Patch "regulator: tps65086: Fix expected switch DT node names" has been added to the 4.9-stable tree

This is a note to let you know that I've just added the patch titled

regulator: tps65086: Fix expected switch DT node names

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
regulator-tps65086-fix-expected-switch-dt-node-names.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: "Andrew F. Davis" <[email protected]>
Date: Fri, 10 Feb 2017 11:55:46 -0600
Subject: regulator: tps65086: Fix expected switch DT node names

From: Andrew F. Davis <[email protected]>

commit 1c47f7c316de38c30b481e1886cc6352c9efdcc1 upstream.

The three load switches are called SWA1, SWB1, and SWB2. The node names describing properties for these are expected to be the same, but due to a typo they are not. Fix this here.

---
 drivers/regulator/tps65086-regulator.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -156,8 +156,8 @@ static struct tps65086_regulator regulat
 			   VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
 			   tps65086_ldoa23_ranges, 0, 0),
 	TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
-	TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
-	TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+	TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+	TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
 	TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
 };
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/regulator-tps65086-fix-expected-switch-dt-node-names.patch queue-4.9/regulator-tps65086-fix-dt-node-referencing-in-of_parse_cb.patch