drivers/fsi: Add SBEFIFO and OCC drivers
Subsystems (2)
v2 cover drivers/fsi: Add SBEFIFO and OCC drivers
From: "Edward A. James" <[email protected]>
This series adds two FSI-based device drivers. The OCC driver is dependent on the SBEFIFO driver, as a user of it's in-kernel API. The in-kernel API provided by the OCC driver will be used by a hwmon driver (on the lkml as "Add On-Chip Controller (OCC) hwmon driver").
Changes since v1:
* Split bindings into separate patch and added SBEFIFO device binding
* Fixed #includes
* Fix SBEFIFO race condition between write() and poll_timer().
* Followed Rob's suggestion to just create one platform device for hwmon driver, instead of using the device tree.
* Also check for "command in progress" response from OCC and try a while
Edward A. James (5):
drivers/fsi: Add SBEFIFO FSI client device driver drivers/fsi/sbefifo: Add in-kernel API
drivers/fsi: Add On-Chip Controller (OCC) driver drivers/fsi/occ: Add in-kernel API Documentation/devicetree/bindings: Add FSI device documentation
.../devicetree/bindings/fsi/ibm,p9-occ.txt | 15 + .../devicetree/bindings/fsi/ibm,p9-sbefifo.txt | 20 + drivers/fsi/Kconfig | 17 + drivers/fsi/Makefile | 2 + drivers/fsi/fsi-sbefifo.c | 932 +++++++++++++++++++++ drivers/fsi/occ.c | 803 ++++++++++++++++++ include/linux/fsi-sbefifo.h | 30 + include/linux/occ.h | 41 + 8 files changed, 1860 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt create mode 100644 drivers/fsi/fsi-sbefifo.c create mode 100644 drivers/fsi/occ.c create mode 100644 include/linux/fsi-sbefifo.h create mode 100644 include/linux/occ.h
Signature · 1 line
1.8.3.1
PATCH v2 1/5 drivers/fsi: Add SBEFIFO FSI client device driver
From: "Edward A. James" <eajames-r/[email protected]>
IBM POWER9 processors contain some embedded hardware and software bits collectively referred to as the self boot engine (SBE). One role of the SBE is to act as a proxy that provides access to the registers of the POWER chip from other (embedded) systems.
The POWER9 chip contains a hardware frontend for communicating with the SBE from remote systems called the SBEFIFO. The SBEFIFO logic is contained within an FSI CFAM and as such the driver implements an FSI bus device.
The SBE expects to communicate using a defined wire protocol; however, the driver knows nothing of the protocol and only provides raw access to the fifo device to userspace applications wishing to communicate with the SBE using the wire protocol.
The SBEFIFO consists of two hardware fifos. The upstream fifo is used by the driver to transfer data to the SBE on the POWER chip, from the system hosting the driver. The downstream fifo is used by the driver to transfer data from the SBE on the power chip to the system hosting the driver.
The driver also provides an in-kernel API for SBEFIFO client device drivers. In this way, applications and client drivers all have safe access to the hardware.
--- drivers/fsi/Kconfig | 7 + drivers/fsi/Makefile | 1 + drivers/fsi/fsi-sbefifo.c | 832 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 840 insertions(+) create mode 100644 drivers/fsi/fsi-sbefifo.c
drivers/fsi/Kconfig +7 -0
@@ -33,6 +33,13 @@ config FSI_SCOM ---help--- This option enables an FSI based SCOM device driver. +config FSI_SBEFIFO + tristate "SBEFIFO FSI client device driver" + ---help--- + This option enables an FSI based SBEFIFO device driver. The SBEFIFO is + a pipe-like FSI device for communicating with the self boot engine + (SBE) on POWER processors. + endif endmenu
drivers/fsi/Makefile +1 -0
@@ -3,3 +3,4 @@ obj-$(CONFIG_FSI) += fsi-core.o obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o obj-$(CONFIG_FSI_SCOM) += fsi-scom.o +obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o
drivers/fsi/fsi-sbefifo.c new file +832 -0
832 lines not on this page · raw message
Signature · 6 lines
1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 2/5 drivers/fsi/sbefifo: Add in-kernel API
In reply to Eddie JamesFrom: "Edward A. James" <[email protected]>
Refactor the user interface of the SBEFIFO driver to allow for an in-kernel read/write API. Add exported functions for other drivers to call, and add an include file with those functions. Also parse the device tree for child nodes and create child platform devices accordingly.
