Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
Subsystems (5)
Arm (32-bit) Arm sub-architectures Memory technology devices (MTD) OMAP2+ support +1 more subsystems
PATCH v4 1/1 Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
This converts the following to Kconfig:
CONFIG_NAND_OMAP_GPMC
CONFIG_NAND_OMAP_GPMC_PREFETCH
CONFIG_NAND_OMAP_ELM
CONFIG_SPL_NAND_AM33XX_BCH
CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2PLUS only)
Signed-off-by Adam Ford <[email protected]>
---
V4: Fix missing data from V2-V3
V3: Remove selection from CMD_NAND
V2: Rebased on latest Master
Fixed a few missing entries where some features lacked dependancies
arch/arm/mach-omap2/Kconfig | 18 +++++++++++++ configs/am335x_baltos_defconfig | 2 +- configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_hs_evm_defconfig | 1 + configs/am3517_crane_defconfig | 2 ++ configs/am3517_evm_defconfig | 1 + configs/chiliboard_defconfig | 2 +- configs/cm_t3517_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/eco5pk_defconfig | 1 + configs/mcx_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/omap3_evm_defconfig | 1 + configs/omap3_ha_defconfig | 2 ++ configs/tao3530_defconfig | 2 ++ configs/ti816x_evm_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/twister_defconfig | 1 + drivers/mtd/nand/Kconfig | 47 +++++++++++++++++++++++++++++++++- include/configs/am335x_evm.h | 6 ----- include/configs/am335x_igep003x.h | 1 - include/configs/am3517_crane.h | 2 -- include/configs/am3517_evm.h | 3 --- include/configs/am43xx_evm.h | 5 ---- include/configs/baltos.h | 3 --- include/configs/bav335x.h | 5 ---- include/configs/brppt1.h | 3 --- include/configs/chiliboard.h | 6 ----- include/configs/cm_t35.h | 2 -- include/configs/cm_t3517.h | 1 - include/configs/cm_t43.h | 1 - include/configs/dra7xx_evm.h | 5 ---- include/configs/mcx.h | 2 -- include/configs/omap3_beagle.h | 1 - include/configs/omap3_cairo.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/omap3_igep00x0.h | 1 - include/configs/omap3_logic.h | 2 -- include/configs/pengwyn.h | 2 -- include/configs/siemens-am33x-common.h | 3 --- include/configs/tam3517-common.h | 3 --- include/configs/tao3530.h | 2 -- include/configs/ti816x_evm.h | 4 --- include/configs/ti_am335x_common.h | 4 --- include/configs/ti_armv7_omap.h | 1 - include/configs/ti_omap3_common.h | 1 - include/configs/ti_omap4_common.h | 4 --- include/configs/ti_omap5_common.h | 4 --- include/configs/tricorder.h | 2 -- scripts/config_whitelist.txt | 4 --- 53 files changed, 87 insertions(+), 88 deletions(-)
arch/arm/mach-omap2/Kconfig +18 -0
@@ -11,6 +11,7 @@ config OMAP34XX select ARM_ERRATA_621766 select ARM_ERRATA_725233 select USE_TINY_PRINTF + imply NAND_OMAP_GPMC imply SPL_EXT_SUPPORT imply SPL_FAT_SUPPORT imply SPL_GPIO_SUPPORT
@@ -19,6 +20,7 @@ config OMAP34XX imply SPL_LIBDISK_SUPPORT imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT + imply SPL_NAND_SIMPLE imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT
@@ -29,6 +31,8 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" select USE_TINY_PRINTF + imply NAND_OMAP_ELM + imply NAND_OMAP_GPMC imply SPL_DISPLAY_PRINT imply SPL_EXT_SUPPORT imply SPL_FAT_SUPPORT
@@ -38,6 +42,7 @@ config OMAP44XX imply SPL_LIBDISK_SUPPORT imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT + imply SPL_NAND_AM33XX_BCH imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT
@@ -48,6 +53,8 @@ config OMAP54XX bool "OMAP54XX SoC" select ARM_ERRATA_798870 select SYS_THUMB_BUILD + imply NAND_OMAP_ELM + imply NAND_OMAP_GPMC imply SPL_DISPLAY_PRINT imply SPL_ENV_SUPPORT imply SPL_EXT_SUPPORT
@@ -58,6 +65,7 @@ config OMAP54XX imply SPL_LIBDISK_SUPPORT imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT + imply SPL_NAND_AM33XX_BCH imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT
@@ -72,6 +80,8 @@ config TI814X config TI816X bool "TI816X SoC" + imply NAND_OMAP_ELM + imply NAND_OMAP_GPMC help Support for AM335x SOC from Texas Instruments. The AM335x high performance SOC features a Cortex-A8
