Skip to contentSkip to conversation

ARM: dts: imx7s: Avoid using dummy clocks for usdhc

PATCH New Fabio Estevam 2 participants 3 messages May 15, 2017

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx7s: Avoid using dummy clocks for usdhc

From: Fabio Estevam <[email protected]>

Use the proper usdhc clocks instead of passing dummy ones.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx7s.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx7s.dtsi +6 -6
index c4f12fd..843eb37 100644
@@ -934,8 +934,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;

@@ -946,8 +946,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;

@@ -958,8 +958,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 ARM: dts: imx7s: Avoid using dummy clocks for usdhc

Quoted 3 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Use the proper usdhc clocks instead of passing dummy ones.

That patch?

https://patchwork.kernel.org/patch/9674277/

Already applied I think...

--
Stefan

Quoted 43 lines
Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx7s.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx7s.dtsi +6 -6
index c4f12fd..843eb37 100644
@@ -934,8 +934,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;

@@ -946,8 +946,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;

@@ -958,8 +958,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;