--- drivers/fsi/fsi-sbefifo.c | 142 +++++++++++++++++++++++++++++++++++++------- include/linux/fsi-sbefifo.h | 30 ++++++++++ 2 files changed, 151 insertions(+), 21 deletions(-) create mode 100644 include/linux/fsi-sbefifo.h
drivers/fsi/fsi-sbefifo.c +121 -21
@@ -15,12 +15,16 @@#include <linux/errno.h> #include <linux/fs.h> #include <linux/fsi.h> +#include <linux/fsi-sbefifo.h> #include <linux/idr.h> #include <linux/kernel.h> #include <linux/kref.h> #include <linux/list.h> #include <linux/miscdevice.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/slab.h>
@@ -87,6 +91,7 @@ struct sbefifo_client {struct list_head xfrs;struct sbefifo *dev;struct kref kref; +unsigned long f_flags; };static struct list_head sbefifo_fifos;
@@ -514,6 +519,7 @@ static int sbefifo_open(struct inode *inode, struct file *file)return -ENOMEM ; file->private_data = client; + client->f_flags = file->f_flags;return 0 ; }
@@ -538,19 +544,18 @@ static unsigned int sbefifo_poll(struct file *file, poll_table *wait)return mask; } -static ssize_t sbefifo_read (struct file *file,char __user *buf,size_t len, -loff_t *offset) +static ssize_t sbefifo_read_common (struct sbefifo_client *client, +char __user *ubuf,char *kbuf,size_t len) { -struct sbefifo_client *client = file->private_data;struct sbefifo *sbefifo = client->dev;struct sbefifo_xfr *xfr; -ssize_t ret =0 ;size_t n; +ssize_t ret =0 ;if ((len >>2 ) <<2 != len)return -EINVAL ; -if ((file->f_flags &O_NONBLOCK ) && !sbefifo_xfr_rsp_pending (client)) +if ((client->f_flags &O_NONBLOCK ) && !sbefifo_xfr_rsp_pending (client))return -EAGAIN ;sbefifo_get_client (client);
@@ -569,10 +574,13 @@ static ssize_t sbefifo_read(struct file *file, char __user *buf, size_t len, n =min_t (size_t, n, len); -if (copy_to_user (buf,READ_ONCE (client->rbuf.rpos), n)) { -sbefifo_put_client (client); -return -EFAULT ; - } +if (ubuf) { +if (copy_to_user (ubuf,READ_ONCE (client->rbuf.rpos), n)) { +sbefifo_put_client (client); +return -EFAULT ; + } + }else +memcpy (kbuf,READ_ONCE (client->rbuf.rpos), n);if (sbefifo_buf_readnb (&client->rbuf, n)) { xfr =sbefifo_client_next_xfr (client);
@@ -595,10 +603,18 @@ static ssize_t sbefifo_read(struct file *file, char __user *buf, size_t len,return n; } -static ssize_t sbefifo_write (struct file *file,const char __user *buf, -size_t len,loff_t *offset) +static ssize_t sbefifo_read (struct file *file,char __user *buf,size_t len, +loff_t *offset) {struct sbefifo_client *client = file->private_data; + +return sbefifo_read_common (client, buf,NULL , len); +} + +static ssize_t sbefifo_write_common (struct sbefifo_client *client, +const char __user *ubuf,const char *kbuf, +size_t len) +{struct sbefifo *sbefifo = client->dev;struct sbefifo_buf *wbuf = &client->wbuf;struct sbefifo_xfr *xfr;
@@ -616,7 +632,7 @@ static ssize_t sbefifo_write(struct file *file, const char __user *buf,spin_lock_irq (&sbefifo->lock); xfr =sbefifo_next_xfr (sbefifo); -if ((file->f_flags &O_NONBLOCK ) && xfr && n < len) { +if ((client->f_flags &O_NONBLOCK ) && xfr && n < len) {spin_unlock_irq (&sbefifo->lock);return -EAGAIN ; }
