Skip to contentSkip to conversation

Adding NV12 support for BXT display

PATCH In review Vidya Srinivas 2 participants 11 messages Jul 24, 2017 – Jul 31, 2017

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Adding NV12 support for BXT display

This patch series is adding NV12 support for Broxton display after rebasing on latest drm-intel-nightly. Initial series of the patches can be found here:
https://lists.freedesktop.org/archives/intel-gfx/2015-May/066786.html

Feature has been currently tested with custom linux based test tool IGT test development is under progress. Floating these patches for initial review. These NV12 patches are dependent on Ville's patches mentioned below.

Update from last rev:
Patches were initial reviewed last when floated but currently there was a design change with respect to
- the way fb offset is handled
- the way rotation is handled
Rebase of the current NV12 patch series has been done as per the current changes on drm-intel-nightly.
Review comments from Ville (12th June 2017) have been addressed Review comments from Clinton A Taylor (7th July 2017) have been addressed
Review comments from Clinton A Taylor (10th July 2017) have been addressed. Had missed out tested-by/reviewed-by in the patches. Fixed that error in this series.
Review comments from Ville (11th July 2017) addressed.

Chandra Konduru (6):
drm/i915: Set scaler mode for NV12
drm/i915: Update format_is_yuv() to include NV12 drm/i915: Upscale scaler max scale for NV12 drm/i915: Add NV12 as supported format for primary plane drm/i915: Add NV12 as supported format for sprite plane drm/i915: Add NV12 support to intel_framebuffer_init

Ville Syrjälä (2):
drm/i915: Implement .get_format_info() hook for CCS
SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.

 drivers/gpu/drm/i915/i915_reg.h      |  24 +++
 drivers/gpu/drm/i915/intel_atomic.c  |   8 +-
 drivers/gpu/drm/i915/intel_display.c | 345 ++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_drv.h     |   3 +-
 drivers/gpu/drm/i915/intel_pm.c      |  29 ++-
 drivers/gpu/drm/i915/intel_sprite.c  |  38 +++-
 include/uapi/drm/drm_fourcc.h        |  20 ++
 7 files changed, 428 insertions(+), 39 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/8 drm/i915: Implement .get_format_info() hook for CCS

From: Ville Syrjälä <[email protected]>

SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.

By providing our own format information for the CCS formats, we should be able to make framebuffer_check() do the right thing for the CCS surface as well.

Note that we'll return the same format info for both Y and Yf tiled format as that's what happens with the non-CCS Y vs. Yf as well. If desired, we could potentially return a unique pointer for each pixel_format+tiling+ccs combination, in which case we immediately be able to tell if any of that stuff changed by just comparing the pointers. But that does sound a bit wasteful space wise.

v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)

---
 drivers/gpu/drm/i915/intel_display.c | 43 ++++++++++++++++++++++++++++++++++++
 include/uapi/drm/drm_fourcc.h        | 20 +++++++++++++++++
 2 files changed, 63 insertions(+)
drivers/gpu/drm/i915/intel_display.c +43 -0
index 6c823cc..e922140 100644
@@ -2428,6 +2428,48 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier)
 	}
 }
 
+/*
+ * 1 byte of CCS actually corresponds to 16x8 pixels on the main
+ * surface, and the memory layout for the CCS tile us 64x64 bytes.
+ * But since we're pretending the CCS tile is 128 bytes wide we
+ * adjust hsub/vsub here accordingly to 8x16 so that the
+ * bytes<->x/y conversions come out correct.
+ */
+static const struct drm_format_info ccs_formats[] = {
+	{ .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
+	{ .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
+	{ .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
+	{ .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
+};
+
+static const struct drm_format_info *
+lookup_format_info(const struct drm_format_info formats[],
+		   int num_formats, u32 format)
+{
+	int i;
+
+	for (i = 0; i < num_formats; i++) {
+		if (formats[i].format == format)
+			return &formats[i];
+	}
+
+	return NULL;
+}
+
+static const struct drm_format_info *
+intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
+{
+	switch (cmd->modifier[0]) {
+	case I915_FORMAT_MOD_Y_TILED_CCS:
+	case I915_FORMAT_MOD_Yf_TILED_CCS:
+		return lookup_format_info(ccs_formats,
+					  ARRAY_SIZE(ccs_formats),
+					  cmd->pixel_format);
+	default:
+		return NULL;
+	}
+}
+
 static int
 intel_fill_fb_info(struct drm_i915_private *dev_priv,
 		   struct drm_framebuffer *fb)
@@ -13639,6 +13681,7 @@ static void intel_atomic_state_free(struct drm_atomic_state *state)
 
