initramfs-framework: include install module in recipe for installation

From: "Ng, Wei Tee" <[email protected]>

Utilized the existing init-install-efi.sh script to manage the

installation process of images in initramfs-framework model. This script will be executed when "install" option is being chosen in the grub menu and install the image on the target platform. A new install module is being added in the recipe to handle the installation process using initramfs-framework.

[YOCTO #10989]

Signed-off-by Ng, Wei Tee <[email protected]>

---
 .../initramfs-framework/init-install-efi.sh        | 276 +++++++++++++++++++++
 .../initrdscripts/initramfs-framework_1.0.bb       |  13 +-
 2 files changed, 287 insertions(+), 2 deletions(-)
 create mode 100644 meta/recipes-core/initrdscripts/initramfs-framework/init-install-efi.sh

meta/recipes-core/initrdscripts/initramfs-framework/init-install-efi.sh new file +276 -0

new file mode 100644
index 0000000..5ad3a60
@@ -0,0 +1,276 @@
+#!/bin/sh -e
+#
+# Copyright (c) 2012, Intel Corporation.
+# All rights reserved.
+#
+# install.sh [device_name] [rootfs_name]
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+# We need 20 Mb for the boot partition
+boot_size=20
+
+# 5% for swap
+swap_ratio=5
+
+# Get a list of hard drives
+hdnamelist=""
+live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'`
+live_dev_name=${live_dev_name#\/dev/}
+# Only strip the digit identifier if the device is not an mmc
+case $live_dev_name in
+    mmcblk*)
+    ;;
+    nvme*)
+    ;;
+    *)
+        live_dev_name=${live_dev_name%%[0-9]*}
+    ;;
+esac
+
+echo "Searching for hard drives ..."
+
+# Some eMMC devices have special sub devices such as mmcblk0boot0 etc
+# we're currently only interested in the root device so pick them wisely
+devices=`ls /sys/block/ | grep -v mmcblk` || true
+mmc_devices=`ls /sys/block/ | grep "mmcblk[0-9]\{1,\}$"` || true
+devices="$devices $mmc_devices"
+
+for device in $devices; do
+    case $device in
+        loop*)
+            # skip loop device
+            ;;
+        sr*)
+            # skip CDROM device
+            ;;
+        ram*)
+            # skip ram device
+            ;;
+        *)
+            # skip the device LiveOS is on
+            # Add valid hard drive name to the list
+            case $device in
+                $live_dev_name*)
+                # skip the device we are running from
+                ;;
+                *)
+                    hdnamelist="$hdnamelist $device"
+                ;;
+            esac
+            ;;
+    esac
+done
+
+if [ -z "${hdnamelist}" ]; then
+    echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted."
+    exit 1
+fi
+
+TARGET_DEVICE_NAME=""
+for hdname in $hdnamelist; do
+    # Display found hard drives and their basic info
+    echo "-------------------------------"
+    echo /dev/$hdname
+    if [ -r /sys/block/$hdname/device/vendor ]; then
+        echo -n "VENDOR="
+        cat /sys/block/$hdname/device/vendor
+    fi
+    if [ -r /sys/block/$hdname/device/model ]; then
+        echo -n "MODEL="
+        cat /sys/block/$hdname/device/model
+    fi
+    if [ -r /sys/block/$hdname/device/uevent ]; then
+        echo -n "UEVENT="
+        cat /sys/block/$hdname/device/uevent
+    fi
+    echo
+done
+
+# Get user choice
+while true; do
+    echo "Please select an install target or press n to exit ($hdnamelist ): "
+    read answer
+    if [ "$answer" = "n" ]; then
+        echo "Installation manually aborted."
+        exit 1
+    fi
+    for hdname in $hdnamelist; do
+        if [ "$answer" = "$hdname" ]; then
+            TARGET_DEVICE_NAME=$answer
+            break
+        fi
+    done
+    if [ -n "$TARGET_DEVICE_NAME" ]; then
+        break
+    fi
+done
+
+if [ -n "$TARGET_DEVICE_NAME" ]; then
+    echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
+else
+    echo "No hard drive selected. Installation aborted."
+    exit 1
+fi
+
+device=/dev/$TARGET_DEVICE_NAME
+
+#
+# The udev automounter can cause pain here, kill it
+#
+rm -f /etc/udev/rules.d/automount.rules
+rm -f /etc/udev/scripts/mount*
+
+#
+# Unmount anything the automounter had mounted
+#
+umount ${device}* 2> /dev/null || /bin/true
+
+mkdir -p /tmp
+
+# Create /etc/mtab if not present
+if [ ! -e /etc/mtab ] && [ -e /proc/mounts ]; then
+    ln -sf /proc/mounts /etc/mtab
+fi
+
+disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//")
+
+swap_size=$((disk_size*swap_ratio/100))
+rootfs_size=$((disk_size-boot_size-swap_size))
+
+rootfs_start=$((boot_size))
+rootfs_end=$((rootfs_start+rootfs_size))
+swap_start=$((rootfs_end))
+
+# MMC devices are special in a couple of ways
+# 1) they use a partition prefix character 'p'
+# 2) they are detected asynchronously (need rootwait)
+rootwait=""
+part_prefix=""
+if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \
+   [ ! "${device#/dev/nvme}" = "${device}" ]; then
+    part_prefix="p"
+    rootwait="rootwait"
+fi
+
+# USB devices also require rootwait
+if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
+    rootwait="rootwait"
+fi
+
+bootfs=${device}${part_prefix}1
+rootfs=${device}${part_prefix}2
+swap=${device}${part_prefix}3
+
+echo "*****************"
+echo "Boot partition size:   $boot_size MB ($bootfs)"
+echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
+echo "Swap partition size:   $swap_size MB ($swap)"
+echo "*****************"
+echo "Deleting partition table on ${device} ..."
+dd if=/dev/zero of=${device} bs=512 count=35
+
+echo "Creating new partition table on ${device} ..."
+parted ${device} mklabel gpt
+
+echo "Creating boot partition on $bootfs"
+parted ${device} mkpart boot fat32 0% $boot_size
+parted ${device} set 1 boot on
+
+echo "Creating rootfs partition on $rootfs"
+parted ${device} mkpart root ext3 $rootfs_start $rootfs_end
+
+echo "Creating swap partition on $swap"
+parted ${device} mkpart swap linux-swap $swap_start 100%
+
+parted ${device} print
+
+echo "Formatting $bootfs to vfat..."
+mkfs.vfat $bootfs
+
+echo "Formatting $rootfs to ext3..."
+mkfs.ext3 $rootfs
+
+echo "Formatting swap partition...($swap)"
+mkswap $swap
+
+mkdir /tgt_root
+mkdir /src_root
+mkdir -p /boot
+
+# Handling of the target root partition
+mount $rootfs /tgt_root
+mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root
+echo "Copying rootfs files..."
+cp -a /src_root/* /tgt_root
+if [ -d /tgt_root/etc/ ] ; then
+    boot_uuid=$(blkid -o value -s UUID ${bootfs})
+    swap_part_uuid=$(blkid -o value -s PARTUUID ${swap})
+    echo "/dev/disk/by-partuuid/$swap_part_uuid                swap             swap       defaults              0  0" >> /tgt_root/etc/fstab
+    echo "UUID=$boot_uuid              /boot            vfat       defaults              1  2" >> /tgt_root/etc/fstab
+    # We dont want udev to mount our root device while we're booting...
+    if [ -d /tgt_root/etc/udev/ ] ; then
+        echo "${device}" >> /tgt_root/etc/udev/mount.blacklist
+    fi
+fi
+
+umount /src_root
+
+# Handling of the target boot partition
+mount $bootfs /boot
+echo "Preparing boot partition..."
+
+EFIDIR="/boot/EFI/BOOT"
+mkdir -p $EFIDIR
+# Copy the efi loader
+cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
+
+if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
+    root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs})
+    GRUBCFG="$EFIDIR/grub.cfg"
+    cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
+    # Update grub config for the installed image
+    # Delete the install entry
+    sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
+    # Delete the initrd lines
+    sed -i "/initrd /d" $GRUBCFG
+    # Delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
+    # Delete any root= strings
+    sed -i "s/ root=[^ ]*/ /g" $GRUBCFG
+    # Add the root= and other standard boot options
+    sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG
+fi
+
+if [ -d /run/media/$1/loader ]; then
+    rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
+    SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+    # copy config files for systemd-boot
+    cp -dr /run/media/$1/loader /boot
+    # delete the install entry
+    rm -f /boot/loader/entries/install.conf
+    # delete the initrd lines
+    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
+    # delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # delete any root= strings
+    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # add the root= and other standard boot options
+    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
+fi
+
+umount /tgt_root
+
+cp /run/media/$1/vmlinuz /boot
+
+umount /boot
+
+sync
+
+echo "Remove your installation media, and press ENTER"
+
+read enter
+
+echo "Rebooting..."
+reboot -f