@@ -79,8 +89,12 @@ config TI816X config AM43XX bool "AM43XX SoC" + imply NAND_OMAP_ELM + imply NAND_OMAP_GPMC imply SPL_DM imply SPL_DM_SEQ_ALIAS + imply SPL_NAND_AM33XX_BCH + imply SPL_NAND_SUPPORT imply SPL_OF_CONTROL imply SPL_OF_TRANSLATE imply SPL_SEPARATE_BSS
@@ -96,6 +110,10 @@ config AM43XX config AM33XX bool "AM33XX SoC" + imply NAND_OMAP_ELM + imply NAND_OMAP_GPMC + imply SPL_NAND_AM33XX_BCH + imply SPL_NAND_SUPPORT imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD imply USE_TINY_PRINTF
configs/am335x_baltos_defconfig +1 -1
@@ -8,7 +8,6 @@ CONFIG_TARGET_AM335X_BALTOS=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FAT_SUPPORT=y
@@ -51,6 +50,7 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y
configs/am335x_evm_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y
configs/am335x_evm_nor_defconfig +1 -0
@@ -27,6 +27,7 @@ CONFIG_DFU_RAM=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD_NOR_FLASH=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y
configs/am335x_evm_usbspl_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_DFU_NAND=y CONFIG_DFU_RAM=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y
configs/am335x_hs_evm_defconfig +1 -0
@@ -38,6 +38,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y
configs/am3517_crane_defconfig +2 -0
@@ -15,6 +15,8 @@ CONFIG_SYS_PROMPT="AM3517_CRANE # " # CONFIG_CMD_FPGA is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set
configs/am3517_evm_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_SPL_PARTITION_UUIDS=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y
configs/chiliboard_defconfig +1 -1
@@ -7,7 +7,6 @@ CONFIG_TARGET_CHILIBOARD=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FAT_SUPPORT=y
@@ -41,6 +40,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y
configs/cm_t3517_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y
configs/cm_t35_defconfig +1 -0
@@ -39,6 +39,7 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y
configs/eco5pk_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
configs/mcx_defconfig +1 -0
@@ -35,6 +35,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
configs/mt_ventoux_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
configs/omap3_evm_defconfig +1 -0
@@ -45,6 +45,7 @@ CONFIG_SPL_DM=y CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y +CONFIG_NAND=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y
configs/omap3_ha_defconfig +2 -0
@@ -25,6 +25,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y
configs/tao3530_defconfig +2 -0
@@ -25,6 +25,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y
configs/ti816x_evm_defconfig +1 -0
@@ -43,6 +43,7 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_OMAP24XX=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y # CONFIG_USE_PRIVATE_LIBGCC is not set
configs/tricorder_defconfig +1 -0
@@ -35,5 +35,6 @@ CONFIG_LED_STATUS_BIT2=4 CONFIG_LED_STATUS_STATE2=2 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/tricorder_flash_defconfig +1 -0
@@ -34,5 +34,6 @@ CONFIG_LED_STATUS_BIT2=4 CONFIG_LED_STATUS_STATE2=2 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/twister_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC_PREFETCH=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
drivers/mtd/nand/Kconfig +46 -1
71 lines not on this page · raw message
include/configs/am335x_evm.h +0 -6
@@ -202,9 +202,6 @@#define CONFIG_SYS_NAND_OOBSIZE 64#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)/* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_GPMC_PREFETCH -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -232,9 +229,6 @@ "-(NAND.file-system)"#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_AM33XX_BCH -#endif #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000/* kernel offset */ #endif
include/configs/am335x_igep003x.h +0 -1
@@ -113,7 +113,6 @@#define CONFIG_PHY_SMSC /* NAND support */ -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_ONFI_DETECTION 1#define CONFIG_MTD_PARTITIONS
include/configs/am3517_crane.h +0 -2
