Skip to contentSkip to conversation

drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated

PATCH Superseded Manasi Navare 3 participants 5 messages Jun 8, 2017 – Aug 15, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated

This function now takes the link rate and lane ocunt to be validated as an argument so that this can be used for validating even the compliance test link parameters.

---
 drivers/gpu/drm/i915/intel_dp.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +8 -6
index db51338..dd01ab8 100644
@@ -322,19 +322,20 @@ static int intel_dp_common_len_rate_limit(struct intel_dp *intel_dp,
 	return 0;
 }
 
-static bool intel_dp_link_params_valid(struct intel_dp *intel_dp)
+static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
+				       uint8_t lane_count)
 {
 	/*
 	 * FIXME: we need to synchronize the current link parameters with
 	 * hardware readout. Currently fast link training doesn't work on
 	 * boot-up.
 	 */
-	if (intel_dp->link_rate == 0 ||
-	    intel_dp->link_rate > intel_dp->max_link_rate)
+	if (link_rate == 0 ||
+	    link_rate > intel_dp->max_link_rate)
 		return false;
 
-	if (intel_dp->lane_count == 0 ||
-	    intel_dp->lane_count > intel_dp_max_lane_count(intel_dp))
+	if (lane_count == 0 ||
+	    lane_count > intel_dp_max_lane_count(intel_dp))
 		return false;
 
 	return true;
@@ -4260,7 +4261,8 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	 * Validate the cached values of intel_dp->link_rate and
 	 * intel_dp->lane_count before attempting to retrain.
 	 */
-	if (!intel_dp_link_params_valid(intel_dp))
+	if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate,
+					intel_dp->lane_count))
 		return;
 
 	/* Retrain if Channel EQ or CR not ok */
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v2 2/2 drm/i915/dp: Validate the compliance test link parameters

Validate the compliance test link parameters when the compliance test dpcd registers are read. Also validate them in compute_config before using them since the max values might have been reduced due to link training fallback.

If either the link rate or lane count is invalid, we still bail from using the test parameters since the combination would not work and instead use the fallback values.

v2:
* Added commit message to explain why we still bail when either of of the params is invalid (Ville Syrjala)
* Add reason for validating in the comment (Jani Nikula)
* Also check if index >= 0 after validating (Jani Nikula)

Cc Jani Nikula <[email protected]>
Cc Ville Syrjala <[email protected]>
---
 drivers/gpu/drm/i915/intel_dp.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +17 -17
index dd01ab8..23dbdef 100644
@@ -1678,12 +1678,18 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
 		int index;
 
-		index = intel_dp_rate_index(intel_dp->common_rates,
-					    intel_dp->num_common_rates,
-					    intel_dp->compliance.test_link_rate);
-		if (index >= 0)
-			min_clock = max_clock = index;
-		min_lane_count = max_lane_count = intel_dp->compliance.test_lane_count;
+		/* Validate the compliance test data since max values
+		 * might have changed due to link train fallback.
+		 */
+		if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate,
+					       intel_dp->compliance.test_lane_count)) {
+			index = intel_dp_rate_index(intel_dp->common_rates,
+						    intel_dp->num_common_rates,
+						    intel_dp->compliance.test_link_rate);
+			if (index >= 0)
+				min_clock = max_clock = index;
+			min_lane_count = max_lane_count = intel_dp->compliance.test_lane_count;
+		}
 	}
 	DRM_DEBUG_KMS("DP link computation with max lane count %i "
 		      "max bw %d pixel clock %iKHz\n",
@@ -3961,8 +3967,7 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
 static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 {
 	int status = 0;
-	int min_lane_count = 1;
-	int link_rate_index, test_link_rate;
+	int test_link_rate;
 	uint8_t test_lane_count, test_link_bw;
 	/* (DP CTS 1.2)
 	 * 4.3.1.11
@@ -3976,10 +3981,6 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 		return DP_TEST_NAK;
 	}
 	test_lane_count &= DP_MAX_LANE_COUNT_MASK;
-	/* Validate the requested lane count */
-	if (test_lane_count < min_lane_count ||
-	    test_lane_count > intel_dp->max_link_lane_count)
-		return DP_TEST_NAK;
 
 	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
 				   &test_link_bw);
@@ -3987,12 +3988,11 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 		DRM_DEBUG_KMS("Link Rate read failed\n");
 		return DP_TEST_NAK;
 	}
-	/* Validate the requested link rate */
 	test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw);
-	link_rate_index = intel_dp_rate_index(intel_dp->common_rates,
-					      intel_dp->num_common_rates,
-					      test_link_rate);
-	if (link_rate_index < 0)
+
+	/* Validate the requested link rate and lane count */
+	if (!intel_dp_link_params_valid(intel_dp, test_link_rate,
+					test_lane_count))
 		return DP_TEST_NAK;
 
 	intel_dp->compliance.test_lane_count = test_lane_count;
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

