Skip to contentSkip to conversation

Various improvements around the GuC topic

PATCH In review Oscar Mateo 4 participants 22 messages Mar 23, 2017 – Mar 28, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Various improvements around the GuC topic

Another go at it.

Joonas Lahtinen (1):
drm/i915/guc: Sanitize GuC client initialization

Oscar Mateo (12):
drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access drm/i915/guc: Add onion teardown to the GuC setup drm/i915/guc: The Additional Data Struct (ADS) should get enabled
together with GuC submission
drm/i915/guc: Break out the GuC log extras into their own "runtime"
struct
drm/i915/guc: Make intel_guc_send a function pointer drm/i915/guc: Improve the GuC documentation & comments about proxy
submissions
drm/i915/guc: Wait for doorbell to be inactive before deallocating drm/i915/guc: A little bit more of doorbell sanitization drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC
stage descriptor"
drm/i915/guc: Split out the mmio_white_list struct drm/i915/guc: Move guc_interrupts_release next to
guc_interrupts_capture
HAX Enable GuC loading & submission

 drivers/gpu/drm/i915/i915_debugfs.c        |   8 +-
 drivers/gpu/drm/i915/i915_drv.c            |  11 +-
 drivers/gpu/drm/i915/i915_gem.c            |  10 +-
 drivers/gpu/drm/i915/i915_guc_submission.c | 787 +++++++++++++++++------------
 drivers/gpu/drm/i915/i915_irq.c            |   4 +-
 drivers/gpu/drm/i915/i915_params.c         |   8 +-
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  71 +--
 drivers/gpu/drm/i915/intel_guc_loader.c    |  33 +-
 drivers/gpu/drm/i915/intel_guc_log.c       | 386 +++++++-------
 drivers/gpu/drm/i915/intel_uc.c            |  62 ++-
 drivers/gpu/drm/i915/intel_uc.h            |  51 +-
 11 files changed, 793 insertions(+), 638 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v5 1/13 drm/i915/guc: Sanitize GuC client initialization

From: Joonas Lahtinen <[email protected]>

Started adding proper teardown to guc_client_alloc, ended up removing quite a few dead ends where errors communicating with the GuC were silently ignored. There also seemed to be quite a few erronous teardown actions performed in case of an error (ordering wrong).

v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)

v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so move the whole doorbell creation for execbuf_client to the submission enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.

v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)

v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)

---
 drivers/gpu/drm/i915/i915_debugfs.c        |   4 +-
 drivers/gpu/drm/i915/i915_guc_submission.c | 398 ++++++++++++++++-------------
 drivers/gpu/drm/i915/intel_guc_fwif.h      |   4 +-
 drivers/gpu/drm/i915/intel_uc.h            |  11 +-
 4 files changed, 233 insertions(+), 184 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
index 47e707d..061f8a5 100644
@@ -2476,7 +2476,7 @@ static void i915_guc_client_info(struct seq_file *m,
 
 	seq_printf(m, "\tPriority %d, GuC ctx index: %u, PD offset 0x%x\n",
 		client->priority, client->ctx_index, client->proc_desc_offset);
-	seq_printf(m, "\tDoorbell id %d, offset: 0x%x, cookie 0x%x\n",
+	seq_printf(m, "\tDoorbell id %d, offset: 0x%lx, cookie 0x%x\n",
 		client->doorbell_id, client->doorbell_offset, client->doorbell_cookie);
 	seq_printf(m, "\tWQ size %d, offset: 0x%x, tail %d\n",
 		client->wq_size, client->wq_offset, client->wq_tail);
@@ -2511,7 +2511,7 @@ static int i915_guc_info(struct seq_file *m, void *data)
 	}
 
 	seq_printf(m, "Doorbell map:\n");
-	seq_printf(m, "\t%*pb\n", GUC_MAX_DOORBELLS, guc->doorbell_bitmap);
+	seq_printf(m, "\t%*pb\n", GUC_NUM_DOORBELLS, guc->doorbell_bitmap);
 	seq_printf(m, "Doorbell next cacheline: 0x%x\n\n", guc->db_cacheline);
 
 	seq_printf(m, "GuC total action count: %llu\n", guc->action_count);
drivers/gpu/drm/i915/i915_guc_submission.c +224 -174

588 lines not on this page · raw message

drivers/gpu/drm/i915/intel_guc_fwif.h +2 -2
index 25691f0..3ae8cef 100644
@@ -241,8 +241,8 @@ struct guc_doorbell_info {
 	u64 value_qw;
 } __packed;
 
-#define GUC_MAX_DOORBELLS		256
-#define GUC_INVALID_DOORBELL_ID		(GUC_MAX_DOORBELLS)
+#define GUC_NUM_DOORBELLS	256
+#define GUC_DOORBELL_INVALID	(GUC_NUM_DOORBELLS)
 
 #define GUC_DB_SIZE			(PAGE_SIZE)
 #define GUC_WQ_SIZE			(PAGE_SIZE * 2)
drivers/gpu/drm/i915/intel_uc.h +5 -6
index a35eded..c3a3843 100644
@@ -72,13 +72,12 @@ struct i915_guc_client {
 
 	uint32_t engines;		/* bitmap of (host) engine ids	*/
 	uint32_t priority;
-	uint32_t ctx_index;
+	u32 ctx_index;
 	uint32_t proc_desc_offset;
 
-	uint32_t doorbell_offset;
-	uint32_t doorbell_cookie;
-	uint16_t doorbell_id;
-	uint16_t padding[3];		/* Maintain alignment		*/
+	u16 doorbell_id;
+	unsigned long doorbell_offset;
+	u32 doorbell_cookie;
 
 	spinlock_t wq_lock;
 	uint32_t wq_offset;
@@ -159,7 +158,7 @@ struct intel_guc {
 
 	struct i915_guc_client *execbuf_client;
 
-	DECLARE_BITMAP(doorbell_bitmap, GUC_MAX_DOORBELLS);
+	DECLARE_BITMAP(doorbell_bitmap, GUC_NUM_DOORBELLS);
 	uint32_t db_cacheline;		/* Cyclic counter mod pagesize	*/
 
 	/* Action status & statistics */
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v5 2/13 drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access

In reply to Oscar Mateo

The GuC descriptor is big in size. If we use a local definition of guc_desc we have a chance to overflow stack, so avoid it.

Also, Chris abhors scatterlists :)

v2: Rebased, helper function to retrieve the context descriptor, s/ctx_pool_vma/ctx_pool/

v3: Zero out guc_context_desc before initialization

v4: Do not do arithmetic on void pointers (Daniele)

v5: Nicer than arithmetic on pointers (Chris, Joonas)

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 94 +++++++++++++++---------------
 drivers/gpu/drm/i915/intel_guc_loader.c    |  2 +-
 drivers/gpu/drm/i915/intel_uc.h            |  3 +-
 3 files changed, 49 insertions(+), 50 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +46 -48
index b19753c..d4b2a9b 100644
@@ -133,6 +133,13 @@ static int __guc_deallocate_doorbell(struct intel_guc *guc, u32 ctx_index)
 	return intel_guc_send(guc, action, ARRAY_SIZE(action));
 }
 
+static struct guc_context_desc *__get_context_desc(struct i915_guc_client *client)
+{
+	struct guc_context_desc *base = client->guc->ctx_pool_vaddr;
+
+	return &base[client->ctx_index];
+}
+
 /*
  * Initialise, update, or clear doorbell data shared with the GuC
  *
@@ -142,21 +149,11 @@ static int __guc_deallocate_doorbell(struct intel_guc *guc, u32 ctx_index)
 
 static int __update_doorbell_desc(struct i915_guc_client *client, u16 new_id)
 {
-	struct sg_table *sg = client->guc->ctx_pool_vma->pages;
-	struct guc_context_desc desc;
-	size_t len;
+	struct guc_context_desc *desc;
 
 	/* Update the GuC's idea of the doorbell ID */
-	len = sg_pcopy_to_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
-				 sizeof(desc) * client->ctx_index);
-	if (len != sizeof(desc))
-		return -EFAULT;
-
-	desc.db_id = new_id;
-	len = sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
-				   sizeof(desc) * client->ctx_index);
-	if (len != sizeof(desc))
-		return -EFAULT;
+	desc = __get_context_desc(client);
+	desc->db_id = new_id;
 
 	return 0;
 }
@@ -271,29 +268,28 @@ static void guc_proc_desc_init(struct intel_guc *guc,
  * data structures relating to this client (doorbell, process descriptor,
  * write queue, etc).
  */
-
 static void guc_ctx_desc_init(struct intel_guc *guc,
 			      struct i915_guc_client *client)
 {
 	struct drm_i915_private *dev_priv = guc_to_i915(guc);
 	struct intel_engine_cs *engine;
 	struct i915_gem_context *ctx = client->owner;
-	struct guc_context_desc desc;
-	struct sg_table *sg;
+	struct guc_context_desc *desc;
 	unsigned int tmp;
 	u32 gfx_addr;
 
-	memset(&desc, 0, sizeof(desc));
+	desc = __get_context_desc(client);
+	memset(desc, 0, sizeof(*desc));
 
-	desc.attribute = GUC_CTX_DESC_ATTR_ACTIVE | GUC_CTX_DESC_ATTR_KERNEL;
-	desc.context_id = client->ctx_index;
-	desc.priority = client->priority;
-	desc.db_id = client->doorbell_id;
+	desc->attribute = GUC_CTX_DESC_ATTR_ACTIVE | GUC_CTX_DESC_ATTR_KERNEL;
+	desc->context_id = client->ctx_index;
+	desc->priority = client->priority;
+	desc->db_id = client->doorbell_id;
 
 	for_each_engine_masked(engine, dev_priv, client->engines, tmp) {
 		struct intel_context *ce = &ctx->engine[engine->id];
 		uint32_t guc_engine_id = engine->guc_id;
-		struct guc_execlist_context *lrc = &desc.lrc[guc_engine_id];
+		struct guc_execlist_context *lrc = &desc->lrc[guc_engine_id];
 