meta/recipes-core/initrdscripts/initramfs-framework_1.0.bb +11 -3

index 211e89d..15c376e 100644
@@ -14,7 +14,8 @@ SRC_URI = "file://init \
            file://udev \
            file://e2fs \
            file://debug \
-           file://setup-live"
+           file://setup-live \
+           file://init-install-efi.sh"
 
 S = "${WORKDIR}"
 

@@ -41,6 +42,9 @@ do_install() {
     # debug
     install -m 0755 ${WORKDIR}/debug ${D}/init.d/00-debug
 
+    # install
+    install -m 0755 ${WORKDIR}/init-install-efi.sh ${D}/init.d/install-efi.sh
+
     # Create device nodes expected by some kernels in initramfs
     # before even executing /init.
     install -d ${D}/dev

@@ -53,7 +57,8 @@ PACKAGES = "${PN}-base \
             initramfs-module-e2fs \
             initramfs-module-rootfs \
             initramfs-module-debug \
-            initramfs-module-setup-live"
+            initramfs-module-setup-live \
+            initramfs-module-install"
 
 FILES_${PN}-base = "/init /init.d/99-finish /dev"
 

@@ -88,3 +93,7 @@ FILES_initramfs-module-rootfs = "/init.d/90-rootfs"
 SUMMARY_initramfs-module-debug = "initramfs dynamic debug support"
 RDEPENDS_initramfs-module-debug = "${PN}-base"
 FILES_initramfs-module-debug = "/init.d/00-debug"
+
+SUMMARY_initramfs-module-install = "initramfs support for installation option"
+RDEPENDS_initramfs-module-install = "${PN}-base parted e2fsprogs-mke2fs dosfstools util-linux-blkid"
+FILES_initramfs-module-install = "/init.d/install-efi.sh"
--

2.7.4

--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

From: "Ng, Wei Tee" <[email protected]>

Utilized the existing init-install-efi.sh script to manage the

installation process of images in initramfs-framework model. This script will be executed when "install" option is being chosen in the grub menu and install the image on the target platform. A new install module is being added in the recipe to handle the installation process using initramfs-framework.

[YOCTO #10989]

Signed-off-by Ng, Wei Tee <[email protected]>

---
 .../initramfs-framework/init-install-efi.sh        | 276 +++++++++++++++++++++
 .../initrdscripts/initramfs-framework_1.0.bb       |  13 +-
 2 files changed, 287 insertions(+), 2 deletions(-)  create mode 

100644 meta/recipes-core/initrdscripts/initramfs-framework/init-install-efi.s h

(quoted diff) +0 -0

a/meta/recipes-core/initrdscripts/initramfs-framework/init-install-efi .sh b/meta/recipes-core/initrdscripts/initramfs-framework/init-install-efi .sh
new file mode 100644
index 0000000..5ad3a60

meta/recipes-core/initrdscripts/initramfs-framework/init-install new file +272 -0

