Skip to contentSkip to conversation

tests: Increase value of I915_MAX_PIPES to 6

PATCH Superseded [email protected] 4 participants 4 messages Jun 9, 2017 – Jun 12, 2017 1 message not in the archive Library code

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 tests: Increase value of I915_MAX_PIPES to 6

From: "Leo (Sunpeng) Li" <[email protected]>

Increasing max pipe count to 6 to support AMD GPU's.

Since some tests' behavior depends on this value, small changes are made to remove this dependency:

* kms_ccs: Early abort if wanted_pipe is out-of-bounds.
* kms_concurrent: Check if pipe is within bounds first.
* kms_pipe_color: Prevent skipping of subsequent tests by placing generated tests in a 'igt_subtest_group'.
* kms_plane: Move pipe and plane index checking to subtest group level.

v2: Change invalid pipe check on kmstest_pipe_name() to use I915_MAX_PIPE

---
 lib/igt_kms.c          | 10 ++++++++--
 lib/igt_kms.h          |  3 +++
 tests/kms_ccs.c        |  2 ++
 tests/kms_concurrent.c |  2 +-
 tests/kms_pipe_color.c |  3 ++-
 tests/kms_plane.c      |  8 +++++---
 6 files changed, 21 insertions(+), 7 deletions(-)
lib/igt_kms.c +8 -2
index c77716b..473094d 100644
@@ -319,12 +319,12 @@ const unsigned char* igt_kms_get_alt_edid(void)
  */
 const char *kmstest_pipe_name(enum pipe pipe)
 {
-	const char *str[] = { "A", "B", "C" };
+	const char *str[] = { "A", "B", "C", "D", "E", "F"};
 
 	if (pipe == PIPE_NONE)
 		return "None";
 
-	if (pipe > 2)
+	if (pipe >= I915_MAX_PIPES)
 		return "invalid";
 
 	return str[pipe];
@@ -344,6 +344,12 @@ int kmstest_pipe_to_index(char pipe)
 		return 1;
 	else if (pipe == 'C')
 		return 2;
+	else if (pipe == 'D')
+		return 3;
+	else if (pipe == 'E')
+		return 4;
+	else if (pipe == 'F')
+		return 5;
 	else
 		return -EINVAL;
 }
lib/igt_kms.h +3 -0
index 9567a26..8f7c2bb 100644
@@ -54,6 +54,9 @@ enum pipe {
         PIPE_A = 0,
         PIPE_B,
         PIPE_C,
+	PIPE_D,
+	PIPE_E,
+	PIPE_F,
         I915_MAX_PIPES
 };
 const char *kmstest_pipe_name(enum pipe pipe);
tests/kms_ccs.c +2 -0
index d829152..0795e3a 100644
@@ -250,6 +250,8 @@ static void test(data_t *data)
 	int valid_tests = 0;
 	enum pipe wanted_pipe = data->pipe;
 
+	igt_skip_on(wanted_pipe >= display->n_pipes);
+
 	for_each_pipe_with_valid_output(display, data->pipe, data->output) {
 		if (wanted_pipe != PIPE_NONE && data->pipe != wanted_pipe)
 			continue;
tests/kms_concurrent.c +1 -1
index b34540b..db06a37 100644
@@ -351,8 +351,8 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
 	igt_fixture {
 		int valid_tests = 0;
 
-		igt_require(data->display.pipes[pipe].n_planes > 0);
 		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
 
 		for_each_valid_output_on_pipe(&data->display, pipe, output)
 			valid_tests++;
tests/kms_pipe_color.c +2 -1
index fd58ac8..da49eb1 100644
@@ -1180,7 +1180,8 @@ igt_main
 	}
 
 	for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
-		run_tests_for_pipe(&data, pipe);
+		igt_subtest_group
+			run_tests_for_pipe(&data, pipe);
 
 	igt_subtest_f("invalid-lut-sizes")
 		invalid_lut_sizes(&data);
tests/kms_plane.c +5 -3
index e1bd467..34418ca 100644
@@ -354,9 +354,6 @@ test_plane_panning(data_t *data, enum pipe pipe, int plane,
 	igt_output_t *output;
 	int connected_outs = 0;
 
-	igt_skip_on(pipe >= data->display.n_pipes);
-	igt_skip_on(plane >= data->display.pipes[pipe].n_planes);
-
 	for_each_valid_output_on_pipe(&data->display, pipe, output) {
 		test_plane_panning_with_output(data, pipe, plane, output,
 						flags);
@@ -369,6 +366,11 @@ test_plane_panning(data_t *data, enum pipe pipe, int plane,
 static void
 run_tests_for_pipe_plane(data_t *data, enum pipe pipe)
 {
+	igt_fixture {
+		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
+	}
+
 	igt_subtest_f("plane-position-covered-pipe-%s-planes",
 		      kmstest_pipe_name(pipe)) {
 		int n_planes = data->display.pipes[pipe].n_planes;
Signature · 6 lines
2.7.4

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): 1497039476-20447-1-git-send-email-sunpeng.li-5C7GfCeVMHo@public.gmane.org

Acked-by Alex Deucher
#2 lore raw
Quoted 22 lines

-----Original Message-----
From: amd-gfx [mailto:[email protected]] On Behalf Of [email protected]
Sent: Friday, June 09, 2017 4:18 PM
To: [email protected]; [email protected]; Wentland, Harry
Cc: Li, Sun peng
Subject: [PATCH i-g-t v2] tests: Increase value of I915_MAX_PIPES to 6

From: "Leo (Sunpeng) Li" <[email protected]>

Increasing max pipe count to 6 to support AMD GPU's.

Since some tests' behavior depends on this value, small changes are made to remove this dependency:

* kms_ccs: Early abort if wanted_pipe is out-of-bounds.
* kms_concurrent: Check if pipe is within bounds first.
* kms_pipe_color: Prevent skipping of subsequent tests by placing generated tests in a 'igt_subtest_group'.
* kms_plane: Move pipe and plane index checking to subtest group level.

Quoted 4 lines

v2: Change invalid pipe check on kmstest_pipe_name() to use I915_MAX_PIPE

Quoted 130 lines
---
 lib/igt_kms.c          | 10 ++++++++--
 lib/igt_kms.h          |  3 +++
 tests/kms_ccs.c        |  2 ++
 tests/kms_concurrent.c |  2 +-
 tests/kms_pipe_color.c |  3 ++-
 tests/kms_plane.c      |  8 +++++---
 6 files changed, 21 insertions(+), 7 deletions(-)
lib/igt_kms.c +8 -2
index c77716b..473094d 100644
@@ -319,12 +319,12 @@ const unsigned char* igt_kms_get_alt_edid(void)
  */
 const char *kmstest_pipe_name(enum pipe pipe)
 {
-	const char *str[] = { "A", "B", "C" };
+	const char *str[] = { "A", "B", "C", "D", "E", "F"};
 
 	if (pipe == PIPE_NONE)
 		return "None";
 
-	if (pipe > 2)
+	if (pipe >= I915_MAX_PIPES)
 		return "invalid";
 
 	return str[pipe];
@@ -344,6 +344,12 @@ int kmstest_pipe_to_index(char pipe)
 		return 1;
 	else if (pipe == 'C')
 		return 2;
+	else if (pipe == 'D')
+		return 3;
+	else if (pipe == 'E')
+		return 4;
+	else if (pipe == 'F')
+		return 5;
 	else
 		return -EINVAL;
 }
lib/igt_kms.h +3 -0
index 9567a26..8f7c2bb 100644
@@ -54,6 +54,9 @@ enum pipe {
         PIPE_A = 0,
         PIPE_B,
         PIPE_C,
+	PIPE_D,
+	PIPE_E,
+	PIPE_F,
         I915_MAX_PIPES
 };
 const char *kmstest_pipe_name(enum pipe pipe);
tests/kms_ccs.c +2 -0
index d829152..0795e3a 100644
@@ -250,6 +250,8 @@ static void test(data_t *data)
 	int valid_tests = 0;
 	enum pipe wanted_pipe = data->pipe;
 
+	igt_skip_on(wanted_pipe >= display->n_pipes);
+
 	for_each_pipe_with_valid_output(display, data->pipe, data-
 >output) {
 		if (wanted_pipe != PIPE_NONE && data->pipe !=

wanted_pipe)

tests/kms_ccs.c +0 -0
 			continue;
tests/kms_concurrent.c +1 -1
index b34540b..db06a37 100644
@@ -351,8 +351,8 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
 	igt_fixture {
 		int valid_tests = 0;
 