 		/* TODO: We have a design issue to be solved here. Only when we
 		 * receive the first batch, we know which engine is used by the
@@ -318,49 +314,40 @@ static void guc_ctx_desc_init(struct intel_guc *guc,
 		lrc->ring_next_free_location = lrc->ring_begin;
 		lrc->ring_current_tail_pointer_value = 0;
 
-		desc.engines_used |= (1 << guc_engine_id);
+		desc->engines_used |= (1 << guc_engine_id);
 	}
 
 	DRM_DEBUG_DRIVER("Host engines 0x%x => GuC engines used 0x%x\n",
-			client->engines, desc.engines_used);
-	WARN_ON(desc.engines_used == 0);
+			client->engines, desc->engines_used);
+	WARN_ON(desc->engines_used == 0);
 
 	/*
 	 * The doorbell, process descriptor, and workqueue are all parts
 	 * of the client object, which the GuC will reference via the GGTT
 	 */
 	gfx_addr = guc_ggtt_offset(client->vma);
-	desc.db_trigger_phy = sg_dma_address(client->vma->pages->sgl) +
+	desc->db_trigger_phy = sg_dma_address(client->vma->pages->sgl) +
 				client->doorbell_offset;
-	desc.db_trigger_cpu = (uintptr_t)__get_doorbell(client);
-	desc.db_trigger_uk = gfx_addr + client->doorbell_offset;
-	desc.process_desc = gfx_addr + client->proc_desc_offset;
-	desc.wq_addr = gfx_addr + client->wq_offset;
-	desc.wq_size = client->wq_size;
+	desc->db_trigger_cpu = (uintptr_t)__get_doorbell(client);
+	desc->db_trigger_uk = gfx_addr + client->doorbell_offset;
+	desc->process_desc = gfx_addr + client->proc_desc_offset;
+	desc->wq_addr = gfx_addr + client->wq_offset;
+	desc->wq_size = client->wq_size;
 
 	/*
 	 * XXX: Take LRCs from an existing context if this is not an
 	 * IsKMDCreatedContext client
 	 */
-	desc.desc_private = (uintptr_t)client;
-
-	/* Pool context is pinned already */
-	sg = guc->ctx_pool_vma->pages;
-	sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
-			     sizeof(desc) * client->ctx_index);
+	desc->desc_private = (uintptr_t)client;
 }
 
 static void guc_ctx_desc_fini(struct intel_guc *guc,
 			      struct i915_guc_client *client)
 {
-	struct guc_context_desc desc;
-	struct sg_table *sg;
+	struct guc_context_desc *desc;
 
-	memset(&desc, 0, sizeof(desc));
-
-	sg = guc->ctx_pool_vma->pages;
-	sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
-			     sizeof(desc) * client->ctx_index);
+	desc = __get_context_desc(client);
+	memset(desc, 0, sizeof(*desc));
 }
 
 /**
@@ -1024,6 +1011,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	const size_t gemsize = round_up(poolsize, PAGE_SIZE);
 	struct intel_guc *guc = &dev_priv->guc;
 	struct i915_vma *vma;
+	void *vaddr;
 
 	if (!HAS_GUC_SCHED(dev_priv))
 		return 0;
@@ -1035,14 +1023,21 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	if (!i915.enable_guc_submission)
 		return 0; /* not enabled  */
 
-	if (guc->ctx_pool_vma)
+	if (guc->ctx_pool)
 		return 0; /* already allocated */
 
 	vma = intel_guc_allocate_vma(guc, gemsize);
 	if (IS_ERR(vma))
 		return PTR_ERR(vma);
 
-	guc->ctx_pool_vma = vma;
+	guc->ctx_pool = vma;
+
+	vaddr = i915_gem_object_pin_map(vma->obj, I915_MAP_WB);
+	if (IS_ERR(vaddr))
+		goto err;
+
+	guc->ctx_pool_vaddr = vaddr;
+
 	ida_init(&guc->ctx_ids);
 	intel_guc_log_create(guc);
 	guc_addon_create(guc);
@@ -1217,9 +1212,12 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv)
 	i915_vma_unpin_and_release(&guc->ads_vma);
 	i915_vma_unpin_and_release(&guc->log.vma);
 
-	if (guc->ctx_pool_vma)
+	if (guc->ctx_pool_vaddr) {
 		ida_destroy(&guc->ctx_ids);
-	i915_vma_unpin_and_release(&guc->ctx_pool_vma);
+		i915_gem_object_unpin_map(guc->ctx_pool->obj);
+	}
+
+	i915_vma_unpin_and_release(&guc->ctx_pool);
 }
 
 /**
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
index 2f270d0..1a6e478 100644
@@ -156,7 +156,7 @@ static void guc_params_init(struct drm_i915_private *dev_priv)
 
 	/* If GuC submission is enabled, set up additional parameters here */
 	if (i915.enable_guc_submission) {
-		u32 pgs = guc_ggtt_offset(dev_priv->guc.ctx_pool_vma);
+		u32 pgs = guc_ggtt_offset(dev_priv->guc.ctx_pool);
 		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
 
 		pgs >>= PAGE_SHIFT;
drivers/gpu/drm/i915/intel_uc.h +2 -1
index c3a3843..77f7153 100644
@@ -153,7 +153,8 @@ struct intel_guc {
 	bool interrupts_enabled;
 
 	struct i915_vma *ads_vma;
-	struct i915_vma *ctx_pool_vma;
+	struct i915_vma *ctx_pool;
+	void *ctx_pool_vaddr;
 	struct ida ctx_ids;
 
 	struct i915_guc_client *execbuf_client;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v4 3/13 drm/i915/guc: Add onion teardown to the GuC setup

In reply to Oscar Mateo

Starting with intel_guc_loader, down to intel_guc_submission and finally to intel_guc_log.

v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)

v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"

v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)

---
 drivers/gpu/drm/i915/i915_drv.c            |  11 +-
 drivers/gpu/drm/i915/i915_gem.c            |  10 +-
 drivers/gpu/drm/i915/i915_guc_submission.c |  97 ++++----
 drivers/gpu/drm/i915/intel_guc_loader.c    |  21 --
 drivers/gpu/drm/i915/intel_guc_log.c       | 364 ++++++++++++++---------------
 drivers/gpu/drm/i915/intel_uc.c            |  55 +++--
 drivers/gpu/drm/i915/intel_uc.h            |   8 +-
 7 files changed, 297 insertions(+), 269 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +6 -5
index 03d9e45..6d9944a 100644
@@ -549,6 +549,8 @@ static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
 static void i915_gem_fini(struct drm_i915_private *dev_priv)
 {
 	mutex_lock(&dev_priv->drm.struct_mutex);
+	if (i915.enable_guc_loading)
+		intel_uc_fini_hw(dev_priv);
 	i915_gem_cleanup_engines(dev_priv);
 	i915_gem_context_fini(dev_priv);
 	mutex_unlock(&dev_priv->drm.struct_mutex);
@@ -609,7 +611,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	ret = i915_gem_init(dev_priv);
 	if (ret)
-		goto cleanup_irq;
+		goto cleanup_uc;
 
 	intel_modeset_gem_init(dev);
 
@@ -631,9 +633,9 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (i915_gem_suspend(dev_priv))
 		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
 	i915_gem_fini(dev_priv);
+cleanup_uc:
+	intel_uc_fini_fw(dev_priv);
 cleanup_irq:
-	intel_guc_fini(dev_priv);
-	intel_huc_fini(dev_priv);
 	drm_irq_uninstall(dev);
 	intel_teardown_gmbus(dev_priv);
 cleanup_csr:
@@ -1369,9 +1371,8 @@ void i915_driver_unload(struct drm_device *dev)
 	/* Flush any outstanding unpin_work. */
 	drain_workqueue(dev_priv->wq);
 
-	intel_guc_fini(dev_priv);
-	intel_huc_fini(dev_priv);
 	i915_gem_fini(dev_priv);
+	intel_uc_fini_fw(dev_priv);
 	intel_fbc_cleanup_cfb(dev_priv);
 
 	intel_power_domains_fini(dev_priv);
drivers/gpu/drm/i915/i915_gem.c +6 -4
index fd611b4..4eb46e4 100644
@@ -4596,10 +4596,12 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
 
 	intel_mocs_init_l3cc_table(dev_priv);
 
-	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_uc_init_hw(dev_priv);
-	if (ret)
-		goto out;
+	if (i915.enable_guc_loading) {
+		/* We can't enable contexts until all firmware is loaded */
+		ret = intel_uc_init_hw(dev_priv);
+		if (ret)
+			goto out;
+	}
 
 out:
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
drivers/gpu/drm/i915/i915_guc_submission.c +57 -40

162 lines not on this page · raw message

drivers/gpu/drm/i915/intel_guc_loader.c +0 -21
index 1a6e478..b8ba28d 100644
@@ -430,24 +430,3 @@ int intel_guc_select_fw(struct intel_guc *guc)
 
 	return 0;
 }
-
-/**
- * intel_guc_fini() - clean up all allocated resources
- * @dev_priv:	i915 device private
- */
-void intel_guc_fini(struct drm_i915_private *dev_priv)
-{
-	struct intel_uc_fw *guc_fw = &dev_priv->guc.fw;
-	struct drm_i915_gem_object *obj;
-
-	mutex_lock(&dev_priv->drm.struct_mutex);
-	i915_guc_submission_disable(dev_priv);
-	i915_guc_submission_fini(dev_priv);
-	mutex_unlock(&dev_priv->drm.struct_mutex);
-
-	obj = fetch_and_zero(&guc_fw->obj);
-	if (obj)
-		i915_gem_object_put(obj);
-
-	guc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
-}
drivers/gpu/drm/i915/intel_guc_log.c +182 -182

