Skip to contentSkip to conversation

Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig

PATCH In review Adam Ford 3 participants 3 messages Aug 11, 2017 – Sep 2, 2017

Subsystems (3)
Arm (32-bit) Arm sub-architectures OMAP2+ support
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig

This converts the following to Kconfig:
CONFIG_SPL_OMAP3_ID_NAND

Signed-off-by Adam Ford <[email protected]>
---
 README                            | 4 ----
 arch/arm/mach-omap2/Kconfig       | 1 +
 arch/arm/mach-omap2/omap3/Kconfig | 6 ++++++
 include/configs/cm_t35.h          | 1 -
 include/configs/omap3_beagle.h    | 1 -
 include/configs/omap3_cairo.h     | 1 -
 include/configs/omap3_evm.h       | 1 -
 include/configs/omap3_igep00x0.h  | 1 -
 include/configs/omap3_logic.h     | 2 --
 include/configs/tao3530.h         | 1 -
 scripts/config_whitelist.txt      | 1 -
 11 files changed, 7 insertions(+), 13 deletions(-)
README +0 -4
index 3735916..22294bf 100644
@@ -3028,10 +3028,6 @@ FIT uImage format:
 		Define this if you need to first read the OOB and then the
 		data. This is used, for example, on davinci platforms.
 
-		CONFIG_SPL_OMAP3_ID_NAND
-		Support for an OMAP3-specific set of functions to return the
-		ID and MFR of the first attached NAND chip, if present.
-
 		CONFIG_SPL_RAM_DEVICE
 		Support for running image already present in ram, in SPL binary
arch/arm/mach-omap2/Kconfig +1 -0
index 89c91d1..533261c 100644
@@ -20,6 +20,7 @@ config OMAP34XX
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SUPPORT
+	imply SPL_OMAP3_ID_NAND
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
 	imply SYS_I2C_OMAP24XX
arch/arm/mach-omap2/omap3/Kconfig +6 -0
index 7b298d6..b90cade 100644
@@ -149,6 +149,12 @@ config TARGET_SNIPER
 
 endchoice
 
+config SPL_OMAP3_ID_NAND
+	bool "Support OMAP3-specific ID and MFR function"
+	help
+	  Support for an OMAP3-specific set of functions to return the
+	  ID and MFR of the first attached NAND chip, if present.
+
 config SYS_SOC
 	default "omap3"
include/configs/cm_t35.h +0 -1
index f8f3c92..31c8389 100644
@@ -260,7 +260,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
include/configs/omap3_beagle.h +0 -1
index a87a75e..16951bd 100644
@@ -258,7 +258,6 @@
 #define CONFIG_OMAP3_SPI
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
include/configs/omap3_cairo.h +0 -1
index 4f8ce54..30eaf50 100644
@@ -183,7 +183,6 @@
 #define CONFIG_OMAP3_SPI
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
include/configs/omap3_evm.h +0 -1
index bc859c8..234cfe8 100644
@@ -305,7 +305,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /*
include/configs/omap3_igep00x0.h +0 -1
index 39f1e54..5ad354f 100644
@@ -97,7 +97,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
 
 /* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
include/configs/omap3_logic.h +0 -2
index e5ffb85..8a26536 100644
@@ -259,8 +259,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_OMAP3_ID_NAND
-
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_CMD_SPL_NAND_OFS		0x240000
include/configs/tao3530.h +0 -1
index 1f36ac6..4da0c4b 100644
@@ -241,7 +241,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
scripts/config_whitelist.txt +0 -1
index 4689d63..f90e0f7 100644
@@ -2267,7 +2267,6 @@ CONFIG_SPL_NAND_SIMPLE
 CONFIG_SPL_NAND_SOFTECC
 CONFIG_SPL_NAND_WORKSPACE
 CONFIG_SPL_NO_CPU_SUPPORT_CODE
-CONFIG_SPL_OMAP3_ID_NAND
 CONFIG_SPL_PAD_TO
 CONFIG_SPL_PANIC_ON_RAW_IMAGE
 CONFIG_SPL_PBL_PAD
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig

Quoted 4 lines · Adam Ford

This converts the following to Kconfig:
CONFIG_SPL_OMAP3_ID_NAND

Signed-off-by Adam Ford <[email protected]>
Quoted 13 lines
---
 README                            | 4 ----
 arch/arm/mach-omap2/Kconfig       | 1 +
 arch/arm/mach-omap2/omap3/Kconfig | 6 ++++++
 include/configs/cm_t35.h          | 1 -
 include/configs/omap3_beagle.h    | 1 -
 include/configs/omap3_cairo.h     | 1 -
 include/configs/omap3_evm.h       | 1 -
 include/configs/omap3_igep00x0.h  | 1 -
 include/configs/omap3_logic.h     | 2 --
 include/configs/tao3530.h         | 1 -
 scripts/config_whitelist.txt      | 1 -
 11 files changed, 7 insertions(+), 13 deletions(-)
Reviewed-by Simon Glass <[email protected]>
#2 lore raw
In reply to Adam Ford
Quoted 5 lines · Adam Ford

This converts the following to Kconfig:
CONFIG_SPL_OMAP3_ID_NAND

Signed-off-by Adam Ford <[email protected]>
Reviewed-by Simon Glass <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170901/aba4601c/attachment.sig>