Add support for sm6115,4250 and OnePlus Nord N100
Subsystems (11)
v2 cover Add support for sm6115,4250 and OnePlus Nord N100
Changes from v1
---------------
v1: https://lore.kernel.org/all/[email protected]/
- merge dtsi patches in one
- fix ufs binding (allow ice register)
- fix dt schema issues (to the best of my ability)
- add a few necessary bindings (compats)
- some comments on remaining schema issues after commit msg (patch 7 and 9)
Description
-----------
This series adds support for sm6115 (clocks, pinctrl, usb, ufs, sdhc), sm4250 (mostly empty shell on top of sm6115) and finally basic OnePlus Nord N100 (codename billie2), including the above mentiond items plus simple framebuffer.
Please note that this series depends on [1] (driver compat and bindings).
[1] https://lore.kernel.org/linux-devicetree/[email protected]/
Iskren Chernev (9):
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: firmware: document Qualcomm SM6115 SCM
dt-bindings: nvmem: Add SoC compatible for sm6115
dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone
arm64: dts: qcom: sm6115: Add basic soc dtsi
arm64: dts: qcom: sm4250: Add soc dtsi
arm64: dts: qcom: sm4250: Add support for oneplus-billie2
.../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/firmware/qcom,scm.yaml | 1 + .../bindings/nvmem/qcom,qfprom.yaml | 1 + .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 2 + .../devicetree/bindings/ufs/qcom,ufs.yaml | 26 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 +++++ arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 + arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 ++++++++++++++++++ 10 files changed, 1224 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts create mode 100644 arch/arm64/boot/dts/qcom/sm4250.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
Signature · 1 line
2.37.2
PATCH v2 1/9 dt-bindings: ufs: qcom: Add sm6115 binding
Add SM6115 UFS to DT schema.
--- .../devicetree/bindings/ufs/qcom,ufs.yaml | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +26 -0
@@ -28,6 +28,7 @@ properties: - qcom,msm8998-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc
@@ -178,6 +179,31 @@ allOf: minItems: 1 maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: core_clk_ice + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + minItems: 2 + maxItems: 2 + # TODO: define clock bindings for qcom,msm8994-ufshc unevaluatedProperties: false
Signature · 1 line
2.37.2
Re: [PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding
Quoted 31 lines · Iskren Chernev
Add SM6115 UFS to DT schema.
Signed-off-by Iskren Chernev <[email protected]>--- .../devicetree/bindings/ufs/qcom,ufs.yaml | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +9
-0@@ -28,6 +28,7 @@ properties: - qcom,msm8998-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc@@ -178,6 +179,31 @@ allOf: minItems: 1 maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties:
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml allOf: · line 199
Quoted 10 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +10
-0+ clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: core_clk_ice
This still is not naming and order of sdm845.
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml allOf: · line 202
Quoted 3 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +3
-0+ - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk
Best regards,
Krzysztof
Re: [PATCH v2 1/9] dt-bindings: ufs: qcom: Add sm6115 binding
Quoted 36 lines · Krzysztof Kozlowski
Quoted 35 lines · Iskren Chernev
Add SM6115 UFS to DT schema.
Signed-off-by Iskren Chernev <[email protected]>--- .../devicetree/bindings/ufs/qcom,ufs.yaml | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +13
-0@@ -28,6 +28,7 @@ properties: - qcom,msm8998-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc@@ -178,6 +179,31 @@ allOf: minItems: 1 maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names:
Quoted 8 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml allOf: · line 199
Quoted 6 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +6
-0+ items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: core_clk_iceThis still is not naming and order of sdm845.
Yes, this will come in v3. v2 was released before we finished discussing this issue.
Quoted 6 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml allOf: · line 202
Quoted 3 lines
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +3
-0+ - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clkBest regards,
Krzysztof
PATCH v2 2/9 dt-bindings: firmware: document Qualcomm SM6115 SCM
In reply to Iskren ChernevDocument the compatible for Qualcomm SM6115 SCM.
--- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/firmware/qcom,scm.yaml +1 -0
@@ -44,6 +44,7 @@ properties: - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 + - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 - qcom,scm-sm8150
Signature · 1 line
2.37.2
Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM
Quoted 3 lines · Iskren Chernev
Document the compatible for Qualcomm SM6115 SCM.