461 lines not on this page · raw message

drivers/gpu/drm/i915/intel_uc.c +41 -14

89 lines not on this page · raw message

drivers/gpu/drm/i915/intel_uc.h +5 -3
index 77f7153..eb30e7a 100644
@@ -187,7 +187,9 @@ struct intel_huc {
 void intel_uc_sanitize_options(struct drm_i915_private *dev_priv);
 void intel_uc_init_early(struct drm_i915_private *dev_priv);
 void intel_uc_init_fw(struct drm_i915_private *dev_priv);
+void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
+void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 void intel_uc_prepare_fw(struct drm_i915_private *dev_priv,
 			 struct intel_uc_fw *uc_fw);
 int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
@@ -196,7 +198,6 @@ void intel_uc_prepare_fw(struct drm_i915_private *dev_priv,
 /* intel_guc_loader.c */
 int intel_guc_select_fw(struct intel_guc *guc);
 int intel_guc_init_hw(struct intel_guc *guc);
-void intel_guc_fini(struct drm_i915_private *dev_priv);
 const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 int intel_guc_suspend(struct drm_i915_private *dev_priv);
 int intel_guc_resume(struct drm_i915_private *dev_priv);
@@ -212,10 +213,11 @@ void intel_uc_prepare_fw(struct drm_i915_private *dev_priv,
 struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size);
 
 /* intel_guc_log.c */
-void intel_guc_log_create(struct intel_guc *guc);
+int intel_guc_log_create(struct intel_guc *guc);
+void intel_guc_log_destroy(struct intel_guc *guc);
+int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
 void i915_guc_log_register(struct drm_i915_private *dev_priv);
 void i915_guc_log_unregister(struct drm_i915_private *dev_priv);
-int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
 
 static inline u32 guc_ggtt_offset(struct i915_vma *vma)
 {
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [PATCH v4 03/13] drm/i915/guc: Add onion teardown to the GuC setup

Quoted 60 lines · Oscar Mateo

Starting with intel_guc_loader, down to intel_guc_submission and finally to intel_guc_log.

v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)

v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"

v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)

---
 drivers/gpu/drm/i915/i915_drv.c            |  11 +-
 drivers/gpu/drm/i915/i915_gem.c            |  10 +-
 drivers/gpu/drm/i915/i915_guc_submission.c |  97 ++++----
 drivers/gpu/drm/i915/intel_guc_loader.c    |  21 --
 drivers/gpu/drm/i915/intel_guc_log.c       | 364 ++++++++++++++---------------
 drivers/gpu/drm/i915/intel_uc.c            |  55 +++--
 drivers/gpu/drm/i915/intel_uc.h            |   8 +-
 7 files changed, 297 insertions(+), 269 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +2 -0
index 03d9e45..6d9944a 100644
@@ -549,6 +549,8 @@ static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
 static void i915_gem_fini(struct drm_i915_private *dev_priv)
 {
 	mutex_lock(&dev_priv->drm.struct_mutex);
+	if (i915.enable_guc_loading)
+		intel_uc_fini_hw(dev_priv);
 
drivers/gpu/drm/i915/i915_gem.c +0 -2
index fd611b4..4eb46e4 100644
@@ -4596,10 +4596,12 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
 
 	intel_mocs_init_l3cc_table(dev_priv);
 
-	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_uc_init_hw(dev_priv);

drivers/gpu/drm/i915/i915_gem.c int i915_gem_init_hw(struct drm_i915_private *dev_priv) · line 4606

Quoted 10 lines
drivers/gpu/drm/i915/i915_gem.c +6 -2
-	if (ret)
-		goto out;
+	if (i915.enable_guc_loading) {
+		/* We can't enable contexts until all firmware is loaded */
+		ret = intel_uc_init_hw(dev_priv);
+		if (ret)
+			goto out;
+	}
 
 out:

I'm not happy with moving subfeature detection logic into the core GEM code. if (i915.enable_guc_loading) firstly should never be a module parameter (it's derived state!) and secondly it should reside next to the dependent logic and not be interrupting the central control flow. -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH v4 03/13] drm/i915/guc: Add onion teardown to the GuC setup

Quoted 69 lines · Chris Wilson
Quoted 68 lines · Oscar Mateo

Starting with intel_guc_loader, down to intel_guc_submission and finally to intel_guc_log.

v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)

v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"

v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)

---
  drivers/gpu/drm/i915/i915_drv.c            |  11 +-
  drivers/gpu/drm/i915/i915_gem.c            |  10 +-
  drivers/gpu/drm/i915/i915_guc_submission.c |  97 ++++----
  drivers/gpu/drm/i915/intel_guc_loader.c    |  21 --
  drivers/gpu/drm/i915/intel_guc_log.c       | 364 ++++++++++++++---------------
  drivers/gpu/drm/i915/intel_uc.c            |  55 +++--
  drivers/gpu/drm/i915/intel_uc.h            |   8 +-
  7 files changed, 297 insertions(+), 269 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +2 -0
index 03d9e45..6d9944a 100644
@@ -549,6 +549,8 @@ static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
  static void i915_gem_fini(struct drm_i915_private *dev_priv)
  {
  	mutex_lock(&dev_priv->drm.struct_mutex);
+	if (i915.enable_guc_loading)
+		intel_uc_fini_hw(dev_priv);
drivers/gpu/drm/i915/i915_gem.c +6 -4
index fd611b4..4eb46e4 100644
@@ -4596,10 +4596,12 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
 
  	intel_mocs_init_l3cc_table(dev_priv);
 
-	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_uc_init_hw(dev_priv);
-	if (ret)
-		goto out;
+	if (i915.enable_guc_loading) {
+		/* We can't enable contexts until all firmware is loaded */
+		ret = intel_uc_init_hw(dev_priv);
+		if (ret)
+			goto out;
+	}
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_gem.c int i915_gem_init_hw(struct drm_i915_private *dev_priv) · line 4606

Quoted 1 line
drivers/gpu/drm/i915/i915_gem.c +0 -0
  out:

I'm not happy with moving subfeature detection logic into the core GEM code. if (i915.enable_guc_loading) firstly should never be a module parameter (it's derived state!) and secondly it should reside next to the dependent logic and not be interrupting the central control flow. -Chris

What do you mean it's derived state? from what?
As for interrupting the central control flow, you are probably right, I can change it back (the code was refactored so many times that I cannot remember my logic behind that change anymore)
- Oscar
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

Re: [PATCH v4 03/13] drm/i915/guc: Add onion teardown to the GuC setup

Quoted 6 lines · Oscar Mateo
Quoted 4 lines · Chris Wilson

I'm not happy with moving subfeature detection logic into the core GEM code. if (i915.enable_guc_loading) firstly should never be a module parameter (it's derived state!) and secondly it should reside next to the dependent logic and not be interrupting the central control flow.

What do you mean it's derived state? from what?

The set of features, whether to use guc submission, huc, or whether there is a platform requirement to load the firmware, define whether or not we need to request and upload a particular firmware. Every module option should be a quirk to alter driver behaviour (i.e. a debugging crutch), few and strongly justified (we have too many) and necessarily global in scope. Device specific options should ideally use a more specific interface (most clear examples are the panel specific quirks). -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#7 lore raw

Re: [PATCH v4 03/13] drm/i915/guc: Add onion teardown to the GuC setup

Quoted 10 lines · Chris Wilson
Quoted 8 lines · Oscar Mateo
Quoted 5 lines · Chris Wilson

I'm not happy with moving subfeature detection logic into the core GEM code. if (i915.enable_guc_loading) firstly should never be a module parameter (it's derived state!) and secondly it should reside next to the dependent logic and not be interrupting the central control flow.

What do you mean it's derived state? from what?

Quoted 7 lines

The set of features, whether to use guc submission, huc, or whether there is a platform requirement to load the firmware, define whether or not we need to request and upload a particular firmware. Every module option should be a quirk to alter driver behaviour (i.e. a debugging crutch), few and strongly justified (we have too many) and necessarily global in scope. Device specific options should ideally use a more specific interface (most clear examples are the panel specific quirks).

Misguidance here was probably me enforcing the view that by hoisting and unifying the checks, it'll be easier to comprehend the code when a check covers greater amount of lines. I have to agree that the top- level driver control flow should not be having the checks, but each code path existing only within a .c file should have the "skip this branch" check earlier than later.

Sorry for misguidance :P

Regards, Joonas
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Re: [PATCH v4 03/13] drm/i915/guc: Add onion teardown to the GuC setup

In reply to Chris Wilson
Quoted 7 lines · Chris Wilson
Quoted 6 lines · Oscar Mateo
Quoted 4 lines · Chris Wilson

I'm not happy with moving subfeature detection logic into the core GEM code. if (i915.enable_guc_loading) firstly should never be a module parameter (it's derived state!) and secondly it should reside next to the dependent logic and not be interrupting the central control flow.

What do you mean it's derived state? from what?

Quoted 9 lines

The set of features, whether to use guc submission, huc, or whether there is a platform requirement to load the firmware, define whether or not we need to request and upload a particular firmware. Every module option should be a quirk to alter driver behaviour (i.e. a debugging crutch), few and strongly justified (we have too many) and necessarily global in scope. Device specific options should ideally use a more specific interface (most clear examples are the panel specific quirks). -Chris

Ok, I see what you mean now. I didn't follow the GuC development, so I don't know how we got here (separate enable_guc_loading and enable_guc_submission module parameters, a lot of different HAS_GUC_UCODE/HAS_GUC_SCHED/HAS_HUC_UCODE that test the same thing, etc...).