@@ -655,18 +671,24 @@ static ssize_t sbefifo_write(struct file *file, const char __user *buf, n =min_t (size_t, n, len); -if (copy_from_user (READ_ONCE (wbuf->wpos), buf, n)) { -set_bit (SBEFIFO_XFR_CANCEL , &xfr->flags); -sbefifo_get (sbefifo); -if (mod_timer (&sbefifo->poll_timer, jiffies)) -sbefifo_put (sbefifo); -sbefifo_put_client (client); -return -EFAULT ; +if (ubuf) { +if (copy_from_user (READ_ONCE (wbuf->wpos), ubuf, n)) { +set_bit (SBEFIFO_XFR_CANCEL , &xfr->flags); +sbefifo_get (sbefifo); +if (mod_timer (&sbefifo->poll_timer, jiffies)) +sbefifo_put (sbefifo); +sbefifo_put_client (client); +return -EFAULT ; + } + + ubuf += n; + }else { +memcpy (READ_ONCE (wbuf->wpos), kbuf, n); + kbuf += n; }sbefifo_buf_wrotenb (wbuf, n); len -= n; - buf += n; ret += n;/* Set this before starting timer to avoid race condition on
@@ -688,6 +710,14 @@ static ssize_t sbefifo_write(struct file *file, const char __user *buf,return ret; } +static ssize_t sbefifo_write (struct file *file,const char __user *buf, +size_t len,loff_t *offset) +{ +struct sbefifo_client *client = file->private_data; + +return sbefifo_write_common (client, buf,NULL , len); +} +static int sbefifo_release (struct inode *inode,struct file *file) {struct sbefifo_client *client = file->private_data;
@@ -707,12 +737,68 @@ static int sbefifo_release(struct inode *inode, struct file *file) .release = sbefifo_release, }; +struct sbefifo_client *sbefifo_drv_open (struct device *dev, +unsigned long flags) +{ +struct sbefifo_client *client =NULL ; +struct sbefifo *sbefifo; +struct fsi_device *fsi_dev =to_fsi_dev (dev); + +list_for_each_entry (sbefifo, &sbefifo_fifos, link) { +if (sbefifo->fsi_dev != fsi_dev) +continue ; + + client =sbefifo_new_client (sbefifo); +if (client) + client->f_flags = flags; + } + +return client; +} +EXPORT_SYMBOL_GPL (sbefifo_drv_open); + +int sbefifo_drv_read (struct sbefifo_client *client,char *buf,size_t len) +{ +return sbefifo_read_common (client,NULL , buf, len); +} +EXPORT_SYMBOL_GPL (sbefifo_drv_read); + +int sbefifo_drv_write (struct sbefifo_client *client,const char *buf, +size_t len) +{ +return sbefifo_write_common (client,NULL , buf, len); +} +EXPORT_SYMBOL_GPL (sbefifo_drv_write); + +void sbefifo_drv_release (struct sbefifo_client *client) +{ +if (!client) +return ; + +sbefifo_put_client (client); +} +EXPORT_SYMBOL_GPL (sbefifo_drv_release); + +static int sbefifo_unregister_child (struct device *dev,void *data) +{ +struct platform_device *child =to_platform_device (dev); + +of_device_unregister (child); +if (dev->of_node) +of_node_clear_flag (dev->of_node,OF_POPULATED ); + +return 0 ; +} +static int sbefifo_probe (struct device *dev) {struct fsi_device *fsi_dev =to_fsi_dev (dev);struct sbefifo *sbefifo; +struct device_node *np; +struct platform_device *child; +char child_name[32 ];u32 sts; -int ret; +int ret, child_idx =0 ; sbefifo =kzalloc (sizeof (*sbefifo),GFP_KERNEL );if (!sbefifo)