 static const struct drm_mode_config_funcs intel_mode_funcs = {
 	.fb_create = intel_user_framebuffer_create,
+	.get_format_info = intel_get_format_info,
 	.output_poll_changed = intel_fbdev_output_poll_changed,
 	.atomic_check = intel_atomic_check,
 	.atomic_commit = intel_atomic_commit,
include/uapi/drm/drm_fourcc.h +20 -0
index 7586c46..238658f 100644
@@ -253,6 +253,26 @@
 #define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3)
 
 /*
+ * Intel color control surface (CCS) for render compression
+ *
+ * The framebuffer format must be one of the 8:8:8:8 RGB formats.
+ * The main surface will be plane index 0 and must be Y/Yf-tiled,
+ * the CCS will be plane index 1.
+ *
+ * Each CCS tile matches a 1024x512 pixel area of the main surface.
+ * To match certain aspects of the 3D hardware the CCS is
+ * considered to be made up of normal 128Bx32 Y tiles, Thus
+ * the CCS pitch must be specified in multiples of 128 bytes.
+ *
+ * In reality the CCS tile appears to be a 64Bx64 Y tile, composed
+ * of QWORD (8 bytes) chunks instead of OWORD (16 bytes) chunks.
+ * But that fact is not relevant unless the memory is accessed
+ * directly.
+ */
+#define I915_FORMAT_MOD_Y_TILED_CCS	fourcc_mod_code(INTEL, 4)
+#define I915_FORMAT_MOD_Yf_TILED_CCS	fourcc_mod_code(INTEL, 5)
+
+/*
  * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks
  *
  * Macroblocks are laid in a Z-shape, and each pixel data is following the
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 2/8 SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.

In reply to Vidya Srinivas

From: Ville Syrjälä <[email protected]>

Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume.

Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works.

Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either.

This patch may contain work from at least the following people:
* Vandana Kannan <[email protected]>
* Daniel Vetter <[email protected]>
* Ben Widawsky <[email protected]>

v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes s/return -EINVAL/goto err/ in intel_framebuffer_init() Eliminate a bunch hardcoded numbers in CCS code

Cc Paulo Zanoni <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Ben Widawsky <[email protected]>
Cc Jason Ekstrand <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h      |  23 ++++
 drivers/gpu/drm/i915/intel_display.c | 234 ++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_pm.c      |  29 ++++-
 drivers/gpu/drm/i915/intel_sprite.c  |   5 +
 4 files changed, 273 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +23 -0
index c712d01..cea4f94 100644
@@ -6106,6 +6106,10 @@ enum {
 #define _PLANE_KEYMSK_2_A			0x70298
 #define _PLANE_KEYMAX_1_A			0x701a0
 #define _PLANE_KEYMAX_2_A			0x702a0
+#define _PLANE_AUX_DIST_1_A			0x701c0
+#define _PLANE_AUX_DIST_2_A			0x702c0
+#define _PLANE_AUX_OFFSET_1_A			0x701c4
+#define _PLANE_AUX_OFFSET_2_A			0x702c4
 #define _PLANE_COLOR_CTL_1_A			0x701CC /* GLK+ */
 #define _PLANE_COLOR_CTL_2_A			0x702CC /* GLK+ */
 #define _PLANE_COLOR_CTL_3_A			0x703CC /* GLK+ */
@@ -6212,6 +6216,24 @@ enum {
 #define PLANE_NV12_BUF_CFG(pipe, plane)	\
 	_MMIO_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe))
 