Signed-off-by Iskren Chernev <[email protected]>
Quoted 17 lines
--- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/firmware/qcom,scm.yaml +1
-1@@ -44,6 +44,7 @@ properties: - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 + - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 - qcom,scm-sm8150 --
Quoted 2 lines
2.37.2
--
Kind Regards,
Caleb
Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM
In reply to Iskren ChernevQuoted 8 lines · Caleb Connolly
Quoted 3 lines · Iskren Chernev
Document the compatible for Qualcomm SM6115 SCM.
Signed-off-by Iskren Chernev <[email protected]>Reviewed-by Caleb Connolly <[email protected]>
Nope, wrong email, please disregard and use
Quoted 4 lines
Quoted 4 lines
---
Documentation/devicetree/bindings/firmware/qcom,scm.yaml| 1 +1 file changed, 1 insertion(+)
Quoted 17 lines
Quoted 7 lines
Documentation/devicetree/bindings/firmware/qcom,scm.yaml +0
-0@@ -44,6 +44,7 @@ properties:- qcom,scm-sdm845
Quoted 9 lines
- qcom,scm-sdx55
- qcom,scm-sdx65
+ - qcom,scm-sm6115
- qcom,scm-sm6125
- qcom,scm-sm6350
- qcom,scm-sm8150
--
2.37.2
--
Kind Regards,
Caleb
Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM
In reply to Iskren ChernevQuoted 3 lines · Iskren Chernev
Document the compatible for Qualcomm SM6115 SCM.
Signed-off-by Iskren Chernev <[email protected]>
There was such patch:
https://lore.kernel.org/all/[email protected]/
Best regards,
Krzysztof
Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM
Quoted 7 lines · Krzysztof Kozlowski
Quoted 3 lines · Iskren Chernev
Document the compatible for Qualcomm SM6115 SCM.
Signed-off-by Iskren Chernev <[email protected]>There was such patch:
https://lore.kernel.org/all/[email protected]/
Yep, but that patch is for .txt schema, and now the schema is .yaml. So if you applied the other patchset and then ran dtbs_check it would still complain, so I added a patch here, in case the other patchset is not updated. I hope such a simple commit won't cause trouble (if you merge one and then try to merge the other).
Quoted 5 lines
Best regards,
Krzysztof
Re: [PATCH v2 2/9] dt-bindings: firmware: document Qualcomm SM6115 SCM
In reply to Iskren ChernevQuoted 3 lines · Iskren Chernev
Document the compatible for Qualcomm SM6115 SCM.
Signed-off-by Iskren Chernev <[email protected]>
Quoted 19 lines
--- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/firmware/qcom,scm.yaml +1
-0@@ -44,6 +44,7 @@ properties: - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 + - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 - qcom,scm-sm8150Signature · 1 line
2.37.2
PATCH v2 3/9 dt-bindings: nvmem: Add SoC compatible for sm6115
In reply to Iskren ChernevDocument SoC compatible for sm6115.
--- Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +1 -0
@@ -26,6 +26,7 @@ properties: - qcom,sc7180-qfprom - qcom,sc7280-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg:
Signature · 1 line
2.37.2
Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115
Quoted 3 lines · Iskren Chernev
Document SoC compatible for sm6115.
Signed-off-by Iskren Chernev <[email protected]>
Quoted 17 lines
--- Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +1
-1@@ -26,6 +26,7 @@ properties: - qcom,sc7180-qfprom - qcom,sc7280-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg: --
Quoted 2 lines
2.37.2
--
Kind Regards,
Caleb
Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115
In reply to Iskren ChernevQuoted 3 lines · Iskren Chernev
Document SoC compatible for sm6115.
Signed-off-by Iskren Chernev <[email protected]>
Best regards,
Krzysztof
Re: [PATCH v2 3/9] dt-bindings: nvmem: Add SoC compatible for sm6115
In reply to Iskren ChernevQuoted 4 lines · Iskren Chernev
Document SoC compatible for sm6115.
Signed-off-by Iskren Chernev <[email protected]>---
Applied thanks,
--srini
Quoted 15 lines
Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +1
-0@@ -26,6 +26,7 @@ properties: - qcom,sc7180-qfprom - qcom,sc7280-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg:
PATCH v2 4/9 dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges
In reply to Iskren ChernevIdeally this and similar common properties will be inherited so you won't need to paste them in every pinctrl binding.
--- .../devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +2 -0
@@ -49,6 +49,8 @@ properties: gpio-ranges: maxItems: 1 + gpio-reserved-ranges: true + wakeup-parent: true #PIN CONFIGURATION NODES
Signature · 1 line
2.37.2
Re: [PATCH v2 4/9] dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges
Quoted 4 lines · Iskren Chernev
Ideally this and similar common properties will be inherited so you won't need to paste them in every pinctrl binding.
