Skip to contentSkip to conversation

some fixups for MediaTek cpufreq driver

PATCH Superseded [email protected] 4 participants 9 messages Jul 7, 2017 – Jul 10, 2017

Subsystems (4)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover some fixups for MediaTek cpufreq driver

From: Sean Wang <[email protected]>

Changes since v2:
- correct the typo in the binding document

Changes since v1:
- drop those patches already accepted
- refine the commit messages and Kconfig dependency
- Kconfig menu entry and file name itself are updated with more generic name to drop "MT8173" since this driver actually supports all MediaTek SoCs.
- generate patchset again with git format-patch -C -M --thread=shallow
- fix binding examples by replacing '@' with '-' as the OPP nodes will never have a "reg" property.

Hi,

The purpose of the series is
- (patch 1 to 3) to fix up current Mediatek cpufreq driver can't work with the latest tree since one required CPU clock muxer missing would cause the driver getting the resource fails when driver probe gets called.
- (patch 4) to enable cpufreq feature on MT2701/MT7623 platform.
- (patch 5 to 6) to update the binding document to reflect latest driver logic and add more examples guiding people how to apply for Mediatek cpufreq driver.

Sean Wang (3):
cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC
dt-bindings: cpufreq: move MediaTek cpufreq dt-bindings document to
proper place
dt-bindings: cpufreq: enhance MediaTek cpufreq dt-binding document

 .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt  |  83 -------
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 247 +++++++++++++++++++++
 drivers/cpufreq/Kconfig.arm                        |   8 +-
 drivers/cpufreq/Makefile                           |   2 +-
 .../cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c}    |   2 +
 5 files changed, 254 insertions(+), 88 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
 rename drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} (99%)
Signature · 1 line
2.7.4
#1 lore raw

PATCH v3 1/3 cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC

From: Sean Wang <[email protected]>

MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173"

---
 drivers/cpufreq/Kconfig.arm                         | 8 ++++----
 drivers/cpufreq/Makefile                            | 2 +-
 drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} | 2 ++
 3 files changed, 7 insertions(+), 5 deletions(-)
 rename drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} (99%)
drivers/cpufreq/Kconfig.arm +4 -4
index 74ed7e9..79aece7 100644
@@ -87,14 +87,14 @@ config ARM_KIRKWOOD_CPUFREQ
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
 
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
+	depends on ARM || ARM64 || COMPILE_TEST
 	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
drivers/cpufreq/Makefile +1 -1
index b7e78f0..4956f5d 100644
@@ -58,7 +58,7 @@ obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mtk-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +2 -0
similarity index 99%
rename from drivers/cpufreq/mt8173-cpufreq.c
rename to drivers/cpufreq/mtk-cpufreq.c
index fd1886f..481ec77 100644
@@ -575,6 +575,8 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
 
 /* List of machines supported by this driver */
 static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
Signature · 1 line
2.7.4
Reviewed-by on v3 1/3
#2 lore raw

Re: [PATCH v3 1/3] cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC

Hi Sean,

Quoted 23 lines · sean.wang at mediatek.com

From: Sean Wang <[email protected]>

MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173"

---
 drivers/cpufreq/Kconfig.arm                         | 8 ++++----
 drivers/cpufreq/Makefile                            | 2 +-
 drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} | 2 ++
 3 files changed, 7 insertions(+), 5 deletions(-)
 rename drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} (99%)
drivers/cpufreq/Kconfig.arm +0 -0
index 74ed7e9..79aece7 100644

drivers/cpufreq/Kconfig.arm config ARM_KIRKWOOD_CPUFREQ · line 93

Quoted 10 lines
drivers/cpufreq/Kconfig.arm +3 -3
@@ -87,14 +87,14 @@ config ARM_KIRKWOOD_CPUFREQ
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
 
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
+	depends on ARM || ARM64 || COMPILE_TEST

This statement no longer serves any purpose. The whole Kconfig.arm file depends on ARM || ARM64, so you can drop it. As a matter of fact no other entry in this file has the dependency.