@@ -759,6 +845,18 @@ static int sbefifo_probe(struct device *dev)list_add (&sbefifo->link, &sbefifo_fifos); +if (dev->of_node) { +/* create platform devs for dts child nodes (occ, etc) */ +for_each_child_of_node (dev->of_node, np) { +snprintf (child_name,sizeof (child_name),"%s-dev%d" , + sbefifo->name, child_idx++); + child =of_platform_device_create (np, child_name, dev); +if (!child) +dev_warn (&sbefifo->fsi_dev->dev, +"failed to create child node dev\n" ); + } + } +return misc_register (&sbefifo->mdev); }
@@ -772,6 +870,8 @@ static int sbefifo_remove(struct device *dev)if (sbefifo->fsi_dev != fsi_dev)continue ; +device_for_each_child (dev,NULL , sbefifo_unregister_child); +misc_deregister (&sbefifo->mdev);list_del (&sbefifo->link);ida_simple_remove (&sbefifo_ida, sbefifo->idx);
include/linux/fsi-sbefifo.h new file +30 -0
@@ -0,0 +1,30 @@ +/* +* SBEFIFO FSI Client device driver +* +* Copyright (C) IBM Corporation 2017 +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef LINUX_FSI_SBEFIFO_H +#define LINUX_FSI_SBEFIFO_H + +struct device ; +struct sbefifo_client ; + +extern struct sbefifo_client *sbefifo_drv_open (struct device *dev, +unsigned long flags); +extern int sbefifo_drv_read (struct sbefifo_client *client,char *buf, +size_t len); +extern int sbefifo_drv_write (struct sbefifo_client *client,const char *buf, +size_t len); +extern void sbefifo_drv_release (struct sbefifo_client *client); + +#endif /* LINUX_FSI_SBEFIFO_H */
Signature · 1 line
1.8.3.1
kbuild test robot
build botRe: [PATCH v2 2/5] drivers/fsi/sbefifo: Add in-kernel API
url: https://github.com/0day-ci/linux/commits/Eddie-James/drivers-fsi-Add-SBEFIFO-and-OCC-drivers/20170707-232144 config: um-allyesconfig (attached as .config) compiler: gcc-6 (Debian 6.2.0-3) 6.2.0…
Hi Edward,
[auto build test ERROR on linus/master]
[also build test ERROR on next-20170712]
[cannot apply to v4.12]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Eddie-James/drivers-fsi-Add-SBEFIFO-and-OCC-drivers/20170707-232144
config: um-allyesconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901 reproduce:
# save the attached .config to linux build tree
make ARCH=um All errors (new ones prefixed by >>):
arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xc9f1): warning: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xc83c): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xcb55): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `pcap_nametoaddr':
(.text+0x1d5e5): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `pcap_nametonetaddr':
(.text+0x1d685): warning: Using 'getnetbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `pcap_nametoproto':
(.text+0x1d8a5): warning: Using 'getprotobyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking arch/um/drivers/built-in.o: In function `pcap_nametoport':
(.text+0x1d6d7): warning: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking drivers/built-in.o: In function `img_ascii_lcd_probe':
drivers/auxdisplay/img-ascii-lcd.c:386: undefined reference to `devm_ioremap_resource'
drivers/built-in.o: In function `sbefifo_probe':
>> drivers/fsi/fsi-sbefifo.c:853: undefined reference to `of_platform_device_create'