@@ -211,7 +211,6 @@/* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_NAND_OMAP_GPMC #define SMNAND_ENV_OFFSET 0x260000/* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)/* 128 KiB sector */
@@ -242,7 +241,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE)
include/configs/am3517_evm.h +0 -3
@@ -103,8 +103,6 @@/* Board NAND Info. */ #ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_BCH #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */
@@ -290,7 +288,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200000#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE)
include/configs/am43xx_evm.h +0 -5
@@ -256,8 +256,6 @@ CONFIG_SYS_NAND_PAGE_SIZE)#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
@@ -299,9 +297,6 @@ "-(NAND.file-system)"#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_AM33XX_BCH -#endif /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000/* kernel offset */
include/configs/baltos.h +0 -3
@@ -242,9 +242,6 @@#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ #ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_GPMC_PREFETCH -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE)
include/configs/bav335x.h +0 -5
@@ -355,8 +355,6 @@ DEFAULT_LINUX_BOOT_ENV \#define CONFIG_SYS_NAND_OOBSIZE 64#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)/* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS#define CONFIG_SYS_NAND_ECCPOS { \ 2, 3, 4, 5, 6, 7, 8, 9, \
@@ -389,9 +387,6 @@ DEFAULT_LINUX_BOOT_ENV \#define CONFIG_ENV_OFFSET_REDUND 0x001e0000#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_AM33XX_BCH -#endif #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000/* kernel offset */ #endif
include/configs/brppt1.h +0 -3
@@ -71,7 +71,6 @@#endif /* CONFIG_SPL_OS_BOOT */ #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
@@ -184,9 +183,7 @@ MMCARGS*/ #define CONFIG_SYS_MAX_NAND_DEVICE 1#define CONFIG_SYS_NAND_BASE 0x8000000 -#define CONFIG_NAND_OMAP_GPMC /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ -#define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
include/configs/chiliboard.h +0 -6
@@ -135,9 +135,6 @@#define CONFIG_SYS_NAND_OOBSIZE 64#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)/* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_GPMC_PREFETCH -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -165,9 +162,6 @@ "-(NAND.file-system)"#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_AM33XX_BCH -#endif /* USB configuration */ #define CONFIG_USB_MUSB_DSPS
include/configs/cm_t35.h +0 -2
@@ -106,7 +106,6 @@/* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */
@@ -250,7 +249,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
include/configs/cm_t3517.h +0 -1
@@ -109,7 +109,6 @@/* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */
include/configs/cm_t43.h +0 -1
@@ -25,7 +25,6 @@#endif /* NAND support */ -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_SIZE 2048
include/configs/dra7xx_evm.h +0 -5
@@ -166,8 +166,6 @@ CONFIG_SYS_NAND_PAGE_SIZE)#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
@@ -194,9 +192,6 @@ "-(NAND.file-system)"#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_AM33XX_BCH -#endif /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000/* kernel offset */
include/configs/mcx.h +0 -2
@@ -250,8 +250,6 @@/* **** PISMO SUPPORT *** */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define SMNAND_ENV_OFFSET 0x180000/* environment starts here */ /* Redundant Environment */
include/configs/omap3_beagle.h +0 -1
@@ -75,7 +75,6 @@/* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND */ /* devices */
include/configs/omap3_cairo.h +0 -1
@@ -57,7 +57,6 @@/* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND */ /* devices */ #define CONFIG_EXTRA_ENV_SETTINGS \
include/configs/omap3_evm.h +0 -1
@@ -49,7 +49,6 @@/* NAND */ #if defined(CONFIG_NAND ) -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_FLASH_BASE NAND_BASE#define CONFIG_SYS_MAX_NAND_DEVICE 1#define CONFIG_BCH
include/configs/omap3_igep00x0.h +0 -1