Quoted 13 lines
drivers/cpufreq/Kconfig.arm +1 -1
 	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
drivers/cpufreq/Makefile +0 -0
index b7e78f0..4956f5d 100644

drivers/cpufreq/Makefile obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o · line 61

Quoted 5 lines
drivers/cpufreq/Makefile +1 -1
@@ -58,7 +58,7 @@ obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mtk-cpufreq.o

I would have preferred mediatek-cpufreq. 3-letter abbreviations are likely to collide and cause confusion at some point in time. However it seems I am late to the party, I see that there are already many files named mtk-* or *-mtk.*... So, so be it.

Also the file describing the bindings is named?cpufreq-mediatek.txt, which is inconsistent... But the situation is the same for a few other cpufreq drivers already, so I suppose this is acceptable.

Quoted 11 lines
drivers/cpufreq/Makefile +0 -0
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +0 -0
similarity index 99%
rename from drivers/cpufreq/mt8173-cpufreq.c
rename to drivers/cpufreq/mtk-cpufreq.c
index fd1886f..481ec77 100644

drivers/cpufreq/mtk-cpufreq.c static struct platform_driver mt8173_cpufreq_platdrv = { · line 582

Quoted 8 lines
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +2 -0
@@ -575,6 +575,8 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
 
 /* List of machines supported by this driver */
 static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
Signature · 2 lines
Jean Delvare
SUSE L3 Support
author
#3 lore raw

Re: [PATCH v3 1/3] cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC

Quoted 29 lines · Jean Delvare

Hi Sean,

Quoted 26 lines · sean.wang at mediatek.com

From: Sean Wang <[email protected]>

MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173"

---
 drivers/cpufreq/Kconfig.arm                         | 8 ++++----
 drivers/cpufreq/Makefile                            | 2 +-
 drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} | 2 ++
 3 files changed, 7 insertions(+), 5 deletions(-)
 rename drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} (99%)
drivers/cpufreq/Kconfig.arm +0 -0
index 74ed7e9..79aece7 100644
@@ -87,14 +87,14 @@ config ARM_KIRKWOOD_CPUFREQ
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
 
Quoted 12 lines

drivers/cpufreq/Kconfig.arm config ARM_KIRKWOOD_CPUFREQ · line 93

Quoted 7 lines
drivers/cpufreq/Kconfig.arm +3 -3
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
+	depends on ARM || ARM64 || COMPILE_TEST

This statement no longer serves any purpose. The whole Kconfig.arm file depends on ARM || ARM64, so you can drop it. As a matter of fact no other entry in this file has the dependency.

Okay, the whole line seemed redundant for that's always true. I will drop it in the next version.

Quoted 24 lines
Quoted 13 lines
drivers/cpufreq/Kconfig.arm +1 -1
 	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
drivers/cpufreq/Makefile +0 -0
index b7e78f0..4956f5d 100644

drivers/cpufreq/Makefile obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o · line 61

Quoted 5 lines
drivers/cpufreq/Makefile +1 -1
@@ -58,7 +58,7 @@ obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mtk-cpufreq.o

I would have preferred mediatek-cpufreq. 3-letter abbreviations are likely to collide and cause confusion at some point in time. However it seems I am late to the party, I see that there are already many files named mtk-* or *-mtk.*... So, so be it.

Quoted 4 lines

Also the file describing the bindings is named cpufreq-mediatek.txt, which is inconsistent... But the situation is the same for a few other cpufreq drivers already, so I suppose this is acceptable.

Agreed. I also prefer using whole name with mediatek as the prefix than just abbreviation used. I will update it also in the next version.

As for the file naming for other drivers, i feel it's okay for me changing into mediatek as file prefix, but it still depends on maintainers or original authors if they likes this.

Sean

Quoted 22 lines
Quoted 11 lines
drivers/cpufreq/Makefile +0 -0
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +0 -0
similarity index 99%
rename from drivers/cpufreq/mt8173-cpufreq.c
rename to drivers/cpufreq/mtk-cpufreq.c
index fd1886f..481ec77 100644

drivers/cpufreq/mtk-cpufreq.c static struct platform_driver mt8173_cpufreq_platdrv = { · line 582

Quoted 8 lines
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +2 -0
@@ -575,6 +575,8 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
 
 /* List of machines supported by this driver */
 static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
maintainer
#4 lore raw

