Skip to contentSkip to conversation

Patch "rtlwifi: rtl8821ae: setup 8812ae RFE according to device type" has been added to the 4.11-stable tree

PATCH [email protected] 1 participant 1 message May 22, 2017

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

rtlwifi: rtl8821ae: setup 8812ae RFE according to device type

to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     rtlwifi-rtl8821ae-setup-8812ae-rfe-according-to-device-type.patch

and it can be found in the queue-4.11 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 46cfa2148e7371c537efff1a1c693e58f523089d Mon Sep 17 00:00:00 2001

From: Larry Finger <[email protected]>
Date: Sun, 16 Apr 2017 19:32:07 -0500
Subject: rtlwifi: rtl8821ae: setup 8812ae RFE according to device type

From: Larry Finger <[email protected]>

commit 46cfa2148e7371c537efff1a1c693e58f523089d upstream.

Current channel switch implementation sets 8812ae RFE reg value assuming that device always has type 2.

Extend possible RFE types set and write corresponding reg values.

Source for new code is
http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip

---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c |  122 ++++++++++++++++---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h |    1 
 2 files changed, 107 insertions(+), 16 deletions(-)
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c +106 -16
@@ -358,6 +358,107 @@ bool rtl8821ae_phy_rf_config(struct ieee
 	return rtl8821ae_phy_rf6052_config(hw);
 }
 
+static void _rtl8812ae_phy_set_rfe_reg_24g(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp;
+
+	switch (rtlhal->rfe_type) {
+	case 3:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x54337770);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x54337770);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, 0x900, 0x00000303, 0x1);
+		break;
+	case 4:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77777777);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x001);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x001);
+		break;
+	case 5:
+		rtl_write_byte(rtlpriv, RA_RFE_PINMUX + 2, 0x77);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+		tmp = rtl_read_byte(rtlpriv, RA_RFE_INV + 3);
+		rtl_write_byte(rtlpriv, RA_RFE_INV + 3, tmp & ~0x1);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+		break;
+	case 1:
+		if (rtlpriv->btcoexist.bt_coexistence) {
+			rtl_set_bbreg(hw, RA_RFE_PINMUX, 0xffffff, 0x777777);
+			rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+				      0x77777777);
+			rtl_set_bbreg(hw, RA_RFE_INV, 0x33f00000, 0x000);
+			rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+			break;
+		}
+	case 0:
+	case 2:
+	default:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77777777);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x000);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+		break;
+	}
+}
+
+static void _rtl8812ae_phy_set_rfe_reg_5g(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp;
+
+	switch (rtlhal->rfe_type) {
+	case 0:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77337717);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337717);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+		break;
+	case 1:
+		if (rtlpriv->btcoexist.bt_coexistence) {
+			rtl_set_bbreg(hw, RA_RFE_PINMUX, 0xffffff, 0x337717);
+			rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+				      0x77337717);
+			rtl_set_bbreg(hw, RA_RFE_INV, 0x33f00000, 0x000);
+			rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+		} else {
+			rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
+				      0x77337717);
+			rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+				      0x77337717);
+			rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x000);
+			rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+		}
+		break;
+	case 3:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x54337717);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x54337717);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, 0x900, 0x00000303, 0x1);
+		break;
+	case 5:
+		rtl_write_byte(rtlpriv, RA_RFE_PINMUX + 2, 0x33);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337777);
+		tmp = rtl_read_byte(rtlpriv, RA_RFE_INV + 3);
+		rtl_write_byte(rtlpriv, RA_RFE_INV + 3, tmp | 0x1);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+		break;
+	case 2:
+	case 4:
+	default:
+		rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77337777);
+		rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337777);
+		rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+		rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+		break;
+	}
+}
+
 u32 phy_get_tx_swing_8812A(struct ieee80211_hw *hw, u8	band,
 			   u8 rf_path)
 {
@@ -552,14 +653,9 @@ void rtl8821ae_phy_switch_wirelessband(s
 			/* 0x82C[1:0] = 2b'00 */
 			rtl_set_bbreg(hw, 0x82c, 0x3, 0);
 		}
-		if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
-			rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
-				      0x77777777);
-			rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
-				      0x77777777);
-			rtl_set_bbreg(hw, RA_RFE_INV, 0x3ff00000, 0x000);
-			rtl_set_bbreg(hw, RB_RFE_INV, 0x3ff00000, 0x000);
-		}
+
+		if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE)
+			_rtl8812ae_phy_set_rfe_reg_24g(hw);
 
 		rtl_set_bbreg(hw, RTXPATH, 0xf0, 0x1);
 		rtl_set_bbreg(hw, RCCK_RX, 0x0f000000, 0x1);
@@ -614,14 +710,8 @@ void rtl8821ae_phy_switch_wirelessband(s
 			/* 0x82C[1:0] = 2'b00 */
 			rtl_set_bbreg(hw, 0x82c, 0x3, 1);
 
-		if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
-			rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
-				      0x77337777);
-			rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
-				      0x77337777);
-			rtl_set_bbreg(hw, RA_RFE_INV, 0x3ff00000, 0x010);
-			rtl_set_bbreg(hw, RB_RFE_INV, 0x3ff00000, 0x010);
-		}
+		if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE)
+			_rtl8812ae_phy_set_rfe_reg_5g(hw);
 
 		rtl_set_bbreg(hw, RTXPATH, 0xf0, 0);
 		rtl_set_bbreg(hw, RCCK_RX, 0x0f000000, 0xf);
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h +1 -0
@@ -2424,6 +2424,7 @@
 #define	BMASKH4BITS			0xf0000000
 #define BMASKOFDM_D			0xffc00000
 #define	BMASKCCK			0x3f3f3f3f
+#define BMASKRFEINV			0x3ff00000
 
 #define BRFREGOFFSETMASK		0xfffff
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.11/rtlwifi-rtl8821ae-setup-8812ae-rfe-according-to-device-type.patch