Skip to contentSkip to conversation

drm/i915/vlv: Fix port B PLL opamp initialization

PATCH In review Imre Deak 2 participants 9 messages May 10, 2017

Subsystems (2)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/7 drm/i915/vlv: Fix port B PLL opamp initialization

The current code looks like a typo, the specification calls for setting bits 31:24 to 0x8C, while preserving bits 23:0. Fix things accordingly.

I'm not aware of the typo causing a real problem, so the fix is only for consistency.

---
 drivers/gpu/drm/i915/intel_display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +2 -2
index a190973..0a59c1d 100644
@@ -6369,8 +6369,8 @@ static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
 	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
 
 	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
-	reg_val &= 0x8cffffff;
-	reg_val = 0x8c000000;
+	reg_val &= 0x00ffffff;
+	reg_val |= 0x8c000000;
 	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
 
 	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 2/7 drm/i915/dp: Check error return during DPCD capability queries

The assumptions of these users of drm_dp_dpcd_readb() is that the passed in output buffer won't change in case of error, but this isn't guaranteed. Fix this by treating any error as the lack of the given capability.

In case of DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP an error would leave the buffer uninitialized even with the above assumption.

---
 drivers/gpu/drm/i915/intel_dp.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +12 -8
index 08834f7..4a6feb6 100644
@@ -3088,7 +3088,8 @@ static bool intel_dp_get_y_cord_status(struct intel_dp *intel_dp)
 {
 	uint8_t psr_caps = 0;
 
-	drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_CAPS, &psr_caps);
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_CAPS, &psr_caps) != 1)
+		return false;
 	return psr_caps & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
 }
 
@@ -3096,9 +3097,9 @@ static bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
 {
 	uint8_t dprx = 0;
 
-	drm_dp_dpcd_readb(&intel_dp->aux,
-			DP_DPRX_FEATURE_ENUMERATION_LIST,
-			&dprx);
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST,
+			      &dprx) != 1)
+		return false;
 	return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
 }
 
@@ -3106,7 +3107,9 @@ static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
 {
 	uint8_t alpm_caps = 0;
 
-	drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP, &alpm_caps);
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP,
+			      &alpm_caps) != 1)
+		return false;
 	return alpm_caps & DP_ALPM_CAP;
 }
 
@@ -3679,9 +3682,10 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
 		uint8_t frame_sync_cap;
 
 		dev_priv->psr.sink_support = true;
-		drm_dp_dpcd_readb(&intel_dp->aux,
-				  DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
-				  &frame_sync_cap);
+		if (drm_dp_dpcd_readb(&intel_dp->aux,
+				      DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
+				      &frame_sync_cap) != 1)
+			frame_sync_cap = 0;
 		dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
 		/* PSR2 needs frame sync as well */
 		dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#2 lore raw

PATCH 3/7 drm/i915/sdvo: Check error return from intel_sdvo_get_value()

In reply to Imre Deak

The current code assumes that 'enhancements' won't change in case of an error, but this isn't guaranteed. Fix things by treating any error as a lack of the given capability.

v2:
- Remove the now redundant init of enhancements. (Ville)

---
 drivers/gpu/drm/i915/intel_sdvo.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_sdvo.c +4 -5
index ef6fa87..6cc1812 100644
@@ -2875,11 +2875,10 @@ static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
 
 	BUILD_BUG_ON(sizeof(enhancements) != 2);
 
-	enhancements.response = 0;
-	intel_sdvo_get_value(intel_sdvo,
-			     SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
-			     &enhancements, sizeof(enhancements));
-	if (enhancements.response == 0) {
+	if (!intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+				  &enhancements, sizeof(enhancements)) ||
+	    enhancements.response == 0) {
 		DRM_DEBUG_KMS("No enhancement is supported\n");
 		return true;
 	}
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#3 lore raw

PATCH 4/7 drm/i915: Check error return when setting DMA mask

In reply to Imre Deak

Even though an error from these functions isn't fatal we still want to have a diagnostic message about it.

v2:
- Don't do assignments in if statements. (Jani)