Re: [PATCH v3 1/3] cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC

Quoted 75 lines · Sean Wang
Quoted 29 lines · Jean Delvare

Hi Sean,

Quoted 26 lines · sean.wang at mediatek.com

From: Sean Wang <[email protected]>

MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173"

---
  drivers/cpufreq/Kconfig.arm                         | 8 ++++----
  drivers/cpufreq/Makefile                            | 2 +-
  drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} | 2 ++
  3 files changed, 7 insertions(+), 5 deletions(-)

rename drivers/cpufreq/{mt8173-cpufreq.c => mtk-cpufreq.c} (99%)

drivers/cpufreq/Kconfig.arm +0 -0
index 74ed7e9..79aece7 100644
@@ -87,14 +87,14 @@ config ARM_KIRKWOOD_CPUFREQ
  	  This adds the CPUFreq driver for Marvell Kirkwood
  	  SoCs.
 
Quoted 12 lines

drivers/cpufreq/Kconfig.arm config ARM_KIRKWOOD_CPUFREQ · line 93

Quoted 7 lines
drivers/cpufreq/Kconfig.arm +3 -3
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
  	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
+	depends on ARM || ARM64 || COMPILE_TEST

This statement no longer serves any purpose. The whole Kconfig.arm file depends on ARM || ARM64, so you can drop it. As a matter of fact no other entry in this file has the dependency.

Okay, the whole line seemed redundant for that's always true. I will drop it in the next version.

Quoted 24 lines
Quoted 13 lines
drivers/cpufreq/Kconfig.arm +1 -1
  	depends on !CPU_THERMAL || THERMAL
  	select PM_OPP
  	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
  config ARM_OMAP2PLUS_CPUFREQ
  	bool "TI OMAP2+"
drivers/cpufreq/Makefile +0 -0
index b7e78f0..4956f5d 100644

drivers/cpufreq/Makefile obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o · line 61

Quoted 5 lines
drivers/cpufreq/Makefile +1 -1
@@ -58,7 +58,7 @@ obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
  obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
  obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
  obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mtk-cpufreq.o

I would have preferred mediatek-cpufreq. 3-letter abbreviations are likely to collide and cause confusion at some point in time. However it seems I am late to the party, I see that there are already many files named mtk-* or *-mtk.*... So, so be it.

Quoted 4 lines

Also the file describing the bindings is named cpufreq-mediatek.txt, which is inconsistent... But the situation is the same for a few other cpufreq drivers already, so I suppose this is acceptable.

Quoted 8 lines

Agreed. I also prefer using whole name with mediatek as the prefix than just abbreviation used. I will update it also in the next version.

As for the file naming for other drivers, i feel it's okay for me changing into mediatek as file prefix, but it still depends on maintainers or original authors if they likes this.

If you want to clean that up, be my guest. Other low-hanging fruits to clean up would be the config options. Right now we have MEDIATEK, MTK and MT65 in kconfig, which is a mess.

Regards,
Matthias

Quoted 27 lines

Sean

Quoted 22 lines
Quoted 11 lines
drivers/cpufreq/Makefile +0 -0
  obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
  obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
  obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +0 -0
similarity index 99%
rename from drivers/cpufreq/mt8173-cpufreq.c
rename to drivers/cpufreq/mtk-cpufreq.c
index fd1886f..481ec77 100644

drivers/cpufreq/mtk-cpufreq.c static struct platform_driver mt8173_cpufreq_platdrv = { · line 582

Quoted 8 lines
drivers/cpufreq/mtk-cpufreq.c renamed from drivers/cpufreq/mt8173-cpufreq.c +2 -0
@@ -575,6 +575,8 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
 
  /* List of machines supported by this driver */
  static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt7623", },
  	{ .compatible = "mediatek,mt817x", },
  	{ .compatible = "mediatek,mt8173", },
  	{ .compatible = "mediatek,mt8176", },
#5 lore raw

PATCH v3 2/3 dt-bindings: cpufreq: move MediaTek cpufreq dt-bindings document to proper place

In reply to [email protected]

From: Sean Wang <[email protected]>

The old place is Documentation/devicetree/bindings/clock/ that would let people hard to find how to use MediaTek cpufreq driver, so moving it to the appropriate place as other cpufreq drivers done would be better.

