usb: serial: add vid:pid for Cypress WICED dev board
Subsystems (2)
PATCH v9 1/1 usb: serial: add vid:pid for Cypress WICED dev board
From: Jeffrey Chu <[email protected]>
Add CYPRESS_VID vid and CYPRESS_WICED_BT_USB and CYPRESS_WICED_WL_USB device IDs to ftdi_sio driver
Signed-off-by Jeffrey Chu <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 9 insertions(+)
drivers/usb/serial/ftdi_sio.c +2 -0
@@ -1015,6 +1015,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) }, { USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, + { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, { } /* Terminating entry */ };
drivers/usb/serial/ftdi_sio_ids.h +7 -0
@@ -692,6 +692,13 @@#define WICED_USB20706V2_PID 0x6422/* +* Cypress WICED USB UART +*/ +#define CYPRESS_VID 0x04B4 +#define CYPRESS_WICED_BT_USB_PID 0x009B +#define CYPRESS_WICED_WL_USB_PID 0xF900 + +/* * Definitions for ID TECH (www.idt-net.com) devices */ #define IDTECH_VID 0x0ACD/* ID TECH Vendor ID */
--
2.7.4
This message and any attachments may contain confidential information from Cypress or its subsidiaries. If it has been received in error, please advise the sender and immediately delete this message.