mx6sabresd: Remove non-SPL targets
PATCH 1/1 mx6sabresd: Remove non-SPL targets
From: Fabio Estevam <[email protected]>
Now that mx6sabresd_spl_defconfig can be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed.
Signed-off-by Fabio Estevam <[email protected]>
---
This patch depends on my previous series where mx6dlsabresd SPL support has been added.
board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ------------------ board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 ------------------------ configs/mx6dlsabresd_defconfig | 44 ------ configs/mx6qsabresd_defconfig | 44 ------ 4 files changed, 388 deletions(-) delete mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg delete mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg delete mode 100644 configs/mx6dlsabresd_defconfig delete mode 100644 configs/mx6qsabresd_defconfig
board/freescale/mx6sabresd/mx6dlsabresd.cfg deleted +0 -131
@@ -1,131 +0,0 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ - -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ - -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e0774 0x000C0000 -DATA 4 0x020e0754 0x00000000 -DATA 4 0x020e04ac 0x00000030 -DATA 4 0x020e04b0 0x00000030 -DATA 4 0x020e0464 0x00000030 -DATA 4 0x020e0490 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0494 0x00000030 -DATA 4 0x020e04a0 0x00000000 -DATA 4 0x020e04b4 0x00000030 -DATA 4 0x020e04b8 0x00000030 -DATA 4 0x020e076c 0x00000030 -DATA 4 0x020e0750 0x00020000 -DATA 4 0x020e04bc 0x00000030 -DATA 4 0x020e04c0 0x00000030 -DATA 4 0x020e04c4 0x00000030 -DATA 4 0x020e04c8 0x00000030 -DATA 4 0x020e04cc 0x00000030 -DATA 4 0x020e04d0 0x00000030 -DATA 4 0x020e04d4 0x00000030 -DATA 4 0x020e04d8 0x00000030 -DATA 4 0x020e0760 0x00020000 -DATA 4 0x020e0764 0x00000030 -DATA 4 0x020e0770 0x00000030 -DATA 4 0x020e0778 0x00000030 -DATA 4 0x020e077c 0x00000030 -DATA 4 0x020e0780 0x00000030 -DATA 4 0x020e0784 0x00000030 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0748 0x00000030 -DATA 4 0x020e0470 0x00000030 -DATA 4 0x020e0474 0x00000030 -DATA 4 0x020e0478 0x00000030 -DATA 4 0x020e047c 0x00000030 -DATA 4 0x020e0480 0x00000030 -DATA 4 0x020e0484 0x00000030 -DATA 4 0x020e0488 0x00000030 -DATA 4 0x020e048c 0x00000030 -DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F -DATA 4 0x021b480c 0x001F001F -DATA 4 0x021b4810 0x001F001F -DATA 4 0x021b083c 0x4220021F -DATA 4 0x021b0840 0x0207017E -DATA 4 0x021b483c 0x4201020C -DATA 4 0x021b4840 0x01660172 -DATA 4 0x021b0848 0x4A4D4E4D -DATA 4 0x021b4848 0x4A4F5049 -DATA 4 0x021b0850 0x3F3C3D31 -DATA 4 0x021b4850 0x3238372B -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 -DATA 4 0x021b0004 0x0002002D -DATA 4 0x021b0008 0x00333030 -DATA 4 0x021b000c 0x3F435313 -DATA 4 0x021b0010 0xB66E8B63 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b0018 0x00001740 -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b002c 0x000026d2 -DATA 4 0x021b0030 0x00431023 -DATA 4 0x021b0040 0x00000027 -DATA 4 0x021b0000 0x831A0000 -DATA 4 0x021b001c 0x04008032 -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00048031 -DATA 4 0x021b001c 0x05208030 -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00011117 -DATA 4 0x021b4818 0x00011117 -DATA 4 0x021b0004 0x0002556D -DATA 4 0x021b0404 0x00011006 -DATA 4 0x021b001c 0x00000000 - -/* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0x00FFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg deleted +0 -169
169 lines not on this page · raw message
configs/mx6dlsabresd_defconfig deleted +0 -44
44 lines not on this page · raw message
configs/mx6qsabresd_defconfig deleted +0 -44
44 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 1/1 mx6sabresd: Remove non-SPL targets
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Now that
mx6sabresd_spl_defconfigcan be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed.Signed-off-by Fabio Estevam <[email protected]>
Reviewed-by Jagan Teki <[email protected]>
thanks!
Signature · 4 lines
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.
PATCH 1/1 mx6sabresd: Remove non-SPL targets
Quoted 9 lines · Jagan Teki
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Now that
mx6sabresd_spl_defconfigcan be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Jagan Teki <[email protected]>
Missing to update MAINTAINERS file, will change it here and send along with the series, is that OK?
thanks!
Signature · 4 lines
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.
PATCH 1/1 mx6sabresd: Remove non-SPL targets
Quoted 2 lines · Jagan Teki
Missing to update
MAINTAINERSfile, will change it here and send along with the series, is that OK?
Let me take care of it as I do have other changes as part of moving mx6sabresd to SPL.
Will send these patches later today with you on Cc.
Thanks,
Fabio Estevam