-		igt_require(data->display.pipes[pipe].n_planes > 0);
 		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
 
 		for_each_valid_output_on_pipe(&data->display, pipe,
 output)
tests/kms_concurrent.c +0 -0
 			valid_tests++;
tests/kms_pipe_color.c +2 -1
index fd58ac8..da49eb1 100644
@@ -1180,7 +1180,8 @@ igt_main
 	}
 
 	for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
-		run_tests_for_pipe(&data, pipe);
+		igt_subtest_group
+			run_tests_for_pipe(&data, pipe);
 
 	igt_subtest_f("invalid-lut-sizes")
 		invalid_lut_sizes(&data);
tests/kms_plane.c +0 -3
index e1bd467..34418ca 100644
@@ -354,9 +354,6 @@ test_plane_panning(data_t *data, enum pipe pipe,
 int plane,
 	igt_output_t *output;
 	int connected_outs = 0;
 
-	igt_skip_on(pipe >= data->display.n_pipes);
-	igt_skip_on(plane >= data->display.pipes[pipe].n_planes);
-
 	for_each_valid_output_on_pipe(&data->display, pipe, output) {
 		test_plane_panning_with_output(data, pipe, plane, output,
tests/kms_plane.c +5 -0
 						flags);
@@ -369,6 +366,11 @@ test_plane_panning(data_t *data, enum pipe pipe,
 int plane,
 static void
 run_tests_for_pipe_plane(data_t *data, enum pipe pipe)
 {
+	igt_fixture {
+		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
+	}
+
 	igt_subtest_f("plane-position-covered-pipe-%s-planes",
 		      kmstest_pipe_name(pipe)) {

int n_planes = data->display.pipes[pipe].n_planes;
--
2.7.4

Quoted 4 lines

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

#3 lore raw
Quoted 22 lines · Alexander
Quoted 22 lines

-----Original Message-----
From: amd-gfx [mailto:[email protected]] On Behalf Of [email protected]
Sent: Friday, June 09, 2017 4:18 PM
To: [email protected]; [email protected]; Wentland, Harry
Cc: Li, Sun peng
Subject: [PATCH i-g-t v2] tests: Increase value of I915_MAX_PIPES to 6

From: "Leo (Sunpeng) Li" <[email protected]>

Increasing max pipe count to 6 to support AMD GPU's.

Since some tests' behavior depends on this value, small changes are made to remove this dependency:

* kms_ccs: Early abort if wanted_pipe is out-of-bounds.
* kms_concurrent: Check if pipe is within bounds first.
* kms_pipe_color: Prevent skipping of subsequent tests by placing generated tests in a 'igt_subtest_group'.
* kms_plane: Move pipe and plane index checking to subtest group level.

Quoted 6 lines
Quoted 4 lines

v2: Change invalid pipe check on kmstest_pipe_name() to use I915_MAX_PIPE

Hey all,

Same thing as with the pipe number patch - can you send patches to intel-gfx mailing list (CC is fine) as stated in the CONTRIBUTING file?

If it was CCed correctly then let me know, as we should figure out why was it filtered out.

Thanks!

Signature · 6 lines
Cheers,
Arek
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by
#4 lore raw
In reply to a message not in the archive
Quoted 63 lines · On 2017-06-09 04:17 PM, [email protected] wrote:

From: "Leo (Sunpeng) Li" <[email protected]>

Increasing max pipe count to 6 to support AMD GPU's.

Since some tests' behavior depends on this value, small changes are made to remove this dependency:

* kms_ccs: Early abort if wanted_pipe is out-of-bounds.
* kms_concurrent: Check if pipe is within bounds first.
* kms_pipe_color: Prevent skipping of subsequent tests by placing generated tests in a 'igt_subtest_group'.
* kms_plane: Move pipe and plane index checking to subtest group level.