I'll create a patch with a cleanup proposal and send it as an RFC.

-- Oscar
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

PATCH 4/13 drm/i915/guc: The Additional Data Struct (ADS) should get enabled together with GuC submission

In reply to Oscar Mateo

It's mandatory and it gets created if and only if GuC submission is enabled, so that should be the condition for informing the GuC about it.

Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while at it, add an explanation of what things go inside the ADS object.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 17 ++++++++++++-----
 drivers/gpu/drm/i915/intel_guc_loader.c    | 10 ++++------
 2 files changed, 16 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +12 -5
index 08287f7..b3d1d5c 100644
@@ -62,6 +62,13 @@
  * ELSP context descriptor dword into Work Item.
  * See guc_wq_item_append()
  *
+ * ADS:
+ * The Additional Data Struct (ADS) has pointers for different buffers used by
+ * the GuC. One single gem object contains the ADS struct itself (guc_ads), the
+ * scheduling policies (guc_policies), a structure describing a collection of
+ * register sets (guc_mmio_reg_state) and some extra pages for the GuC to save
+ * its internal state for sleep.
+ *
  */
 
 static inline bool is_high_priority(struct i915_guc_client* client)
@@ -937,7 +944,7 @@ static void guc_policies_init(struct guc_policies *policies)
 	policies->is_valid = 1;
 }
 
-static int guc_addon_create(struct intel_guc *guc)
+static int guc_ads_create(struct intel_guc *guc)
 {
 	struct drm_i915_private *dev_priv = guc_to_i915(guc);
 	struct i915_vma *vma;
@@ -1000,7 +1007,7 @@ static int guc_addon_create(struct intel_guc *guc)
 	return 0;
 }
 
-static void guc_addon_destroy(struct intel_guc *guc)
+static void guc_ads_destroy(struct intel_guc *guc)
 {
 	i915_vma_unpin_and_release(&guc->ads_vma);
 }
@@ -1050,7 +1057,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	if (ret < 0)
 		goto err_vaddr;
 
-	ret = guc_addon_create(guc);
+	ret = guc_ads_create(guc);
 	if (ret < 0)
 		goto err_log;
 
@@ -1069,7 +1076,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	return 0;
 
 err_ads:
-	guc_addon_destroy(guc);
+	guc_ads_destroy(guc);
 err_log:
 	intel_guc_log_destroy(guc);
 err_vaddr:
@@ -1089,7 +1096,7 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv)
 	guc_client_free(guc->execbuf_client);
 	guc->execbuf_client = NULL;
 	ida_destroy(&guc->ctx_ids);
-	guc_addon_destroy(guc);
+	guc_ads_destroy(guc);
 	intel_guc_log_destroy(guc);
 	i915_gem_object_unpin_map(guc->ctx_pool->obj);
 	i915_vma_unpin_and_release(&guc->ctx_pool);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -6
index b8ba28d..62ebf56 100644
@@ -148,17 +148,15 @@ static void guc_params_init(struct drm_i915_private *dev_priv)
 	} else
 		params[GUC_CTL_DEBUG] = GUC_LOG_DISABLED;
 
-	if (guc->ads_vma) {
-		u32 ads = guc_ggtt_offset(guc->ads_vma) >> PAGE_SHIFT;
-		params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
-		params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
-	}
-
 	/* If GuC submission is enabled, set up additional parameters here */
 	if (i915.enable_guc_submission) {
+		u32 ads = guc_ggtt_offset(guc->ads_vma) >> PAGE_SHIFT;
 		u32 pgs = guc_ggtt_offset(dev_priv->guc.ctx_pool);
 		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
 
+		params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
+		params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
+
 		pgs >>= PAGE_SHIFT;
 		params[GUC_CTL_CTXINFO] = (pgs << GUC_CTL_BASE_ADDR_SHIFT) |
 			(ctx_in_16 << GUC_CTL_CTXNUM_IN16_SHIFT);
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

PATCH v3 5/13 drm/i915/guc: Break out the GuC log extras into their own "runtime" struct

In reply to Oscar Mateo

When initializing the GuC log struct, there is an object we need to allocate always, since the GuC needs its address at fw load time. The rest is only needed during runtime, in the sense that we only create if we actually enable GuC logging. Make that distinction explicit by subdividing further the intel_guc_log struct.

v2: Call the new struct "runtime", instead of "extras" (Joonas)

v3: Check indent (Joonas)

---
 drivers/gpu/drm/i915/i915_irq.c      |  4 +-
 drivers/gpu/drm/i915/intel_guc_log.c | 72 ++++++++++++++++++------------------
 drivers/gpu/drm/i915/intel_uc.h      | 12 +++---
 3 files changed, 45 insertions(+), 43 deletions(-)
drivers/gpu/drm/i915/i915_irq.c +2 -2
index cb20c94..3d2e623 100644
@@ -1741,8 +1741,8 @@ static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv, u32 gt_iir)
 			I915_WRITE(SOFT_SCRATCH(15), msg & ~flush);
 
 			/* Handle flush interrupt in bottom half */
-			queue_work(dev_priv->guc.log.flush_wq,
-				   &dev_priv->guc.log.flush_work);
+			queue_work(dev_priv->guc.log.runtime.flush_wq,
+				   &dev_priv->guc.log.runtime.flush_work);
 
 			dev_priv->guc.log.flush_interrupt_count++;
 		} else {
drivers/gpu/drm/i915/intel_guc_log.c +36 -36

202 lines not on this page · raw message

drivers/gpu/drm/i915/intel_uc.h +7 -5
index eb30e7a..c6f880c 100644
@@ -132,11 +132,13 @@ struct intel_uc_fw {
 struct intel_guc_log {
 	uint32_t flags;
 	struct i915_vma *vma;
-	void *buf_addr;
-	struct workqueue_struct *flush_wq;
-	struct work_struct flush_work;
-	struct rchan *relay_chan;
-
+	/* The runtime stuff gets created only when GuC logging gets enabled */
+	struct {
+		void *buf_addr;
+		struct workqueue_struct *flush_wq;
+		struct work_struct flush_work;
+		struct rchan *relay_chan;
+	} runtime;
 	/* logging related stats */
 	u32 capture_miss_count;
 	u32 flush_interrupt_count;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

PATCH v2 7/13 drm/i915/guc: Improve the GuC documentation & comments about proxy submissions

In reply to Oscar Mateo

While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one firware interface field (s/ring_tail/submit_element_info, since it can contain more than just the ring tail).

No change in functionality.

v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 42 +++++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  4 +--
 drivers/gpu/drm/i915/intel_uc.h            |  6 +++--
 3 files changed, 33 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +27 -15
index b3d1d5c..c02167c 100644
@@ -30,16 +30,25 @@
 /**
  * DOC: GuC-based command submission
  *
- * i915_guc_client:
- * We use the term client to avoid confusion with contexts. A i915_guc_client is
- * equivalent to GuC object guc_context_desc. This context descriptor is
- * allocated from a pool of 1024 entries. Kernel driver will allocate doorbell
- * and workqueue for it. Also the process descriptor (guc_process_desc), which
- * is mapped to client space. So the client can write Work Item then ring the
- * doorbell.
+ * GuC client:
+ * A i915_guc_client refers to a submission path through GuC. Currently, there
+ * is only one of these (the execbuf_client) and this one is charged with all
+ * submissions to the GuC. This struct is the owner of a doorbell, a process
+ * descriptor and a workqueue (all of them inside a single gem object that
+ * contains all required pages for these elements).
  *
- * To simplify the implementation, we allocate one gem object that contains all
- * pages for doorbell, process descriptor and workqueue.
+ * GuC context descriptor:
+ * During initialization, the driver allocates a static pool of 1024 such
+ * descriptors, and shares them with the GuC.
+ * Currently, there exists a 1:1 mapping between a i915_guc_client and a
+ * guc_context_desc (via the client's context_index), so effectively only
+ * one guc_context_desc gets used. This context descriptor lets the GuC know
+ * about the doorbell, workqueue and process descriptor. Theoretically, it also
+ * lets the GuC know about our HW contexts (Context ID, etc...), but we actually
+ * employ a kind of submission where the GuC uses the LRCA sent via the work
+ * item instead (the single guc_context_desc associated to execbuf client
+ * contains information about the default kernel context only, but this is
+ * essentially unused). This is called a "proxy" submission.
  *
  * The Scratch registers:
  * There are 16 MMIO-based registers start from 0xC180. The kernel driver writes
@@ -308,10 +317,17 @@ static void guc_ctx_desc_init(struct intel_guc *guc,
 		if (!ce->state)
 			break;	/* XXX: continue? */
 
+		/*
+		 * XXX: When this is a GUC_CTX_DESC_ATTR_KERNEL client (proxy
+		 * submission or, in other words, not using a direct submission
+		 * model) the KMD's LRCA is not used for any work submission.
+		 * Instead, the GuC uses the LRCA of the user mode context (see
+		 * guc_wq_item_append below).
+		 */
 		lrc->context_desc = lower_32_bits(ce->lrc_desc);
 
 		/* The state page is after PPHWSP */
-		lrc->ring_lcra =
+		lrc->ring_lrca =
 			guc_ggtt_offset(ce->state) + LRC_STATE_PN * PAGE_SIZE;
 		lrc->context_id = (client->ctx_index << GUC_ELC_CTXID_OFFSET) |
 				(guc_engine_id << GUC_ELC_ENGINE_OFFSET);
@@ -341,10 +357,6 @@ static void guc_ctx_desc_init(struct intel_guc *guc,
 	desc->wq_addr = gfx_addr + client->wq_offset;
 	desc->wq_size = client->wq_size;
 
