configs/imx7dpico: Bump to 4.13 kernel

deleted file mode 100644
index f2f3561..0000000
@@ -1,430 +0,0 @@
-From 23c787a99ff7b42f594722d60ea064534fe54a71 Mon Sep 17 00:00:00 2001
-From: Vanessa Maegima <[email protected]>
-Date: Wed, 17 May 2017 14:06:36 -0300
-Subject: [PATCH] ARM: dts: imx7d-pico: Add initial support
-
-Add the initial support for imx7d-pico board.
-
-Add support for eMMC, USB host, USB device, PMIC, Ethernet and audio.
-
-For more information about this board, please visit:
-http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
-
-Signed-off-by: Vanessa Maegima <[email protected]>
-Reviewed-by: Fabio Estevam <[email protected]>
-Signed-off-by: Shawn Guo <[email protected]>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23c787a99ff7b42f594722d60ea064534fe54a71
----
- arch/arm/boot/dts/Makefile       |   1 +
- arch/arm/boot/dts/imx7d-pico.dts | 387 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 388 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx7d-pico.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 7881aae..cc12670 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -478,6 +478,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
- 	imx7d-cl-som-imx7.dtb \
- 	imx7d-colibri-eval-v3.dtb \
- 	imx7d-nitrogen7.dtb \
-+	imx7d-pico.dtb \
- 	imx7d-sbc-imx7.dtb \
- 	imx7d-sdb.dtb \
- 	imx7d-sdb-sht11.dtb \
-diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
-new file mode 100644
-index 0000000..ebda3df
---- /dev/null
-+++ b/arch/arm/boot/dts/imx7d-pico.dts
-@@ -0,0 +1,387 @@
-+/*
-+ * Copyright 2017 NXP
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx7d.dtsi"
-+
-+/ {
-+	model = "Technexion Pico i.MX7D Board";
-+	compatible = "technexion,imx7d-pico", "fsl,imx7d";
-+
-+	memory {
-+		reg = <0x80000000 0x80000000>;
-+	};
-+
-+	reg_2p5v: regulator-2p5v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "2P5V";
-+		regulator-min-microvolt = <2500000>;
-+		regulator-max-microvolt = <2500000>;
-+		regulator-always-on;
-+	};
-+
-+	reg_3p3v: regulator-3p3v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "3P3V";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-always-on;
-+	};
-+
-+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb_otg1_vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb_otg2_vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+	};
-+
-+	reg_vref_1v8: regulator-vref-1v8 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vref-1v8";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+	};
-+
-+	sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,name = "imx7-sgtl5000";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,bitclock-master = <&dailink_master>;
-+		simple-audio-card,frame-master = <&dailink_master>;
-+		simple-audio-card,cpu {
-+			sound-dai = <&sai1>;
-+		};
-+
-+		dailink_master: simple-audio-card,codec {
-+			sound-dai = <&codec>;
-+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-+		};
-+	};
-+};
-+
-+&fec1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet1>;
-+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-+	assigned-clock-rates = <0>, <100000000>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ethphy0>;
-+	fsl,magic-packet;
-+	status = "okay";
-+
-+	mdio {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		ethphy0: ethernet-phy at 1 {
-+			compatible = "ethernet-phy-ieee802.3-c22";
-+			reg = <1>;
-+			status = "okay";
-+		};
-+	};
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	codec: sgtl5000 at 0a {
-+		#sound-dai-cells = <0>;
-+		reg = <0x0a>;
-+		compatible = "fsl,sgtl5000";
-+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-+		VDDA-supply = <&reg_2p5v>;
-+		VDDIO-supply = <&reg_vref_1v8>;
-+	};
-+};
-+
-+&i2c4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c4>;
-+	status = "okay";
-+
-+	pmic: pfuze3000 at 08 {
-+		compatible = "fsl,pfuze3000";
-+		reg = <0x08>;
-+
-+		regulators {
-+			sw1a_reg: sw1a {
-+				regulator-min-microvolt = <700000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+			/* use sw1c_reg to align with pfuze100/pfuze200 */
-+			sw1c_reg: sw1b {
-+				regulator-min-microvolt = <700000>;
-+				regulator-max-microvolt = <1475000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw2_reg: sw2 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1850000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3a_reg: sw3 {
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <1650000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			swbst_reg: swbst {
-+				regulator-min-microvolt = <5000000>;
-+				regulator-max-microvolt = <5150000>;
-+			};
-+
-+			snvs_reg: vsnvs {
-+				regulator-min-microvolt = <1000000>;
-+				regulator-max-microvolt = <3000000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vref_reg: vrefddr {
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vgen1_reg: vldo1 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen2_reg: vldo2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen3_reg: vccsd {
-+				regulator-min-microvolt = <2850000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen4_reg: v33 {
-+				regulator-min-microvolt = <2850000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen5_reg: vldo3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen6_reg: vldo4 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+		};
-+	};
-+};
-+
-+&sai1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_sai1>;
-+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-+			  <&clks IMX7D_SAI1_ROOT_CLK>;
-+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-+	assigned-clock-rates = <0>, <24576000>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-+	status = "okay";
-+};
-+
-+&usbotg1 {
-+	vbus-supply = <&reg_usb_otg1_vbus>;
-+	status = "okay";
-+};
-+
-+&usbotg2 {
-+	vbus-supply = <&reg_usb_otg2_vbus>;
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-+	assigned-clock-rates = <400000000>;
-+	bus-width = <8>;
-+	fsl,tuning-step = <2>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&iomuxc {
-+	pinctrl_enet1: enet1grp {
-+		fsl,pins = <
-+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-+		>;
-+	};
-+
-+	pinctrl_i2c1: i2c1grp {
-+		fsl,pins = <
-+			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
-+			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
-+		>;
-+	};
-+
-+	pinctrl_i2c4: i2c4grp {
-+		fsl,pins = <
-+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-+		>;
-+	};
-+
-+	pinctrl_sai1: sai1grp {
-+		fsl,pins = <
-+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
-+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-+		>;
-+	};
-+
-+	pinctrl_uart5: uart5grp {
-+		fsl,pins = <
-+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
-+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
-+		>;
-+	};
-+
-+	pinctrl_usbotg1_pwr: usbotg_pwr {
-+		fsl,pins = <
-+			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
-+		>;
-+	};
-+
-+	pinctrl_usdhc3: usdhc3grp {
-+		fsl,pins = <
-+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-+		>;
-+	};
-+
-+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-+		fsl,pins = <
-+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-+		>;
-+	};
-+
-+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-+		fsl,pins = <
-+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-+		>;
-+	};
-+};
--- 
-2.7.4
-

49 lines not on this page · raw message

deleted file mode 100644
index a23fbc1..0000000
@@ -1,34 +0,0 @@
-From bdc111bd50cc1378e113647dc251689636986d84 Mon Sep 17 00:00:00 2001
-From: Fabio Estevam <[email protected]>
-Date: Tue, 23 May 2017 12:16:09 -0300
-Subject: [PATCH] ARM: dts: imx7d-pico: Pass 'no-1-8-v' property to the eMMC
-
-Currently the following eMMC error is seen:
-
-mmc1: mmc_select_hs200 failed, error -74
-
-On imx7d-pico the eMMC VCCQ is fixed at 3.15V, so pass the 'no-1-8-v'
-property to properly describe that 1.8V operation is not possible.
-
-Signed-off-by: Fabio Estevam <[email protected]>
-Signed-off-by: Shawn Guo <[email protected]>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bdc111bd50cc1378e113647dc251689636986d84
----
- arch/arm/boot/dts/imx7d-pico.dts | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
-index f874352..79b5d83 100644
---- a/arch/arm/boot/dts/imx7d-pico.dts
-+++ b/arch/arm/boot/dts/imx7d-pico.dts
-@@ -279,6 +279,7 @@
- 	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
- 	assigned-clock-rates = <400000000>;
- 	bus-width = <8>;
-+	no-1-8-v;
- 	fsl,tuning-step = <2>;
- 	non-removable;
- 	status = "okay";
--- 
-2.7.4
-

90 lines not on this page · raw message

index 72abfdf..b72d56b 100644
@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, a 4.12 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_12=y
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4"

@@ -12,8 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.12"
-BR2_LINUX_KERNEL_PATCH="board/technexion/imx7dpico/patches/linux"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-pico"