collect2: error: ld returned 1 exit status
vim +853 drivers/fsi/fsi-sbefifo.c
792
793 static int sbefifo_probe(struct device *dev)
794 {
795 struct fsi_device *fsi_dev = to_fsi_dev(dev);
796 struct sbefifo *sbefifo;
797 struct device_node *np;
798 struct platform_device *child;
799 char child_name[32];
800 u32 sts;
801 int ret, child_idx = 0;
802
803 sbefifo = kzalloc(sizeof(*sbefifo), GFP_KERNEL);
804 if (!sbefifo)
805 return -ENOMEM;
806
807 sbefifo->fsi_dev = fsi_dev;
808
809 ret = sbefifo_inw(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &sts);
810 if (ret)
811 return ret;
812
813 if (!(sts & SBEFIFO_EMPTY)) {
814 dev_err(&sbefifo->fsi_dev->dev,
815 "Found data in upstream fifo\n");
816 return -EIO;
817 }
818
819 ret = sbefifo_inw(sbefifo, SBEFIFO_DWN | SBEFIFO_STS, &sts);
820 if (ret)
821 return ret;
822
823 if (!(sts & SBEFIFO_EMPTY)) {
824 dev_err(&sbefifo->fsi_dev->dev,
825 "Found data in downstream fifo\n");
826 return -EIO;
827 }
828
829 sbefifo->mdev.minor = MISC_DYNAMIC_MINOR;
830 sbefifo->mdev.fops = &sbefifo_fops;
831 sbefifo->mdev.name = sbefifo->name;
832 sbefifo->mdev.parent = dev;
833 spin_lock_init(&sbefifo->lock);
834 kref_init(&sbefifo->kref);
835
836 sbefifo->idx = ida_simple_get(&sbefifo_ida, 1, INT_MAX, GFP_KERNEL);
837 snprintf(sbefifo->name, sizeof(sbefifo->name), "sbefifo%d",
838 sbefifo->idx);
839 init_waitqueue_head(&sbefifo->wait);
840 INIT_LIST_HEAD(&sbefifo->xfrs);
841
842 /* This bit of silicon doesn't offer any interrupts... */
843 setup_timer(&sbefifo->poll_timer, sbefifo_poll_timer,
844 (unsigned long)sbefifo);
845
846 list_add(&sbefifo->link, &sbefifo_fifos);
847
848 if (dev->of_node) {
849 /* create platform devs for dts child nodes (occ, etc) */
850 for_each_child_of_node(dev->of_node, np) {
851 snprintf(child_name, sizeof(child_name), "%s-dev%d",
852 sbefifo->name, child_idx++);
> 853 child = of_platform_device_create(np, child_name, dev);
854 if (!child)
855 dev_warn(&sbefifo->fsi_dev->dev,
856 "failed to create child node dev\n");
857 }
858 }
859
860 return misc_register(&sbefifo->mdev);
861 }
862
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
PATCH v2 3/5 drivers/fsi: Add On-Chip Controller (OCC) driver
In reply to Eddie JamesFrom: "Edward A. James" <[email protected]>
The OCC is a device embedded on a POWER processor that collects and aggregates sensor data from the processor and system. The OCC can provide the raw sensor data as well as perform thermal and power management on the system.
This driver provides an atomic communications channel between a service processor (e.g. a BMC) and the OCC. The driver is dependent on the FSI SBEFIFO driver to get hardware access through the SBE to the OCC SRAM. Commands are issued to the SBE to send or fetch data to the SRAM.
The format of communications to the OCC is writing a command to SRAM, followed by a sending a "doorbell" or attention to the OCC, followed by reading the response from OCC. All of this takes place atomically so that multiple users don't collide in the SRAM.