-	/*
-	 * XXX: Take LRCs from an existing context if this is not an
-	 * IsKMDCreatedContext client
-	 */
 	desc->desc_private = (uintptr_t)client;
 }
 
@@ -468,7 +480,7 @@ static void guc_wq_item_append(struct i915_guc_client *client,
 	/* The GuC wants only the low-order word of the context descriptor */
 	wqi->context_desc = (u32)intel_lr_context_descriptor(rq->ctx, engine);
 
-	wqi->ring_tail = tail << WQ_RING_TAIL_SHIFT;
+	wqi->submit_element_info = tail << WQ_RING_TAIL_SHIFT;
 	wqi->fence_id = rq->global_seqno;
 }
 
drivers/gpu/drm/i915/intel_guc_fwif.h +2 -2
index 3ae8cef..4edf40f 100644
@@ -251,7 +251,7 @@ struct guc_doorbell_info {
 struct guc_wq_item {
 	u32 header;
 	u32 context_desc;
-	u32 ring_tail;
+	u32 submit_element_info;
 	u32 fence_id;
 } __packed;
 
@@ -278,7 +278,7 @@ struct guc_execlist_context {
 	u32 context_desc;
 	u32 context_id;
 	u32 ring_status;
-	u32 ring_lcra;
+	u32 ring_lrca;
 	u32 ring_begin;
 	u32 ring_end;
 	u32 ring_next_free_location;
drivers/gpu/drm/i915/intel_uc.h +4 -2
index 3ec54a1..65d0b59 100644
@@ -34,7 +34,9 @@
 
 /*
  * This structure primarily describes the GEM object shared with the GuC.
- * The GEM object is held for the entire lifetime of our interaction with
+ * The specs sometimes refer to this object as a "GuC context", but we use
+ * the term "client" to avoid confusion with hardware contexts. This
+ * GEM object is held for the entire lifetime of our interaction with
  * the GuC, being allocated before the GuC is loaded with its firmware.
  * Because there's no way to update the address used by the GuC after
  * initialisation, the shared object must stay pinned into the GGTT as
@@ -44,7 +46,7 @@
  *
  * The single GEM object described here is actually made up of several
  * separate areas, as far as the GuC is concerned. The first page (kept
- * kmap'd) includes the "process decriptor" which holds sequence data for
+ * kmap'd) includes the "process descriptor" which holds sequence data for
  * the doorbell, and one cacheline which actually *is* the doorbell; a
  * write to this will "ring the doorbell" (i.e. send an interrupt to the
  * GuC). The subsequent  pages of the client object constitute the work
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#12 lore raw

PATCH v3 6/13 drm/i915/guc: Make intel_guc_send a function pointer

In reply to Oscar Mateo

Prepare for an alternate GuC communication interface.

v2: Make a few functions static and name them correctly while we are at it (Oscar), but leave an intel_guc_send_mmio interface for users that require old-style communication.

v3: Send intel_uc_init_early back to the top (Michal).

---
 drivers/gpu/drm/i915/intel_uc.c | 16 +++++++++++-----
 drivers/gpu/drm/i915/intel_uc.h |  9 ++++++++-
 2 files changed, 19 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_uc.c +11 -5
index 516e57d..ea99c89 100644
@@ -83,7 +83,10 @@ void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
 
 void intel_uc_init_early(struct drm_i915_private *dev_priv)
 {
-	mutex_init(&dev_priv->guc.send_mutex);
+	struct intel_guc *guc = &dev_priv->guc;
+
+	mutex_init(&guc->send_mutex);
+	guc->send = intel_guc_send_mmio;
 }
 
 void intel_uc_init_fw(struct drm_i915_private *dev_priv)
@@ -216,7 +219,7 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
  * Read GuC command/status register (SOFT_SCRATCH_0)
  * Return true if it contains a response rather than a command
  */
-static bool intel_guc_recv(struct intel_guc *guc, u32 *status)
+static bool guc_recv(struct intel_guc *guc, u32 *status)
 {
 	struct drm_i915_private *dev_priv = guc_to_i915(guc);
 
@@ -225,7 +228,10 @@ static bool intel_guc_recv(struct intel_guc *guc, u32 *status)
 	return INTEL_GUC_RECV_IS_RESPONSE(val);
 }
 
-int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len)
+/*
+ * This function implements the MMIO based host to GuC interface.
+ */
+int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len)
 {
 	struct drm_i915_private *dev_priv = guc_to_i915(guc);
 	u32 status;
@@ -253,9 +259,9 @@ int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len)
 	 * up to that length of time, then switch to a slower sleep-wait loop.
 	 * No inte_guc_send command should ever take longer than 10ms.
 	 */
-	ret = wait_for_us(intel_guc_recv(guc, &status), 10);
+	ret = wait_for_us(guc_recv(guc, &status), 10);
 	if (ret)
-		ret = wait_for(intel_guc_recv(guc, &status), 10);
+		ret = wait_for(guc_recv(guc, &status), 10);
 	if (status != INTEL_GUC_STATUS_SUCCESS) {
 		/*
 		 * Either the GuC explicitly returned an error (which
drivers/gpu/drm/i915/intel_uc.h +8 -1
index c6f880c..3ec54a1 100644
@@ -176,6 +176,9 @@ struct intel_guc {
 
 	/* To serialize the intel_guc_send actions */
 	struct mutex send_mutex;
+
+	/* GuC's FW specific send function */
+	int (*send)(struct intel_guc *guc, const u32 *data, u32 len);
 };
 
 struct intel_huc {
@@ -194,8 +197,12 @@ struct intel_huc {
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 void intel_uc_prepare_fw(struct drm_i915_private *dev_priv,
 			 struct intel_uc_fw *uc_fw);
-int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
 int intel_guc_sample_forcewake(struct intel_guc *guc);
+int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len);
+static inline int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	return guc->send(guc, action, len);
+}
 
 /* intel_guc_loader.c */
 int intel_guc_select_fw(struct intel_guc *guc);
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#13 lore raw

PATCH 11/13 drm/i915/guc: Split out the mmio_white_list struct

In reply to Oscar Mateo

We are going to need it for future platforms.

---
 drivers/gpu/drm/i915/i915_guc_submission.c |  4 ++--
 drivers/gpu/drm/i915/intel_guc_fwif.h      | 15 ++++++++-------
 2 files changed, 10 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +2 -2
index 735dcba..3d78a6b 100644
@@ -1050,11 +1050,11 @@ static int guc_ads_create(struct intel_guc *guc)
 
 	/* MMIO reg state */
 	for_each_engine(engine, dev_priv, id) {
-		blob->reg_state.mmio_white_list[engine->guc_id].mmio_start =
+		blob->reg_state.white_list[engine->guc_id].mmio_start =
 			engine->mmio_base + GUC_MMIO_WHITE_LIST_START;
 
 		/* Nothing to be saved or restored for now. */
-		blob->reg_state.mmio_white_list[engine->guc_id].count = 0;
+		blob->reg_state.white_list[engine->guc_id].count = 0;
 	}
 
 	/*
drivers/gpu/drm/i915/intel_guc_fwif.h +8 -7
index 18131b7..cb36cbf 100644
@@ -409,16 +409,17 @@ struct guc_mmio_regset {
 	u32 number_of_registers;
 } __packed;
 
+/* MMIO registers that are set as non privileged */
+struct mmio_white_list {
+	u32 mmio_start;
+	u32 offsets[GUC_MMIO_WHITE_LIST_MAX];
+	u32 count;
+} __packed;
+
 struct guc_mmio_reg_state {
 	struct guc_mmio_regset global_reg;
 	struct guc_mmio_regset engine_reg[GUC_MAX_ENGINES_NUM];
-
-	/* MMIO registers that are set as non privileged */
-	struct __packed {
-		u32 mmio_start;
-		u32 offsets[GUC_MMIO_WHITE_LIST_MAX];
-		u32 count;
-	} mmio_white_list[GUC_MAX_ENGINES_NUM];
+	struct mmio_white_list white_list[GUC_MAX_ENGINES_NUM];
 } __packed;
 
 /* GuC Additional Data Struct */
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

PATCH 12/13 drm/i915/guc: Move guc_interrupts_release next to guc_interrupts_capture

In reply to Oscar Mateo

They go better together.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 48 +++++++++++++++---------------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +24 -24
index 3d78a6b..3398204 100644
@@ -1190,6 +1190,30 @@ static void guc_interrupts_capture(struct drm_i915_private *dev_priv)
 	dev_priv->rps.pm_intrmsk_mbz &= ~GEN8_PMINTR_DISABLE_REDIRECT_TO_GUC;
 }
 
+static void guc_interrupts_release(struct drm_i915_private *dev_priv)
+{
+	struct intel_engine_cs *engine;
+	enum intel_engine_id id;
+	int irqs;
+
+	/*
+	 * tell all command streamers NOT to forward interrupts or vblank
+	 * to GuC.
+	 */
+	irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_NEVER);
+	irqs |= _MASKED_BIT_DISABLE(GFX_INTERRUPT_STEERING);
+	for_each_engine(engine, dev_priv, id)
+		I915_WRITE(RING_MODE_GEN7(engine), irqs);
+
+	/* route all GT interrupts to the host */
+	I915_WRITE(GUC_BCS_RCS_IER, 0);
+	I915_WRITE(GUC_VCS2_VCS1_IER, 0);
+	I915_WRITE(GUC_WD_VECS_IER, 0);
+
+	dev_priv->rps.pm_intrmsk_mbz |= GEN8_PMINTR_DISABLE_REDIRECT_TO_GUC;
+	dev_priv->rps.pm_intrmsk_mbz &= ~ARAT_EXPIRED_INTRMSK;
+}
+
 int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 {
 	struct intel_guc *guc = &dev_priv->guc;
@@ -1253,30 +1277,6 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 	return err;
 }
 