---
 .../bindings/{clock/mt8173-cpu-dvfs.txt => cpufreq/cpufreq-mediatek.txt}  | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/devicetree/bindings/{clock/mt8173-cpu-dvfs.txt => cpufreq/cpufreq-mediatek.txt} (100%)
Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt renamed from Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt +0 -0
similarity index 100%
rename from Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
rename to Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
Signature · 1 line
2.7.4
maintainer Acked-by on v3 2/3
#6 lore raw

Re: [PATCH v3 2/3] dt-bindings: cpufreq: move MediaTek cpufreq dt-bindings document to proper place

Quoted 7 lines · sean.wang at mediatek.com

From: Sean Wang <[email protected]>

The old place is Documentation/devicetree/bindings/clock/ that would let people hard to find how to use MediaTek cpufreq driver, so moving it to the appropriate place as other cpufreq drivers done would be better.

Quoted 6 lines
---
 .../bindings/{clock/mt8173-cpu-dvfs.txt => cpufreq/cpufreq-mediatek.txt}  | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/devicetree/bindings/{clock/mt8173-cpu-dvfs.txt => cpufreq/cpufreq-mediatek.txt} (100%)
#7 lore raw

PATCH v3 3/3 dt-bindings: cpufreq: enhance MediaTek cpufreq dt-binding document

In reply to [email protected]

From: Sean Wang <[email protected]>

Update binding document with adding operating-points-v2 as the required property and the cooling level as the optional properties and adding more examples guiding people how to use MediaTek cpufreq driver for MediaTek SoCs.

---
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 170 ++++++++++++++++++++-
 1 file changed, 167 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +167 -3
index 52b457c..f640308 100644
@@ -1,4 +1,5 @@
-Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+Binding for MediaTek's CPUFreq driver
+=====================================
 
 Required properties:
 - clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
@@ -9,6 +10,8 @@ Required properties:
 			  transition and not stable yet.
 	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
 	generic clock consumer properties.
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
+	for detail.
 - proc-supply: Regulator for Vproc of CPU cluster.
 
 Optional properties:
@@ -17,9 +20,166 @@ Optional properties:
 	       Vsram to fit SoC specific needs. When absent, the voltage scaling
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt
+	for detail.
+
+Example 1 (MT7623 SoC):
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpu0: cpu at 0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x0>;
+		clocks = <&infracfg CLK_INFRA_CPUSEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+	cpu at 1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x1>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu at 2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x2>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu at 3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x3>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+
+Example 2 (MT8173 SoC):
+	cpu_opp_table_a: opp_table_a {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+
+		opp-1183000000 {
+			opp-hz = /bits/ 64 <1183000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1083000>;
+		};
+
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+
+		opp-1573000000 {
+			opp-hz = /bits/ 64 <1573000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu_opp_table_b: opp_table_b {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1007000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+
+		opp-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
 
-Example:
---------
 	cpu0: cpu at 0 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a53";
@@ -29,6 +189,7 @@ Example:
 		clocks = <&infracfg CLK_INFRA_CA53SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
 	};
 
 	cpu1: cpu at 1 {
@@ -40,6 +201,7 @@ Example:
 		clocks = <&infracfg CLK_INFRA_CA53SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
 	};
 
 	cpu2: cpu at 100 {
@@ -51,6 +213,7 @@ Example:
 		clocks = <&infracfg CLK_INFRA_CA57SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
 	};
 
 	cpu3: cpu at 101 {
@@ -62,6 +225,7 @@ Example:
 		clocks = <&infracfg CLK_INFRA_CA57SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
 	};
 
 	&cpu0 {
Signature · 1 line
2.7.4
maintainer Acked-by on v3 3/3
#8 lore raw

Re: [PATCH v3 3/3] dt-bindings: cpufreq: enhance MediaTek cpufreq dt-binding document

Quoted 7 lines · sean.wang at mediatek.com

From: Sean Wang <[email protected]>

Update binding document with adding operating-points-v2 as the required property and the cooling level as the optional properties and adding more examples guiding people how to use MediaTek cpufreq driver for MediaTek SoCs.

Quoted 5 lines
---
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 170 ++++++++++++++++++++-
 1 file changed, 167 insertions(+), 3 deletions(-)