Skip to contentSkip to conversation

Patch "net: phy: marvell: Limit errata to 88m1101" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Jun 2, 2017

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

net: phy: marvell: Limit errata to 88m1101

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     net-phy-marvell-limit-errata-to-88m1101.patch

and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From f2899788353c13891412b273fdff5f02d49aa40f Mon Sep 17 00:00:00 2001

From: Andrew Lunn <[email protected]>
Date: Tue, 23 May 2017 17:49:13 +0200
Subject: net: phy: marvell: Limit errata to 88m1101

From: Andrew Lunn <[email protected]>

commit f2899788353c13891412b273fdff5f02d49aa40f upstream.

The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101.

Fixes 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
---
 drivers/net/phy/marvell.c |   66 +++++++++++++++++++++++++---------------------
 1 file changed, 37 insertions(+), 29 deletions(-)
drivers/net/phy/marvell.c +37 -29
@@ -203,34 +203,6 @@ static int marvell_config_aneg(struct ph
 {
 	int err;
 
-	/* The Marvell PHY has an errata which requires
-	 * that certain registers get written in order
-	 * to restart autonegotiation */
-	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x1f);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x200c);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x5);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x100);
-	if (err < 0)
-		return err;
-
 	err = marvell_set_polarity(phydev, phydev->mdix);
 	if (err < 0)
 		return err;
@@ -264,6 +236,42 @@ static int marvell_config_aneg(struct ph
 	return 0;
 }
 
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* This Marvell PHY has an errata which requires
+	 * that certain registers get written in order
+	 * to restart autonegotiation
+	 */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x1f);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x200c);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x5);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x100);
+	if (err < 0)
+		return err;
+
+	return marvell_config_aneg(phydev);
+}
+
 #ifdef CONFIG_OF_MDIO
 /*
  * Set and/or override some configuration registers based on the
@@ -993,7 +1001,7 @@ static struct phy_driver marvell_drivers
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
-		.config_aneg = &marvell_config_aneg,
+		.config_aneg = &m88e1101_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/net-phy-marvell-limit-errata-to-88m1101.patch