v2: Change invalid pipe check on kmstest_pipe_name() to use I915_MAX_PIPE

---
 lib/igt_kms.c          | 10 ++++++++--
 lib/igt_kms.h          |  3 +++
 tests/kms_ccs.c        |  2 ++
 tests/kms_concurrent.c |  2 +-
 tests/kms_pipe_color.c |  3 ++-
 tests/kms_plane.c      |  8 +++++---
 6 files changed, 21 insertions(+), 7 deletions(-)
lib/igt_kms.c +8 -2
index c77716b..473094d 100644
@@ -319,12 +319,12 @@ const unsigned char* igt_kms_get_alt_edid(void)
  */
 const char *kmstest_pipe_name(enum pipe pipe)
 {
-	const char *str[] = { "A", "B", "C" };
+	const char *str[] = { "A", "B", "C", "D", "E", "F"};
 
 	if (pipe == PIPE_NONE)
 		return "None";
 
-	if (pipe > 2)
+	if (pipe >= I915_MAX_PIPES)
 		return "invalid";
 
 	return str[pipe];
@@ -344,6 +344,12 @@ int kmstest_pipe_to_index(char pipe)
 		return 1;
 	else if (pipe == 'C')
 		return 2;
+	else if (pipe == 'D')
+		return 3;
+	else if (pipe == 'E')
+		return 4;
+	else if (pipe == 'F')
+		return 5;
 	else
 		return -EINVAL;
 }
lib/igt_kms.h +0 -0
index 9567a26..8f7c2bb 100644

lib/igt_kms.h enum pipe { · line 59

Quoted 6 lines
lib/igt_kms.h +3 -0
@@ -54,6 +54,9 @@ enum pipe {
         PIPE_A = 0,
         PIPE_B,
         PIPE_C,
+	PIPE_D,
+	PIPE_E,
+	PIPE_F,

Original code has spaces but you use tabs here. Can you change this to spaces to stay consistent?

With that this patch is

Harry

Quoted 61 lines
lib/igt_kms.h +0 -0
         I915_MAX_PIPES
 };
 const char *kmstest_pipe_name(enum pipe pipe);
tests/kms_ccs.c +2 -0
index d829152..0795e3a 100644
@@ -250,6 +250,8 @@ static void test(data_t *data)
 	int valid_tests = 0;
 	enum pipe wanted_pipe = data->pipe;
 
+	igt_skip_on(wanted_pipe >= display->n_pipes);
+
 	for_each_pipe_with_valid_output(display, data->pipe, data->output) {
 		if (wanted_pipe != PIPE_NONE && data->pipe != wanted_pipe)
 			continue;
tests/kms_concurrent.c +1 -1
index b34540b..db06a37 100644
@@ -351,8 +351,8 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
 	igt_fixture {
 		int valid_tests = 0;
 
-		igt_require(data->display.pipes[pipe].n_planes > 0);
 		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
 
 		for_each_valid_output_on_pipe(&data->display, pipe, output)
 			valid_tests++;
tests/kms_pipe_color.c +2 -1
index fd58ac8..da49eb1 100644
@@ -1180,7 +1180,8 @@ igt_main
 	}
 
 	for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
-		run_tests_for_pipe(&data, pipe);
+		igt_subtest_group
+			run_tests_for_pipe(&data, pipe);
 
 	igt_subtest_f("invalid-lut-sizes")
 		invalid_lut_sizes(&data);
tests/kms_plane.c +0 -3
index e1bd467..34418ca 100644
@@ -354,9 +354,6 @@ test_plane_panning(data_t *data, enum pipe pipe, int plane,
 	igt_output_t *output;
 	int connected_outs = 0;
 
-	igt_skip_on(pipe >= data->display.n_pipes);
-	igt_skip_on(plane >= data->display.pipes[pipe].n_planes);
-
 	for_each_valid_output_on_pipe(&data->display, pipe, output) {
 		test_plane_panning_with_output(data, pipe, plane, output,
 						flags);
@@ -369,6 +366,11 @@ test_plane_panning(data_t *data, enum pipe pipe, int plane,
 static void

tests/kms_plane.c test_plane_panning(data_t *data, enum pipe pipe, int plane, · line 376

Quoted 10 lines
tests/kms_plane.c +5 -0
 run_tests_for_pipe_plane(data_t *data, enum pipe pipe)
 {
+	igt_fixture {
+		igt_skip_on(pipe >= data->display.n_pipes);
+		igt_require(data->display.pipes[pipe].n_planes > 0);
+	}
+
 	igt_subtest_f("plane-position-covered-pipe-%s-planes",
 		      kmstest_pipe_name(pipe)) {
 		int n_planes = data->display.pipes[pipe].n_planes;

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx