Skip to contentSkip to conversation

Patch "xhci: Limit USB2 port wake support for AMD Promontory hosts" has been added to the 4.11-stable tree

PATCH [email protected] 1 participant 1 message Jul 8, 2017

Subsystems (3)
Stable branch USB USB xHCI driver
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

xhci: Limit USB2 port wake support for AMD Promontory hosts

to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
xhci-limit-usb2-port-wake-support-for-amd-promontory-hosts.patch
and it can be found in the queue-4.11 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From dec08194ffeccfa1cf085906b53d301930eae18f Mon Sep 17 00:00:00 2001

From: Jiahau Chang <[email protected]>
Date: Mon, 19 Jun 2017 13:08:30 +0300
Subject: xhci: Limit USB2 port wake support for AMD Promontory hosts

From: Jiahau Chang <[email protected]>

commit dec08194ffeccfa1cf085906b53d301930eae18f upstream.

For AMD Promontory xHCI host, although you can disable USB 2.0 ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS.

This will disable wake on connect, disconnect and overcurrent on AMD Promontory USB2 ports

[checkpatch cleanup and commit message reword -Mathias]
Cc Tsai Nicholas <[email protected]>
Signed-off-by Jiahau Chang <[email protected]>
Signed-off-by Mathias Nyman <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/host/xhci-hub.c |    3 +++
 drivers/usb/host/xhci-pci.c |   12 ++++++++++++
 drivers/usb/host/xhci.h     |    1 +
 3 files changed, 16 insertions(+)
drivers/usb/host/xhci-hub.c +3 -0
@@ -1350,6 +1350,9 @@ int xhci_bus_suspend(struct usb_hcd *hcd
 				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
 				t2 &= ~PORT_WKDISC_E;
 			}
+			if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
+			    (hcd->speed < HCD_USB3))
+				t2 &= ~PORT_WAKE_BITS;
 		} else
 			t2 &= ~PORT_WAKE_BITS;
drivers/usb/host/xhci-pci.c +12 -0
@@ -54,6 +54,11 @@
 #define PCI_DEVICE_ID_INTEL_APL_XHCI			0x5aa8
 #define PCI_DEVICE_ID_INTEL_DNV_XHCI			0x19d0
 
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
+
 static const char hcd_name[] = "xhci_hcd";
 
 static struct hc_driver __read_mostly xhci_pci_hc_driver;

@@ -135,6 +140,13 @@ static void xhci_pci_quirks(struct devic
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
drivers/usb/host/xhci.h +1 -0
@@ -1819,6 +1819,7 @@ struct xhci_hcd {
 /* For controller with a broken Port Disable implementation */
 #define XHCI_BROKEN_PORT_PED	(1 << 25)
 #define XHCI_LIMIT_ENDPOINT_INTERVAL_7	(1 << 26)
+#define XHCI_U2_DISABLE_WAKE	(1 << 27)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;

Patches currently in stable-queue which might be from [email protected] are

queue-4.11/xhci-limit-usb2-port-wake-support-for-amd-promontory-hosts.patch