@@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USE_TINY_PRINTF=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2

+CC Dalon ...

Similar case here. "make savedefconfig" found that those two parameters are already set by arch/arm/mach-socfpga/Kconfig and decided to remove them here, I guess.

Quoted 5 lines
Quoted 3 lines

\ No newline at end of file