@@ -137,7 +137,6 @@#define CONFIG_SYS_NAND_ECCSIZE 512#define CONFIG_SYS_NAND_ECCBYTES 14#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_BCH /* UBI configuration */
include/configs/omap3_logic.h +0 -2
@@ -65,8 +65,6 @@/* Board NAND Info. */ #ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of */
include/configs/pengwyn.h +0 -2
@@ -113,8 +113,6 @@/* SPL */ /* NAND support */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM /* NAND Configuration. */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE
include/configs/siemens-am33x-common.h +0 -3
@@ -119,7 +119,6 @@#define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SPL_NAND_AM33XX_BCH #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
@@ -511,8 +510,6 @@"512k(mtdoops)," \"-(configuration)" -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address *//* to access nand@*/ /* CS0 */
include/configs/tam3517-common.h +0 -3
@@ -130,7 +130,6 @@*/ /* **** PISMO SUPPORT *** */ -#define CONFIG_NAND_OMAP_GPMC #define SMNAND_ENV_OFFSET 0x180000/* environment starts here */ /* Redundant Environment */
@@ -163,7 +162,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_CONSOLE -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000/* below BSS */
@@ -207,7 +205,6 @@#define CONFIG_SYS_NAND_ECCSIZE 256#define CONFIG_SYS_NAND_ECCBYTES 3#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW -#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
include/configs/tao3530.h +0 -2
@@ -81,7 +81,6 @@/* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */
@@ -231,7 +230,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
include/configs/ti816x_evm.h +0 -4
@@ -66,7 +66,6 @@#define CONFIG_SYS_MAX_NAND_DEVICE 1/* NAND: SPL related configs */ -#define CONFIG_SPL_NAND_AM33XX_BCH /* NAND: device related configs */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -77,8 +76,6 @@#define CONFIG_SYS_NAND_OOBSIZE 64#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)/* NAND: driver related configs */ -#define CONFIG_NAND_OMAP_GPMC_PREFETCH -#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -111,7 +108,6 @@/* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ #define CONFIG_SPL_TEXT_BASE 0x40400000#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE)
include/configs/ti_am335x_common.h +0 -4
@@ -74,10 +74,6 @@* s_init when we have SPL used. */ -#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -#endif -/* Now bring in the rest of the common code. */ #include <configs/ti_armv7_omap.h>
include/configs/ti_armv7_omap.h +0 -1
@@ -21,7 +21,6 @@* access CS0 at is 0x8000000. */ #ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC #ifndef CONFIG_SYS_NAND_BASE #define CONFIG_SYS_NAND_BASE 0x8000000#endif
include/configs/ti_omap3_common.h +0 -1
@@ -64,7 +64,6 @@ (64 << 20))#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_NAND_BASE 0x30000000#endif
include/configs/ti_omap4_common.h +0 -4
@@ -142,10 +142,6 @@#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -#endif -#ifdef CONFIG_SPL_BUILD /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ #undef CONFIG_SYS_I2C
include/configs/ti_omap5_common.h +0 -4
@@ -103,10 +103,6 @@#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -#endif -#ifdef CONFIG_SPL_BUILD #undef CONFIG_TIMER#endif
include/configs/tricorder.h +0 -2
@@ -84,7 +84,6 @@"2m(fdt)," \ "-(ubi)" -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE/* physical address */
@@ -254,7 +253,6 @@/* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS
scripts/config_whitelist.txt +0 -4
@@ -1578,9 +1578,6 @@ CONFIG_NAND_MXC CONFIG_NAND_MXC_V1_1 CONFIG_NAND_NDFC CONFIG_NAND_OMAP_ECCSCHEME -CONFIG_NAND_OMAP_ELM -CONFIG_NAND_OMAP_GPMC -CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_GPMC_WSCFG CONFIG_NAND_SECBOOT CONFIG_NAND_SPL
@@ -2210,7 +2207,6 @@ CONFIG_SPL_MMC_LOAD CONFIG_SPL_MMC_MINIMAL CONFIG_SPL_MPC83XX_WAIT_FOR_NAND CONFIG_SPL_MXS_PSWITCH_WAIT -CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_BOOT CONFIG_SPL_NAND_DRIVERS
Signature · 1 line
2.7.4