Patch "amd-xgbe: Enable IRQs only if napi_complete_done() is true" has been added to the 4.10-stable tree

This is a note to let you know that I've just added the patch titled

amd-xgbe: Enable IRQs only if napi_complete_done() is true

to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
amd-xgbe-enable-irqs-only-if-napi_complete_done-is-true.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: "Lendacky, Thomas" <[email protected]>
Date: Thu, 9 Mar 2017 17:48:23 -0600
Subject: amd-xgbe: Enable IRQs only if napi_complete_done() is true

From: "Lendacky, Thomas" <[email protected]>

[ Upstream commit d7aba644ffdebf756e51e26a2229055211838e89 ]

Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync() and enable_irq() when an interrupt is received to process Rx packets. If the napi_complete_done() return value isn't checked an unbalanced enable for the IRQ could result, generating a warning stack trace.

Update the driver to only enable interrupts if napi_complete_done() returns true.

---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

@@ -2274,10 +2274,7 @@ static int xgbe_one_poll(struct napi_str
 	processed = xgbe_rx_poll(channel, budget);
 
 	/* If we processed everything, we are done */
-	if (processed < budget) {
-		/* Turn off polling */
-		napi_complete_done(napi, processed);
-
+	if ((processed < budget) && napi_complete_done(napi, processed)) {
 		/* Enable Tx and Rx interrupts */
 		if (pdata->channel_irq_mode)
 			xgbe_enable_rx_tx_int(pdata, channel);

@@ -2319,10 +2316,7 @@ static int xgbe_all_poll(struct napi_str
 	} while ((processed < budget) && (processed != last_processed));
 
 	/* If we processed everything, we are done */
-	if (processed < budget) {
-		/* Turn off polling */
-		napi_complete_done(napi, processed);
-
+	if ((processed < budget) && napi_complete_done(napi, processed)) {
 		/* Enable Tx and Rx interrupts */
 		xgbe_enable_rx_tx_ints(pdata);
 	}

Patches currently in stable-queue which might be from [email protected] are

queue-4.10/amd-xgbe-be-sure-to-set-mdio-modes-on-device-re-start.patch queue-4.10/amd-xgbe-enable-irqs-only-if-napi_complete_done-is-true.patch queue-4.10/amd-xgbe-don-t-overwrite-sfp-phy-mod_absent-settings.patch queue-4.10/amd-xgbe-stop-the-phy-before-releasing-interrupts.patch