+++ -efi.sh

@@ -0,0 +1,276 @@
+#!/bin/sh -e
+#
+# Copyright (c) 2012, Intel Corporation.
+# All rights reserved.
+#
+# install.sh [device_name] [rootfs_name] #
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+# We need 20 Mb for the boot partition
+boot_size=20
+
+# 5% for swap
+swap_ratio=5
+
+# Get a list of hard drives
+hdnamelist=""
+live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'` 
+live_dev_name=${live_dev_name#\/dev/}
+# Only strip the digit identifier if the device is not an mmc case 
+$live_dev_name in
+    mmcblk*)
+    ;;
+    nvme*)
+    ;;
+    *)
+        live_dev_name=${live_dev_name%%[0-9]*}
+    ;;
+esac
+
+echo "Searching for hard drives ..."
+
+# Some eMMC devices have special sub devices such as mmcblk0boot0 etc 
+# we're currently only interested in the root device so pick them 
+wisely devices=`ls /sys/block/ | grep -v mmcblk` || true 
+mmc_devices=`ls /sys/block/ | grep "mmcblk[0-9]\{1,\}$"` || true 
+devices="$devices $mmc_devices"
+
+for device in $devices; do
+    case $device in
+        loop*)
+            # skip loop device
+            ;;
+        sr*)
+            # skip CDROM device
+            ;;
+        ram*)
+            # skip ram device
+            ;;
+        *)
+            # skip the device LiveOS is on
+            # Add valid hard drive name to the list
+            case $device in
+                $live_dev_name*)
+                # skip the device we are running from
+                ;;
+                *)
+                    hdnamelist="$hdnamelist $device"
+                ;;
+            esac
+            ;;
+    esac
+done
+
+if [ -z "${hdnamelist}" ]; then
+    echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted."
+    exit 1
+fi
+
+TARGET_DEVICE_NAME=""
+for hdname in $hdnamelist; do
+    # Display found hard drives and their basic info
+    echo "-------------------------------"
+    echo /dev/$hdname
+    if [ -r /sys/block/$hdname/device/vendor ]; then
+        echo -n "VENDOR="
+        cat /sys/block/$hdname/device/vendor
+    fi
+    if [ -r /sys/block/$hdname/device/model ]; then
+        echo -n "MODEL="
+        cat /sys/block/$hdname/device/model
+    fi
+    if [ -r /sys/block/$hdname/device/uevent ]; then
+        echo -n "UEVENT="
+        cat /sys/block/$hdname/device/uevent
+    fi
+    echo
+done
+
+# Get user choice
+while true; do
+    echo "Please select an install target or press n to exit ($hdnamelist ): "
+    read answer
+    if [ "$answer" = "n" ]; then
+        echo "Installation manually aborted."
+        exit 1
+    fi
+    for hdname in $hdnamelist; do
+        if [ "$answer" = "$hdname" ]; then
+            TARGET_DEVICE_NAME=$answer
+            break
+        fi
+    done
+    if [ -n "$TARGET_DEVICE_NAME" ]; then
+        break
+    fi
+done
+
+if [ -n "$TARGET_DEVICE_NAME" ]; then
+    echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
+else
+    echo "No hard drive selected. Installation aborted."
+    exit 1
+fi
+
+device=/dev/$TARGET_DEVICE_NAME
+
+#
+# The udev automounter can cause pain here, kill it # rm -f 
+/etc/udev/rules.d/automount.rules
+rm -f /etc/udev/scripts/mount*
+
+#
+# Unmount anything the automounter had mounted # umount ${device}* 2> 
+/dev/null || /bin/true
+
+mkdir -p /tmp
+
+# Create /etc/mtab if not present
+if [ ! -e /etc/mtab ] && [ -e /proc/mounts ]; then
+    ln -sf /proc/mounts /etc/mtab
+fi
+
+disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | 
+cut -d" " -f 3 | sed -e "s/MB//")
+
+swap_size=$((disk_size*swap_ratio/100))
+rootfs_size=$((disk_size-boot_size-swap_size))
+
+rootfs_start=$((boot_size))
+rootfs_end=$((rootfs_start+rootfs_size))
+swap_start=$((rootfs_end))
+
+# MMC devices are special in a couple of ways # 1) they use a 
+partition prefix character 'p'
+# 2) they are detected asynchronously (need rootwait) rootwait=""
+part_prefix=""
+if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \
+   [ ! "${device#/dev/nvme}" = "${device}" ]; then