✓ Fi.CI.BAT: success for series starting with [v2,1/2] drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v2,1/2] drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated
URL : https://patchwork.freedesktop.org/series/25506/
State : success

== Summary ==

Series 25506v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/25506/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time:444s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time:438s
fi-bsw-n3050     total:278  pass:242  dwarn:0   dfail:0   fail:0   skip:36  time:578s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:518s
fi-byt-j1900     total:278  pass:254  dwarn:0   dfail:0   fail:0   skip:24  time:487s
fi-byt-n2820     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:485s
fi-glk-2a        total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:594s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:435s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:408s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time:422s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:496s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:464s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:468s
fi-kbl-7560u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:562s
fi-kbl-r         total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time:572s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:459s
fi-skl-6700hq    total:278  pass:228  dwarn:1   dfail:0   fail:27  skip:22  time:409s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time:470s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:494s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time:443s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:539s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time:407s

5b363842b49a66879d4c67d652923fb04e44b271 drm-tip: 2017y-06m-08d-20h-34m-37s UTC integration manifest 5dc27c5 drm/i915/dp: Validate the compliance test link parameters
1d08555 drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4916/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
In reply to Manasi Navare

Can this be merged? It has a r-b from Jani Nikula.

Quoted 55 lines · Manasi Navare

This function now takes the link rate and lane ocunt to be validated as an argument so that this can be used for validating even the compliance test link parameters.

---
 drivers/gpu/drm/i915/intel_dp.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +8 -6
index db51338..dd01ab8 100644
@@ -322,19 +322,20 @@ static int intel_dp_common_len_rate_limit(struct intel_dp *intel_dp,
 	return 0;
 }
 
-static bool intel_dp_link_params_valid(struct intel_dp *intel_dp)
+static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
+				       uint8_t lane_count)
 {
 	/*
 	 * FIXME: we need to synchronize the current link parameters with
 	 * hardware readout. Currently fast link training doesn't work on
 	 * boot-up.
 	 */
-	if (intel_dp->link_rate == 0 ||
-	    intel_dp->link_rate > intel_dp->max_link_rate)
+	if (link_rate == 0 ||
+	    link_rate > intel_dp->max_link_rate)
 		return false;
 
-	if (intel_dp->lane_count == 0 ||
-	    intel_dp->lane_count > intel_dp_max_lane_count(intel_dp))
+	if (lane_count == 0 ||
+	    lane_count > intel_dp_max_lane_count(intel_dp))
 		return false;
 
 	return true;
@@ -4260,7 +4261,8 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	 * Validate the cached values of intel_dp->link_rate and
 	 * intel_dp->lane_count before attempting to retrain.
 	 */
-	if (!intel_dp_link_params_valid(intel_dp))
+	if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate,
+					intel_dp->lane_count))
 		return;
 
 	/* Retrain if Channel EQ or CR not ok */
Signature · 1 line
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#4 lore raw
Quoted 1 line · Manasi Navare

Can this be merged? It has a r-b from Jani Nikula.

Both pushed, sorry for the delay.

BR,
Jani.

Quoted 58 lines · Manasi Navare
Quoted 55 lines

This function now takes the link rate and lane ocunt to be validated as an argument so that this can be used for validating even the compliance test link parameters.

---
 drivers/gpu/drm/i915/intel_dp.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +8 -6
index db51338..dd01ab8 100644
@@ -322,19 +322,20 @@ static int intel_dp_common_len_rate_limit(struct intel_dp *intel_dp,
 	return 0;
 }
 
-static bool intel_dp_link_params_valid(struct intel_dp *intel_dp)
+static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
+				       uint8_t lane_count)
 {
 	/*
 	 * FIXME: we need to synchronize the current link parameters with
 	 * hardware readout. Currently fast link training doesn't work on
 	 * boot-up.
 	 */
-	if (intel_dp->link_rate == 0 ||
-	    intel_dp->link_rate > intel_dp->max_link_rate)
+	if (link_rate == 0 ||
+	    link_rate > intel_dp->max_link_rate)
 		return false;
 
-	if (intel_dp->lane_count == 0 ||
-	    intel_dp->lane_count > intel_dp_max_lane_count(intel_dp))
+	if (lane_count == 0 ||
+	    lane_count > intel_dp_max_lane_count(intel_dp))
 		return false;
 
 	return true;
@@ -4260,7 +4261,8 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	 * Validate the cached values of intel_dp->link_rate and
 	 * intel_dp->lane_count before attempting to retrain.
 	 */
-	if (!intel_dp_link_params_valid(intel_dp))
+	if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate,
+					intel_dp->lane_count))
 		return;
 
 	/* Retrain if Channel EQ or CR not ok */
Signature · 1 line
2.1.4
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx