Skip to contentSkip to conversation

Patch "ARM: dts: imx6sx-udoo-neo: Fix reboot hang" has been added to the 4.10-stable tree

PATCH [email protected] 1 participant 1 message May 9, 2017

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

ARM: dts: imx6sx-udoo-neo: Fix reboot hang

to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
arm-dts-imx6sx-udoo-neo-fix-reboot-hang.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 12aff99723901bcc0e2a6a34343a4f62c371fdd9 Mon Sep 17 00:00:00 2001

From: Fabio Estevam <[email protected]>
Date: Tue, 7 Feb 2017 17:14:14 -0200
Subject: ARM: dts: imx6sx-udoo-neo: Fix reboot hang

From: Fabio Estevam <[email protected]>

commit 12aff99723901bcc0e2a6a34343a4f62c371fdd9 upstream.

After issuing a 'reboot' command the imx6sx-udoo-neo board does not reboot as expected and it just hangs instead.

In mainline kernel only LDO enabled mode is supported. Do not provide arm-supply/soc-supply nodes in the device tree, so that the board operates in LDO enabled mode and can then successfully reboot via watchdog.

Fixes 76e691fc7653b85d39 ("ARM: dts: imx6sx: Add UDOO Neo support")
---
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi |    5 -----
 1 file changed, 5 deletions(-)
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +0 -5
@@ -77,11 +77,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

Patches currently in stable-queue which might be from [email protected] are

queue-4.10/arm-dts-imx6sx-udoo-neo-fix-reboot-hang.patch