Signed-off-by Iskren Chernev <[email protected]>
Quoted 18 lines
--- .../devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +2
-1@@ -49,6 +49,8 @@ properties: gpio-ranges: maxItems: 1 + gpio-reserved-ranges: true + wakeup-parent: true #PIN CONFIGURATION NODES --
Quoted 2 lines
2.37.2
--
Kind Regards,
Caleb
Re: [PATCH v2 4/9] dt-bindings: pinctrl: qcom: sm6115: Add reserved ranges
In reply to Iskren ChernevQuoted 4 lines · Iskren Chernev
Ideally this and similar common properties will be inherited so you won't need to paste them in every pinctrl binding.
Signed-off-by Iskren Chernev <[email protected]>
This patch 4/9 applied to the pinctrl tree.
Yours,
Linus Walleij
PATCH v2 5/9 dt-bindings: arm: cpus: Add kryo240 compatible
In reply to Iskren ChernevKryo240 is found in SM4250, the slower sibling of the SM6115.
--- Documentation/devicetree/bindings/arm/cpus.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/cpus.yaml +1 -0
@@ -174,6 +174,7 @@ properties: - nvidia,tegra194-carmel - qcom,krait - qcom,kryo + - qcom,kryo240 - qcom,kryo250 - qcom,kryo260 - qcom,kryo280
Signature · 1 line
2.37.2
PATCH v2 6/9 dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone
In reply to Iskren Chernevoneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon SM4250 SoC.
Add support for the same in dt-bindings.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +7 -0
@@ -54,6 +54,8 @@ description: | sdm845 sdx55 sdx65 + sm4250 + sm6115 sm6125 sm6350 sm7225
@@ -670,6 +672,11 @@ properties: - xiaomi,polaris - const: qcom,sdm845 + - items: + - enum: + - oneplus,billie2 + - const: qcom,sm4250 + - items: - enum: - sony,pdx201
Signature · 1 line
2.37.2
Re: [PATCH v2 6/9] dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone
Quoted 7 lines · Iskren Chernev
oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon SM4250 SoC.
Add support for the same in dt-bindings.
Signed-off-by Iskren Chernev <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>
Quoted 30 lines
--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/arm/qcom.yaml +7
-1@@ -54,6 +54,8 @@ description: | sdm845 sdx55 sdx65 + sm4250 + sm6115 sm6125 sm6350 sm7225@@ -670,6 +672,11 @@ properties: - xiaomi,polaris - const: qcom,sdm845 + - items: + - enum: + - oneplus,billie2 + - const: qcom,sm4250 + - items: - enum: - sony,pdx201 --
Quoted 2 lines
2.37.2
--
Kind Regards,
Caleb
PATCH v2 7/9 arm64: dts: qcom: sm6115: Add basic soc dtsi
In reply to Iskren ChernevAdd support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS
---
Remaining issues from make dtbs_check:
- qcom,glink-rpm -- this is still in a txt file
- rpm-requests: qcom,glink-channels -- according to txt file, it is allowed property
- pinctrl -- the existing bindings should support both simple (single pin) and multi-block pinctr blocks (this commit contains multi-block only). However it doesn't work. This block needs to be revisited:
#PIN CONFIGURATION NODES patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-sm6115-tlmm-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-sm6115-tlmm-state"
- ufs phy: binding complains about missing #clock and #phy -cells. The outer binding is never used as a clock or a phy (via reference), and I don't think it will be. Also none of the other ufs phy dts files has those props
- usb: according to schema, there should be 4 interrupts, but some have 2 (like sm6115), and some have none. I see no such interrupts on DS. Are they defined elsewhere?
arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++ 1 file changed, 904 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +904 -0
@@ -0,0 +1,904 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev <[email protected]> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6115.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + secure_display_memory: memory@f3c00000 { + reg = <0x0 0xf3c00000 0x0 0x5c00000>; + no-map; + }; + + dump_mem: memory@f9800000 { + reg = <0x0 0xf9800000 0x0 0x800000>; + no-map; + }; + + adsp_mem: memory@fa000000 { + reg = <0x0 0xfa000000 0x0 0x800000>; + no-map; + }; + + qseecom_mem: memory@fa800000 { + reg = <0x0 0xfa800000 0x0 0x1400000>; + no-map; + }; + + user_contig_mem: memory@fbc00000 { + reg = <0x0 0xfbc00000 0x0 0x1000000>; + no-map; + }; + + qseecom_ta_mem: memory@fcc00000 { + reg = <0x0 0xfcc00000 0x0 0x1000000>; + no-map; + }; + + linux_cma_mem: memory@fdc00000 { + reg = <0x0 0xfdc00000 0x0 0x2000000>; + no-map; + }; + + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x500000 0x400000>, + <0x900000 0x400000>, + <0xd00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 121>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc1_state_on: sdc1-on-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x1400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + hsusb_phy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x1613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x1b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x1c40000 0x1100>, + <0x1e00000 0x2000000>, + <0x3e00000 0x100000>, + <0x3f00000 0xa0000>, + <0x1c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x340000 0x20000>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x45f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <8>; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x4804000 0x3000>, <0x4810000 0x8000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x4807000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x4807400 0x098>, + <0x4807600 0x130>, + <0x4807c00 0x16c>; + #phy-cells = <0>; + }; + }; + + usb3: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; + reg = <0xc600000 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global"; + reg = <0xf111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf120000 0x1000>; + clock-frequency = <19200000>; + + frame@f121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf121000 0x1000>, + <0xf122000 0x1000>; + }; + + frame@f123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf123000 0x1000>; + status = "disabled"; + }; + + frame@f124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf124000 0x1000>; + status = "disabled"; + }; + + frame@f125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf125000 0x1000>; + status = "disabled"; + }; + + frame@f126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf126000 0x1000>; + status = "disabled"; + }; + + frame@f127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf127000 0x1000>; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf128000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0xf200000 0x10000>, + <0xf300000 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08>, + <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 0 0xf08>; + clock-frequency = <19200000>; + }; +};
Signature · 1 line
2.37.2
Re: [PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi
Quoted 59 lines · Iskren Chernev
Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFSSigned-off-by Iskren Chernev <[email protected]>---
Remaining issues from makedtbs_check:
- qcom,glink-rpm -- this is still in a txt file
- rpm-requests: qcom,glink-channels -- according to txt file, it is allowed property
- pinctrl -- the existing bindings should support both simple (single pin) and multi-block pinctr blocks (this commit contains multi-block only). However it doesn't work. This block needs to be revisited:#PIN CONFIGURATION NODES patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-sm6115-tlmm-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-sm6115-tlmm-state"- ufs phy: binding complains about missing #clock and #phy -cells. The outer binding is never used as a clock or a phy (via reference), and I don't think it will be. Also none of the other ufs phy dts files has those props
- usb: according to schema, there should be 4 interrupts, but some have 2 (like sm6115), and some have none. I see no such interrupts on DS. Are they defined elsewhere?arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++ 1 file changed, 904 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsiarch/arm64/boot/dts/qcom/sm6115.dtsi new file +14
-0@@ -0,0 +1,904 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev <[email protected]> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6115.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; +
arch/arm64/boot/dts/qcom/sm6115.dtsi line 24
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "xo_board";
Not sure if it's necessary given you pass these to clock controllers explicitly anyway.
Quoted 260 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +260
-0+ }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + secure_display_memory: memory@f3c00000 { + reg = <0x0 0xf3c00000 0x0 0x5c00000>; + no-map; + }; + + dump_mem: memory@f9800000 { + reg = <0x0 0xf9800000 0x0 0x800000>; + no-map; + }; + + adsp_mem: memory@fa000000 { + reg = <0x0 0xfa000000 0x0 0x800000>;
arch/arm64/boot/dts/qcom/sm6115.dtsi line 294
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ no-map; + }; + + qseecom_mem: memory@fa800000 { + reg = <0x0 0xfa800000 0x0 0x1400000>; + no-map; + }; + + user_contig_mem: memory@fbc00000 { + reg = <0x0 0xfbc00000 0x0 0x1000000>;
Pretty sure this and linux_cma_mem don't need to be reserved at a precise location.. I might be wrong, though..
Quoted 82 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +82
-0+ no-map; + }; + + qseecom_ta_mem: memory@fcc00000 { + reg = <0x0 0xfcc00000 0x0 0x1000000>; + no-map; + }; + + linux_cma_mem: memory@fdc00000 { + reg = <0x0 0xfdc00000 0x0 0x2000000>; + no-map; + }; + + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + }; +
arch/arm64/boot/dts/qcom/sm6115.dtsi line 386
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x500000 0x400000>, + <0x900000 0x400000>,
Bad indentation.
Quoted 177 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +177
-0+ <0xd00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 121>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc1_state_on: sdc1-on-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x1400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + hsusb_phy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x1613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x1b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x1c40000 0x1100>, + <0x1e00000 0x2000000>, + <0x3e00000 0x100000>, + <0x3f00000 0xa0000>, + <0x1c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x340000 0x20000>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram";
arch/arm64/boot/dts/qcom/sm6115.dtsi line 573
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ reg = <0x45f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.
Quoted 12 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +12
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <8>;
arch/arm64/boot/dts/qcom/sm6115.dtsi line 595
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.
Quoted 28 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +28
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; +
arch/arm64/boot/dts/qcom/sm6115.dtsi line 633
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", + "jedec,ufs-2.0";
Wouldn't this fit in a single, 100char line?
Quoted 248 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +248
-0+ reg = <0x4804000 0x3000>, <0x4810000 0x8000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x4807000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x4807400 0x098>, + <0x4807600 0x130>, + <0x4807c00 0x16c>; + #phy-cells = <0>; + }; + }; + + usb3: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; + reg = <0xc600000 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global"; + reg = <0xf111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf120000 0x1000>; + clock-frequency = <19200000>; + + frame@f121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf121000 0x1000>, + <0xf122000 0x1000>; + }; + + frame@f123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf123000 0x1000>; + status = "disabled"; + }; + + frame@f124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf124000 0x1000>; + status = "disabled"; + }; + + frame@f125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf125000 0x1000>; + status = "disabled"; + }; + + frame@f126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf126000 0x1000>; + status = "disabled"; + }; + + frame@f127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf127000 0x1000>; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf128000 0x1000>; + status = "disabled"; + }; + };
arch/arm64/boot/dts/qcom/sm6115.dtsi line 891
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +10
-0+ + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0xf200000 0x10000>, + <0xf300000 0x100000>;
Compatible first, reg second.
arch/arm64/boot/dts/qcom/sm6115.dtsi line 902
Quoted 11 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +11
-0+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08>, + <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 0 0xf08>; + clock-frequency = <19200000>;
Remove clock-frequency if the platform boots without it.
Konrad
Quoted 2 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +2
-0+ }; +};
Re: [PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi
Quoted 4 lines · Konrad Dybcio
arch/arm64/boot/dts/qcom/sm6115.dtsi line 294
Quoted 2 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +2
-0+ user_contig_mem: memory@fbc00000 { + reg = <0x0 0xfbc00000 0x0 0x1000000>;Pretty sure this and
linux_cma_memdon't need to be reserved at a precise location.. I might be wrong, though..
In downstream pretty much no reserved memory location have precise location. How do you figure out which one is which?
Quoted 8 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi line 902
Quoted 7 lines
arch/arm64/boot/dts/qcom/sm6115.dtsi new file +7
-0+ timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08>, + <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 0 0xf08>; + clock-frequency = <19200000>;Remove clock-frequency if the platform boots without it.
And if not stick it in DTS?
PATCH v2 8/9 arm64: dts: qcom: sm4250: Add soc dtsi
In reply to Iskren ChernevThe SM4250 is a downclocked version of the SM6115.
--- arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 ++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250.dtsi
arch/arm64/boot/dts/qcom/sm4250.dtsi new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev <[email protected]> + */ + +#include "sm6115.dtsi" + +&CPU0 { + compatible = "qcom,kryo240"; +}; + +&CPU1 { + compatible = "qcom,kryo240"; +}; + +&CPU2 { + compatible = "qcom,kryo240"; +}; + +&CPU3 { + compatible = "qcom,kryo240"; +}; + +&CPU4 { + compatible = "qcom,kryo240"; +}; + +&CPU5 { + compatible = "qcom,kryo240"; +}; + +&CPU6 { + compatible = "qcom,kryo240"; +}; + +&CPU7 { + compatible = "qcom,kryo240"; +};
Signature · 1 line
2.37.2
Re: [PATCH v2 8/9] arm64: dts: qcom: sm4250: Add soc dtsi
Quoted 5 lines · Iskren Chernev
The SM4250 is a downclocked version of the SM6115.
Signed-off-by Iskren Chernev <[email protected]>--- arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 ++++++++++++++++++++++++++++
Best regards,
Krzysztof
PATCH v2 9/9 arm64: dts: qcom: sm4250: Add support for oneplus-billie2
In reply to Iskren ChernevAdd initial support for OnePlus Nord N100, based on SM4250. Currently working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader
---
Remaining issues from make dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way.
arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++ 2 files changed, 244 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +243 -0
243 lines not on this page · raw message
Signature · 1 line
2.37.2
Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2
Quoted 7 lines · Iskren Chernev
Add initial support for OnePlus Nord N100, based on SM4250. Currently working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader
Quoted 5 lines
Signed-off-by Iskren Chernev <[email protected]>---
Remaining issues from makedtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way.