+#define _PLANE_AUX_DIST_1_B		0x711c0
+#define _PLANE_AUX_DIST_2_B		0x712c0
+#define _PLANE_AUX_DIST_1(pipe) \
+			_PIPE(pipe, _PLANE_AUX_DIST_1_A, _PLANE_AUX_DIST_1_B)
+#define _PLANE_AUX_DIST_2(pipe) \
+			_PIPE(pipe, _PLANE_AUX_DIST_2_A, _PLANE_AUX_DIST_2_B)
+#define PLANE_AUX_DIST(pipe, plane)     \
+	_MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe))
+
+#define _PLANE_AUX_OFFSET_1_B		0x711c4
+#define _PLANE_AUX_OFFSET_2_B		0x712c4
+#define _PLANE_AUX_OFFSET_1(pipe)       \
+		_PIPE(pipe, _PLANE_AUX_OFFSET_1_A, _PLANE_AUX_OFFSET_1_B)
+#define _PLANE_AUX_OFFSET_2(pipe)       \
+		_PIPE(pipe, _PLANE_AUX_OFFSET_2_A, _PLANE_AUX_OFFSET_2_B)
+#define PLANE_AUX_OFFSET(pipe, plane)   \
+	_MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe))
+
 #define _PLANE_COLOR_CTL_1_B			0x711CC
 #define _PLANE_COLOR_CTL_2_B			0x712CC
 #define _PLANE_COLOR_CTL_3_B			0x713CC
@@ -6695,6 +6717,7 @@ enum {
 # define CHICKEN3_DGMG_DONE_FIX_DISABLE		(1 << 2)
 
 #define CHICKEN_PAR1_1		_MMIO(0x42080)
+#define  SKL_RC_HASH_OUTSIDE	(1 << 15)
 #define  DPA_MASK_VBLANK_SRD	(1 << 15)
 #define  FORCE_ARB_IDLE_PLANES	(1 << 14)
 #define  SKL_EDP_PSR_FIX_RDWRAP	(1 << 3)
drivers/gpu/drm/i915/intel_display.c +218 -16

362 lines not on this page · raw message

drivers/gpu/drm/i915/intel_pm.c +27 -2
index 48785ef..85ee779 100644
@@ -62,6 +62,20 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
 	I915_WRITE(CHICKEN_PAR1_1,
 		   I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
 
+	/*
+	 * Display WA#0390: skl,bxt,kbl,glk
+	 *
+	 * Must match Sampler, Pixel Back End, and Media
+	 * (0xE194 bit 8, 0x7014 bit 13, 0x4DDC bits 27 and 31).
+	 *
+	 * Including bits outside the page in the hash would
+	 * require 2 (or 4?) MiB alignment of resources. Just
+	 * assume the defaul hashing mode which only uses bits
+	 * within the page.
+	 */
+	I915_WRITE(CHICKEN_PAR1_1,
+		   I915_READ(CHICKEN_PAR1_1) & ~SKL_RC_HASH_OUTSIDE);
+
 	I915_WRITE(GEN8_CONFIG0,
 		   I915_READ(GEN8_CONFIG0) | GEN9_DEFAULT_FIXES);
 
@@ -4071,7 +4085,9 @@ int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
 
 	/* For Non Y-tile return 8-blocks */
 	if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
-	    fb->modifier != I915_FORMAT_MOD_Yf_TILED)
+	    fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
+	    fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
+	    fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
 		return 8;
 
 	/*
@@ -4377,7 +4393,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	}
 
 	y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
-		  fb->modifier == I915_FORMAT_MOD_Yf_TILED;
+		  fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
+		  fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
+		  fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
 	x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
 
 	/* Display WA #1141: kbl,cfl */
@@ -4472,6 +4490,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	res_lines = div_round_up_fixed16(selected_result,
 					 plane_blocks_per_line);
 
