Skip to contentSkip to conversation

drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read

PATCH In review Manasi Navare 3 participants 4 messages Jun 22, 2017 – Jun 26, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read

When we read the VBT t11_t12 value for panel power cycle delay, it is a zero based value so we need to 100ms to that. And then it needs to be multiplied by 10 to store it in 100usecs unit same as SW VBT.

v3:
* Add it as part of series
v2:
* Change the VBT value instead of HW readout and pp div (Ville Syrjala)

---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +5 -0
index bca4ac1..be9e17a 100644
@@ -5234,6 +5234,11 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	intel_pps_dump_state("cur", &cur);
 
 	vbt = dev_priv->vbt.edp.pps;
+	/* T11_T12 delay is special and actually in units of 100ms, but zero
+	 * based in the hw (so we need to add 100 ms). But the sw vbt
+	 * table multiplies it with 1000 to make it in units of 100usec,
+	 * too. */
+	vbt.t11_t12 += 100 * 10;
 
 	/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
 	 * our hw here, which are all in 100usec. */
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v3 2/2 drm/i915/dp: Remove -1/+1 from t11_t12 for Gen9_LP/CNP case

Now the VBT.seq->t11_t12 value adds 100ms to both Gen9_LP as well as non Gen9_LP cases so no need to special case and do -1 during HW readout and +1 during pp_div write for Gen9_LP/CNP case.

---
 drivers/gpu/drm/i915/intel_dp.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -7
index be9e17a..67bc8a7a 100644
@@ -5178,12 +5178,8 @@ intel_pps_readout_hw_state(struct drm_i915_private *dev_priv,
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
-		u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
-			BXT_POWER_CYCLE_DELAY_SHIFT;
-		if (tmp > 0)
-			seq->t11_t12 = (tmp - 1) * 1000;
-		else
-			seq->t11_t12 = 0;
+		seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
+				BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
 	} else {
 		seq->t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
 		       PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
@@ -5342,7 +5338,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
-		pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
+		pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
 				<< BXT_POWER_CYCLE_DELAY_SHIFT);
 	} else {
 		pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v3 2/2
#2 lore raw

Re: [PATCH v3 2/2] drm/i915/dp: Remove -1/+1 from t11_t12 for Gen9_LP/CNP case

Quoted 9 lines · Manasi Navare

Now the VBT.seq->t11_t12 value adds 100ms to both Gen9_LP as well as non Gen9_LP cases so no need to special case and do -1 during HW readout and +1 during pp_div write for Gen9_LP/CNP case.

lgtm

Quoted 34 lines
---
 drivers/gpu/drm/i915/intel_dp.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -7
index be9e17a..67bc8a7a 100644
@@ -5178,12 +5178,8 @@ intel_pps_readout_hw_state(struct drm_i915_private *dev_priv,
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
-		u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
-			BXT_POWER_CYCLE_DELAY_SHIFT;
-		if (tmp > 0)
-			seq->t11_t12 = (tmp - 1) * 1000;
-		else
-			seq->t11_t12 = 0;
+		seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
+				BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
 	} else {
 		seq->t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
 		       PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
@@ -5342,7 +5338,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
-		pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
+		pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
 				<< BXT_POWER_CYCLE_DELAY_SHIFT);
 	} else {
 		pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
Signature · 1 line
2.1.4
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

✗ Fi.CI.BAT: failure for series starting with [v3,1/2] drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v3,1/2] drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read
URL : https://patchwork.freedesktop.org/series/26245/
State : failure

== Summary ==

Series 26245v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/26245/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                fail       -> PASS       (fi-snb-2600) fdo#100007
Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                dmesg-warn -> PASS       (fi-kbl-r) fdo#100125
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> PASS       (fi-byt-n2820) fdo#101516
        Subgroup suspend-read-crc-pipe-c:
                pass       -> FAIL       (fi-skl-6700k)
Test prime_busy:
        Subgroup basic-wait-after-default:
                dmesg-warn -> PASS       (fi-skl-6700hq) fdo#101515 +1

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100125 https://bugs.freedesktop.org/show_bug.cgi?id=100125
fdo#101516 https://bugs.freedesktop.org/show_bug.cgi?id=101516
fdo#101515 https://bugs.freedesktop.org/show_bug.cgi?id=101515

fi-bdw-5557u     total:279  pass:268  dwarn:0   dfail:0   fail:0   skip:11  time:437s
fi-bdw-gvtdvm    total:279  pass:257  dwarn:8   dfail:0   fail:0   skip:14  time:440s
fi-bsw-n3050     total:279  pass:242  dwarn:1   dfail:0   fail:0   skip:36  time:524s
fi-bxt-j4205     total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:507s
fi-byt-j1900     total:279  pass:253  dwarn:2   dfail:0   fail:0   skip:24  time:493s
fi-byt-n2820     total:279  pass:250  dwarn:1   dfail:0   fail:0   skip:28  time:489s
fi-glk-2a        total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:599s
fi-hsw-4770      total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:438s
fi-hsw-4770r     total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:417s
fi-ilk-650       total:279  pass:229  dwarn:0   dfail:0   fail:0   skip:50  time:419s
fi-ivb-3520m     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:494s
fi-ivb-3770      total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:482s
fi-kbl-7500u     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:467s
fi-kbl-7560u     total:279  pass:268  dwarn:1   dfail:0   fail:0   skip:10  time:570s
fi-kbl-r         total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:583s
fi-skl-6260u     total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:460s
fi-skl-6700hq    total:279  pass:223  dwarn:1   dfail:0   fail:30  skip:24  time:341s
fi-skl-6700k     total:279  pass:256  dwarn:4   dfail:0   fail:1   skip:18  time:468s
fi-skl-6770hq    total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:476s
fi-skl-gvtdvm    total:279  pass:266  dwarn:0   dfail:0   fail:0   skip:13  time:438s
fi-snb-2520m     total:279  pass:251  dwarn:0   dfail:0   fail:0   skip:28  time:542s
fi-snb-2600      total:279  pass:250  dwarn:0   dfail:0   fail:0   skip:29  time:407s

cd6f0ef4478545aa014d92cabe4d794bfe54fe33 drm-tip: 2017y-06m-22d-16h-48m-46s UTC integration manifest eadb04c drm/i915/dp: Remove -1/+1 from t11_t12 for Gen9_LP/CNP case
87b5f32 drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_5031/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx