char: ipmi: eliminate misleading print info when being probed via ACPI

From: Hanjun Guo <[email protected]>

When ipmi is probed via ACPI, the boot log shows

[   17.945139] ipmi_si IPI0001:00: probing via device tree
[   17.950369] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[   17.955795] ipmi_si IPI0001:00: [io  0x00e4-0x3fff] regsize 1 spacing 1 irq 0
[   17.962932] ipmi_si: Adding ACPI-specified bt state machine

which "ipmi_si IPI0001:00: probing via device tree" is misleading with a ACPI HID "IPI0001" but probing via DT.

Eliminate this misleading print info by checking of_node is valid or not before calling of_ipmi_probe().

---
 drivers/char/ipmi/ipmi_si_intf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 59ee93e..159950d 100644
@@ -2810,7 +2810,7 @@ static int acpi_ipmi_probe(struct platform_device *dev)
 
 static int ipmi_probe(struct platform_device *dev)
 {
-	if (of_ipmi_probe(dev) == 0)
+	if (dev->dev.of_node && of_ipmi_probe(dev) == 0)
 		return 0;
 
 	return acpi_ipmi_probe(dev);

1.7.12.4