+	/* Display WA #1125: skl,bxt,kbl,glk */
+	if (level == 0 &&
+	    (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
+	     fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS))
+		res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
+
+	/* Display WA #1126: skl,bxt,kbl,glk */
 	if (level >= 1 && level <= 7) {
 		if (y_tiled) {
 			res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
drivers/gpu/drm/i915/intel_sprite.c +5 -0
index 8e25694..3d704bd 100644
@@ -238,6 +238,7 @@ void intel_pipe_update_end(struct intel_crtc *crtc)
 	u32 surf_addr = plane_state->main.offset;
 	unsigned int rotation = plane_state->base.rotation;
 	u32 stride = skl_plane_stride(fb, 0, rotation);
+	u32 aux_stride = skl_plane_stride(fb, 1, rotation);
 	int crtc_x = plane_state->base.dst.x1;
 	int crtc_y = plane_state->base.dst.y1;
 	uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
@@ -272,6 +273,10 @@ void intel_pipe_update_end(struct intel_crtc *crtc)
 	I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
 	I915_WRITE_FW(PLANE_STRIDE(pipe, plane_id), stride);
 	I915_WRITE_FW(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
+	I915_WRITE_FW(PLANE_AUX_DIST(pipe, plane_id),
+		      (plane_state->aux.offset - surf_addr) | aux_stride);
+	I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
+		      (plane_state->aux.y << 16) | plane_state->aux.x);
 
 	/* program plane scaler */
 	if (plane_state->scaler_id >= 0) {
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH 3/8 drm/i915: Set scaler mode for NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling

v2: Review comments from Ville addressed
NV12 case to be checked first for setting the scaler

v3: Rebased (me)

v4: Rebased (me)

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

---
 drivers/gpu/drm/i915/i915_reg.h     | 1 +
 drivers/gpu/drm/i915/intel_atomic.c | 8 +++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index cea4f94..d15497f 100644
@@ -6390,6 +6390,7 @@ enum {
 #define PS_SCALER_MODE_MASK (3 << 28)
 #define PS_SCALER_MODE_DYN  (0 << 28)
 #define PS_SCALER_MODE_HQ  (1 << 28)
+#define PS_SCALER_MODE_NV12 (2 << 28)
 #define PS_PLANE_SEL_MASK  (7 << 25)
 #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
 #define PS_FILTER_MASK         (3 << 23)
drivers/gpu/drm/i915/intel_atomic.c +7 -1
index 36d4e63..808f8e6 100644
@@ -325,7 +325,13 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
 		}
 
 		/* set scaler mode */
-		if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
+		if (plane_state && plane_state->base.fb &&
+			plane_state->base.fb->format->format ==
+			DRM_FORMAT_NV12) {
+			DRM_ERROR("NV12 format setting scaler mode\n");
+			scaler_state->scalers[*scaler_id].mode =
+				PS_SCALER_MODE_NV12;
+		} else if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
 			scaler_state->scalers[*scaler_id].mode = 0;
 		} else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
 			/*
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/8 drm/i915: Update format_is_yuv() to include NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to format_is_yuv() function
for sprite planes.

v2:
-Use intel_ prefix for format_is_yuv (Ville)

v3: Rebased (me)

v4: Rebased and addressed review comments from Clinton A Taylor.
"static function in intel_sprite.c is not available to the primary plane functions".
Changed commit message - function modified for sprite planes.

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

---
 drivers/gpu/drm/i915/intel_sprite.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +4 -3
index 3d704bd..a38b4f3 100644
@@ -41,13 +41,14 @@
 #include "i915_drv.h"
 
 static bool
-format_is_yuv(uint32_t format)
+intel_format_is_yuv(uint32_t format)
 {
 	switch (format) {
 	case DRM_FORMAT_YUYV:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
 	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_NV12:
 		return true;
 	default:
 		return false;
@@ -330,7 +331,7 @@ void intel_pipe_update_end(struct intel_crtc *crtc)
 	enum plane_id plane_id = plane->id;
 
 	/* Seems RGB data bypasses the CSC always */
-	if (!format_is_yuv(format))
+	if (!intel_format_is_yuv(format))
 		return;
 
 	/*
@@ -894,7 +895,7 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
 		src_y = src->y1 >> 16;
 		src_h = drm_rect_height(src) >> 16;
 
