Generic DMA-capable streaming device driver looking for home
Hi all,
We're writing a device driver and having some difficulty matching a subsystem to the driver/device properties. Can anyone help with direction?
These are some basic properties:
1) Device is used to carry generic data to/from userspace. It's a pair of dumb streams with one sink and one source for each direction (no addressable endpoints for the other side).
2) Data goes to/from a DMA engine in an FPGA at high throughput.
3) The driver enables userspace to queue multiple DMA-able buffers for asynchronous, pipelined data transfer. We currently use the videobuf2 API to provide the feature. We're not carrying video data in general, though.
It's a piece of a software-defined radio system, and while it can carry data from DACs/ADCs, the device is only a generic transport. It doesn't know what data it's carrying, so neither would the driver.
Some guidance would be greatly appreciated. Thanks! --Alex
Quoted 16 lines · Alex Williams
Hi all,
We're writing a device driver and having some difficulty matching a subsystem to the driver/device properties. Can anyone help with direction?
These are some basic properties:
1) Device is used to carry generic data to/from userspace. It's a pair of dumb streams with one sink and one source for each direction (no addressable endpoints for the other side).
2) Data goes to/from a DMA engine in an FPGA at high throughput.
3) The driver enables userspace to queue multiple DMA-able buffers for asynchronous, pipelined data transfer. We currently use the videobuf2 API to provide the feature. We're not carrying video data in general, though.
Quoted 5 lines
It's a piece of a software-defined radio system, and while it can carry data from DACs/ADCs, the device is only a generic transport. It doesn't know what data it's carrying, so neither would the driver.
Some guidance would be greatly appreciated. Thanks!
This might be close enough to hidma that Sinan would have suggestions?
Quoted 17 lines · Jon Masters
Quoted 16 lines · Alex Williams
Hi all,
We're writing a device driver and having some difficulty matching a subsystem to the driver/device properties. Can anyone help with direction?
These are some basic properties:
1) Device is used to carry generic data to/from userspace. It's a pair of dumb streams with one sink and one source for each direction (no addressable endpoints for the other side).
2) Data goes to/from a DMA engine in an FPGA at high throughput.
3) The driver enables userspace to queue multiple DMA-able buffers for asynchronous, pipelined data transfer. We currently use the videobuf2 API to provide the feature. We're not carrying video data in general, though.
Quoted 8 lines
Quoted 5 lines
It's a piece of a software-defined radio system, and while it can carry data from DACs/ADCs, the device is only a generic transport. It doesn't know what data it's carrying, so neither would the driver.
Some guidance would be greatly appreciated. Thanks!
This might be close enough to hidma that Sinan would have suggestions?
I added dmaengine group to CC above. I have recently experimented with a similar concept by hacking the rapidio code.
http://lxr.free-electrons.com/source/drivers/rapidio/devices/rio_mport_cdev.c
It sounds like your code belongs to dmaengine.
Quoted 2 lines
Signature · 3 lines
Sinan Kaya Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Quoted 27 lines · Sinan Kaya
Quoted 17 lines · Jon Masters
Quoted 16 lines · Alex Williams
Hi all,
We're writing a device driver and having some difficulty matching a subsystem to the driver/device properties. Can anyone help with direction?
These are some basic properties:
1) Device is used to carry generic data to/from userspace. It's a pair of dumb streams with one sink and one source for each direction (no addressable endpoints for the other side).
2) Data goes to/from a DMA engine in an FPGA at high throughput.
3) The driver enables userspace to queue multiple DMA-able buffers for asynchronous, pipelined data transfer. We currently use the videobuf2 API to provide the feature. We're not carrying video data in general, though.Quoted 8 lines
Quoted 5 lines
It's a piece of a software-defined radio system, and while it can carry data from DACs/ADCs, the device is only a generic transport. It doesn't know what data it's carrying, so neither would the driver.
Some guidance would be greatly appreciated. Thanks!
This might be close enough to hidma that Sinan would have suggestions?
Quoted 6 lines
I added dmaengine group to CC above. I have recently experimented with a similar concept by hacking the rapidio code.
http://lxr.free-electrons.com/source/drivers/rapidio/devices/rio_mport_cdev.c
It sounds like your code belongs to dmaengine.
If you want to be able to use the DMA from within different frameworks inside the kernel (e.g. ALSA for audio, V4L2 for video, IIO for general-purpose data converters) then DMAengine is the right place. If you only ever want to access the DMA from userspace application logic use VFIO.