Yes, I sent patches for it, already merged, so please rebase on linux-next.
https://lore.kernel.org/all/[email protected]/
Quoted 53 lines
arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++ 2 files changed, 244 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dtsarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtbarch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +29
-0@@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev <[email protected]> + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "OnePlus Nord N100"; + compatible = "oneplus,billie2", "qcom,sm4250"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; + qcom,board-id = <0x1000b 0x00>; + + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer";
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts line 39
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +10
-0+ reg = <0 0x5c000000 0 (1600 * 720 * 4)>; + width = <720>; + height = <1600>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + clocks { + xo-board {
These should be overridden by label, not full node path.
Quoted 66 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +66
-0+ clock-frequency = <19200000>; + }; + + sleep-clk { + clock-frequency = <32764>; + }; + }; + + reserved-memory { + mtp_mem: memory@cc300000 { + reg = <0x00 0xcc300000 0x00 0xb00000>; + no-map; + }; + + param_mem: memory@cc200000 { + reg = <0x00 0xcc200000 0x00 0x100000>; + no-map; + }; + + bootloader_log_mem: memory@5fff7000 { + reg = <0x00 0x5fff7000 0x00 0x8000>; + no-map; + }; + + ramoops@cbe00000 { + compatible = "ramoops"; + reg = <0x0 0xcbe00000 0x0 0x400000>; + record-size = <0x40000>; + pmsg-size = <0x200000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + }; + }; +}; + +&usb3 { + status = "okay"; +}; + +&hsusb_phy { + vdd-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +};
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts line 115
Quoted 10 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +10
-0+ +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&rpm_requests { + pm6125-regulators {
Please rebase and test with Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
Best regards,
Krzysztof
Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2
Quoted 14 lines · Krzysztof Kozlowski
Quoted 7 lines · Iskren Chernev
Add initial support for OnePlus Nord N100, based on SM4250. Currently working:
- boots
- usb
- buildin flash storage (UFS)
- SD card readerQuoted 5 lines
Signed-off-by Iskren Chernev <[email protected]>---
Remaining issues from makedtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way.
Quoted 3 lines
Yes, I sent patches for it, already merged, so please rebase on linux-next.
Great, thanks!
Quoted 5 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts line 39
Quoted 3 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +3
-0+ + clocks { + xo-board {These should be overridden by label, not full node path.
Will do.
Quoted 5 lines
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts line 115
Quoted 2 lines
+&rpm_requests {
arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file +1
-0+ pm6125-regulators {Please rebase and test with
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
I will, I'm just waiting for Konrad to say what to do about the reserved-memory nodes. For some reason mainline doesn't use alloc-ranges (dynamic) regions. On the other hand all of the dynamic ranges are not used ATM, so I can just drop them?
Quoted 2 lines
Best regards,
Krzysztof
Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2
In reply to Krzysztof KozlowskiQuoted 11 lines · Krzysztof Kozlowski
Quoted 3 lines · Iskren Chernev
Remaining issues from make
dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way.Yes, I sent patches for it, already merged, so please rebase on linux-next.
https://lore.kernel.org/all/[email protected]/
Please rebase and test with
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e indirect) regulators are used, so this doesn't fix it for me.
Re: [PATCH v2 9/9] arm64: dts: qcom: sm4250: Add support for oneplus-billie2
Quoted 10 lines · Iskren Chernev
Quoted 7 lines · Krzysztof Kozlowski
Quoted 3 lines · Iskren Chernev
Remaining issues from make
dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other DTS I checked is written in this way.Yes, I sent patches for it, already merged, so please rebase on linux-next.
Quoted 7 lines
Quoted 4 lines
https://lore.kernel.org/all/[email protected]/
Please rebase and test with
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yamlIt looks like this patch covers SPMI regulators. In most devices RPM/H (i.e indirect) regulators are used, so this doesn't fix it for me.
Indeed, but I got good news! The SMD/RPM was fixed here:
https://lore.kernel.org/all/[email protected]/
Although anyway you Cc old addresses here, so you need to rebase on next and use get_maintainers.pl.
Bjorn,
Can we get the schemas merged?
Best regards,
Krzysztof