-		if (format_is_yuv(fb->format->format)) {
+		if (intel_format_is_yuv(fb->format->format)) {
 			src_x &= ~1;
 			src_w &= ~1;
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH 5/8 drm/i915: Upscale scaler max scale for NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

---
 drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
 3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +23 -10
index 2d3069c..390ef5c 100644
@@ -3426,6 +3426,8 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
 	case DRM_FORMAT_VYUY:
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
 	default:
 		MISSING_CASE(pixel_format);
 	}
@@ -4671,7 +4673,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 static int
 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
 {
 	struct intel_crtc_scaler_state *scaler_state =
 		&crtc_state->scaler_state;
@@ -4687,7 +4690,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 	 * the 90/270 degree plane rotation cases (to match the
 	 * GTT mapping), hence no need to account for rotation here.
 	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);
 
 	/*
 	 * Scaling/fitting not supported in IF-ID mode in GEN9+
@@ -4763,7 +4767,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)
 	return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
 		&state->scaler_state.scaler_id,
 		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
+		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay, 0);
 }
 
 /**
@@ -4793,7 +4797,8 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 				drm_rect_width(&plane_state->base.src) >> 16,
 				drm_rect_height(&plane_state->base.src) >> 16,
 				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
 	if (ret || plane_state->scaler_id < 0)
 		return ret;
@@ -4819,6 +4824,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 	case DRM_FORMAT_YVYU:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
 		break;
 	default:
 		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
@@ -12674,11 +12680,12 @@ static int intel_atomic_commit(struct drm_device *dev,
 }
 
 int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+skl_max_scale(struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
 {
 	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
 	if (!intel_crtc || !crtc_state->base.enable)
 		return DRM_PLANE_HELPER_NO_SCALING;
@@ -12700,8 +12707,10 @@ static int intel_atomic_commit(struct drm_device *dev,
 	 *            or
 	 *    cdclk/crtc_clock
 	 */
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * (mult - 1);
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);
 
 	return max_scale;
 }
@@ -12722,7 +12731,11 @@ static int intel_atomic_commit(struct drm_device *dev,
 		/* use scaler when colorkey is not required */
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format->format :
+						0);
 		}
 		can_position = true;
 	}
drivers/gpu/drm/i915/intel_drv.h +2 -1
index 021cc54..6f9c631 100644
@@ -1456,7 +1456,8 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_state *pipe_config);
 
 int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
-int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
+	uint32_t pixel_format);
 
 static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
 {
drivers/gpu/drm/i915/intel_sprite.c +2 -1
index a38b4f3..24f769a 100644
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			can_scale = 1;
 			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
 		} else {
 			can_scale = 0;
 			min_scale = DRM_PLANE_HELPER_NO_SCALING;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

Re: [PATCH 5/8] drm/i915: Upscale scaler max scale for NV12

Quoted 6 lines · On Mon, 24 Jul 2017 09:57:46 +0530 Vidya Srinivas <[email protected]>…

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

Quoted 8 lines

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit

I think the splitting up of the function isn't correct, see below.

Quoted 90 lines

- Indentation errors to be fixed in the series

---
 drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
 3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +14 -7
index 2d3069c..390ef5c 100644
@@ -3426,6 +3426,8 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
 	case DRM_FORMAT_VYUY:
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
 	default:
 		MISSING_CASE(pixel_format);
 	}
@@ -4671,7 +4673,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 static int
 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
 {
 	struct intel_crtc_scaler_state *scaler_state =
 		&crtc_state->scaler_state;
@@ -4687,7 +4690,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 	 * the 90/270 degree plane rotation cases (to match the
 	 * GTT mapping), hence no need to account for rotation here.
 	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);
 
 	/*
 	 * Scaling/fitting not supported in IF-ID mode in GEN9+
@@ -4763,7 +4767,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)
 	return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
 		&state->scaler_state.scaler_id,
 		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
+		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay, 0);
 }
 
 /**
@@ -4793,7 +4797,8 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 				drm_rect_width(&plane_state->base.src) >> 16,
 				drm_rect_height(&plane_state->base.src) >> 16,
 				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
 	if (ret || plane_state->scaler_id < 0)
 		return ret;
@@ -4819,6 +4824,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 	case DRM_FORMAT_YVYU:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
 		break;
 	default:
 		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
@@ -12674,11 +12680,12 @@ static int intel_atomic_commit(struct drm_device *dev,
 }
 
 int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+skl_max_scale(struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
 {
 	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
 	if (!intel_crtc || !crtc_state->base.enable)
 		return DRM_PLANE_HELPER_NO_SCALING;

drivers/gpu/drm/i915/intel_display.c static int intel_atomic_commit(struct drm_device *dev, · line 12711

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +2 -2
@@ -12700,8 +12707,10 @@ static int intel_atomic_commit(struct drm_device *dev,
 	 *            or
 	 *    cdclk/crtc_clock
 	 */
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * (mult - 1);

I don't think the above calculation is right, at least it's not matching what was being done previously.

Originally it did ((1 << 16) * 3) - 1 which is 0x2ffff

Now it does (1 << 16) * (3 - 1) which is 0x20000

Quoted 46 lines
drivers/gpu/drm/i915/intel_display.c +7 -1
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);
 
 	return max_scale;
 }
@@ -12722,7 +12731,11 @@ static int intel_atomic_commit(struct drm_device *dev,
 		/* use scaler when colorkey is not required */
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format->format :
+						0);
 		}
 		can_position = true;
 	}
drivers/gpu/drm/i915/intel_drv.h +2 -1
index 021cc54..6f9c631 100644
@@ -1456,7 +1456,8 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_state *pipe_config);
 
 int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
-int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
+	uint32_t pixel_format);
 
 static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
 {
drivers/gpu/drm/i915/intel_sprite.c +2 -1
index a38b4f3..24f769a 100644
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			can_scale = 1;
 			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
 		} else {
 			can_scale = 0;
 			min_scale = DRM_PLANE_HELPER_NO_SCALING;
Signature · 11 lines
--
Bob Paauwe                  
[email protected]
IOTG / PED Software Organization
Intel Corp.  Folsom, CA
(916) 356-6193    

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH 5/8] drm/i915: Upscale scaler max scale for NV12

Quoted 148 lines

-----Original Message-----
From: Paauwe, Bob J
Sent: Saturday, July 29, 2017 1:55 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH 5/8] drm/i915: Upscale scaler max scale for NV12

Quoted 6 lines · On Mon, 24 Jul 2017 09:57:46 +0530 Vidya Srinivas <[email protected]>…

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

Quoted 8 lines

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit

I think the splitting up of the function isn't correct, see below.

Quoted 9 lines

- Indentation errors to be fixed in the series

---
 drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++----

------

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t

Quoted 10 lines
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
 3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +0 -0
index 2d3069c..390ef5c 100644
@@ -3426,6 +3426,8 @@ static u32 skl_plane_ctl_format(uint32_t

pixel_format)

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t · line 3426

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
 		return PLANE_CTL_FORMAT_YUV422 |

PLANE_CTL_YUV422_UYVY;

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t · line 3428

Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +0 -0
 	case DRM_FORMAT_VYUY:
 		return PLANE_CTL_FORMAT_YUV422 |

PLANE_CTL_YUV422_VYUY;

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -0
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
 	default:
 		MISSING_CASE(pixel_format);
 	}
@@ -4671,7 +4673,8 @@ static void cpt_verify_modeset(struct

drm_device

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
 *dev, int pipe)  static int  skl_update_scaler(struct intel_crtc_state
 *crtc_state, bool force_detach,
 		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
 {
 	struct intel_crtc_scaler_state *scaler_state =
 		&crtc_state->scaler_state;
@@ -4687,7 +4690,8 @@ static void cpt_verify_modeset(struct

drm_device *dev, int pipe)

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct drm_device *dev, int pipe)

Quoted 11 lines
drivers/gpu/drm/i915/intel_display.c +3 -1
 	 * the 90/270 degree plane rotation cases (to match the
 	 * GTT mapping), hence no need to account for rotation here.
 	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);
 
 	/*
 	 * Scaling/fitting not supported in IF-ID mode in GEN9+ @@ -4763,7
+4767,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)
 	return skl_update_scaler(state, !state->base.active,

SKL_CRTC_INDEX,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +0 -1
 		&state->scaler_state.scaler_id,
 		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode-

crtc_vdisplay);

drivers/gpu/drm/i915/intel_display.c +1 -0
+		adjusted_mode->crtc_hdisplay, adjusted_mode-

crtc_vdisplay, 0);
}

/**

drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -4793,7 +4797,8 @@ static int skl_update_scaler_plane(struct

intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct · line 4797

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
 				drm_rect_width(&plane_state->base.src) >>

16,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct · line 4798

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
 				drm_rect_height(&plane_state->base.src) >>

16,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct

Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
 				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
 	if (ret || plane_state->scaler_id < 0)
 		return ret;
@@ -4819,6 +4824,7 @@ static int skl_update_scaler_plane(struct

intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
 	case DRM_FORMAT_YVYU:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
 		break;
 	default:
 		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported

scaling format

Quoted 7 lines

0x%x\n", @@ -12674,11 +12680,12 @@ static int
intel_atomic_commit(struct drm_device *dev, }

int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)

drivers/gpu/drm/i915/intel_display.c +1 -0
+skl_max_scale(struct intel_crtc *intel_crtc,

drivers/gpu/drm/i915/intel_display.c static int intel_atomic_commit(struct drm_device *dev,

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +3 -2
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
 {
 	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
 	if (!intel_crtc || !crtc_state->base.enable)
 		return DRM_PLANE_HELPER_NO_SCALING; @@ -12700,8

+12707,10 @@ static

drivers/gpu/drm/i915/intel_display.c static int intel_atomic_commit(struct drm_device *dev, · line 12711

Quoted 8 lines

int intel_atomic_commit(struct drm_device *dev,

drivers/gpu/drm/i915/intel_display.c +2 -2
 	 *            or
 	 *    cdclk/crtc_clock
 	 */
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * (mult - 1);

I don't think the above calculation is right, at least it's not matching what was being done previously.

Quoted 4 lines

Originally it did ((1 << 16) * 3) - 1 which is 0x2ffff

Now it does (1 << 16) * (3 - 1) which is 0x20000

Thank you so much.
I will fix the error and resubmit the patch.

Regards
Vidya

Quoted 59 lines

drivers/gpu/drm/i915/intel_display.c static int intel_atomic_commit(struct

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +2 -0
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);
 
 	return max_scale;
 }
@@ -12722,7 +12731,11 @@ static int intel_atomic_commit(struct

drm_device *dev,

drivers/gpu/drm/i915/intel_display.c static int intel_atomic_commit(struct drm_device *dev,

Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +0 -1
 		/* use scaler when colorkey is not required */
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc),

crtc_state);

drivers/gpu/drm/i915/intel_drv.h void intel_mode_from_pipe_config(struct

Quoted 15 lines
drivers/gpu/drm/i915/intel_display.c +4 -0
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format-

format :

drivers/gpu/drm/i915/intel_display.c +1 -0
+						0);
 		}
 		can_position = true;
 	}
drivers/gpu/drm/i915/intel_drv.h +0 -0
index 021cc54..6f9c631 100644
@@ -1456,7 +1456,8 @@ void intel_mode_from_pipe_config(struct

drm_display_mode *mode,

Quoted 6 lines
drivers/gpu/drm/i915/intel_drv.h +0 -0
 				 struct intel_crtc_state *pipe_config);
 
 int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state); -int

skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state

*crtc_state,

drivers/gpu/drm/i915/intel_sprite.c static u32 g4x_sprite_ctl(const struct

Quoted 10 lines
drivers/gpu/drm/i915/intel_drv.h +1 -0
+	uint32_t pixel_format);
 
 static inline u32 intel_plane_ggtt_offset(const struct

intel_plane_state *state) { diff --git
a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index a38b4f3..24f769a 100644

drivers/gpu/drm/i915/intel_sprite.c +0 -0
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct

intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/intel_sprite.c static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state, · line 824