--- drivers/fsi/Kconfig | 10 + drivers/fsi/Makefile | 1 + drivers/fsi/occ.c | 712 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 723 insertions(+) create mode 100644 drivers/fsi/occ.c
drivers/fsi/Kconfig +10 -0
@@ -40,6 +40,16 @@ config FSI_SBEFIFO a pipe-like FSI device for communicating with the self boot engine (SBE) on POWER processors. +config OCCFIFO + tristate "OCC SBEFIFO client device driver" + depends on FSI_SBEFIFO + ---help--- + This option enables an SBEFIFO based On-Chip Controller (OCC) device + driver. The OCC is a device embedded on a POWER processor that collects + and aggregates sensor data from the processor and system. The OCC can + provide the raw sensor data as well as perform thermal and power + management on the system. + endif endmenu
drivers/fsi/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o obj-$(CONFIG_FSI_SCOM) += fsi-scom.o obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o +obj-$(CONFIG_OCCFIFO) += occ.o
drivers/fsi/occ.c new file +712 -0
712 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v2 4/5 drivers/fsi/occ: Add in-kernel API
In reply to Eddie JamesFrom: "Edward A. James" <[email protected]>
Add an in-kernel read/write API with exported functions. This is necessary for other drivers which want to directly interact with the OCC. Also parse the OCC device tree node for child nodes and create child platform devices accordingly.
--- drivers/fsi/occ.c | 135 +++++++++++++++++++++++++++++++++++++++++++--------- include/linux/occ.h | 41 ++++++++++++++++ 2 files changed, 154 insertions(+), 22 deletions(-) create mode 100644 include/linux/occ.h
drivers/fsi/occ.c +113 -22
@@ -19,6 +19,7 @@#include <linux/miscdevice.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/occ.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/sched.h>
@@ -32,8 +33,6 @@#define OCC_CMD_DATA_BYTES 4090#define OCC_RESP_DATA_BYTES 4089 -#define OCC_RESP_CMD_IN_PRG 0xFF -#define OCC_TIMEOUT_MS 1000#define OCC_CMD_IN_PRG_WAIT_MS 50
@@ -132,33 +131,43 @@ static void occ_enqueue_xfr(struct occ_xfr *xfr)queue_work (occ_wq, &occ->work); } -static int occ_open (struct inode *inode,struct file *file) +static struct occ_client *occ_open_common (struct occ *occ,unsigned long flags) { -struct miscdevice *mdev = file->private_data; -struct occ *occ =to_occ (mdev);struct occ_client *client =kzalloc (sizeof (*client),GFP_KERNEL );if (!client) -return -ENOMEM ; +return NULL ; client->occ = occ;spin_lock_init (&client->lock);init_waitqueue_head (&client->wait); -if (file->f_flags &O_NONBLOCK ) +if (flags &O_NONBLOCK )set_bit (CLIENT_NONBLOCKING , &client->flags); +return client; +} + +static int occ_open (struct inode *inode,struct file *file) +{ +struct occ_client *client; +struct miscdevice *mdev = file->private_data; +struct occ *occ =to_occ (mdev); + + client =occ_open_common (occ, file->f_flags); +if (!client) +return -ENOMEM ; + file->private_data = client;return 0 ; } -static ssize_t occ_read (struct file *file,char __user *buf,size_t len, -loff_t *offset) +static ssize_t occ_read_common (struct occ_client *client,char __user *ubuf, +char *kbuf,size_t len) {int rc;size_t bytes; -struct occ_client *client = file->private_data;struct occ_xfr *xfr = &client->xfr;if (len >OCC_SRAM_BYTES )
@@ -208,10 +217,15 @@ static ssize_t occ_read(struct file *file, char __user *buf, size_t len, goto done; } -if (copy_to_user (buf, &xfr->buf[client->read_offset], bytes)) { - rc = -EFAULT ; - goto done; - } + bytes =min (len, xfr->resp_data_length - client->read_offset); +if (ubuf) { +if (copy_to_user (ubuf, &xfr->buf[client->read_offset], + bytes)) { + rc = -EFAULT ; + goto done; + } + }else +memcpy (kbuf, &xfr->buf[client->read_offset], bytes); client->read_offset += bytes;
@@ -226,13 +240,21 @@ static ssize_t occ_read(struct file *file, char __user *buf, size_t len,return rc; } -static ssize_t occ_write (struct file *file,const char __user *buf, -size_t len,loff_t *offset) +static ssize_t occ_read (struct file *file,char __user *buf,size_t len, +loff_t *offset) +{ +struct occ_client *client = file->private_data; + +return occ_read_common (client, buf,NULL , len); +} + +static ssize_t occ_write_common (struct occ_client *client, +const char __user *ubuf,const char *kbuf, +size_t len) {int rc;unsigned int i;u16 data_length, checksum =0 ; -struct occ_client *client = file->private_data;struct occ_xfr *xfr = &client->xfr;if (len > (OCC_CMD_DATA_BYTES +3 ) || len <3 )
