Patch "USB: ene_usb6250: fix DMA to the stack" has been added to the 4.11-stable tree

PATCH [email protected] 1 participant 1 message May 22, 2017

Subsystems (3)

Stable branch USB USB mass storage driver

lore

Share & tools

lore

[email protected]

author maintainer Applied

2017-05-22 10:24 UTC #0 lore raw

This is a note to let you know that I've just added the patch titled

USB: ene_usb6250: fix DMA to the stack

to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     usb-ene_usb6250-fix-dma-to-the-stack.patch

and it can be found in the queue-4.11 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 628c2893d44876ddd11602400c70606ade62e129 Mon Sep 17 00:00:00 2001

From: Alan Stern <[email protected]>
Date: Tue, 16 May 2017 11:47:29 -0400
Subject: USB: ene_usb6250: fix DMA to the stack

From: Alan Stern <[email protected]>

commit 628c2893d44876ddd11602400c70606ade62e129 upstream.

The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations.

Signed-off-by Alan Stern <[email protected]>

Reported-and-tested-by Andreas Hartmann <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/usb/storage/ene_ub6250.c |   90 +++++++++++++++++++++++----------------
 1 file changed, 55 insertions(+), 35 deletions(-)

drivers/usb/storage/ene_ub6250.c +55 ~~-35~~

@@ -446,6 +446,10 @@ struct ms_lib_ctrl {
 #define SD_BLOCK_LEN  9
 
 struct ene_ub6250_info {
+
+	/* I/O bounce buffer */
+	u8		*bbuf;
+
 	/* for 6250 code */
 	struct SD_STATUS	SD_Status;
 	struct MS_STATUS	MS_Status;

@@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_da
 
 static void ene_ub6250_info_destructor(void *extra)
 {
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
 	if (!extra)
 		return;
+	kfree(info->bbuf);
 }
 
 static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)

@@ -860,8 +867,9 @@ static int ms_read_readpage(struct us_da
 		u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 	int result;
-	u8 ExtBuf[4];
 	u32 bn = PhyBlockAddr * 0x20 + PageNum;
 
 	result = ene_load_bincode(us, MS_RW_PATTERN);

@@ -901,7 +909,7 @@ static int ms_read_readpage(struct us_da
 	bcb->CDB[2]     = (unsigned char)(PhyBlockAddr>>16);
 	bcb->CDB[6]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;

@@ -910,9 +918,9 @@ static int ms_read_readpage(struct us_da
 	ExtraDat->status0  = 0x10;  /* Not yet,fireware support */
 
 	ExtraDat->status1  = 0x00;  /* Not yet,fireware support */
-	ExtraDat->ovrflg   = ExtBuf[0];
-	ExtraDat->mngflg   = ExtBuf[1];
-	ExtraDat->logadr   = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
 
 	return USB_STOR_TRANSPORT_GOOD;
 }

@@ -1332,8 +1340,9 @@ static int ms_lib_read_extra(struct us_d
 				u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 	int result;
-	u8 ExtBuf[4];
 
 	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);

@@ -1347,7 +1356,7 @@ static int ms_lib_read_extra(struct us_d
 	bcb->CDB[2]     = (unsigned char)(PhyBlock>>16);
 	bcb->CDB[6]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;

@@ -1355,9 +1364,9 @@ static int ms_lib_read_extra(struct us_d
 	ExtraDat->intr     = 0x80;  /* Not yet, waiting for fireware support */
 	ExtraDat->status0  = 0x10;  /* Not yet, waiting for fireware support */
 	ExtraDat->status1  = 0x00;  /* Not yet, waiting for fireware support */
-	ExtraDat->ovrflg   = ExtBuf[0];
-	ExtraDat->mngflg   = ExtBuf[1];
-	ExtraDat->logadr   = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
 
 	return USB_STOR_TRANSPORT_GOOD;
 }

@@ -1556,9 +1565,9 @@ static int ms_lib_scan_logicalblocknumbe
 	u16 PhyBlock, newblk, i;
 	u16 LogStart, LogEnde;
 	struct ms_lib_type_extdat extdat;
-	u8 buf[0x200];
 	u32 count = 0, index = 0;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
 		ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);

@@ -1572,14 +1581,16 @@ static int ms_lib_scan_logicalblocknumbe
 			}
 
 			if (count == PhyBlock) {
-				ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+				ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+						bbuf);
 				count += 0x80;
 			}
 			index = (PhyBlock % 0x80) * 4;
 
-			extdat.ovrflg = buf[index];
-			extdat.mngflg = buf[index+1];
-			extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+			extdat.ovrflg = bbuf[index];
+			extdat.mngflg = bbuf[index+1];
+			extdat.logadr = memstick_logaddr(bbuf[index+2],
+					bbuf[index+3]);
 
 			if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
 				ms_lib_setacquired_errorblock(us, PhyBlock);

@@ -2062,9 +2073,9 @@ static int ene_ms_init(struct us_data *u
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
-	u8 buf[0x200];
 	u16 MSP_BlockSize, MSP_UserAreaBlocks;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	printk(KERN_INFO "transport --- ENE_MSInit\n");

@@ -2083,13 +2094,13 @@ static int ene_ms_init(struct us_data *u
 	bcb->CDB[0]     = 0xF1;
 	bcb->CDB[1]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
 		printk(KERN_ERR "Execution MS Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 	/* the same part to test ENE */
-	info->MS_Status = *(struct MS_STATUS *)&buf[0];
+	info->MS_Status = *(struct MS_STATUS *) bbuf;
 
 	if (info->MS_Status.Insert && info->MS_Status.Ready) {
 		printk(KERN_INFO "Insert     = %x\n", info->MS_Status.Insert);

@@ -2098,15 +2109,15 @@ static int ene_ms_init(struct us_data *u
 		printk(KERN_INFO "IsMSPHG    = %x\n", info->MS_Status.IsMSPHG);
 		printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
 		if (info->MS_Status.IsMSPro) {
-			MSP_BlockSize      = (buf[6] << 8) | buf[7];
-			MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+			MSP_BlockSize      = (bbuf[6] << 8) | bbuf[7];
+			MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
 			info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
 		} else {
 			ms_card_init(us); /* Card is MS (to ms.c)*/
 		}
 		usb_stor_dbg(us, "MS Init Code OK !!\n");
 	} else {
-		usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+		usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
 		return USB_STOR_TRANSPORT_ERROR;
 	}

@@ -2116,9 +2127,9 @@ static int ene_ms_init(struct us_data *u
 static int ene_sd_init(struct us_data *us)
 {
 	int result;
-	u8  buf[0x200];
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	usb_stor_dbg(us, "transport --- ENE_SDInit\n");
 	/* SD Init Part-1 */

@@ -2152,17 +2163,17 @@ static int ene_sd_init(struct us_data *u
 	bcb->Flags              = US_BULK_FLAG_IN;
 	bcb->CDB[0]             = 0xF1;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
 		usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	info->SD_Status =  *(struct SD_STATUS *)&buf[0];
+	info->SD_Status =  *(struct SD_STATUS *) bbuf;
 	if (info->SD_Status.Insert && info->SD_Status.Ready) {
 		struct SD_STATUS *s = &info->SD_Status;
 
-		ene_get_card_status(us, (unsigned char *)&buf);
+		ene_get_card_status(us, bbuf);
 		usb_stor_dbg(us, "Insert     = %x\n", s->Insert);
 		usb_stor_dbg(us, "Ready      = %x\n", s->Ready);
 		usb_stor_dbg(us, "IsMMC      = %x\n", s->IsMMC);

@@ -2170,7 +2181,7 @@ static int ene_sd_init(struct us_data *u
 		usb_stor_dbg(us, "HiSpeed    = %x\n", s->HiSpeed);
 		usb_stor_dbg(us, "WtP        = %x\n", s->WtP);
 	} else {
-		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 	return USB_STOR_TRANSPORT_GOOD;

@@ -2180,13 +2191,15 @@ static int ene_sd_init(struct us_data *u
 static int ene_init(struct us_data *us)
 {
 	int result;
-	u8  misc_reg03 = 0;
+	u8  misc_reg03;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+	u8 *bbuf = info->bbuf;
 
-	result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+	result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
+	misc_reg03 = bbuf[0];
 	if (misc_reg03 & 0x01) {
 		if (!info->SD_Status.Ready) {
 			result = ene_sd_init(us);

@@ -2303,8 +2316,9 @@ static int ene_ub6250_probe(struct usb_i
 			 const struct usb_device_id *id)
 {
 	int result;
-	u8  misc_reg03 = 0;
+	u8  misc_reg03;
 	struct us_data *us;
+	struct ene_ub6250_info *info;
 
 	result = usb_stor_probe1(&us, intf, id,
 		   (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,

@@ -2313,11 +2327,16 @@ static int ene_ub6250_probe(struct usb_i
 		return result;
 
 	/* FIXME: where should the code alloc extra buf ? */
-	if (!us->extra) {
-		us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
-		if (!us->extra)
-			return -ENOMEM;
-		us->extra_destructor = ene_ub6250_info_destructor;
+	us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+	if (!us->extra)
+		return -ENOMEM;
+	us->extra_destructor = ene_ub6250_info_destructor;
+
+	info = (struct ene_ub6250_info *)(us->extra);
+	info->bbuf = kmalloc(512, GFP_KERNEL);
+	if (!info->bbuf) {
+		kfree(us->extra);
+		return -ENOMEM;
 	}
 
 	us->transport_name = "ene_ub6250";

@@ -2329,12 +2348,13 @@ static int ene_ub6250_probe(struct usb_i
 		return result;
 
 	/* probe card type */
-	result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+	result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
 	if (result != USB_STOR_XFER_GOOD) {
 		usb_stor_disconnect(intf);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
+	misc_reg03 = info->bbuf[0];
 	if (!(misc_reg03 & 0x01)) {
 		pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
 			"It does not support SM cards.\n");

Patches currently in stable-queue which might be from [email protected] are

queue-4.11/usb-ene_usb6250-fix-dma-to-the-stack.patch