Skip to contentSkip to conversation

video: add STM32 LTDC display controller

PATCH New Philippe CORNU 2 participants 5 messages Aug 3, 2017 – Aug 28, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover video: add STM32 LTDC display controller

Version 1:
- Initial commit

The purpose of this set of patches is to add the STM32 LTDC display controller support.
In preamble, a configuration switch is added for pwm-based backlights and a new gpio-based backlight driver is proposed.

Patrick Delaunay (2):
dm: backlight: Add CONFIG_BACKLIGHT_PWM
dm: backlight: Add a driver for GPIO backlight

Philippe CORNU (1):
video: add STM32 LTDC display controller

 drivers/video/Kconfig            |  23 +++
 drivers/video/Makefile           |   6 +-
 drivers/video/backlight_gpio.c   |  74 +++++++
 drivers/video/stm32/Kconfig      |  44 +++++
 drivers/video/stm32/Makefile     |  10 +
 drivers/video/stm32/stm32_ltdc.c | 406 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 560 insertions(+), 3 deletions(-)
 create mode 100644 drivers/video/backlight_gpio.c
 create mode 100644 drivers/video/stm32/Kconfig
 create mode 100644 drivers/video/stm32/Makefile
 create mode 100644 drivers/video/stm32/stm32_ltdc.c
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/3 dm: backlight: Add CONFIG_BACKLIGHT_PWM

From: Patrick Delaunay <[email protected]>

Add a config to select individually the driver for PWM backlights. Manage "depends on" to be backyard compatible.

---
 drivers/video/Kconfig  | 11 +++++++++++
 drivers/video/Makefile |  4 +---
 2 files changed, 12 insertions(+), 3 deletions(-)
drivers/video/Kconfig +11 -0
index 61dfed8..da23d39 100644
@@ -14,6 +14,17 @@ config DM_VIDEO
 	  option compiles in the video uclass and routes all LCD/video access
 	  through this.
 
+config BACKLIGHT_PWM
+	bool "Generic PWM based Backlight Driver"
+	depends on DM_VIDEO && DM_PWM
+	default y
+	help
+	  If you have a LCD backlight adjustable by PWM, say Y to enable
+	  this driver.
+	  This driver can be use with "simple-panel" and
+	  it understands the standard device tree
+	  (leds/backlight/pwm-backlight.txt)
+
 config VIDEO_BPP8
 	bool "Support 8-bit-per-pixel displays"
 	depends on DM_VIDEO
drivers/video/Makefile +1 -3
index ac5371f..3839433 100644
@@ -11,9 +11,7 @@ obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o
 obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
 obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
 obj-$(CONFIG_DM_VIDEO) += video_bmp.o
-ifdef CONFIG_DM_VIDEO
-obj-$(CONFIG_DM_PWM) += pwm_backlight.o
-endif
+obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o
 obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o
 obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
 obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
Signature · 1 line
1.9.1
#2 lore raw

PATCH 2/3 dm: backlight: Add a driver for GPIO backlight

In reply to Philippe CORNU

From: Patrick Delaunay <[email protected]>

Add a driver for GPIO backlights.
It understands the standard device tree binding. It can be used with simple-panel when PWM is not necessary.

---
 drivers/video/Kconfig          | 10 ++++++
 drivers/video/Makefile         |  1 +
 drivers/video/backlight_gpio.c | 74 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 drivers/video/backlight_gpio.c
drivers/video/Kconfig +10 -0
index da23d39..32dc8ea 100644
@@ -25,6 +25,16 @@ config BACKLIGHT_PWM
 	  it understands the standard device tree
 	  (leds/backlight/pwm-backlight.txt)
 
+config BACKLIGHT_GPIO
+	bool "Generic GPIO based Backlight Driver"
+	depends on DM_VIDEO
+	help
+	  If you have a LCD backlight adjustable by GPIO, say Y to enable
+	  this driver.
+	  This driver can be used with "simple-panel" and
+	  it understands the standard device tree
+	  (leds/backlight/gpio-backlight.txt)
+
 config VIDEO_BPP8
 	bool "Support 8-bit-per-pixel displays"
 	depends on DM_VIDEO
drivers/video/Makefile +1 -0
index 3839433..d6df709 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
 obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
 obj-$(CONFIG_DM_VIDEO) += video_bmp.o
 obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o
+obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o
 obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o
 obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
 obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
drivers/video/backlight_gpio.c new file +74 -0

74 lines not on this page · raw message

Signature · 1 line
1.9.1
#3 lore raw

PATCH 3/3 video: add STM32 LTDC display controller

In reply to Philippe CORNU

The STM32 LTDC display controller provides a parallel digital RGB and signals for horizontal, vertical synchronization, Pixel Clock and Data Enable as output to interface directly to a variety of LCD and TFT panels.

The LTDC main features are:
- 24-bit RGB Parallel Pixel Output, Programmable timings & polarity for HSync, VSync and Data Enable.
- 2 layers with Blending, Color Keying, Window position & size, Dithering, Background color, Color Look-Up Table (CLUT).
- Supported layer color formats: ARGB8888, RGB888, RGB565, ARGB1555, ARGB4444, L8 CLUT, AL44 & AL88

This LTDC driver:
- supports: RGB parallel output with timings & polarity, 1 layer in RGB565.
- supports but with hard-coded configurations: blending, window position & size (crop), background color.
- does not support yet: rgb888, argb8888, 8-bit clut, dithering.

This LTDC driver is compatible with all stm32 platforms with the LTDC IP and has been tested on stm32 f746-disco board.

---
 drivers/video/Kconfig            |   2 +
 drivers/video/Makefile           |   1 +
 drivers/video/stm32/Kconfig      |  44 +++++
 drivers/video/stm32/Makefile     |  10 +
 drivers/video/stm32/stm32_ltdc.c | 406 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 463 insertions(+)
 create mode 100644 drivers/video/stm32/Kconfig
 create mode 100644 drivers/video/stm32/Makefile
 create mode 100644 drivers/video/stm32/stm32_ltdc.c
drivers/video/Kconfig +2 -0
index 32dc8ea..ecaf613 100644
@@ -457,6 +457,8 @@ config VIDEO_SANDBOX_SDL
 	  console device and can display stdout output. Within U-Boot is is
 	  a normal bitmap display and can display images as well as text.
 
+source "drivers/video/stm32/Kconfig"
+
 config VIDEO_TEGRA20
 	bool "Enable LCD support on Tegra20"
 	depends on OF_CONTROL
drivers/video/Makefile +1 -0
index d6df709..a1a5309 100644
@@ -60,6 +60,7 @@ obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
 obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
 obj-${CONFIG_EXYNOS_FB} += exynos/
 obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
+obj-${CONFIG_VIDEO_STM32} += stm32/
 
 obj-y += bridge/
 obj-y += sunxi/
drivers/video/stm32/Kconfig new file +44 -0

44 lines not on this page · raw message

drivers/video/stm32/Makefile new file +10 -0
new file mode 100644
index 0000000..372a2e1
@@ -0,0 +1,10 @@
+#
+# Copyright (C) STMicroelectronics SA 2017
+#
+# Authors: Philippe Cornu <[email protected]>
+#          Yannick Fertre <[email protected]>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-${CONFIG_VIDEO_STM32} = stm32_ltdc.o
drivers/video/stm32/stm32_ltdc.c new file +406 -0

406 lines not on this page · raw message

Signature · 1 line
1.9.1
#4 lore raw

cover video: add STM32 LTDC display controller

In reply to Philippe CORNU

Hi Philippe,

Quoted 15 lines · On Thu, 3 Aug 2017 12:36:05 +0200 Philippe CORNU philippe.cornu at st.com wrote:

Version 1:
- Initial commit

The purpose of this set of patches is to add the STM32 LTDC display controller support.
In preamble, a configuration switch is added for pwm-based backlights and a new gpio-based backlight driver is proposed.

Patrick Delaunay (2):
dm: backlight: Add CONFIG_BACKLIGHT_PWM
dm: backlight: Add a driver for GPIO backlight

Philippe CORNU (1):
video: add STM32 LTDC display controller

Quoted 12 lines
 drivers/video/Kconfig            |  23 +++
 drivers/video/Makefile           |   6 +-
 drivers/video/backlight_gpio.c   |  74 +++++++
 drivers/video/stm32/Kconfig      |  44 +++++
 drivers/video/stm32/Makefile     |  10 +
 drivers/video/stm32/stm32_ltdc.c | 406 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 560 insertions(+), 3 deletions(-)
 create mode 100644 drivers/video/backlight_gpio.c
 create mode 100644 drivers/video/stm32/Kconfig
 create mode 100644 drivers/video/stm32/Makefile
 create mode 100644 drivers/video/stm32/stm32_ltdc.c

Series applied to u-boot-video/next. Thanks!

--
Anatolij