@@ -253,10 +275,13 @@ static ssize_t occ_write(struct file *file, const char __user *buf,* bytes 1-2: data length (msb first) * bytes 3-n: data */ -if (copy_from_user (&xfr->buf[1 ], buf, len)) { - rc = -EFAULT ; - goto done; - } +if (ubuf) { +if (copy_from_user (&xfr->buf[1 ], ubuf, len)) { + rc = -EFAULT ; + goto done; + } + }else +memcpy (&xfr->buf[1 ], kbuf, len); data_length = (xfr->buf[2 ] <<8 ) + xfr->buf[3 ];if (data_length >OCC_CMD_DATA_BYTES ) {
@@ -282,9 +307,16 @@ static ssize_t occ_write(struct file *file, const char __user *buf,return rc; } -static int occ_release (struct inode *inode,struct file *file) +static ssize_t occ_write (struct file *file,const char __user *buf, +size_t len,loff_t *offset) {struct occ_client *client = file->private_data; + +return occ_write_common (client, buf,NULL , len); +} + +static int occ_release_common (struct occ_client *client) +{struct occ_xfr *xfr = &client->xfr;struct occ *occ = client->occ;
@@ -322,6 +354,13 @@ static int occ_release(struct inode *inode, struct file *file)return 0 ; } +static int occ_release (struct inode *inode,struct file *file) +{ +struct occ_client *client = file->private_data; + +return occ_release_common (client); +} +static const struct file_operations occ_fops = { .owner =THIS_MODULE , .open = occ_open,
@@ -611,11 +650,51 @@ static void occ_worker(struct work_struct *work) goto again; } +struct occ_client *occ_drv_open (struct device *dev,unsigned long flags) +{ +struct occ *occ =dev_get_drvdata (dev); + +if (!occ) +return NULL ; + +return occ_open_common (occ, flags); +} +EXPORT_SYMBOL_GPL (occ_drv_open); + +int occ_drv_read (struct occ_client *client,char *buf,size_t len) +{ +return occ_read_common (client,NULL , buf, len); +} +EXPORT_SYMBOL_GPL (occ_drv_read); + +int occ_drv_write (struct occ_client *client,const char *buf,size_t len) +{ +return occ_write_common (client,NULL , buf, len); +} +EXPORT_SYMBOL_GPL (occ_drv_write); + +void occ_drv_release (struct occ_client *client) +{ +occ_release_common (client); +} +EXPORT_SYMBOL_GPL (occ_drv_release); + +static int occ_unregister_child (struct device *dev,void *data) +{ +struct platform_device *child =to_platform_device (dev); + +platform_device_unregister (child); + +return 0 ; +} +static int occ_probe (struct platform_device *pdev) {int rc;u32 reg;struct occ *occ; +struct platform_device *child; +struct platform_device_info child_info;struct device *dev = &pdev->dev; occ =devm_kzalloc (dev,sizeof (*occ),GFP_KERNEL );
@@ -627,8 +706,11 @@ static int occ_probe(struct platform_device *pdev)spin_lock_init (&occ->list_lock);mutex_init (&occ->occ_lock);INIT_WORK (&occ->work, occ_worker); +memset (&child_info,0 ,sizeof (child_info));if (dev->of_node) { + child_info.fwnode = &dev->of_node->fwnode; + rc =of_property_read_u32 (dev->of_node,"reg" , ®);if (!rc) {/* make sure we don't have a duplicate from dts */
@@ -656,6 +738,14 @@ static int occ_probe(struct platform_device *pdev)return rc; } +/* create device for hwmon driver */ + child_info.id = occ->idx; + child_info.parent = dev; + child_info.name ="occ-hwmon" ; + child =platform_device_register_full (&child_info); +if (!child) +dev_warn (dev,"failed to register %s dev\n" , child_info.name); +platform_set_drvdata (pdev, occ);return 0 ;
@@ -667,6 +757,7 @@ static int occ_remove(struct platform_device *pdev)flush_work (&occ->work);misc_deregister (&occ->mdev); +device_for_each_child (&pdev->dev,NULL , occ_unregister_child);ida_simple_remove (&occ_ida, occ->idx);return 0 ;
include/linux/occ.h new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v2 5/5 Documentation/devicetree/bindings: Add FSI device documentation
In reply to Eddie JamesFrom: "Edward A. James" <[email protected]>
Document the bindings for the SBE and OCC devices. SBE devices are located on a CFAM on an FSI bus, and OCC devices are accessed through the SBEFIFO.
--- Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 15 +++++++++++++++ .../devicetree/bindings/fsi/ibm,p9-sbefifo.txt | 20 ++++++++++++++++++++ 2 files changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt
Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file +15 -0
@@ -0,0 +1,15 @@ +Device-tree bindings for FSI-based On-Chip Controller driver +------------------------------------------------------------ + +Required properties: + - compatible = "ibm,p9-occ"; + +Optional properties: + - reg = <processor index>; : Index for the processor this OCC is on. + +Examples: + + occ@1 { + compatible = "ibm,p9-occ"; + reg = <1>; + };
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt new file +20 -0
@@ -0,0 +1,20 @@ +Device-tree bindings for FSI-based SBEFIFO driver +------------------------------------------------- + +Required properties: + - reg = < address size > : FSI CFAM address for the SBE engine + and address space size. + +Optional properties: + - <child nodes> : Devices that are accessible through + the SBEFIFO. + +Examples: + + sbefifo@2400 { + reg = < 0x2400 0x400 >; + + occ@1 { + ... + }; + };
Signature · 1 line
1.8.3.1
Rob Herring
maintainerRe: [PATCH v2 5/5] Documentation/devicetree/bindings: Add FSI device documentation
Quoted 1 line · Eddie James
From: "Edward A. James" <[email protected]>
"dt-bindings: fsi: ..." for the subject.
Quoted 19 lines
Document the bindings for the SBE and OCC devices. SBE devices are located on a CFAM on an FSI bus, and OCC devices are accessed through the SBEFIFO.
Signed-off-by Edward A. James <[email protected]>--- Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 15 +++++++++++++++ .../devicetree/bindings/fsi/ibm,p9-sbefifo.txt | 20 ++++++++++++++++++++ 2 files changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txtDocumentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file +0
-0
Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt line 2
Quoted 2 lines
Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file +2
-0@@ -0,0 +1,15 @@ +Device-tree bindings for FSI-based On-Chip Controller driver +------------------------------------------------------------
Bindings are for h/w, not drivers.
Quoted 19 lines
Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file +13
-0+ +Required properties: + - compatible = "ibm,p9-occ"; + +Optional properties: + - reg = <processor index>; : Index for the processor this OCC is on. + +Examples: + + occ@1 { + compatible = "ibm,p9-occ"; + reg = <1>; + };Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt new file +0
-0
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt line 2
Quoted 2 lines
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt new file +2
-0@@ -0,0 +1,20 @@ +Device-tree bindings for FSI-based SBEFIFO driver +-------------------------------------------------
Bindings are for h/w, not drivers.
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt line 14
Quoted 12 lines
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt new file +12
-0+ +Required properties: + - reg = < address size > : FSI CFAM address for the SBE engine + and address space size. + +Optional properties: + - <child nodes> : Devices that are accessible through + the SBEFIFO. + +Examples: + + sbefifo@2400 {
This should have a compatible.
Quoted 9 lines
Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.txt new file +6
-0+ reg = < 0x2400 0x400 >; + + occ@1 { + ... + }; + };Signature · 1 line
1.8.3.1