-static void guc_interrupts_release(struct drm_i915_private *dev_priv)
-{
-	struct intel_engine_cs *engine;
-	enum intel_engine_id id;
-	int irqs;
-
-	/*
-	 * tell all command streamers NOT to forward interrupts or vblank
-	 * to GuC.
-	 */
-	irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_NEVER);
-	irqs |= _MASKED_BIT_DISABLE(GFX_INTERRUPT_STEERING);
-	for_each_engine(engine, dev_priv, id)
-		I915_WRITE(RING_MODE_GEN7(engine), irqs);
-
-	/* route all GT interrupts to the host */
-	I915_WRITE(GUC_BCS_RCS_IER, 0);
-	I915_WRITE(GUC_VCS2_VCS1_IER, 0);
-	I915_WRITE(GUC_WD_VECS_IER, 0);
-
-	dev_priv->rps.pm_intrmsk_mbz |= GEN8_PMINTR_DISABLE_REDIRECT_TO_GUC;
-	dev_priv->rps.pm_intrmsk_mbz &= ~ARAT_EXPIRED_INTRMSK;
-}
-
 void i915_guc_submission_disable(struct drm_i915_private *dev_priv)
 {
 	struct intel_guc *guc = &dev_priv->guc;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#15 lore raw

PATCH 13/13 HAX Enable GuC loading & submission

In reply to Oscar Mateo

This is just for CI testing, do not merge.

---
 drivers/gpu/drm/i915/i915_params.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_params.c +4 -4
index b6a7e36..abd2894 100644
@@ -56,8 +56,8 @@ struct i915_params i915 __read_mostly = {
 	.verbose_state_checks = 1,
 	.nuclear_pageflip = 0,
 	.edp_vswing = 0,
-	.enable_guc_loading = 0,
-	.enable_guc_submission = 0,
+	.enable_guc_loading = 1,
+	.enable_guc_submission = 1,
 	.guc_log_level = -1,
 	.guc_firmware_path = NULL,
 	.huc_firmware_path = NULL,
@@ -221,12 +221,12 @@ struct i915_params i915 __read_mostly = {
 module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading, int, 0400);
 MODULE_PARM_DESC(enable_guc_loading,
 		"Enable GuC firmware loading "
-		"(-1=auto, 0=never [default], 1=if available, 2=required)");
+		"(-1=auto, 0=never, 1=if available [default], 2=required)");
 
 module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, int, 0400);
 MODULE_PARM_DESC(enable_guc_submission,
 		"Enable GuC submission "
-		"(-1=auto, 0=never [default], 1=if available, 2=required)");
+		"(-1=auto, 0=never, 1=if available [default], 2=required)");
 
 module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
 MODULE_PARM_DESC(guc_log_level,
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#16 lore raw

PATCH v3 10/13 drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage descriptor"

In reply to Oscar Mateo

A GuC context and a HW context are in no way related, so the name "GuC context descriptor" is very unfortunate, because a new reader of the code gets overwhelmed very quickly with a lot of things called "context" that refer to different things. We can improve legibility a lot by simply renaming a few objects in the GuC code.

v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)

v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)

Cc Chris Wilson <[email protected]>
Cc Daniele Ceraolo Spurio <[email protected]>
---
 drivers/gpu/drm/i915/i915_debugfs.c        |   4 +-
 drivers/gpu/drm/i915/i915_guc_submission.c | 118 +++++++++++++++--------------
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  48 +++++++-----
 drivers/gpu/drm/i915/intel_guc_loader.c    |   4 +-
 drivers/gpu/drm/i915/intel_uc.h            |   8 +-
 5 files changed, 96 insertions(+), 86 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
index 061f8a5..29eefe2 100644
@@ -2474,8 +2474,8 @@ static void i915_guc_client_info(struct seq_file *m,
 	enum intel_engine_id id;
 	uint64_t tot = 0;
 
-	seq_printf(m, "\tPriority %d, GuC ctx index: %u, PD offset 0x%x\n",
-		client->priority, client->ctx_index, client->proc_desc_offset);
+	seq_printf(m, "\tPriority %d, GuC stage index: %u, PD offset 0x%x\n",
+		client->priority, client->stage_id, client->proc_desc_offset);
 	seq_printf(m, "\tDoorbell id %d, offset: 0x%lx, cookie 0x%x\n",
 		client->doorbell_id, client->doorbell_offset, client->doorbell_cookie);
 	seq_printf(m, "\tWQ size %d, offset: 0x%x, tail %d\n",
drivers/gpu/drm/i915/i915_guc_submission.c +60 -58

326 lines not on this page · raw message

drivers/gpu/drm/i915/intel_guc_fwif.h +28 -20

80 lines not on this page · raw message

drivers/gpu/drm/i915/intel_guc_loader.c +2 -2
index 62ebf56..7d92321 100644
@@ -151,8 +151,8 @@ static void guc_params_init(struct drm_i915_private *dev_priv)
 	/* If GuC submission is enabled, set up additional parameters here */
 	if (i915.enable_guc_submission) {
 		u32 ads = guc_ggtt_offset(guc->ads_vma) >> PAGE_SHIFT;
-		u32 pgs = guc_ggtt_offset(dev_priv->guc.ctx_pool);
-		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
+		u32 pgs = guc_ggtt_offset(dev_priv->guc.stage_desc_pool);
+		u32 ctx_in_16 = GUC_MAX_STAGE_DESCRIPTORS / 16;
 
 		params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
 		params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
drivers/gpu/drm/i915/intel_uc.h +4 -4
index 65d0b59..6cf2d14 100644
@@ -74,7 +74,7 @@ struct i915_guc_client {
 
 	uint32_t engines;		/* bitmap of (host) engine ids	*/
 	uint32_t priority;
-	u32 ctx_index;
+	u32 stage_id;
 	uint32_t proc_desc_offset;
 
 	u16 doorbell_id;
@@ -157,9 +157,9 @@ struct intel_guc {
 	bool interrupts_enabled;
 
 	struct i915_vma *ads_vma;
-	struct i915_vma *ctx_pool;
-	void *ctx_pool_vaddr;
-	struct ida ctx_ids;
+	struct i915_vma *stage_desc_pool;
+	void *stage_desc_pool_vaddr;
+	struct ida stage_ids;
 
 	struct i915_guc_client *execbuf_client;
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

PATCH v2 8/13 drm/i915/guc: Wait for doorbell to be inactive before deallocating

In reply to Oscar Mateo

Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go to zero after updating db_status before we call the GuC to release the doorbell.

Kudos to Daniele for finding this out.

v2: WARN instead of DRM_ERROR (Joonas)

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +10 -0
index c02167c..2d4d854 100644
@@ -206,12 +206,22 @@ static int __create_doorbell(struct i915_guc_client *client)
 
 static int __destroy_doorbell(struct i915_guc_client *client)
 {
+	struct drm_i915_private *dev_priv = guc_to_i915(client->guc);
 	struct guc_doorbell_info *doorbell;
+	u16 db_id = client->doorbell_id;
+
+	GEM_BUG_ON(db_id >= GUC_DOORBELL_INVALID);
 
 	doorbell = __get_doorbell(client);
 	doorbell->db_status = GUC_DOORBELL_DISABLED;
 	doorbell->cookie = 0;
 
+	/* Doorbell release flow requires that we wait for GEN8_DRB_VALID bit
+	 * to go to zero after updating db_status before we call the GuC to
+	 * release the doorbell */
+	if (wait_for_us(!(I915_READ(GEN8_DRBREGL(db_id)) & GEN8_DRB_VALID), 10))
+		WARN_ONCE(true, "Doorbell never became invalid after disable\n");
+
 	return __guc_deallocate_doorbell(client->guc, client->ctx_index);
 }
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#18 lore raw

PATCH v2 9/13 drm/i915/guc: A little bit more of doorbell sanitization

In reply to Oscar Mateo

Some recent refactoring patches have left the doorbell creation outside the GuC client allocation, which does not make a lot of sense (a client without a doorbell is something useless). Move it back there, and refactor the init_doorbell_hw consequently.

Thanks to this, we can do some other improvements, like hoisting the check for GuC submission enabled out of the enable function.

v2: Rebased.