---
 drivers/gpu/drm/i915/i915_gem_gtt.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +12 -4
index 8bab4ae..0178c9e 100644
@@ -2741,13 +2741,17 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt)
 	struct pci_dev *pdev = dev_priv->drm.pdev;
 	unsigned int size;
 	u16 snb_gmch_ctl;
+	int err;
 
 	/* TODO: We're not aware of mappable constraints on gen8 yet */
 	ggtt->mappable_base = pci_resource_start(pdev, 2);
 	ggtt->mappable_end = pci_resource_len(pdev, 2);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(39)))
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(39));
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(39));
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(39));
+	if (err)
+		DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
 
 	pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
 
@@ -2790,6 +2794,7 @@ static int gen6_gmch_probe(struct i915_ggtt *ggtt)
 	struct pci_dev *pdev = dev_priv->drm.pdev;
 	unsigned int size;
 	u16 snb_gmch_ctl;
+	int err;
 
 	ggtt->mappable_base = pci_resource_start(pdev, 2);
 	ggtt->mappable_end = pci_resource_len(pdev, 2);
@@ -2802,8 +2807,11 @@ static int gen6_gmch_probe(struct i915_ggtt *ggtt)
 		return -ENXIO;
 	}
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
+	if (err)
+		DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
 	pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
 
 	ggtt->stolen_size = gen6_get_stolen_size(snb_gmch_ctl);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#4 lore raw

PATCH 5/7 drm/i915: Check error return when converting pipe to connector

In reply to Imre Deak

An error from intel_get_pipe_from_connector() would mean a bug somewhere else, but we still should check for it to prevent some other more obscure bug later.

v2:
- Fall back to a reasonable default instead of bailing out in case of error. (Jani)
v3:
- Fix s/PIPE_INVALID/INVALID_PIPE/ typo. (Jani)
v4:
- Fix bogus bracing around WARN() condition. (Ville)

---
 drivers/gpu/drm/i915/intel_panel.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_panel.c +14 -3
index cb50c52..c8103f8 100644
@@ -888,10 +888,14 @@ static void pch_enable_backlight(struct intel_connector *connector)
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	struct intel_panel *panel = &connector->panel;
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
-	enum transcoder cpu_transcoder =
-		intel_pipe_to_cpu_transcoder(dev_priv, pipe);
+	enum transcoder cpu_transcoder;
 	u32 cpu_ctl2, pch_ctl1, pch_ctl2;
 
+	if (!WARN_ON_ONCE(pipe == INVALID_PIPE))
+		cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, pipe);
+	else
+		cpu_transcoder = TRANSCODER_EDP;
+
 	cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
 	if (cpu_ctl2 & BLM_PWM_ENABLE) {
 		DRM_DEBUG_KMS("cpu backlight already enabled\n");
@@ -973,6 +977,9 @@ static void i965_enable_backlight(struct intel_connector *connector)
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
 	u32 ctl, ctl2, freq;
 
+	if (WARN_ON_ONCE(pipe == INVALID_PIPE))
+		pipe = PIPE_A;
+
 	ctl2 = I915_READ(BLC_PWM_CTL2);
 	if (ctl2 & BLM_PWM_ENABLE) {
 		DRM_DEBUG_KMS("backlight already enabled\n");
@@ -1037,6 +1044,9 @@ static void bxt_enable_backlight(struct intel_connector *connector)
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
 	u32 pwm_ctl, val;
 
+	if (WARN_ON_ONCE(pipe == INVALID_PIPE))
+		pipe = PIPE_A;
+
 	/* Controller 1 uses the utility pin. */
 	if (panel->backlight.controller == 1) {
 		val = I915_READ(UTIL_PIN_CTL);
@@ -1093,7 +1103,8 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
 	if (!panel->backlight.present)
 		return;
 
-	DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
+	if (!WARN_ON_ONCE(pipe == INVALID_PIPE))
+		DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
 
 	mutex_lock(&dev_priv->backlight_lock);
 
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#5 lore raw

PATCH 6/7 drm/i915: Sanitize stolen memory size calculation

In reply to Imre Deak

On GEN8+ (not counting CHV) the calculation can in theory result in an incorrect sign extension with all upper bits set. In practice this is unlikely to happen since it would require 4GB of stolen memory set aside. For consistency still prevent the sign extension explicitly everywhere.

---
 drivers/gpu/drm/i915/i915_gem_gtt.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +7 -7
index 0178c9e..ac2b8f6 100644
@@ -2577,14 +2577,14 @@ static size_t gen6_get_stolen_size(u16 snb_gmch_ctl)
 {
 	snb_gmch_ctl >>= SNB_GMCH_GMS_SHIFT;
 	snb_gmch_ctl &= SNB_GMCH_GMS_MASK;
-	return snb_gmch_ctl << 25; /* 32 MB units */
+	return (size_t)snb_gmch_ctl << 25; /* 32 MB units */
 }
 
 static size_t gen8_get_stolen_size(u16 bdw_gmch_ctl)
 {
 	bdw_gmch_ctl >>= BDW_GMCH_GMS_SHIFT;
 	bdw_gmch_ctl &= BDW_GMCH_GMS_MASK;
-	return bdw_gmch_ctl << 25; /* 32 MB units */
+	return (size_t)bdw_gmch_ctl << 25; /* 32 MB units */
 }
 
 static size_t chv_get_stolen_size(u16 gmch_ctrl)
@@ -2598,11 +2598,11 @@ static size_t chv_get_stolen_size(u16 gmch_ctrl)
 	 * 0x17 to 0x1d: 4MB increments start at 36MB
 	 */
 	if (gmch_ctrl < 0x11)
-		return gmch_ctrl << 25;
+		return (size_t)gmch_ctrl << 25;
 	else if (gmch_ctrl < 0x17)
-		return (gmch_ctrl - 0x11 + 2) << 22;
+		return (size_t)(gmch_ctrl - 0x11 + 2) << 22;
 	else
-		return (gmch_ctrl - 0x17 + 9) << 22;
+		return (size_t)(gmch_ctrl - 0x17 + 9) << 22;
 }
 
 static size_t gen9_get_stolen_size(u16 gen9_gmch_ctl)
@@ -2611,10 +2611,10 @@ static size_t gen9_get_stolen_size(u16 gen9_gmch_ctl)
 	gen9_gmch_ctl &= BDW_GMCH_GMS_MASK;
 
 	if (gen9_gmch_ctl < 0xf0)
-		return gen9_gmch_ctl << 25; /* 32 MB units */
+		return (size_t)gen9_gmch_ctl << 25; /* 32 MB units */
 	else
 		/* 4MB increments starting at 0xf0 for 4MB */
-		return (gen9_gmch_ctl - 0xf0 + 1) << 22;
+		return (size_t)(gen9_gmch_ctl - 0xf0 + 1) << 22;
 }
 
 static int ggtt_probe_common(struct i915_ggtt *ggtt, u64 size)
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#6 lore raw

PATCH 7/7 drm/i915/lvds: Remove magic from PLL programming

In reply to Imre Deak

This looks like a left-over from enabling work. The spec defines CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED as reserved set, so follow this in the programming.

v2:
- Follow the spec to set CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED. (Ville)

---
 drivers/gpu/drm/i915/dvo_ch7017.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/dvo_ch7017.c +2 -2
index b3c7c19..80b3e16 100644
@@ -280,10 +280,10 @@ static void ch7017_mode_set(struct intel_dvo_device *dvo,
 			(0 << CH7017_PHASE_DETECTOR_SHIFT);
 	} else {
 		outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH;
-		lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
+		lvds_pll_feedback_div =
+			CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
 			(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
 			(3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
-		lvds_pll_feedback_div = 35;
 		lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) |
 			(0 << CH7017_PHASE_DETECTOR_SHIFT);
 		if (1) { /* XXX: dual channel panel detection.  Assume yes for now. */
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

✓ Fi.CI.BAT: success for series starting with [RESEND-CI,1/7] drm/i915/vlv: Fix port B PLL opamp initialization

