IB/mlx4: Add inline-receive support
Subsystems (2)
PATCH 1/1 IB/mlx4: Add inline-receive support
From: Maor Gottlieb <maorg-VPRAkNaXOzVWk0Htik3J/[email protected]>
When inline-receive is enabled, the HCA may write received data into the receive WQE.
Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE.
The completion report will indicate that the payload was placed to the WQE.
It includes:
1) Return maximum supported size of inline-receive by the hardware in query_device vendor's data part.
2) Enable the feature when requested by the vendor data input.
---
Hi Doug,
This patch is based on commit 4931c6ef04b4 ("net/mlx4_en: Optimized single ring steering") from Dave's net-next
Thanks
--- drivers/infiniband/hw/mlx4/main.c | 7 +++++++ drivers/infiniband/hw/mlx4/mlx4_ib.h | 3 +++ drivers/infiniband/hw/mlx4/qp.c | 32 +++++++++++++++++++++++++------- include/uapi/rdma/mlx4-abi.h | 3 ++- 4 files changed, 37 insertions(+), 8 deletions(-)
drivers/infiniband/hw/mlx4/main.c +7 -0
@@ -563,6 +563,13 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, } } +if (uhw->outlen >= resp.response_length + +sizeof (resp.max_inl_recv_sz)) { + resp.response_length +=sizeof (resp.max_inl_recv_sz); + resp.max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); + } +if (uhw->outlen) { err =ib_copy_to_udata (uhw, &resp, resp.response_length);if (err)
drivers/infiniband/hw/mlx4/mlx4_ib.h +3 -0
@@ -319,6 +319,7 @@ struct mlx4_ib_qp {u8 sq_no_prefetch;u8 state;int mlx_type; +u32 inl_recv_sz;struct list_head gid_list;struct list_head steering_rules;struct mlx4_ib_buf *sqp_proxy_rcv;
@@ -624,6 +625,8 @@ struct mlx4_uverbs_ex_query_device_resp {__u32 comp_mask;__u32 response_length;__u64 hca_core_clock_offset; +__u32 max_inl_recv_sz; +__u32 reserved; };static inline struct mlx4_ib_dev *to_mdev (struct ib_device *ibdev)
drivers/infiniband/hw/mlx4/qp.c +25 -7
@@ -377,7 +377,8 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags) }static int set_rq_size (struct mlx4_ib_dev *dev,struct ib_qp_cap *cap, -int is_user,int has_rq,struct mlx4_ib_qp *qp) +int is_user,int has_rq,struct mlx4_ib_qp *qp, +u32 inl_recv_sz) {/* Sanity check RQ size before proceeding */ if (cap->max_recv_wr > dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE ||
@@ -385,18 +386,24 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,return -EINVAL ;if (!has_rq) { -if (cap->max_recv_wr) +if (cap->max_recv_wr || inl_recv_sz)return -EINVAL ; qp->rq.wqe_cnt = qp->rq.max_gs =0 ; }else { +u32 max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); +u32 wqe_size; +/* HW requires >= 1 RQ entry with >= 1 gather entry */ -if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge)) +if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge || + inl_recv_sz > max_inl_recv_sz))return -EINVAL ; qp->rq.wqe_cnt =roundup_pow_of_two (max (1U , cap->max_recv_wr)); qp->rq.max_gs =roundup_pow_of_two (max (1U , cap->max_recv_sge)); - qp->rq.wqe_shift =ilog2 (qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg )); + wqe_size = qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg ); + qp->rq.wqe_shift =ilog2 (max_t (u32, wqe_size, inl_recv_sz)); }/* leave userspace return values as they were, so as not to break ABI */
@@ -719,9 +726,6 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,if (init_attr->sq_sig_type ==IB_SIGNAL_ALL_WR ) qp->sq_signal_bits =cpu_to_be32 (MLX4_WQE_CTRL_CQ_UPDATE ); - err =set_rq_size (dev, &init_attr->cap, !!pd->uobject,qp_has_rq (init_attr), qp); -if (err) - goto err;if (pd->uobject) {struct mlx4_ib_create_qp ucmd;
@@ -731,6 +735,12 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err; } + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp, ucmd.inl_recv_sz); +if (err) + goto err; + + qp->inl_recv_sz = ucmd.inl_recv_sz; qp->sq_no_prefetch = ucmd.sq_no_prefetch; err =set_user_sq_size (dev, qp, &ucmd);
@@ -760,6 +770,11 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err_mtt; } }else { + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp,0 ); +if (err) + goto err; + qp->sq_no_prefetch =0 ;if (init_attr->create_flags &IB_QP_CREATE_IPOIB_UD_LSO )
@@ -1657,6 +1672,9 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, } } +if (qp->inl_recv_sz) + context->param3 |=cpu_to_be32 (1 <<25 ); +if (ibqp->qp_type ==IB_QPT_GSI || ibqp->qp_type ==IB_QPT_SMI ) context->mtu_msgmax = (IB_MTU_4096 <<5 ) |11 ;else if (ibqp->qp_type ==IB_QPT_RAW_PACKET )
include/uapi/rdma/mlx4-abi.h +2 -1
@@ -101,7 +101,8 @@ struct mlx4_ib_create_qp {__u8 log_sq_bb_count;__u8 log_sq_stride;__u8 sq_no_prefetch; - __u8 reserved[5]; +__u32 inl_recv_sz; + __u8 reserved; };#endif /* MLX4_ABI_USER_H */
--
2.13.1
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170621062628.7416-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Doug Ledford
AppliedQuoted 13 lines · Leon Romanovsky
From: Maor Gottlieb <maorg-VPRAkNaXOzVWk0Htik3J/[email protected]>
When inline-receive is enabled, the HCA may write received data into the receive WQE.
Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE.
The completion report will indicate that the payload was placed to the WQE.
Quoted 8 lines
It includes:
1) Return maximum supported size of inline-receive by the hardware inquery_devicevendor's data part.
2) Enable the feature when requested by the vendor data input.Signed-off-by Leon Romanovsky <[email protected]>
Thanks, applied.
Signature · 8 lines
Doug Ledford <[email protected]> GPG KeyID: B826A3330E572FDD Key fingerprint = AE6B 1BDA 122B 23B4 265B 1274 B826 A333 0E57 2FDD -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 175 lines · Leon Romanovsky
From: Maor Gottlieb <maorg-VPRAkNaXOzVWk0Htik3J/[email protected]>
When inline-receive is enabled, the HCA may write received data into the receive WQE.
Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE.
The completion report will indicate that the payload was placed to the WQE.
It includes:
1) Return maximum supported size of inline-receive by the hardware inquery_devicevendor's data part.
2) Enable the feature when requested by the vendor data input.Signed-off-by Leon Romanovsky <[email protected]>---
Hi Doug,This patch is based on commit
4931c6ef04b4("net/mlx4_en: Optimized single ring steering") from Dave's net-nextThanks
--- drivers/infiniband/hw/mlx4/main.c | 7 +++++++ drivers/infiniband/hw/mlx4/mlx4_ib.h | 3 +++ drivers/infiniband/hw/mlx4/qp.c | 32 +++++++++++++++++++++++++------- include/uapi/rdma/mlx4-abi.h | 3 ++- 4 files changed, 37 insertions(+), 8 deletions(-)drivers/infiniband/hw/mlx4/main.c +7
-0@@ -563,6 +563,13 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, } } +if (uhw->outlen >= resp.response_length + +sizeof (resp.max_inl_recv_sz)) { + resp.response_length +=sizeof (resp.max_inl_recv_sz); + resp.max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); + } +if (uhw->outlen) { err =ib_copy_to_udata (uhw, &resp, resp.response_length);if (err)drivers/infiniband/hw/mlx4/mlx4_ib.h +3
-0@@ -319,6 +319,7 @@ struct mlx4_ib_qp {u8 sq_no_prefetch;u8 state;int mlx_type; +u32 inl_recv_sz;struct list_head gid_list;struct list_head steering_rules;struct mlx4_ib_buf *sqp_proxy_rcv;@@ -624,6 +625,8 @@ struct mlx4_uverbs_ex_query_device_resp {__u32 comp_mask;__u32 response_length;__u64 hca_core_clock_offset; +__u32 max_inl_recv_sz; +__u32 reserved; };static inline struct mlx4_ib_dev *to_mdev (struct ib_device *ibdev)drivers/infiniband/hw/mlx4/qp.c +25
-7@@ -377,7 +377,8 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags) }static int set_rq_size (struct mlx4_ib_dev *dev,struct ib_qp_cap *cap, -int is_user,int has_rq,struct mlx4_ib_qp *qp) +int is_user,int has_rq,struct mlx4_ib_qp *qp, +u32 inl_recv_sz) {/* Sanity check RQ size before proceeding */ if (cap->max_recv_wr > dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE ||@@ -385,18 +386,24 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,return -EINVAL ;if (!has_rq) { -if (cap->max_recv_wr) +if (cap->max_recv_wr || inl_recv_sz)return -EINVAL ; qp->rq.wqe_cnt = qp->rq.max_gs =0 ; }else { +u32 max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); +u32 wqe_size; +/* HW requires >= 1 RQ entry with >= 1 gather entry */ -if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge)) +if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge || + inl_recv_sz > max_inl_recv_sz))return -EINVAL ; qp->rq.wqe_cnt =roundup_pow_of_two (max (1U , cap->max_recv_wr)); qp->rq.max_gs =roundup_pow_of_two (max (1U , cap->max_recv_sge)); - qp->rq.wqe_shift =ilog2 (qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg )); + wqe_size = qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg ); + qp->rq.wqe_shift =ilog2 (max_t (u32, wqe_size, inl_recv_sz)); }/* leave userspace return values as they were, so as not to break ABI */ @@ -719,9 +726,6 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,if (init_attr->sq_sig_type ==IB_SIGNAL_ALL_WR ) qp->sq_signal_bits =cpu_to_be32 (MLX4_WQE_CTRL_CQ_UPDATE ); - err =set_rq_size (dev, &init_attr->cap, !!pd->uobject,qp_has_rq (init_attr), qp); -if (err) - goto err;if (pd->uobject) {struct mlx4_ib_create_qp ucmd;@@ -731,6 +735,12 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err; } + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp, ucmd.inl_recv_sz); +if (err) + goto err; + + qp->inl_recv_sz = ucmd.inl_recv_sz; qp->sq_no_prefetch = ucmd.sq_no_prefetch; err =set_user_sq_size (dev, qp, &ucmd);@@ -760,6 +770,11 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err_mtt; } }else { + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp,0 ); +if (err) + goto err; + qp->sq_no_prefetch =0 ;if (init_attr->create_flags &IB_QP_CREATE_IPOIB_UD_LSO )@@ -1657,6 +1672,9 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, } } +if (qp->inl_recv_sz) + context->param3 |=cpu_to_be32 (1 <<25 ); +if (ibqp->qp_type ==IB_QPT_GSI || ibqp->qp_type ==IB_QPT_SMI ) context->mtu_msgmax = (IB_MTU_4096 <<5 ) |11 ;else if (ibqp->qp_type ==IB_QPT_RAW_PACKET )include/uapi/rdma/mlx4-abi.h +2
-2@@ -101,7 +101,8 @@ struct mlx4_ib_create_qp {__u8 log_sq_bb_count;__u8 log_sq_stride;__u8 sq_no_prefetch; -__u8 reserved[5 ]; +__u32 inl_recv_sz; + __u8 reserved; };#endif /* MLX4_ABI_USER_H */ --
Quoted 2 lines
2.13.1
Hi, Leon
I have a questions:
1. It will be enabled by attr_mask by defining the MACRO in libibverbs.so in next future? For example, IB_RECV_INLINE
thanks
Lijun Ou
Quoted 7 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 43e0de1a-7d1f-9ee5-6f8e-3a09fc7cc19c-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Quoted 174 lines · oulijun
Quoted 173 lines · Leon Romanovsky
From: Maor Gottlieb <maorg-VPRAkNaXOzVWk0Htik3J/[email protected]>
When inline-receive is enabled, the HCA may write received data into the receive WQE.
Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE.
The completion report will indicate that the payload was placed to the WQE.
It includes:
1) Return maximum supported size of inline-receive by the hardware inquery_devicevendor's data part.
