wifi: rtl8xxxu: retry firmware download on error
PATCH v2 1/1 wifi: rtl8xxxu: retry firmware download on error
Occasionally there is an EPROTO error during firmware download. This error is converted to EAGAIN in the download function. But nobody tries again and so device probe fails.
Implement download retry to fix this.
This error was observed (and fix tested) on a tbs2910 board [1] with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
---
Cc: Jes Sorensen <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Ping-Ke Shih <[email protected]>
Changes in v2:
- mention related device in formal commit message
- fix loop iterations
- adapt download retry message to common style including function name
- hide firmware write error and retry messages behind debug settings, according to feedback by Ping-Ke Shih
--- drivers/net/wireless/realtek/rtl8xxxu/core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/core.c +12 -5
@@ -860,9 +860,10 @@ rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len)return len; write_error: -dev_info (&udev->dev, -"%s: Failed to write block at addr: %04x size: %04x\n" , - __func__, addr, blocksize); +if (rtl8xxxu_debug &RTL8XXXU_DEBUG_REG_WRITE ) +dev_info (&udev->dev, +"%s: Failed to write block at addr: %04x size: %04x\n" , + __func__, addr, blocksize);return -EAGAIN ; }
@@ -4064,8 +4065,14 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)*/ rtl8xxxu_write16 (priv,REG_TRXFF_BNDY +2 , fops->trxff_boundary); - ret =rtl8xxxu_download_firmware (priv); -dev_dbg (dev,"%s: download_firmware %i\n" , __func__, ret); +for (int retry =5 ; retry >=0 ; retry--) { + ret =rtl8xxxu_download_firmware (priv); +dev_dbg (dev,"%s: download_firmware %i\n" , __func__, ret); +if (ret != -EAGAIN ) +break ; +if (retry) +dev_dbg (dev,"%s: retry firmware download\n" , __func__); + }if (ret) goto exit; ret =rtl8xxxu_start_firmware (priv);
--
2.43.0
Quoted 4 lines · Soeren Moch
Occasionally there is an EPROTO error during firmware download. This error is converted to EAGAIN in the download function. But nobody tries again and so device probe fails.
Quoted 8 lines
Implement download retry to fix this.
This error was observed (and fix tested) on a tbs2910 board [1] with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1]
arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dtsSigned-off-by Soeren Moch <[email protected]>
Quoted 6 lines · Soeren Moch
Occasionally there is an EPROTO error during firmware download. This error is converted to EAGAIN in the download function. But nobody tries again and so device probe fails.
Implement download retry to fix this.
Quoted 7 lines
This error was observed (and fix tested) on a tbs2910 board [1] with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1]
arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dtsSigned-off-by Soeren Moch <[email protected]>Acked-by Ping-Ke Shih <[email protected]>
1 patch(es) applied to rtw-next branch of rtw.git, thanks.
3d3e28feca7a wifi: rtl8xxxu: retry firmware download on error