Quoted 9 lines
drivers/gpu/drm/i915/intel_sprite.c +2 -1
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			can_scale = 1;
 			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
 		} else {
 			can_scale = 0;
 			min_scale = DRM_PLANE_HELPER_NO_SCALING;
Quoted 7 lines

--
--
Bob Paauwe
[email protected]
IOTG / PED Software Organization
Intel Corp. Folsom, CA
(916) 356-6193

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

PATCH 6/8 drm/i915: Add NV12 as supported format for primary plane

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

---
 drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_display.c +24 -3
index 390ef5c..ed6841f 100644
@@ -82,6 +82,22 @@
 	DRM_FORMAT_VYUY,
 };
 
+static const uint32_t nv12_primary_formats[] = {
+	DRM_FORMAT_C8,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
 /* Cursor formats */
 static const uint32_t intel_cursor_formats[] = {
 	DRM_FORMAT_ARGB8888,
@@ -13016,9 +13032,14 @@ void intel_plane_destroy(struct drm_plane *plane)
 	primary->check_plane = intel_check_primary_plane;
 
 	if (INTEL_GEN(dev_priv) >= 9) {
-		intel_primary_formats = skl_primary_formats;
-		num_formats = ARRAY_SIZE(skl_primary_formats);
-
+		if (IS_BROXTON(dev_priv) &&
+			((pipe == PIPE_A || pipe == PIPE_B))) {
+			intel_primary_formats = nv12_primary_formats;
+			num_formats = ARRAY_SIZE(nv12_primary_formats);
+		} else {
+			intel_primary_formats = skl_primary_formats;
+			num_formats = ARRAY_SIZE(skl_primary_formats);
+		}
 		primary->update_plane = skylake_update_primary_plane;
 		primary->disable_plane = skylake_disable_primary_plane;
 	} else if (INTEL_GEN(dev_priv) >= 4) {
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

PATCH 7/8 drm/i915: Add NV12 as supported format for sprite plane

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for sprite plane.

v2: Rebased (me)

v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats

v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series for SKL.

v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B

---
 drivers/gpu/drm/i915/intel_sprite.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +21 -2
index 24f769a..7d16912 100644
@@ -1074,6 +1074,19 @@ int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 	DRM_FORMAT_VYUY,
 };
 
+static uint32_t nv12_plane_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
 struct intel_plane *
 intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 			  enum pipe pipe, int plane)
@@ -1106,8 +1119,14 @@ struct intel_plane *
 		intel_plane->update_plane = skl_update_plane;
 		intel_plane->disable_plane = skl_disable_plane;
 
-		plane_formats = skl_plane_formats;
-		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		if (IS_BROXTON(dev_priv) &&
+			((pipe == PIPE_A || pipe == PIPE_B) && (plane == 0))) {
+			plane_formats = nv12_plane_formats;
+			num_plane_formats = ARRAY_SIZE(nv12_plane_formats);
+		} else {
+			plane_formats = skl_plane_formats;
+			num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		}
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		intel_plane->can_scale = false;
 		intel_plane->max_downscale = 1;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

PATCH 8/8 drm/i915: Add NV12 support to intel_framebuffer_init

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.

v2:
-Fix an issue in checks added (Chandra Konduru)

v3: rebased (me)

v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init Removed offset checks for NV12 case

v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to SKL and BXT only.

v6: Rebased (me)

v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.

---
 drivers/gpu/drm/i915/intel_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/i915/intel_display.c +8 -0
index ed6841f..c843d91 100644
@@ -13820,6 +13820,14 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 			goto err;
 		}
 		break;
+	case DRM_FORMAT_NV12:
+		if (!IS_BROXTON(dev_priv)) {
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+		      drm_get_format_name(mode_cmd->pixel_format,
+				&format_name));
+			goto err;
+		}
+		break;
 	default:
 		DRM_DEBUG_KMS("unsupported pixel format: %s\n",
 			      drm_get_format_name(mode_cmd->pixel_format, &format_name));
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx