Patch "iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler" has been added to the 4.11-stable tree
Subsystems (3)
This is a note to let you know that I've just added the patch titled
iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-imu-st_lsm6dsx-do-not-apply-odr-configuration-in-write_raw-handler.patch
and it can be found in the queue-4.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
2ccc15036d812e75f334c0fb813104ef765a2c77Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <[email protected]>
Date: Sun, 2 Apr 2017 14:58:45 +0200
Subject: iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
From: Lorenzo Bianconi <[email protected]>
commit 2ccc15036d812e75f334c0fb813104ef765a2c77 upstream.
This patch allows to avoid a transitory that occurs when a given sensor has been already enabled (e.g. gyroscope) and the user is configuring the sample frequency of the other one (e.g. accelerometer). The transitory lasts until the accelerometer is enabled. During that time slice the gyroscope ODR is incorrectly modified as well. At the end of the transitory both sensors work at the right frequency. Fix it introducing st_lsm6dsx_check_odr() routine to check ODR consistency in write_raw handler in order to apply frequency configuration just in st_lsm6dsx_set_odr()
--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 41 +++++++++++++++++---------- 1 file changed, 26 insertions(+), 15 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +26 -15
@@ -298,32 +298,40 @@ static int st_lsm6dsx_set_full_scale(strreturn 0 ; } -static int st_lsm6dsx_set_odr (struct st_lsm6dsx_sensor *sensor,u16 odr) +static int st_lsm6dsx_check_odr (struct st_lsm6dsx_sensor *sensor,u16 odr, +u8 *val) { -enum st_lsm6dsx_sensor_id id = sensor->id; -int i, err; -u8 val; +int i;for (i =0 ; i <ST_LSM6DSX_ODR_LIST_SIZE ; i++) -if (st_lsm6dsx_odr_table[id].odr_avl[i].hz == odr) +if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz == odr)break ;if (i ==ST_LSM6DSX_ODR_LIST_SIZE )return -EINVAL ; - val = st_lsm6dsx_odr_table[id].odr_avl[i].val; - err =st_lsm6dsx_write_with_mask (sensor->hw, - st_lsm6dsx_odr_table[id].reg.addr, - st_lsm6dsx_odr_table[id].reg.mask, - val); -if (err <0 ) -return err; - + *val = st_lsm6dsx_odr_table[sensor->id].odr_avl[i].val; sensor->odr = odr;return 0 ; } +static int st_lsm6dsx_set_odr (struct st_lsm6dsx_sensor *sensor,u16 odr) +{ +enum st_lsm6dsx_sensor_id id = sensor->id; +int err; +u8 val; + + err =st_lsm6dsx_check_odr (sensor, odr, &val); +if (err <0 ) +return err; + +return st_lsm6dsx_write_with_mask (sensor->hw, + st_lsm6dsx_odr_table[id].reg.addr, + st_lsm6dsx_odr_table[id].reg.mask, + val); +} +int st_lsm6dsx_sensor_enable (struct st_lsm6dsx_sensor *sensor) {int err;
@@ -426,9 +434,12 @@ static int st_lsm6dsx_write_raw(struct icase IIO_CHAN_INFO_SCALE : err =st_lsm6dsx_set_full_scale (sensor, val2);break ; -case IIO_CHAN_INFO_SAMP_FREQ : - err =st_lsm6dsx_set_odr (sensor, val); +case IIO_CHAN_INFO_SAMP_FREQ : { +u8 data; + + err =st_lsm6dsx_check_odr (sensor, val, &data);break ; + }default : err = -EINVAL ;break ;
Patches currently in stable-queue which might be from [email protected] are
queue-4.11/iio-imu-st_lsm6dsx-do-not-apply-odr-configuration-in-write_raw-handler.patch