Cc Michal Wajdeczko <[email protected]>
Cc Arkadiusz Hiler <[email protected]>
Cc Tvrtko Ursulin <[email protected]>
Cc Chris Wilson <[email protected]>
Cc Daniele Ceraolo Spurio <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 231 ++++++++++++++++-------------
 drivers/gpu/drm/i915/intel_uc.c            |  21 +--
 2 files changed, 138 insertions(+), 114 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +126 -105
index 2d4d854..c9d324f 100644
@@ -163,15 +163,13 @@ static struct guc_context_desc *__get_context_desc(struct i915_guc_client *clien
  * client object which contains the page being used for the doorbell
  */
 
-static int __update_doorbell_desc(struct i915_guc_client *client, u16 new_id)
+static void __update_doorbell_desc(struct i915_guc_client *client, u16 new_id)
 {
 	struct guc_context_desc *desc;
 
 	/* Update the GuC's idea of the doorbell ID */
 	desc = __get_context_desc(client);
 	desc->db_id = new_id;
-
-	return 0;
 }
 
 static struct guc_doorbell_info *__get_doorbell(struct i915_guc_client *client)
@@ -225,6 +223,28 @@ static int __destroy_doorbell(struct i915_guc_client *client)
 	return __guc_deallocate_doorbell(client->guc, client->ctx_index);
 }
 
+static int create_doorbell(struct i915_guc_client *client)
+{
+	int ret;
+
+	ret = __reserve_doorbell(client);
+	if (ret)
+		return ret;
+
+	__update_doorbell_desc(client, client->doorbell_id);
+
+	ret = __create_doorbell(client);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	__update_doorbell_desc(client, GUC_DOORBELL_INVALID);
+	__unreserve_doorbell(client);
+	return ret;
+}
+
 static int destroy_doorbell(struct i915_guc_client *client)
 {
 	int err;
@@ -494,6 +514,17 @@ static void guc_wq_item_append(struct i915_guc_client *client,
 	wqi->fence_id = rq->global_seqno;
 }
 
+static void guc_reset_wq(struct i915_guc_client *client)
+{
+	struct guc_process_desc *desc = client->vaddr +
+					client->proc_desc_offset;
+
+	desc->head = 0;
+	desc->tail = 0;
+
+	client->wq_tail = 0;
+}
+
 static int guc_ring_doorbell(struct i915_guc_client *client)
 {
 	struct guc_process_desc *desc;
@@ -749,19 +780,6 @@ struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size)
 	return vma;
 }
 
-static void guc_client_free(struct i915_guc_client *client)
-{
-	/*
-	 * XXX: wait for any outstanding submissions before freeing memory.
-	 * Be sure to drop any locks
-	 */
-	guc_ctx_desc_fini(client->guc, client);
-	i915_gem_object_unpin_map(client->vma->obj);
-	i915_vma_unpin_and_release(&client->vma);
-	ida_simple_remove(&client->guc->ctx_ids, client->ctx_index);
-	kfree(client);
-}
-
 /* Check that a doorbell register is in the expected state */
 static bool doorbell_ok(struct intel_guc *guc, u16 db_id)
 {
@@ -792,9 +810,8 @@ static int __reset_doorbell(struct i915_guc_client* client, u16 db_id)
 {
 	int err;
 
-	err = __update_doorbell_desc(client, db_id);
-	if (!err)
-		err = __create_doorbell(client);
+	__update_doorbell_desc(client, db_id);
+	err = __create_doorbell(client);
 	if (!err)
 		err = __destroy_doorbell(client);
 
@@ -802,48 +819,61 @@ static int __reset_doorbell(struct i915_guc_client* client, u16 db_id)
 }
 
 /*
- * Borrow the first client to set up & tear down each unused doorbell
- * in turn, to ensure that all doorbell h/w is (re)initialised.
+ * Set up & tear down each unused doorbell in turn, to ensure that all doorbell
+ * HW is (re)initialised. For that end, we might have to borrow the first
+ * client. Also, tell GuC about all the doorbells in use by all clients.
+ * We do this because the KMD, the GuC and the doorbell HW can easily go out of
+ * sync (e.g. we can reset the GuC, but not the doorbel HW).
  */
 static int guc_init_doorbell_hw(struct intel_guc *guc)
 {
 	struct i915_guc_client *client = guc->execbuf_client;
-	int err;
-	int i;
-
-	if (has_doorbell(client))
-		destroy_doorbell(client);
+	bool recreate_first_client = false;
+	u16 db_id;
+	int ret;
 
-	for (i = 0; i < GUC_NUM_DOORBELLS; ++i) {
-		if (doorbell_ok(guc, i))
+	/* For unused doorbells, make sure they are disabled */
+	for_each_clear_bit(db_id, guc->doorbell_bitmap, GUC_NUM_DOORBELLS) {
+		if (doorbell_ok(guc, db_id))
 			continue;
 
-		err = __reset_doorbell(client, i);
-		WARN(err, "Doorbell %d reset failed, err %d\n", i, err);
+		if (has_doorbell(client)) {
+			/* Borrow execbuf_client (we will recreate it later) */
+			destroy_doorbell(client);
+			recreate_first_client = true;
+		}
+
+		ret = __reset_doorbell(client, db_id);
+		WARN(ret, "Doorbell %u reset failed, err %d\n", db_id, ret);
 	}
 
-	/* Read back & verify all doorbell registers */
-	for (i = 0; i < GUC_NUM_DOORBELLS; ++i)
-		WARN_ON(!doorbell_ok(guc, i));
+	if (recreate_first_client) {
+		ret = __reserve_doorbell(client);
+		if (unlikely(ret)) {
+			DRM_ERROR("Couldn't re-reserve first client db: %d\n", ret);
+			return ret;
+		}
 
-	err = __reserve_doorbell(client);
-	if (err)
-		return err;
+		__update_doorbell_desc(client, client->doorbell_id);
+	}
 
-	err = __update_doorbell_desc(client, client->doorbell_id);
-	if (err)
-		goto err_reserve;
+	/* Now for every client (and not only execbuf_client) make sure their
+	 * doorbells are known by the GuC */
+	//for (client = client_list; client != NULL; client = client->next)
+	{
+		ret = __create_doorbell(client);
+		if (ret) {
+			DRM_ERROR("Couldn't recreate client %u doorbell: %d\n",
+				client->ctx_index, ret);
+			return ret;
+		}
+	}
 
-	err = __create_doorbell(client);
-	if (err)
-		goto err_update;
+	/* Read back & verify all (used & unused) doorbell registers */
+	for (db_id = 0; db_id < GUC_NUM_DOORBELLS; ++db_id)
+		WARN_ON(!doorbell_ok(guc, db_id));
 
 	return 0;
-err_reserve:
-	__unreserve_doorbell(client);
-err_update:
-	__update_doorbell_desc(client, GUC_DOORBELL_INVALID);
-	return err;
 }
 
 /**
@@ -923,11 +953,9 @@ static int guc_init_doorbell_hw(struct intel_guc *guc)
 	guc_proc_desc_init(guc, client);
 	guc_ctx_desc_init(guc, client);
 
-	/* FIXME: Runtime client allocation (which currently we don't do) will
-	 * require that the doorbell gets created now. The static execbuf_client
-	 * is now getting its doorbell later (on submission enable) but maybe we
-	 * also want to reorder things in the future so that we don't have to
-	 * special case the doorbell creation */
+	ret = create_doorbell(client);
+	if (ret)
+		goto err_vaddr;
 
 	DRM_DEBUG_DRIVER("new priority %u client %p for engine(s) 0x%x: ctx_index %u\n",
 			 priority, client, client->engines, client->ctx_index);
@@ -935,6 +963,9 @@ static int guc_init_doorbell_hw(struct intel_guc *guc)
 			 client->doorbell_id, client->doorbell_offset);
 
 	return client;
+
+err_vaddr:
+	i915_gem_object_unpin_map(client->vma->obj);
 err_vma:
 	i915_vma_unpin_and_release(&client->vma);
 err_id:
@@ -944,6 +975,24 @@ static int guc_init_doorbell_hw(struct intel_guc *guc)
 	return ERR_PTR(ret);
 }
 
+static void guc_client_free(struct i915_guc_client *client)
+{
+	/*
+	 * XXX: wait for any outstanding submissions before freeing memory.
+	 * Be sure to drop any locks
+	 */
+
+	/* FIXME: in many cases, by the time we get here the GuC has been
+	 * reset, so we cannot destroy the doorbell properly. Ignore the
+	 * error message for now */
+	destroy_doorbell(client);
+	guc_ctx_desc_fini(client->guc, client);
+	i915_gem_object_unpin_map(client->vma->obj);
+	i915_vma_unpin_and_release(&client->vma);
+	ida_simple_remove(&client->guc->ctx_ids, client->ctx_index);
+	kfree(client);
+}
+
 static void guc_policies_init(struct guc_policies *policies)
 {
 	struct guc_policy *policy;
@@ -1035,8 +1084,8 @@ static void guc_ads_destroy(struct intel_guc *guc)
 }
 
 /*
- * Set up the memory resources to be shared with the GuC.  At this point,
- * we require just one object that can be mapped through the GGTT.
+ * Set up the memory resources to be shared with the GuC (via the GGTT)
+ * at firmware loading time.
  */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 {
@@ -1048,16 +1097,6 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	void *vaddr;
 	int ret;
 
-	if (!HAS_GUC_SCHED(dev_priv))
-		return 0;
-
-	/* Wipe bitmap & delete client in case of reinitialisation */
-	bitmap_clear(guc->doorbell_bitmap, 0, GUC_NUM_DOORBELLS);
-	i915_guc_submission_disable(dev_priv);
-
-	if (!i915.enable_guc_submission)
-		return 0;
-
 	if (guc->ctx_pool)
 		return 0;
 
@@ -1085,20 +1124,8 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 
 	ida_init(&guc->ctx_ids);
 
-	guc->execbuf_client = guc_client_alloc(dev_priv,
-					       INTEL_INFO(dev_priv)->ring_mask,
-					       GUC_CTX_PRIORITY_KMD_NORMAL,
-					       dev_priv->kernel_context);
-	if (IS_ERR(guc->execbuf_client)) {
-		DRM_ERROR("Failed to create GuC client for execbuf!\n");
-		ret = PTR_ERR(guc->execbuf_client);
-		goto err_ads;
-	}
-
 	return 0;
 
-err_ads:
-	guc_ads_destroy(guc);
 err_log:
 	intel_guc_log_destroy(guc);
 err_vaddr:
@@ -1112,11 +1139,6 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv)
 {
 	struct intel_guc *guc = &dev_priv->guc;
 
-	if (!i915.enable_guc_submission)
-		return 0;
-
-	guc_client_free(guc->execbuf_client);
-	guc->execbuf_client = NULL;
 	ida_destroy(&guc->ctx_ids);
 	guc_ads_destroy(guc);
 	intel_guc_log_destroy(guc);
@@ -1124,17 +1146,6 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv)
 	i915_vma_unpin_and_release(&guc->ctx_pool);
 }
 
-static void guc_reset_wq(struct i915_guc_client *client)
-{
-	struct guc_process_desc *desc = client->vaddr +
-					client->proc_desc_offset;
-
-	desc->head = 0;
-	desc->tail = 0;
-
-	client->wq_tail = 0;
-}
-
 static void guc_interrupts_capture(struct drm_i915_private *dev_priv)
 {
 	struct intel_engine_cs *engine;
@@ -1185,17 +1196,28 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 	enum intel_engine_id id;
 	int err;
 
-	if (!client)
-		return -ENODEV;
+	if (!client) {
+		client = guc_client_alloc(dev_priv,
+					  INTEL_INFO(dev_priv)->ring_mask,
+					  GUC_CTX_PRIORITY_KMD_NORMAL,
+					  dev_priv->kernel_context);
+		if (IS_ERR(client)) {
+			DRM_ERROR("Failed to create GuC client for execbuf!\n");
+			return PTR_ERR(client);
+		}
+
+		guc->execbuf_client = client;
+	}
 
 	err = intel_guc_sample_forcewake(guc);
 	if (err)
-		return err;
+		goto err_execbuf_client;
 
 	guc_reset_wq(client);
+
 	err = guc_init_doorbell_hw(guc);
 	if (err)
-		return err;
+		goto err_execbuf_client;
 
 	/* Take over from manual control of ELSP (execlists) */
 	guc_interrupts_capture(dev_priv);
@@ -1222,6 +1244,11 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 	}
 
 	return 0;
+
+err_execbuf_client:
+	guc_client_free(guc->execbuf_client);
+	guc->execbuf_client = NULL;
+	return err;
 }
 
 static void guc_interrupts_release(struct drm_i915_private *dev_priv)
@@ -1254,16 +1281,11 @@ void i915_guc_submission_disable(struct drm_i915_private *dev_priv)
 
 	guc_interrupts_release(dev_priv);
 
-	if (!guc->execbuf_client)
-		return;
-
-	/* FIXME: in many cases, by the time we get here the GuC has been
-	 * reset, so we cannot destroy the doorbell properly. Ignore the
-	 * error message for now */
-	destroy_doorbell(guc->execbuf_client);
-
 	/* Revert back to manual ELSP submission */
 	intel_engines_reset_default_submission(dev_priv);
+
+	guc_client_free(guc->execbuf_client);
+	guc->execbuf_client = NULL;
 }
 
 /**
@@ -1292,7 +1314,6 @@ int intel_guc_suspend(struct drm_i915_private *dev_priv)
 	return intel_guc_send(guc, data, ARRAY_SIZE(data));
 }
 
-
 /**
  * intel_guc_resume() - notify GuC resuming from suspend state
  * @dev_priv:	i915 device private
drivers/gpu/drm/i915/intel_uc.c +12 -9
index ea99c89..db52594 100644
@@ -126,13 +126,15 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	/* We need to notify the guc whenever we change the GGTT */
 	i915_ggtt_enable_guc(dev_priv);
 
-	/*
-	 * This is stuff we need to have available at fw load time
-	 * if we are planning to enable submission later
-	 */
-	ret = i915_guc_submission_init(dev_priv);
-	if (ret)
-		goto err_guc;
+	if (i915.enable_guc_submission) {
+		/*
+		 * This is stuff we need to have available at fw load time
+		 * if we are planning to enable submission later
+		 */
+		ret = i915_guc_submission_init(dev_priv);
+		if (ret)
+			goto err_guc;
+	}
 
 	/* WaEnableuKernelHeaderValidFix:skl */
 	/* WaEnableGuCBootHashCheckNotSet:skl,bxt,kbl */
@@ -187,7 +189,8 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 err_interrupts:
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
-	i915_guc_submission_fini(dev_priv);
+	if (i915.enable_guc_submission)
+		i915_guc_submission_fini(dev_priv);
 err_guc:
 	i915_ggtt_disable_guc(dev_priv);
 
@@ -210,8 +213,8 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	if (i915.enable_guc_submission) {
 		i915_guc_submission_disable(dev_priv);
 		gen9_disable_guc_interrupts(dev_priv);
+		i915_guc_submission_fini(dev_priv);
 	}
-	i915_guc_submission_fini(dev_priv);
 	i915_ggtt_disable_guc(dev_priv);
 }
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#19 lore raw

✓ Fi.CI.BAT: success for Various improvements around the GuC topic

In reply to Oscar Mateo
== Series Details ==

== Series Details ==

Series: Various improvements around the GuC topic
URL : https://patchwork.freedesktop.org/series/21726/
State : success

== Summary ==

Series 21726v1 Various improvements around the GuC topic
https://patchwork.freedesktop.org/api/1.0/series/21726/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 460s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time: 461s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 593s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 523s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 511s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 502s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 441s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 431s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 436s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 509s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 496s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 478s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 468s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 588s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 480s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 513s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time: 446s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 558s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 416s

8229a8c712c22ff8e94e3244d4fd942a7dcd89af drm-tip: 2017y-03m-23d-09h-57m-34s UTC integration manifest f003ba2 HAX Enable GuC loading & submission
43d51b6 drm/i915/guc: Move guc_interrupts_release next to guc_interrupts_capture 19b8f8a drm/i915/guc: Split out the mmio_white_list struct
22675ac drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage descriptor" 98c3280 drm/i915/guc: A little bit more of doorbell sanitization
a5d1810 drm/i915/guc: Wait for doorbell to be inactive before deallocating
cf3850d drm/i915/guc: Improve the GuC documentation & comments about proxy submissions 7112b1b drm/i915/guc: Make intel_guc_send a function pointer
cdbbc12 drm/i915/guc: Break out the GuC log extras into their own "runtime" struct 0009b27 drm/i915/guc: The Additional Data Struct (ADS) should get enabled together with GuC submission c11c121 drm/i915/guc: Add onion teardown to the GuC setup
d1a1ced drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access
5956a8b drm/i915/guc: Sanitize GuC client initialization

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4273/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#20 lore raw

Re: ✓ Fi.CI.BAT: success for Various improvements around the GuC topic

Merged this series except the HAX patch (also, reordered the S-o-b, R-b and Cc lines to canonical form), so do rebase your work.

Regards, Joonas

Quoted 53 lines · Patchwork

== Series Details ==

Series: Various improvements around the GuC topic URL   : https://patchwork.freedesktop.org/series/21726/
State : success

== Summary ==

Series 21726v1 Various improvements around the GuC topic
https://patchwork.freedesktop.org/api/1.0/series/21726/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 460s fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time: 461s fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 593s fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 523s fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 511s fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 502s fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 441s fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 431s fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 436s fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 509s fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 496s fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 478s fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 468s fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 588s fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 480s fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 513s fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time: 446s fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 558s fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 416s

8229a8c712c22ff8e94e3244d4fd942a7dcd89af drm-tip: 2017y-03m-23d-09h-57m-34s UTC integration manifest f003ba2 HAX Enable GuC loading & submission
43d51b6 drm/i915/guc: Move guc_interrupts_release next to guc_interrupts_capture 19b8f8a drm/i915/guc: Split out the mmio_white_list struct
22675ac drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage descriptor" 98c3280 drm/i915/guc: A little bit more of doorbell sanitization
a5d1810 drm/i915/guc: Wait for doorbell to be inactive before deallocating
cf3850d drm/i915/guc: Improve the GuC documentation & comments about proxy submissions 7112b1b drm/i915/guc: Make intel_guc_send a function pointer
cdbbc12 drm/i915/guc: Break out the GuC log extras into their own "runtime" struct 0009b27 drm/i915/guc: The Additional Data Struct (ADS) should get enabled together with GuC submission c11c121 drm/i915/guc: Add onion teardown to the GuC setup
d1a1ced drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access
5956a8b drm/i915/guc: Sanitize GuC client initialization

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4273/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 7 lines
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#21 lore raw

Re: ✓ Fi.CI.BAT: success for Various improvements around the GuC topic

Quoted 4 lines · Joonas Lahtinen

Merged this series except the HAX patch (also, reordered the S-o-b, R-b and Cc lines to canonical form), so do rebase your work.

Regards, Joonas

Thanks!

Quoted 47 lines · Patchwork
Quoted 46 lines

== Series Details ==

Series: Various improvements around the GuC topic
URL : https://patchwork.freedesktop.org/series/21726/
State : success

== Summary ==

Series 21726v1 Various improvements around the GuC topic
https://patchwork.freedesktop.org/api/1.0/series/21726/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 460s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time: 461s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 593s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 523s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 511s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 502s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 441s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 431s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 436s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 509s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 496s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 478s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 468s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 588s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 480s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 513s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time: 446s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 558s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 416s

8229a8c712c22ff8e94e3244d4fd942a7dcd89af drm-tip: 2017y-03m-23d-09h-57m-34s UTC integration manifest f003ba2 HAX Enable GuC loading & submission
43d51b6 drm/i915/guc: Move guc_interrupts_release next to guc_interrupts_capture 19b8f8a drm/i915/guc: Split out the mmio_white_list struct
22675ac drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage descriptor" 98c3280 drm/i915/guc: A little bit more of doorbell sanitization
a5d1810 drm/i915/guc: Wait for doorbell to be inactive before deallocating
cf3850d drm/i915/guc: Improve the GuC documentation & comments about proxy submissions 7112b1b drm/i915/guc: Make intel_guc_send a function pointer
cdbbc12 drm/i915/guc: Break out the GuC log extras into their own "runtime" struct 0009b27 drm/i915/guc: The Additional Data Struct (ADS) should get enabled together with GuC submission c11c121 drm/i915/guc: Add onion teardown to the GuC setup
d1a1ced drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access
5956a8b drm/i915/guc: Sanitize GuC client initialization

Quoted 7 lines
Quoted 7 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4273/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx