Skip to contentSkip to conversation

Patch "[media] dw2102: don't do DMA on stack" has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Mar 15, 2017

Subsystems (2)
Stable branch Media (V4L/DVB)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

[media] dw2102: don't do DMA on stack

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     dw2102-don-t-do-dma-on-stack.patch

and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 606142af57dad981b78707234cfbd15f9f7b7125 Mon Sep 17 00:00:00 2001

From: Jonathan McDowell <[email protected]>
Date: Wed, 15 Feb 2017 18:29:15 -0200
Subject: [media] dw2102: don't do DMA on stack

From: Jonathan McDowell <[email protected]>

commit 606142af57dad981b78707234cfbd15f9f7b7125 upstream.

On Kernel 4.9, WARNINGs about doing DMA on stack are hit at
the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach().

Both were due to the use of buffers on the stack as parameters to dvb_usb_generic_rw() and the resulting attempt to do DMA with them.

The device was non-functional as a result.

So, switch this driver over to use a buffer within the device state structure, as has been done with other DVB-USB drivers.

Tested with TechnoTrend TT-connect S2-4600.

[[email protected]: fixed a warning at su3000_i2c_transfer() that
state var were dereferenced before check 'd']

Signed-off-by Jonathan McDowell <[email protected]>
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/media/usb/dvb-usb/dw2102.c |  242 ++++++++++++++++++++++---------------
 1 file changed, 144 insertions(+), 98 deletions(-)
drivers/media/usb/dvb-usb/dw2102.c +144 -98
@@ -68,6 +68,7 @@
 struct dw2102_state {
 	u8 initialized;
 	u8 last_lock;
+	u8 data[MAX_XFER_SIZE + 4];
 	struct i2c_client *i2c_client_demod;
 	struct i2c_client *i2c_client_tuner;
 

@@ -662,62 +663,72 @@ static int su3000_i2c_transfer(struct i2
 								int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	u8 obuf[0x40], ibuf[0x40];
+	struct dw2102_state *state;
 
 	if (!d)
 		return -ENODEV;
+
+	state = d->priv;
+
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
+	if (mutex_lock_interruptible(&d->data_mutex) < 0) {
+		mutex_unlock(&d->i2c_mutex);
+		return -EAGAIN;
+	}
 
 	switch (num) {
 	case 1:
 		switch (msg[0].addr) {
 		case SU3000_STREAM_CTRL:
-			obuf[0] = msg[0].buf[0] + 0x36;
-			obuf[1] = 3;
-			obuf[2] = 0;
-			if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0)
+			state->data[0] = msg[0].buf[0] + 0x36;
+			state->data[1] = 3;
+			state->data[2] = 0;
+			if (dvb_usb_generic_rw(d, state->data, 3,
+					state->data, 0, 0) < 0)
 				err("i2c transfer failed.");
 			break;
 		case DW2102_RC_QUERY:
-			obuf[0] = 0x10;
-			if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
+			state->data[0] = 0x10;
+			if (dvb_usb_generic_rw(d, state->data, 1,
+					state->data, 2, 0) < 0)
 				err("i2c transfer failed.");
-			msg[0].buf[1] = ibuf[0];
-			msg[0].buf[0] = ibuf[1];
+			msg[0].buf[1] = state->data[0];
+			msg[0].buf[0] = state->data[1];
 			break;
 		default:
 			/* always i2c write*/
-			obuf[0] = 0x08;
-			obuf[1] = msg[0].addr;
-			obuf[2] = msg[0].len;
+			state->data[0] = 0x08;
+			state->data[1] = msg[0].addr;
+			state->data[2] = msg[0].len;
 
-			memcpy(&obuf[3], msg[0].buf, msg[0].len);
+			memcpy(&state->data[3], msg[0].buf, msg[0].len);
 
-			if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3,
-						ibuf, 1, 0) < 0)
+			if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3,
+						state->data, 1, 0) < 0)
 				err("i2c transfer failed.");
 
 		}
 		break;
 	case 2:
 		/* always i2c read */
-		obuf[0] = 0x09;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[1].len;
-		obuf[3] = msg[0].addr;
-		memcpy(&obuf[4], msg[0].buf, msg[0].len);
+		state->data[0] = 0x09;
+		state->data[1] = msg[0].len;
+		state->data[2] = msg[1].len;
+		state->data[3] = msg[0].addr;
+		memcpy(&state->data[4], msg[0].buf, msg[0].len);
 
-		if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4,
-					ibuf, msg[1].len + 1, 0) < 0)
+		if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4,
+					state->data, msg[1].len + 1, 0) < 0)
 			err("i2c transfer failed.");
 
-		memcpy(msg[1].buf, &ibuf[1], msg[1].len);
+		memcpy(msg[1].buf, &state->data[1], msg[1].len);
 		break;
 	default:
 		warn("more than 2 i2c messages at a time is not handled yet.");
 		break;
 	}
+	mutex_unlock(&d->data_mutex);
 	mutex_unlock(&d->i2c_mutex);
 	return num;
 }

@@ -845,17 +856,23 @@ static int su3000_streaming_ctrl(struct
 static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
 {
 	struct dw2102_state *state = (struct dw2102_state *)d->priv;
-	u8 obuf[] = {0xde, 0};
+	int ret = 0;
 
 	info("%s: %d, initialized %d", __func__, i, state->initialized);
 
 	if (i && !state->initialized) {
+		mutex_lock(&d->data_mutex);
+
+		state->data[0] = 0xde;
+		state->data[1] = 0;
+
 		state->initialized = 1;
 		/* reset board */
-		return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
+		ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0);
+		mutex_unlock(&d->data_mutex);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])

@@ -1310,49 +1327,57 @@ static int prof_7500_frontend_attach(str
 	return 0;
 }
 
-static int su3000_frontend_attach(struct dvb_usb_adapter *d)
+static int su3000_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[3] = { 0xe, 0x80, 0 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0;
+
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x02;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x02;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 	msleep(300);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
-					&d->dev->i2c_adap);
-	if (d->fe_adap[0].fe == NULL)
+	mutex_unlock(&d->data_mutex);
+
+	adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
+					&d->i2c_adap);
+	if (adap->fe_adap[0].fe == NULL)
 		return -EIO;
 
-	if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+	if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
 				&dw2104_ts2020_config,
-				&d->dev->i2c_adap)) {
+				&d->i2c_adap)) {
 		info("Attached DS3000/TS2020!");
 		return 0;
 	}

@@ -1361,47 +1386,55 @@ static int su3000_frontend_attach(struct
 	return -EIO;
 }
 
-static int t220_frontend_attach(struct dvb_usb_adapter *d)
+static int t220_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[3] = { 0xe, 0x87, 0 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	state->data[0] = 0xe;
+	state->data[1] = 0x87;
+	state->data[2] = 0x0;
+
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x86;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x86;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x80;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
 	msleep(50);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x80;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
-					&d->dev->i2c_adap, NULL);
-	if (d->fe_adap[0].fe != NULL) {
-		if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60,
-					&d->dev->i2c_adap, &tda18271_config)) {
+	mutex_unlock(&d->data_mutex);
+
+	adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
+					&d->i2c_adap, NULL);
+	if (adap->fe_adap[0].fe != NULL) {
+		if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60,
+					&d->i2c_adap, &tda18271_config)) {
 			info("Attached TDA18271HD/CXD2820R!");
 			return 0;
 		}

@@ -1411,23 +1444,30 @@ static int t220_frontend_attach(struct d
 	return -EIO;
 }
 
-static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d)
+static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[] = { 0x51 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	state->data[0] = 0x51;
+
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config,
-					&d->dev->i2c_adap);
+	mutex_unlock(&d->data_mutex);
 
-	if (d->fe_adap[0].fe == NULL)
+	adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach,
+					&s421_m88rs2000_config,
+					&d->i2c_adap);
+
+	if (adap->fe_adap[0].fe == NULL)
 		return -EIO;
 
-	if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+	if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
 				&dw2104_ts2020_config,
-				&d->dev->i2c_adap)) {
+				&d->i2c_adap)) {
 		info("Attached RS2000/TS2020!");
 		return 0;
 	}

@@ -1440,44 +1480,50 @@ static int tt_s2_4600_frontend_attach(st
 {
 	struct dvb_usb_device *d = adap->dev;
 	struct dw2102_state *state = d->priv;
-	u8 obuf[3] = { 0xe, 0x80, 0 };
-	u8 ibuf[] = { 0 };
 	struct i2c_adapter *i2c_adapter;
 	struct i2c_client *client;
 	struct i2c_board_info board_info;
 	struct m88ds3103_platform_data m88ds3103_pdata = {};
 	struct ts2020_config ts2020_config = {};
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	mutex_lock(&d->data_mutex);
+
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0x0;
+
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x02;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x02;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 	msleep(300);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
+	mutex_unlock(&d->data_mutex);
+
 	/* attach demod */
 	m88ds3103_pdata.clk = 27000000;
 	m88ds3103_pdata.i2c_wr_max = 33;

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/dw2102-don-t-do-dma-on-stack.patch