2) Enable the feature when requested by the vendor data input.Signed-off-by Leon Romanovsky <[email protected]>---
Hi Doug,This patch is based on commit
4931c6ef04b4("net/mlx4_en: Optimized single ring steering") from Dave's net-nextThanks
--- drivers/infiniband/hw/mlx4/main.c | 7 +++++++ drivers/infiniband/hw/mlx4/mlx4_ib.h | 3 +++ drivers/infiniband/hw/mlx4/qp.c | 32 +++++++++++++++++++++++++------- include/uapi/rdma/mlx4-abi.h | 3 ++- 4 files changed, 37 insertions(+), 8 deletions(-)drivers/infiniband/hw/mlx4/main.c +7
-0@@ -563,6 +563,13 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, } } +if (uhw->outlen >= resp.response_length + +sizeof (resp.max_inl_recv_sz)) { + resp.response_length +=sizeof (resp.max_inl_recv_sz); + resp.max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); + } +if (uhw->outlen) { err =ib_copy_to_udata (uhw, &resp, resp.response_length);if (err)drivers/infiniband/hw/mlx4/mlx4_ib.h +3
-0@@ -319,6 +319,7 @@ struct mlx4_ib_qp {u8 sq_no_prefetch;u8 state;int mlx_type; +u32 inl_recv_sz;struct list_head gid_list;struct list_head steering_rules;struct mlx4_ib_buf *sqp_proxy_rcv;@@ -624,6 +625,8 @@ struct mlx4_uverbs_ex_query_device_resp {__u32 comp_mask;__u32 response_length;__u64 hca_core_clock_offset; +__u32 max_inl_recv_sz; +__u32 reserved; };static inline struct mlx4_ib_dev *to_mdev (struct ib_device *ibdev)drivers/infiniband/hw/mlx4/qp.c +25
-7@@ -377,7 +377,8 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags) }static int set_rq_size (struct mlx4_ib_dev *dev,struct ib_qp_cap *cap, -int is_user,int has_rq,struct mlx4_ib_qp *qp) +int is_user,int has_rq,struct mlx4_ib_qp *qp, +u32 inl_recv_sz) {/* Sanity check RQ size before proceeding */ if (cap->max_recv_wr > dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE ||@@ -385,18 +386,24 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,return -EINVAL ;if (!has_rq) { -if (cap->max_recv_wr) +if (cap->max_recv_wr || inl_recv_sz)return -EINVAL ; qp->rq.wqe_cnt = qp->rq.max_gs =0 ; }else { +u32 max_inl_recv_sz = dev->dev->caps.max_rq_sg * +sizeof (struct mlx4_wqe_data_seg ); +u32 wqe_size; +/* HW requires >= 1 RQ entry with >= 1 gather entry */ -if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge)) +if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge || + inl_recv_sz > max_inl_recv_sz))return -EINVAL ; qp->rq.wqe_cnt =roundup_pow_of_two (max (1U , cap->max_recv_wr)); qp->rq.max_gs =roundup_pow_of_two (max (1U , cap->max_recv_sge)); - qp->rq.wqe_shift =ilog2 (qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg )); + wqe_size = qp->rq.max_gs *sizeof (struct mlx4_wqe_data_seg ); + qp->rq.wqe_shift =ilog2 (max_t (u32, wqe_size, inl_recv_sz)); }/* leave userspace return values as they were, so as not to break ABI */ @@ -719,9 +726,6 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,if (init_attr->sq_sig_type ==IB_SIGNAL_ALL_WR ) qp->sq_signal_bits =cpu_to_be32 (MLX4_WQE_CTRL_CQ_UPDATE ); - err =set_rq_size (dev, &init_attr->cap, !!pd->uobject,qp_has_rq (init_attr), qp); -if (err) - goto err;if (pd->uobject) {struct mlx4_ib_create_qp ucmd;@@ -731,6 +735,12 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err; } + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp, ucmd.inl_recv_sz); +if (err) + goto err; + + qp->inl_recv_sz = ucmd.inl_recv_sz; qp->sq_no_prefetch = ucmd.sq_no_prefetch; err =set_user_sq_size (dev, qp, &ucmd);@@ -760,6 +770,11 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err_mtt; } }else { + err =set_rq_size (dev, &init_attr->cap, !!pd->uobject, +qp_has_rq (init_attr), qp,0 ); +if (err) + goto err; + qp->sq_no_prefetch =0 ;if (init_attr->create_flags &IB_QP_CREATE_IPOIB_UD_LSO )@@ -1657,6 +1672,9 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, } } +if (qp->inl_recv_sz) + context->param3 |=cpu_to_be32 (1 <<25 ); +if (ibqp->qp_type ==IB_QPT_GSI || ibqp->qp_type ==IB_QPT_SMI ) context->mtu_msgmax = (IB_MTU_4096 <<5 ) |11 ;else if (ibqp->qp_type ==IB_QPT_RAW_PACKET )include/uapi/rdma/mlx4-abi.h +2
-1@@ -101,7 +101,8 @@ struct mlx4_ib_create_qp {__u8 log_sq_bb_count;__u8 log_sq_stride;__u8 sq_no_prefetch; -__u8 reserved[5 ]; +__u32 inl_recv_sz; +__u8 reserved; };
Quoted 8 lines
Quoted 4 lines
include/uapi/rdma/mlx4-abi.h +0
-1#endif /* MLX4_ABI_USER_H */ --2.13.1
Hi, Leon
I have a questions:
1. It will be enabled byattr_maskby defining the MACRO in libibverbs.so in next future? For example,IB_RECV_INLINE
This feature was exposed via private include/uapi/rdma/mlx4-abi.h and will be used in our direct verbs without any changes to libibverbs and flows. The user of this feature is supposed to work with mlx4dv header directly.
Thanks
Quoted 12 lines
thanks
Lijun OuQuoted 7 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html.