ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition
Subsystems (3)
Fabio Estevam
reviewerPATCH v3 1/2 ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition
From: Fabio Estevam <[email protected]>
The comment for the FSLSSI_I2S_RATES definition states that the driver currently only supports I2S slave mode, which is no longer correct.
As FSLSSI_I2S_RATES is the same as the standard SNDRV_PCM_RATE_CONTINUOUS, just remove its definition and its comments to make the code simpler.
---
Chnages since v1:
- Simply remove FSLSSI_I2S_RATES
sound/soc/fsl/fsl_ssi.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
sound/soc/fsl/fsl_ssi.c +2 -12
@@ -55,16 +55,6 @@#include "imx-pcm.h" /** -* FSLSSI_I2S_RATES: sample rates supported by the I2S -* -* This driver currently only supports the SSI running in I2S slave mode, -* which means the codec determines the sample rate. Therefore, we tell -* ALSA that we support all rates and let the codec driver decide what rates -* are really supported. -*/ -#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS - -/** * FSLSSI_I2S_FORMATS: audio formats supported by the SSI * * The SSI has a limitation in that the samples must be in the same byte
@@ -1212,14 +1202,14 @@ static struct snd_soc_dai_driver fsl_ssi_dai_template = { .stream_name = "CPU-Playback", .channels_min = 1, .channels_max = 32, - .rates = FSLSSI_I2S_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, .formats = FSLSSI_I2S_FORMATS, }, .capture = { .stream_name = "CPU-Capture", .channels_min = 1, .channels_max = 32, - .rates = FSLSSI_I2S_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, .formats = FSLSSI_I2S_FORMATS, }, .ops = &fsl_ssi_dai_ops,
Signature · 1 line
2.7.4
Fabio Estevam
reviewerPATCH v3 2/2 ASoC: fsl_ssi: Use the tolower() function
From: Fabio Estevam <[email protected]>
Code can be simplified by using the standard tolower() funtion.
---
Changes since v2:
- None
sound/soc/fsl/fsl_ssi.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-)
sound/soc/fsl/fsl_ssi.c +5 -8
@@ -35,6 +35,7 @@#include <linux/module.h> #include <linux/interrupt.h> #include <linux/clk.h> +#include <linux/ctype.h> #include <linux/device.h> #include <linux/delay.h> #include <linux/slab.h>
@@ -1315,14 +1316,10 @@ static struct snd_ac97_bus_ops fsl_ssi_ac97_ops = {*/ static void make_lowercase (char *s) { -char *p = s; -char c; - -while ((c = *p)) { -if ((c >='A' ) && (c <='Z' )) - *p = c + ('a' -'A' ); - p++; - } +if (!s) +return ; +for (; *s; s++) + *s =tolower (*s); } static int fsl_ssi_imx_probe(struct platform_device *pdev,
Signature · 1 line
2.7.4
Re: [PATCH v3 2/2] ASoC: fsl_ssi: Use the tolower() function
Quoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Code can be simplified by using the standard
tolower()funtion.Signed-off-by Fabio Estevam <[email protected]>
ACK
Quoted 9 lines · Fabio Estevam
The comment for the
FSLSSI_I2S_RATESdefinition states that the driver currently only supports I2S slave mode, which is no longer correct.As
FSLSSI_I2S_RATESis the same as the standardSNDRV_PCM_RATE_CONTINUOUS, just remove its definition and its comments to make the code simpler.Signed-off-by Fabio Estevam <[email protected]>
ACK
Mark Brown
maintainerApplied "ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition" to the asoc tree
In reply to Fabio EstevamThe patch
ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
580556774ad33adf427765d560f95f66cb01c295Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Wed, 5 Apr 2017 16:44:05 -0300
Subject: [PATCH] ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition
The comment for the FSLSSI_I2S_RATES definition states that the driver currently only supports I2S slave mode, which is no longer correct.
As FSLSSI_I2S_RATES is the same as the standard SNDRV_PCM_RATE_CONTINUOUS, just remove its definition and its comments to make the code simpler.
--- sound/soc/fsl/fsl_ssi.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
sound/soc/fsl/fsl_ssi.c +2 -12
@@ -55,16 +55,6 @@#include "imx-pcm.h" /** -* FSLSSI_I2S_RATES: sample rates supported by the I2S -* -* This driver currently only supports the SSI running in I2S slave mode, -* which means the codec determines the sample rate. Therefore, we tell -* ALSA that we support all rates and let the codec driver decide what rates -* are really supported. -*/ -#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS - -/** * FSLSSI_I2S_FORMATS: audio formats supported by the SSI * * The SSI has a limitation in that the samples must be in the same byte
@@ -1217,14 +1207,14 @@ static struct snd_soc_dai_driver fsl_ssi_dai_template = { .stream_name = "CPU-Playback", .channels_min = 1, .channels_max = 32, - .rates = FSLSSI_I2S_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, .formats = FSLSSI_I2S_FORMATS, }, .capture = { .stream_name = "CPU-Capture", .channels_min = 1, .channels_max = 32, - .rates = FSLSSI_I2S_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, .formats = FSLSSI_I2S_FORMATS, }, .ops = &fsl_ssi_dai_ops,
Signature · 1 line
2.11.0