+    part_prefix="p"
+    rootwait="rootwait"
+fi
+
+# USB devices also require rootwait
+if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
+    rootwait="rootwait"
+fi
+
+bootfs=${device}${part_prefix}1
+rootfs=${device}${part_prefix}2
+swap=${device}${part_prefix}3
+
+echo "*****************"
+echo "Boot partition size:   $boot_size MB ($bootfs)"
+echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
+echo "Swap partition size:   $swap_size MB ($swap)"
+echo "*****************"
+echo "Deleting partition table on ${device} ..."
+dd if=/dev/zero of=${device} bs=512 count=35
+
+echo "Creating new partition table on ${device} ..."
+parted ${device} mklabel gpt
+
+echo "Creating boot partition on $bootfs"
+parted ${device} mkpart boot fat32 0% $boot_size parted ${device} set 
+1 boot on
+
+echo "Creating rootfs partition on $rootfs"
+parted ${device} mkpart root ext3 $rootfs_start $rootfs_end
+
+echo "Creating swap partition on $swap"
+parted ${device} mkpart swap linux-swap $swap_start 100%
+
+parted ${device} print
+
+echo "Formatting $bootfs to vfat..."
+mkfs.vfat $bootfs
+
+echo "Formatting $rootfs to ext3..."
+mkfs.ext3 $rootfs
+
+echo "Formatting swap partition...($swap)"
+mkswap $swap
+
+mkdir /tgt_root
+mkdir /src_root
+mkdir -p /boot
+
+# Handling of the target root partition mount $rootfs /tgt_root mount 
+-o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root echo 
+"Copying rootfs files..."
+cp -a /src_root/* /tgt_root
+if [ -d /tgt_root/etc/ ] ; then
+    boot_uuid=$(blkid -o value -s UUID ${bootfs})
+    swap_part_uuid=$(blkid -o value -s PARTUUID ${swap})
+    echo "/dev/disk/by-partuuid/$swap_part_uuid                swap             swap       defaults              0  0" >> /tgt_root/etc/fstab
+    echo "UUID=$boot_uuid              /boot            vfat       defaults              1  2" >> /tgt_root/etc/fstab
+    # We dont want udev to mount our root device while we're booting...
+    if [ -d /tgt_root/etc/udev/ ] ; then
+        echo "${device}" >> /tgt_root/etc/udev/mount.blacklist
+    fi
+fi
+
+umount /src_root
+
+# Handling of the target boot partition mount $bootfs /boot echo 
+"Preparing boot partition..."
+
+EFIDIR="/boot/EFI/BOOT"
+mkdir -p $EFIDIR
+# Copy the efi loader
+cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
+
+if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
+    root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs})
+    GRUBCFG="$EFIDIR/grub.cfg"
+    cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
+    # Update grub config for the installed image
+    # Delete the install entry
+    sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
+    # Delete the initrd lines
+    sed -i "/initrd /d" $GRUBCFG
+    # Delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
+    # Delete any root= strings
+    sed -i "s/ root=[^ ]*/ /g" $GRUBCFG
+    # Add the root= and other standard boot options
+    sed -i "s@linux /vmlinuz *@linux /vmlinuz 
+root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG fi
+
+if [ -d /run/media/$1/loader ]; then
+    rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
+    SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+    # copy config files for systemd-boot
+    cp -dr /run/media/$1/loader /boot
+    # delete the install entry
+    rm -f /boot/loader/entries/install.conf
+    # delete the initrd lines
+    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
+    # delete any LABEL= strings
+    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # delete any root= strings
+    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
+    # add the root= and other standard boot options
+    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait 
+quiet @" $SYSTEMDBOOT_CFGS fi
+
+umount /tgt_root
+
+cp /run/media/$1/vmlinuz /boot
+
+umount /boot
+
+sync
+
+echo "Remove your installation media, and press ENTER"
+
+read enter
+
+echo "Rebooting..."
+reboot -f

(quoted diff) +0 -0

a/meta/recipes-core/initrdscripts/initramfs-framework_1.0.bb b/meta/recipes-core/initrdscripts/initramfs-framework_1.0.bb index 211e89d..15c376e 100644

meta/recipes-core/initrdscripts/initramfs-framework_1.0.bb +12 -3

@@ -14,7 +14,8 @@ SRC_URI = "file://init \
            file://udev \
            file://e2fs \
            file://debug \
-           file://setup-live"
+           file://setup-live \
+           file://init-install-efi.sh"
 
 S = "${WORKDIR}"
 

@@ -41,6 +42,9 @@ do_install() {
     # debug
     install -m 0755 ${WORKDIR}/debug ${D}/init.d/00-debug
 
+    # install
+    install -m 0755 ${WORKDIR}/init-install-efi.sh 
+ ${D}/init.d/install-efi.sh
+
     # Create device nodes expected by some kernels in initramfs
     # before even executing /init.
     install -d ${D}/dev

@@ -53,7 +57,8 @@ PACKAGES = "${PN}-base \
             initramfs-module-e2fs \
             initramfs-module-rootfs \
             initramfs-module-debug \
-            initramfs-module-setup-live"
+            initramfs-module-setup-live \
+            initramfs-module-install"
 
 FILES_${PN}-base = "/init /init.d/99-finish /dev"
 

@@ -88,3 +93,7 @@ FILES_initramfs-module-rootfs = "/init.d/90-rootfs"
 SUMMARY_initramfs-module-debug = "initramfs dynamic debug support"
 RDEPENDS_initramfs-module-debug = "${PN}-base"
 FILES_initramfs-module-debug = "/init.d/00-debug"
+
+SUMMARY_initramfs-module-install = "initramfs support for installation option"
+RDEPENDS_initramfs-module-install = "${PN}-base parted e2fsprogs-mke2fs dosfstools util-linux-blkid"
+FILES_initramfs-module-install = "/init.d/install-efi.sh"
--

2.7.4

--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core

The reason for this patchtest failure is because of this patch have a dependency on another patch which is:
initramfs-framework: module to support boot live image
Here you go for the link of this patch: http://lists.openembedded.org/pipermail/openembedded-core/2017-July/139570.html

Regards,
Wei Tee

-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Thursday, July 13, 2017 2:31 PM
To: Ng, Wei Tee <[email protected]>
Cc: [email protected]
Subject: ✗ patchtest: failure for initramfs-framework: include install module in recipe for installation

== Series Details ==

Series: initramfs-framework: include install module in recipe for installation
Revision: 1
URL : https://patchwork.openembedded.org/series/7726/
State : failure

== Summary ==

Thank you for submitting this patch series to OpenEmbedded Core. This is an automated response. Several tests have been executed on the proposed series by patchtest resulting in the following failures:

* Issue Series does not apply on top of target branch [test_series_merge_on_head]
Suggested fix Rebase your series on top of targeted branch
Targeted branch master (currently at b1c4661742)

If you believe any of these test results are incorrect, please reply to the mailing list ([email protected]) raising your concerns.
Otherwise we would appreciate you correcting the issues and submitting a new version of the patchset if applicable. Please ensure you add/increment the version number when sending the new version (i.e. [PATCH] -> [PATCH v2] -> [PATCH v3] -> ...).

---

Test framework: http://git.yoctoproject.org/cgit/cgit.cgi/patchtest
Test suite:     http://git.yoctoproject.org/cgit/cgit.cgi/patchtest-oe

The reason for this patchtest failure is because of this patch have a dependency on another patch which is:
initramfs-framework: module to support boot live image Here you go
for the link of this patch:
http://lists.openembedded.org/pipermail/openembedded-core/2017-July/13
9570.html

Regards,
Wei Tee

-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Thursday, July 13, 2017 2:31 PM
To: Ng, Wei Tee <[email protected]>
Cc: [email protected]
Subject: ✗ patchtest: failure for initramfs-framework: include install module in recipe for installation

== Series Details ==

Series: initramfs-framework: include install module in recipe for installation
Revision: 1
URL : https://patchwork.openembedded.org/series/7726/
State : failure

== Summary ==

Thank you for submitting this patch series to OpenEmbedded Core. This is an automated response. Several tests have been executed on the proposed series by patchtest resulting in the following failures:

* Issue Series does not apply on top of target branch [test_series_merge_on_head]
Suggested fix Rebase your series on top of targeted branch
Targeted branch master (currently at b1c4661742)

If you believe any of these test results are incorrect, please reply to the mailing list ([email protected]) raising your concerns.
Otherwise we would appreciate you correcting the issues and submitting a new version of the patchset if applicable. Please ensure you add/increment the version number when sending the new version (i.e. [PATCH] -> [PATCH v2] -> [PATCH v3] -> ...).

---

Test framework: http://git.yoctoproject.org/cgit/cgit.cgi/patchtest
Test suite:     http://git.yoctoproject.org/cgit/cgit.cgi/patchtest-oe