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: series starting with [RESEND-CI,1/7] drm/i915/vlv: Fix port B PLL opamp initialization
URL : https://patchwork.freedesktop.org/series/24215/
State : success

== Summary ==

Series 24215v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/24215/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                pass       -> FAIL       (fi-snb-2600) fdo#100007
Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                dmesg-warn -> PASS       (fi-kbl-7560u) fdo#100125

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100125 https://bugs.freedesktop.org/show_bug.cgi?id=100125

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time:437s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time:433s
fi-bsw-n3050     total:278  pass:242  dwarn:0   dfail:0   fail:0   skip:36  time:582s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:514s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time:543s
fi-byt-j1900     total:278  pass:254  dwarn:0   dfail:0   fail:0   skip:24  time:494s
fi-byt-n2820     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:492s
fi-elk-e7500     total:278  pass:229  dwarn:0   dfail:0   fail:0   skip:49  time:411s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:413s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:416s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time:424s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:491s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:469s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:469s
fi-kbl-7560u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:573s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:473s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time:576s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time:470s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:494s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time:442s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:532s
fi-snb-2600      total:278  pass:248  dwarn:0   dfail:0   fail:1   skip:29  time:415s

01a0c509134a48188628034f6fae0cd92ce7809a drm-tip: 2017y-05m-10d-08h-26m-38s UTC integration manifest 41d8c75 drm/i915/lvds: Remove magic from PLL programming
f67fada drm/i915: Sanitize stolen memory size calculation
64c478e drm/i915: Check error return when converting pipe to connector
dabd6bd drm/i915: Check error return when setting DMA mask
310d3cd drm/i915/sdvo: Check error return from intel_sdvo_get_value()
e04831d drm/i915/dp: Check error return during DPCD capability queries
84e8fc5 drm/i915/vlv: Fix port B PLL opamp initialization

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4655/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#8 lore raw

Re: ✓ Fi.CI.BAT: success for series starting with [RESEND-CI,1/7] drm/i915/vlv: Fix port B PLL opamp initialization

Quoted 5 lines · Patchwork

== Series Details ==

Series: series starting with [RESEND-CI,1/7] drm/i915/vlv: Fix port B PLL opamp initialization
URL : https://patchwork.freedesktop.org/series/24215/
State : success

I pushed the patchset to -dinq, thanks for the review.

--Imre

Quoted 48 lines

== Summary ==

Series 24215v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/24215/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                pass       -> FAIL       (fi-snb-2600) fdo#100007
Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                dmesg-warn -> PASS       (fi-kbl-7560u) fdo#100125

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100125 https://bugs.freedesktop.org/show_bug.cgi?id=100125

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time:437s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time:433s
fi-bsw-n3050     total:278  pass:242  dwarn:0   dfail:0   fail:0   skip:36  time:582s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:514s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time:543s
fi-byt-j1900     total:278  pass:254  dwarn:0   dfail:0   fail:0   skip:24  time:494s
fi-byt-n2820     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:492s
fi-elk-e7500     total:278  pass:229  dwarn:0   dfail:0   fail:0   skip:49  time:411s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:413s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:416s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time:424s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:491s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:469s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:469s
fi-kbl-7560u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:573s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:473s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time:576s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time:470s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:494s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time:442s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:532s
fi-snb-2600      total:278  pass:248  dwarn:0   dfail:0   fail:1   skip:29  time:415s

01a0c509134a48188628034f6fae0cd92ce7809a drm-tip: 2017y-05m-10d-08h-26m-38s UTC integration manifest 41d8c75 drm/i915/lvds: Remove magic from PLL programming
f67fada drm/i915: Sanitize stolen memory size calculation
64c478e drm/i915: Check error return when converting pipe to connector
dabd6bd drm/i915: Check error return when setting DMA mask
310d3cd drm/i915/sdvo: Check error return from intel_sdvo_get_value()
e04831d drm/i915/dp: Check error return during DPCD capability queries
84e8fc5 drm/i915/vlv: Fix port B PLL opamp initialization

Quoted 3 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4655/

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx